Welcome to the 5S and Kanban Training
|
|
|
- Cecily Greene
- 9 years ago
- Views:
Transcription
1 Welcome to the 5S and Kanban Training Five Hills Health Region Presenter: Ed Seman Pursuing Excellence
2 5S Techniques Pursuing Excellence
3 PURPOSE A clean well-organized, visual workplace is fundamental to standardization. Establishing a normal condition makes the abnormal conspicuous. Standardized work depends upon each tool always being in the same place... a place for everything and everything in its place.
4 BY-PRODUCTS OF AN UNORGANIZED WORKPLACE SAFETY Risks due to physical obstacles and hidden hazards Lost Time searching for materials and tools Defects and equipment Breakdowns resulting from a dirty environment Poor Response to internal/external customers Difficulty in Distinguishing between what is good/bad, needed/unneeded, normal/abnormal
5 What is 5S? At its most basic, 5S is a fundamental clean-up of the work environment. 5S makes a place for everything and puts everything in its place. Clean-up leads to improved efficiencies, improved quality, and reduced costs. Makes waste appear immediately so that it can be acted upon.
6 The 5 S s The original S s are actually Japanese words which translate loosely into English as: Sorting (Seiri) Set in order (Seiton) Shining (Seiso) Standardizing (Seiketsu) Sustaining (Shitsuke) All 5 are important to lasting change and success. None on their own can have lasting results.
7 Sorting Sorting Set in Order Shining Standardizing Sustaining Get rid of what is not needed Clear work area and remove all unnecessary items such as: Racks Instruments Containers Equipment, excess supplies Manuals Documentation Be thinking What can we get rid of. Consider the following: Can you find any unnecessary things cluttering up your work area? Are there unnecessary equipment and supplies just left as they are? Are there instruments or supplies left on the floor/table/counter? Are all unnecessary items sorted out, classified, and stored? Are all instruments, equipment, and office equipment properly stored? Is there unnecessary paperwork lying around? Are there duplicates of anything lying around? So how do you accomplish the task of Sorting?
8 Sorting Sorting Set in Order Shining Standardizing Sustaining The Red Tag Strategy is an effective way to accomplish the task of sorting. Form a team with a significant representation from all affected groups. Conduct meeting to lay ground rules and define areas being studied (scope). Team members put red tags on everything within the scope. Allow affected groups to go about normal work - removing tags from equipment as it is utilized. After predetermined time period, round up all items with tags remaining. Conduct a second meeting and verify all tagged items are no longer used. Auction off, give away, or trash unused items. Alternatives include: Tag only items to be eliminated then review with group. Utilize Red Tag Areas and regularly or periodically put things in them.
9 5S - Sort Remove all items not needed from the work area Creates a work environment that Has space Uses less energy Saves time
10 Set in Order Sorting Set in Order Shining Standardizing Sustaining Organize what s left. Arrange and Identify for ease of use. A place for everything and everything in its place. Lines on the floor Signs hung from the ceiling Equipment boards Areas for paperwork Color coded equipment, supplies or forms and workspaces Fix / Repair storage methods and places. Consider the following: Are positions of main corridors, aisles, and storage places clearly marked? Are equipment/office machines divided into specialized use and regular items? Are all supplies always stacked to the proper heights? Is anything stored around fire extinguishers? Does the floor have any obstacles? Are office areas/workstations clearly identified? Do current reports have a place that is identified? So how do you accomplish the task of Storing?
11 Set in Order Sorting Set in Order Shining Standardizing Sustaining Signboards, shadow boards, demarcators, and racks and bins are effective storing techniques. Signboards Boards laying out what is where. Signs with department names or functions Typically placed at entrances or at common areas. Shadow boards Typically equipment boards. Shadows/outlines of tools in their positions. Can be color coded - position to equipment or position to group of equipment. Demarcators White, yellow, red, orange, etc... Tape or paint. Identify pathways, inventory storage, waste locations, safety hazards, etc Can be color coded by function/purpose. Staging areas can be numbered for further identification. Racks and Bins If organized, well planned, and labeled, they can be very effective.
