SLIP DEFENCE. 393 Stealth Slipstream Extreme-grip foam nitrile coating, triple-thread nylon seamless knit shell, snug-fitting knit wrist

Transcription

1

2 HARD-WEARING NITRILE COATING, LIGHTLY TEXTURED FINISH, NYLON SEAMLESS KNIT SHELL, EXTENDED SNUG-FITTING WRIST ENDUIT DE NITRILE ROBUSTE ET RÉSISTANT, FINI LÉGÈREMENT TEXTURÉ, COQUILLE EN TRICOT DE NYLON, SANS COUTURE, POIGNET ALLONGÉ AJUSTÉ SLIP DEFENCE/PROTECTION CONTRE LE GLISSEMENT MICROFOAM NITRILE COATING WITH NITRILE DOTTED PALM, 15GG FINE NYLON SHELL, ERGONOMICALLY FORMED, SNUG-FITTING SEAMLESS KNIT WRIST MICROFIBRE NITRILE COATING WITH NITRILE DOTTED PALM, 15GG FINE NYLON SHELL, ERGONOMICALLY FORMED, SNUG-FITTING KNIT WRIST SLIP DEFENCE/PROTECTION CONTRE LE GLISSEMENT TWO LAYER SEAMLESS KNIT SHELL WITH HEAVY NAPPED THERMAL INTERIOR, NFN (NEW FOAM NITRILE) 3/4 DIPPED COATING, BE SAFE, BE SEEN WITH HI-VIS YELLOW, KNIT WRIST COQUILLE COMPOSÉE DE DEUX COUCHES DE TRICOT SANS COUTURE ET D'UN INTÉRIEUR MATELASSÉ ÉPAIS POUR CONSERVER LA CHALEUR, EXCELLENT POUR LES APPLICATIONS DANS LES NAPPES D'HYDROCARBURE, REVÊTEMENT NFN, JAUNE HAUTE VISIBILITÉ SOYEZ EN SÉCURITÉ, SOYEZ VISIBLE!, POIGNET EN TRICOT AJUSTÉ SLIP DEFENCE/DÉFENSE ANTIDÉRAPANTE, ACRYLIC/ACRYLIQUE EXTREME-GRIP FOAM NITRILE COATING, TRIPLE-THREAD NYLON SEAMLESS KNIT SHELL, SNUG-FITTING WRIST REVÊTEMENT À PRISE EXTRÊME EN MOUSSE DE NITRILE, COQUILLE EN TRICOT DE NYLON À TROIS FILS SANS COUTURE, POIGNET AJUSTÉ SLIP DEFENCE/PROTECTION CONTRE LE GLISSEMENT 15GG FINE NYLON LINER WITH 7GG ACRYLIC LINING, FULL DIP/KNUCKLE DIP PVC, NITRILE, SNUG-FITTING KNIT WRIST NYLON MINCE DE CALIBRE 15 AVEC DOUBLURE EN ACRYLIQUE DE CALIBRE 7, ENTIÈREMENT ENDUIT DE NITRILE PVC, POIGNET AJUSTÉ SLIP DEFENCE/DÉFENSE ANTIDÉRAPANTE ACRYLIC/ACRYLIQUE, NYLON, PVC, NITRILE SLIP DEFENCE #390 ORIGINAL S/P 390 Stealth Original Hard-wearing nitrile coating, lightly textured finish, nylon seamless knit shell, extended snug-fitting knit wrist, CFIA approved Size S XL EN #393 SLIPSTREAM L/G 393 Stealth Slipstream Extreme-grip foam nitrile coating, triple-thread nylon seamless knit shell, snug-fitting knit wrist EN #395 BLACKBIRD S/P 395 Stealth Blackbird Microfoam nitrile coating with nitrile dotted palm, 15gg fine nylon shell, ergonomically formed, snug-fitting knit wrist EN #9393 BLACK OPS L/G 9393 Stealth Black Ops T 15gg fine nylong liner with 7gg acrylic lining, Full dip/knuckle dip PVC/Nitrile coating, snug-fitting knit wrist Size M XXL EN #9392 COLD WAR S/P 9392 Stealth Cold War T Two layer seamless knit shell with heavy napped thermal interior, NFN (New Foam Nitrile) 3/4 dipped coating, treated with Actifresh, Be safe, be seen with hi-vis safety yellow, snug-fitting knit wrist Size M XXL EN T Lined for Winter

3 SLIP DEFENCE 391W Stealth White Lite 12 pairs, lightweight polyurethane coating, fine-gauge nylon seamless knit shell, snug-fitting wrist, CFIA approved Size XS XL EN Stealth Black Lite 12 pairs, lightweight polyurethane coating, fine-gauge polyester seamless knit shell, snug-fitting wrist, CFIA approved Size S XL EN x6 Stealth Light Artillery 6 pairs, nitrile coating, Be safe, be seen with hi-vis safety yellow polyester seamless knit shell, snug-fitting wrist Size M XL EN Glove Box H: 54" x W: 19.5" x D: 36" Holds up to 120 pairs 389 Stealth Lite Speed 12 pairs, hard-wearing nitrile coating, lightly textured finish, nylon seamless knit shell, extended snug-fitting wrist Size XS XL EN