12 5S - Set in Order Arrange items in an easy to use manner Anyone can find them Anyone can put them away The key is anyone Eliminates waste due to searching
13 Shining Sorting Set in Order Shining Standardizing Sustaining Clean up what s left and do it daily Paint, Refurbish, Clean, etc Get all remaining items and spaces into like new condition. This applies to ALL stored items. Much more than a simple clean up. What does that do for me? As some department managers will tell you Points out leaks and other items to be repaired. Promotes careful and regular checking of equipment as it is cleaned. Increases familiarity with equipment. Improves overall morale. Helps create an attitude of pride. Leaves a good impression with patients/visitors Don t let anybody tell you there s no value in that. Perhaps most importantly, it makes the savings come about Without daily cleaning, the organization created to make waste stand out will be lost!
14 5S - Shine Emphasizes mess removal Everything is neat and orderly Easy to say hard to do under stress situations
15 Standardize the new expectation for equipment and techniques. Equipment: Standardizing Sorting Set in Order Shining Standardizing Sustaining Make standard tools for each department / function / machine. Make standard storing techniques throughout department / plant. This will be the new standard for how we run our department/business. Doing so will result in decreased overhead (inventory) and eliminate confusion when switching between lines or departments. Techniques: Make Sort, Storing, and Shining a daily habit Set the rules to make 5S part of everyone s job Assign responsibilities for Sorting, Storing, and Shining Integrate Sort, Storing, and Shining into regular work activities Rules Doing so will eliminate potential friction between co-workers and ensure the complete 5S system works.
16 5S - Standardize Create consistency in task completion Common Knowledge Consistent expectations Easy to follow Train, Train, Train
17 Sorting Set in Order Shining Standardizing Sustaining Make sure the system keeps on working. There are several things which can be done to make sure the 5S system continues to work well after its inception: Continue to develop the system 5 minute 5S Sustaining Involve people in the development of the system. (Get everyone s input and buy-in) Build the system right the first time to eliminate the possibility of discouragement or discontinued use. Include Sustaining in the initial design of the system. As leaders, be sure to follow the rules set by the team. Develop the good habit of Sorting, Storing, Shining, Standardizing, and Sustaining everyday. Then it will become second nature.
18 5S - Sustain Habit of properly maintaining procedures Reward for maintaining is greater than departing Measurable The first four pillars rely on sustain
19 5S - Exposes the Hidden Workplace (SORT) Organize - Get rid of what is not needed (Set in Order or Straighten) Order - Arrange & identify for ease of use (SHINE) Cleanliness on a daily basis (STANDARDIZE) Eliminate cause & standardize methods (SUSTAIN) Discipline to plans & schedules
20 KANBAN Pursuing Excellence
21 KANBAN Definition A production control system that uses cards or visual signals to trigger or control the flow of materials or parts during a process. MILK By Definition: Visual authorization to replenish Used to manage service flow through a process or system Only produce what s needed (consumed) Never pass on a known defect
22 KANBAN EXAMPLES MILK Joe s HARDWARE LP LP LP LP LP 1027
23 Questions?
The title 5S refers to five activities within the tool as follows (in brief):
5S Overview 5S is a methodology for creating and maintaining an organized, clean, and safe high-performance work environment. It is an unusual tool in the Lean Sigma arsenal because it can be used in the
The 5S-Method. The 5S-Method. Clean up and nothing else? or a step further on the ladder of continuous improvement?
The 5S-Method The 5S-Method Clean up and nothing else? or a step further on the ladder of continuous improvement? Page 1 What is 5S? The 5S-Method 5S is: A discipline for creating and maintaining a clutter-free,
Lean process improvement is CDOT s approach for engaging everyone, every day, to improve every process and product, to benefit every customer.
February 2013 Lean process improvement is CDOT s approach for engaging everyone, every day, to improve every process and product, to benefit every customer. A crucial part of the Lean approach is 6S, a
Audit Worksheet Sort
Audit Worksheet Sort Get rid of clutter. Separate out what is needed for the operations. 1. Is the shop environment uncluttered? 1.Tools, material, equipment, is all over the place, nothing has a home.
Clean House With Lean 5S
Clean House With Lean 5S by Christopher D. Chapman Television shows exploring the virtues of better living through organization are ubiquitous. On such popular shows as Mission Organization (Home & Garden
Workplace Color Coding Standards
Workplace Color Coding Standards You won t GET LEAN... until you GET VISUAL! 7381 Ardith Ct., Byron Center, MI 49315 616.583.9400 info@ Why do we use color to communicate? How much information in our daily
A Sheet Plant s Lean Journey
Article Heading Jamestown Container provides a closer look at how its Cleveland, Ohio, plant is tackling lean manufacturing. By Jackie Schultz, Editor A Sheet Plant s Lean Journey ONCE A QUARTER THROUGHOUT
5S Training - Lean Manufacturing Housekeeping
5S Training - The 5s Housekeeping Approach within Lean Manufacturing What Is 5S? 5S is a set of techniques providing a standard approach to housekeeping within Lean Manufacturing. It is often promoted
Appendix Lean Glossary Page 1
Appendix Lean Glossary Page 1 Andon Board A visual control device in a work area giving the current status on performance to expectations and alerting team members to emerging issues. Batch-and- Queue
WEEKLY SAFETY MEETING All Euramax Subsidiaries HOUSEKEEPING. Safety Meeting Contents. Meeting Notice. Leaders Guide. Employee Handout.
Safety Meeting Contents Meeting Notice Leaders Guide Employee Handout Employee Quiz Meeting Sign-In Sheet Employee Puzzle PRIOR TO THE WEEKLY MEETING: - Post the meeting notice by the timeclock - Read
Lean Manufacturing: Part 2. Charles Theisen, CPIM, CIRM. Lean Manufacturing Part 1I
Lean Manufacturing Part 1I 2013 ProcessPro, the ProcessPro logos, and the ProcessPro product and service names mentioned herein are registered trademarks or trademarks of Blaschko Computers, Inc. d.b.a.
Drive Quality: Get the Skinny on Lean
Drive Quality: Get the Skinny on Lean Saturday, May 30 1:15 pm 2:45 pm Meredith A. Alaynick, CIIP, BayCare Health Systems Safwan S. Halabi, MD, Henry Ford Health System George B. Tudder, MS, MBA, CIIP,
5S: GOOD HOUSEKEEPING TECHNIQUES FOR ENHANCING PRODUCTIVITY, QUALITY AND SAFETY AT THE WORKPLACE. No 89/2012
5S: GOOD HOUSEKEEPING TECHNIQUES FOR ENHANCING PRODUCTIVITY, QUALITY AND SAFETY AT THE WORKPLACE Export Quality Bulletin No 89/2012 ii 5S: GOOD HOUSEKEEPING TECHNIQUES FOR ENHANCING PRODUCTIVITY, QUALITY
The Consultants Guide to. Successfully Implementing 5S
The Consultants Guide to Successfully Implementing 5S Norm Bain NBI Email: [email protected] January 2010 Preface When I was first introduced to the 5S system, I thought this is pretty lame. What a convoluted
THE 5S STRATEGY FOR CONTINUOUS IMPROVEMENT OF THE MANUFACTURING PROCESSES IN AUTOCAR EXHAUST
Management & Marketing (2008) Vol. 3, No. 4, pp. 115-120. THE 5S STRATEGY FOR CONTINUOUS IMPROVEMENT OF THE MANUFACTURING PROCESSES IN AUTOCAR EXHAUST Gheorghe DULHAI Gheorghe Asachi Technical University,
Operations Management and Lean Six Sigma. Presented by: David Muncaster Manager, CI and CSAT Staples Advantage Canada
Operations Management and Lean Six Sigma Presented by: David Muncaster Manager, CI and CSAT Staples Advantage Canada Who is this guy standing up in front of you? Manager, Continuous Improvement and CSAT
VISUAL management techniques to create a SAFE workplace environment
You won t GET LEAN... until you GET VISUAL! VISUAL management techniques to create a SAFE workplace environment Organizing a Safe Workplace: Personal Protective Equipment (PPE) Machine/Equipment/Process
Implementing 5S in a laboratory environment. David Ball Peccoud Lab 2/27/2013
Implementing 5S in a laboratory environment David Ball Peccoud Lab 2/27/2013 What is 5S? The 5S system is a tool that supports an operating philosophy that emphasizes discipline, efficiency, and attention
Lunch and Learn The Best of Lean Visual Tools for the Holidays Tools and Techniques for Eliminating Waste and Streamlining Processes
Lunch and Learn The Best of Lean Visual Tools for the Holidays Tools and Techniques for Eliminating Waste and Streamlining Processes Rebecca Altenhoff and Shelly Lizotte 1 Core Competencies Business Consulting
Hessel Visser NCOI Les 6 A P 373. Operations Management, 7E: Chapter 14 en15
1 Lecture Planning and Control 14 Enterprise Resource Planning (ERP) 15 Lean synchronization 16 Project Management (zie andere sheets) 17 Quality Management (zie andere sheets) Hessel Visser NCOI Les 6
Toyota Production System. Lecturer: Stanley B. Gershwin
Toyota Production System Lecturer: Stanley B. Gershwin Primary source: Toyota Production System by Yasuhiro Monden See also: Decoding the DNA of the Toyota Production System by Steven Spear and H. Kent
JUST IN TIME (JIT) CONTEXT A PHILOSOPHY, A PROCESS P6/341-I ORIGINS:
JUST IN TIME (JIT) Original written by professor José Luis Fernández at IE Business School. Original version, 22 January 2004. Last revised, 18 July 2008. Published by IE Publishing Department. María de
Development of Lean Manufacturing Course Material
Development of Lean Manufacturing Course Material An Interactive Qualifying Project Submitted to the Faculty of WORCESTER POLYTECHNIC INSTITUTE In partial fulfillment of the requirements for the Degree
EMERGENCY ACTION AND FIRE PREVENTION PLAN
Sample Written Safety Program For EMERGENCY ACTION AND FIRE PREVENTION PLAN Page 1 EMERGENCY ACTION AND FIRE PREVENTION PLAN (YOUR COMPANY NAME) EMPLOYEE EMERGENCY AND FIRE PREVENTION PLANS Emergencies
Housekeeping and Material Storage
29CFR 1926.20(b)-Accident Reduction, 29CFR 1926.21- Safety Training & Education 29CFR 1926.20(a)-Unsafe Working Conditions Housekeeping and Material Storage Preparation 1. Read Applicable Background information
LEAN MANUFACTURING LEAN MANUFACTURING, 5S AND SIX SIGMA
Page 1 of 8 PREPARED BY THE FOLK GROUP. THIS MAY BE REPRINTED WITH ATTRIBUTION. FEBRUARY, 2009. We re big fans of lean manufacturing practices, 5S and Six Sigma based on the results we ve seen in metal
Session 4-Lean Tools- 5S, Kanban, VSM, SMED, TPM
Session 4-Lean Tools- 5S, Kanban, VSM, SMED, TPM Upholstery Frame Workshop NCSU Wood Products Extension Hickory, North Carolina December 10th, 2009 Harry Watt Business Improvement Specialist [email protected]
LEAN SIX SIGMA PRESENTATION TO CAMA
Murray Jamer Saskatoon May 29, 2012 LEAN SIX SIGMA PRESENTATION TO CAMA Overview Traditional ways to balance the municipal books Some of our proactive tools Lean Six Sigma Fredericton s Lean Journey 5S
Table of Contents MODULE 1: QUALITY MANAGEMENT SYSTEM... 3. Introduction:... 3 What is a QMS (Quality Management System)?... 3
Table of Contents MODULE 1: QUALITY MANAGEMENT SYSTEM... 3 Introduction:... 3 What is a QMS (Quality Management System)?... 3 The eight quality management principles:... 4 Principle 1: Customer Focus...
7 Principles of Lean Supplies
7 Principles of Lean Supplies Simple changes make a big impact Our thanks to Kimberly-Clark for allowing us to reprint the following article. Lean supplies: a hidden opportunity Lean has transformed manufacturing
VISUAL management techniques for optimum INVENTORY form, fit and function
You won t GET LEAN... until you GET VISUAL! VISUAL management techniques for optimum INVENTORY form, fit and function Raw materials, work-in-process, finished goods, location and product flow Kanban Min/max
Getting Started with Lean Process Management
Getting Started with Lean Process Management Hi-Tec Exchange Conference San Francisco July 25, 2011 Missions To team with Organizational Leaders, Managers, & Employees to focus on customers & improve competitiveness,
Using the Lean Model for Performance Improvement
Using the Lean Model for Performance Improvement Presented by Content Expert: Cindy Mand Director, Lean Enterprise BloodCenter of Wisconsin, Milwaukee, WI Learning Objectives 1. History of Lean and it
Lean Implementation in a Low Volume Manufacturing Environment: a Case Study
Proceedings of the 2010 Industrial Engineering Research Conference A. Johnson and J. Miller, eds. Lean Implementation in a Low Volume Manufacturing Environment: a Case Study Lucas Simmons, Robbie Holt,
NATEF On-Site Evaluation Photo Album
Table of Contents NATEF On-Site Evaluation Photo Album Welcome to the NATEF On-Site Photo Album. The photos in this album represent both good and bad examples of specific instances found during actual
Louisiana State University Information Technology Services (ITS) Frey Computing Services Center Data Center Policy
Louisiana State University Information Technology Services (ITS) Frey Computing Services Center Data Center Policy Access: If you have been granted a Frey Access Card with currently approved access to
ISE 362 - Lean Production Week 1 IDEAL Systems HOW?
ISE 362 - Lean Production Week 1 IDEAL Systems HOW? İzmir University of Economics Halil POSACI 2013, İzmir www.halilposaci.com Graduated from METU -1978 MBA Planning & Org. DEU IT Manager Tarişbank -2000
C3306 LOCKOUT/TAGOUT FOR AUTHORIZED EMPLOYEES. Leader s Guide. 2005, CLMI Training
C3306 LOCKOUT/TAGOUT FOR AUTHORIZED EMPLOYEES Leader s Guide 2005, CLMI Training LOCKOUT/TAGOUT FOR AUTHORIZED EMPLOYEES This easy-to-use Leader s Guide is provided to assist in conducting a successful
LEAN MANAGEMENT PRINCIPLES EMERGED AS A RESULT OF
Lesson No. CRCST 134 (Technical Continuing Education - TCE) Sponsored by: by Yaffa Raz, RN, BA Central Service Sterilization Manager Lady Davis Carmel Medical Center Haifa, Israel LEAN MANAGEMENT PRACTICES
Focus Conference 2014 Orlando Florida. Angela Lorenzo, MS, RRT, RPFT VA NY Harbor Healthcare System Long Island University
Focus Conference 2014 Orlando Florida Angela Lorenzo, MS, RRT, RPFT VA NY Harbor Healthcare System Long Island University Desk Set (1957) Desk Set (1957) The computer generated pink slips for every employee
Website : www.sgsina.ir Mobile: 0918 811 2283
Website : wwwsgsinair Mobile: 0918 811 2283 Email: info@sgsinair es_babaee@yahoocom 13920820 System Gostar Sina co(esbabaei) : Improvement 5S Measurement 5S 5S 5S 5S Identify waste 13920820 System Gostar
Improving supply chain management information systems in public administration using a new theory
www.ijcsi.org 102 Improving supply chain management information systems in public administration using a new theory Hind LAHMIDANI Omar EL BEQQALI Department of Science and Technologies of Information
Redesign of procurement processes through the utilization of lean manufacturing techniques and barcode technology
ASQ Vancouver 25th Anniversary Quality and Business Excellence Celebration Redesign of procurement processes through the utilization of lean manufacturing techniques and barcode technology Luis Lopez,
LEAN 101 CRASH COURSE. Presented by Jacob McKenna and Seaver Woolfok
LEAN 101 CRASH COURSE Presented by Jacob McKenna and Seaver Woolfok Introductions Name Company Position Expectations Favorite Movie Instructors Background: Jacob McKenna has been involved with Lean manufacturing
About Regional Nephrology Centre Dializa Visualizing the Future of Patient Care at RNC
Making the Case for Quality March 2015 Polish Dialysis Center Employees Use Visual Management to Increase Safety, Improve Organization of Medical Facility by Katarzyna Złotowska and Adam Wise Clear order
EACH CLASS of fire A, B, C, or D has a different source. Some
Classes of Fires and Types of Extinguishers EACH CLASS of fire A, B, C, or D has a different source. Some principles apply to putting out all fires. However, certain procedures and products are used only
AN INDUSTRIAL APPLICATION OF THE SMED METHODOLOGY AND OTHER LEAN PRODUCTION TOOLS
Integrity, Reliability and Failure of Mechanical Systems Paper Ref: 3927 AN INDUSTRIAL APPLICATION OF THE SMED METHODOLOGY AND OTHER LEAN PRODUCTION TOOLS Eric Costa 1(*), Rui Sousa 1, Sara Bragança 1,
CHALLENGES OF LEAN MANAGEMENT
CHALLENGES OF LEAN MANAGEMENT Investigating the challenges and developing a recommendation for implementing Lean management techniques Bachelor s thesis Supply Chain Management Forssa spring 2013 Fiona
QUALITY TOOLBOX. Understanding Processes with Hierarchical Process Mapping. Robert B. Pojasek. Why Process Mapping?
QUALITY TOOLBOX Understanding Processes with Hierarchical Process Mapping In my work, I spend a lot of time talking to people about hierarchical process mapping. It strikes me as funny that whenever I
Home staging: Spend less time on the market
Home staging: Spend less time on the market Before you list your house for sale, consider a surefire way to sell your house: professional home staging. Home staging benefits include less time on the market
FOREIGN MATTER MANAGEMENT 36 QUESTION ASSESSMENT
Name: Employee I.D. or Personal I.D. Number: Company Name: Department: Head of Department: I understand that this 36 question test proves that I know what I am doing and therefore gives me no reason whatsoever
BEGINNING THE LEAN IMPROVEMENT JOURNEY IN THE CLINICAL LABORATORY
BEGINNING THE LEAN IMPROVEMENT JOURNEY IN THE CLINICAL LABORATORY Author: Jason A. Coons, Program Manager, TechSolve Abstract Lean is an extremely powerful tool in identifying and eliminating waste. The
Classroom Management Plan Nicole Short EDUC 360
Classroom Management Plan Nicole Short EDUC 360 The purpose of this classroom management plan is to address my philosophy and beliefs about discipline, state classroom procedures, and the implementation
section 5 machine guarding and lockout
section machine guarding and lockout This section covers ways to physically protect people working in and around machinery. It includes information on: machinery guards lockout systems emergency stop confined
WEEKLY SAFETY MEETING All Euramax Subsidiaries LOCKOUT / TAGOUT. Safety Meeting Contents. Meeting Notice. Leaders Guide.
Safety Meeting Contents Meeting Notice Leaders Guide Employee Handout Employee Quiz Meeting Sign-In Sheet Employee Puzzle PRIOR TO THE WEEKLY MEETING: - Post the meeting notice by the timeclock - Read
Department: Manager: Safety Coordinator: Date:
SAFETY and staff, regardless of hiring status or job position 1 1. Can staff name their department safety coordinator? 2. Is the Department Safety Binder current? 3. Do slip/trip hazards exist? 4. How
PPG SUPPLIER DEVELOPMENT ASSESSMENT
Supplier: Address: Products: Assessment Date: Assessment Team: Certification: Supplier Contacts Position E-mail Phone General Comments: Assessment Results Summary Sections Non-conformity Action Point Quality
Safety Meeting Topic: Chemical Spills and Emergency Action Plans for General Industry
Company Name: Safety Meeting ID: 16 Date: Grainger Safety Services Inc. 2012 Safety Meeting Topic: Chemical Spills and Emergency Action Plans for General Industry UPDATED: This safety meeting has been
Performance Improvement through 5S in Small Scale Industry: A case study
Performance Improvement through 5S in Small Scale Industry: A case study P. M. Rojasra 1, M. N. Qureshi 2 1 M.E.Mech. (Student), Mechanical Engineering Department, Faculty of Technology and Engineering,
WSH Guide Workplace Housekeeping
WSH Guide Workplace Housekeeping Draft for Public Comment Comment Period starts 18 Aug 2015 and ends 15 Sep 2015 (4 weeks) This is a draft document which is subject to change. Members of the public are
Housekeeping Audit Check Sheet for Warehouse (Refer SOP QMS-105)
Area Audited Audit Date Week Wk1 Wk2 Wk3 Wk4 Office Documentation stored appropriately Contact lists near phones are clearly displayed, current and easily accessible. All personal items are stored in lockers.
How To Protect Your Shop From Tripping Hazards
For Employers and Supervisors The hazards of poor housekeeping The purpose of this Crew Talk handout is to provide employers and supervisors with information to help protect their workers from injuries
Georgia Tech Aerospace Server French building Server Room. Server Room Policy Handbook: Scope, Processes and Procedure
Georgia Tech Aerospace Server French building Server Room Server Room Policy Handbook: Scope, Processes and Procedure Version History Version/Status Release Date Comments 1.1/Draft 1.2 1.3 1.4 1.5 1.6
Watch your step: In the construction industry. Health and Safety Executive. Watch your step. In the construction industry
Health and Safety Executive Watch your step In the construction industry Introduction Several thousand construction workers are injured each year following a trip or slip while they re at work on a building
VERIFY HARD COPY AGAINST WEB SITE IMMEDIATELY PRIOR TO USE
Nuclear Safe Work Practice 6.7 Safety Signs/Tapes/Ropes/Chains and Tags 1.0 PURPOSE/SCOPE To provide consistent standards for using safety signs, tapes, ropes and chains (barriers) to communicate existing
Job Description. Custodian
Job Description 5/30/2005 Page 1 PURPOSE OF THE POSITION (The main reason for the position, in what context and what is the overall end result) The Custodial is responsible for performing custodial duties,
Introduction to PC Repair By
Excerpt from Introduction to PC Repair By Greg Deemie The following is a sample excerpt from a study unit converted into the Adobe Acrobat format. A sample online exam is available for this excerpt. Personal
APPROVED BY: Ed Seman. Red Tag is one of the implementation plans for Sort (seiri), part of the kaizen strategy of workplace improvement.
1 DEFINITIONS Red Tag is one of the implementation plans for Sort (seiri), part of the kaizen strategy of workplace improvement. S a method of creating a clean and orderly workplace that exposes waste
STANDARDIZED WORK 2ND SESSION. Art of Lean, Inc. 1 www.artoflean.com
STANDARDIZED WORK 2ND SESSION 1 STANDARDIZED WORK AND WORK STANDARDS - SESSION 2 AIM (1) Understand the Importance of Standardization in TPS (2) Introduce Various Standards Sheets and Basics of Creation
Module 10: Inventory Managing Stocks at the HIV Rapid Testing Site
Module 10: Inventory Managing Stocks at the HIV Rapid Testing Site Purpose To equip the participants with necessary knowledge so they can properly manage the stocks at the rapid testing sites. Pre-requisite
SAINT-GOBAIN ABRASIVES SHANGHAI LEAN MANUFACTURING FEASIBILITY STUDY
SAINT-GOBAIN ABRASIVES SHANGHAI LEAN MANUFACTURING FEASIBILITY STUDY A Major Qualifying Project Report Submitted to the Faculty of the WORCESTER POLYTECHNIC INSTITUTE in partial fulfillment of the requirements
LEAN MANUFACTURING: THE NEW NORMAL Leaning for Contract Packaging and Contract Manufacturing
LEAN MANUFACTURING: THE NEW NORMAL Leaning for Contract Packaging and Contract Manufacturing K. DONALD THAM, Ph.D., P.Eng. Ryerson University, Toronto, Canada Professor of IE & Internship Coordinator Nulogy
Safety in Offices and other General Areas
Safety in Offices and other General Areas 1. INTRODUCTION This document covers health and safety in offices and other 'general areas' including corridors, stairs, entrances, small kitchens and rest areas.
FREEPHONE: 0800 059 9112 EMAIL: [email protected]. Asbestos Awareness. Toolbox Talk
FREEPHONE: 0800 059 9112 EMAIL: [email protected] Asbestos Awareness Toolbox Talk ASBESTOS AWARENESS Why is it a Problem Asbestos was extensively used as a building material in the UK from the
Autonomous Maintenance
Autonomous Maintenance TPM & Autonomous Maintenance I run it, you fix it! I fix it, you run it! What is Maintenance? Why is Possible Utilization Rate Necessary? One way to look at Lean (JIT) production
FOREWORD OF THE SERIES
FOREWORD OF THE SERIES Many people believe that occupational health problems only occur in factories and offices are comfortable and generally healthy. This is not so. There are various health risks which,
Lean Manufacturing: Part 1. Charles Theisen, CPIM, CIRM. Lean Manufacturing Part 1
Lean Manufacturing Part 1 2013 ProcessPro, the ProcessPro logos, and the ProcessPro product and service names mentioned herein are registered trademarks or trademarks of Blaschko Computers, Inc. d.b.a.
Five. Free. Trai. The following. used with. their own activities. happy to
Five Free Customer Service Trai ning Games The following are five free customer service training games that we have used with clients during our customer service courses for more than a decade. We frequently
October Safety Subject
October Safety Subject Electrical Hazards All electrical equipment should be kept in good repair. Replace defective equipment or have it repaired by a qualified person. Watch for wiring on appliances that
5S Floor Marking Color Standard
5S Floor Marking Color Standard Government Regulations & Industry Standards While several OSHA regulations dictate that permanent aisles and passageways must be clearly marked, there are no current government-mandated
BBC Learning English Talk about English Business Language To Go Part 2 - Induction
BBC Learning English Business Language To Go Part 2 - Induction This programme was first broadcast in 2001. This is not a word for word transcript of the programme Forget about struggling with dictionaries
What is a Tracking Chart?
The factual information set forth on the Tracking Charts was submitted to the FLA by each Independent External Monitor and Participating Company and reviewed by FLA staff. It is being made available to
Injury & Illness Prevention Program (IIPP)
Injury & Illness Prevention Program (IIPP) Adapted from Cal/OSHA Workplace Injury & Illness Prevention Model Program for Non-high Hazard Employers CS-1B, 1995 Revisions: 2/92, 4/93, 5/95, 3/00, 3/04, 3/06,
BACKGROUND, OBJECTIVES & METHODOLOGY
Page 2 of 10 Background BACKGROUND, OBJECTIVES & METHODOLOGY In accordance with the Office of the Controller s City Services Auditor Division (CSA) fiscal year 2011-12 work plan, CSA audited the warehouse
Better Recycling - Less Waste Your Sustainable Campus Initiative
Better Recycling - Less Waste Your Sustainable Campus Initiative Frequently Asked Questions (FAQs): Why change the way we manage waste? Why have individual desk bins been removed? What if I don t have
SC21 Manufacturing Excellence. Process Overview
SC21 Manufacturing Excellence Process Overview Prepared by:- The SC21 Performance, Development and Quality (PDQ) Special Interest Group (SIG) Acknowledgement The scoring methodology used in the Management
Kidd Mine Barricade Standards
Kidd Mine Barricade Standards Wednesday, February 13, 2013 Why Upgrade Our Barricade Standard? Eliminate any confusion with fences, signs and their purpose in our operation by applying an easily recognizable
SCIENCE NOTEBOOKS: We would label their dividers first. I would put the labels on the board or overhead. You could use a WhiteBoard, too.
SCIENCE NOTEBOOKS: The principles behind notebooks are important: To be well-organized or to strive to be To develop the mindset of a place for everything To be accountable for your papers (keeping every
Office Move Checklist
Office Move Checklist Plan your entire office move from start to finish with this definitive Moving Office Checklist. It guides you through each step of the planning process and is loaded with top tips
CONSTRUCTION SITE HEALTH AND SAFETY SELF AUDIT
www.veritas-consulting.co.uk CONSTRUCTION SITE HEALTH AND SAFETY SELF AUDIT This checklist identifies some of the hazards most commonly found on construction sites. The questions it asks are intended to
Tool Box Talk. Forklift Operations
Tool Box Talk Forklift Operations Treat them with respect 40k for H40, 62k for H70 Mercedes CL, Jaguar Daimler or XKR, Porsche Carrera 4S 40k, same price as H40 treat them the same! 62k, same price as