4 KEVLAR SEAMLESS KNIT SHELL, ULTRA STRONG NITRILE COATING, SNUG-FITTING WRIST COQUILLE EN TRICOT DE KEVLAR MD SANS COUTURE, PAUME À REVÊTEMENT EN NITRILE ULTRA ROBUSTE, POIGNET AJUSTÉ COUPURE DÉCHIRURE PERFORATION FAIR/MOYEN 3232 MADE IN BANGLADESH/ FABRIQUÉ AU BANGLADESH KEVLAR, LYCRA, NITRILE ARMAID FIBRE SEAMLESS KNIT SHELL, SURE-GRIP FOAM NITRILE COATING WITH TEXTURED FINISH, RUBBER ON BACK, SNUG-FITTING KNIT WRIST COQUILLE DE TRICOT DE FIBRES D'ARAMID SANS COUTURE, PAUME À REVÊTEMENT EN MOUSSE DE NITRILE ET À FINI TEXTURÉ SURE-GRIP, CAOUTCHOUC AU DOS ET AUX DOIGTS, POIGNET EN TRICOT AJUSTÉ COUPURE DÉCHIRURE PERFORATION FAIR/MOYEN 4342, SPANDEX, ARAMID BLENDED FIBRE SEAMLESS KNIT SHELL WITH NAPPED THERMAL INTERIOR, 3/4 DIPPED, NATURAL RUBBER LATEX COATING, SNUG-FITTING KNIT WRIST COQUILLE DE FIBRE ARAMIDE, REVÊTEMENT DE POLYURÉTHANE À BASE D EAU JAUNE HAUTE VISIBILITÉ, COQUILLE DE TRICOT SANS COUTURE, DOS OUVERT, FORME ERGONOMIQUE, POIGNET DE TRICOT SANS COUTURE, ALLONGÉ, AJUSTÉ COUPURE DÉCHIRURE PERFORATION FAIR/MOYEN 4544 ARMAID FIBRE SEAMLESS KNIT SHELL, SURE-GRIP FOAM NITRILE COATING WITH TEXTURED FINISH, SNUG-FITTING KNIT WRIST COQUILLE DE TRICOT DE FIBRES D'ARAMID SANS COUTURE, PAUME À REVÊTEMENT EN MOUSSE DE NITRILE ET À FINI TEXTURÉ SURE-GRIP, POIGNET EN TRICOT AJUSTÉ COUPURE DÉCHIRURE PERFORATION FAIR/MOYEN 4342, SPANDEX, ARAMID ARAMID FIBRE SEAMLESS KNIT SHELL, BE SAFE, BE SEEN WITH HI-VIS SAFETY YELLOW, SANDY NITRILE COATING, ERGONOMICALLY FORMED, EXTENDED SNUG-FITTING KNIT WRIST COQUILLE DE FIBRE ARAMIDE, REVÊTEMENT DE POLYURÉTHANE À BASE D EAU JAUNE HAUTE VISIBILITÉ, COQUILLE DE TRICOT SANS COUTURE, DOS OUVERT, FORME ERGONOMIQUE, POIGNET DE TRICOT SANS COUTURE, ALLONGÉ, AJUSTÉ COUPURE DÉCHIRURE PERFORATION FAIR/MOYEN 4543 P-ARAMID/MODACRYLIC/STEEL/ SPANDEX SHELL, NITRILE FOAM COATING, SNUG-FITTING KNIT WRIST COQUILLE 13GG P-ARAMID/ACIER/SPANDEX, REVÊTEMENT DE NITRILE MOULÉ, POIGNET EN TRICOT AJUSTÉ SLIP DEFENCE #352 DESERT STORM M/M X 352 Stealth Desert Storm Kevlar seamless knit shell, ultra strong foam nitrile coating, snug-fitting wrist, CFIA approved EN #353 DYNAMO! S/P Stealth Dynamo! HPPE fibre seamless knit shell, sure-grip foam nitrile coating with textured finish, snug-fitting knit wrist, CFIA approved EN B Cut Level 2 A2-761Gr. #353TPR HELLCAT L/G 2 353TPR Stealth Hellcat HPPE fibre seamless knit shell, sure-grip foam nitrile coating with textured finish, rubber on back, knuckle bar and fingers, snug-fitting knit wrist, CFIA approved EN B Cut Level 2 A2-761Gr. #357 DOG FIGHT XXL/TTG Stealth Dog Fight HPPE fibre seamless knit shell, Be safe, be seen with hi-vis safety yellow, sandy nitrile coating, ergonomically formed, extended snug-fitting knit wrist EN D Cut Level 4 A4-1500Gr. #9390 MACH 5 S/P Stealth Stinger Fine Gauge Hppe/nylon/glass/lycra seamless knit shell, polyurethane coating, snug-fitting knit wrist Size M XXL EN Cut Level 2 (F ) A2-582Gr. 911 Stealth Danger Zone 13gg P-aramid/modacrylic/steel/spandex shell, nitrile foam coating, snug-fitting knit wrist Size M XXL EN E Cut Level 4 (F ) A5-2200Gr. T Lined for Winter *These gloves have been tested in accordance to the new 2016 /ISEA cut resistant standard

5 SLIP DEFENCE SLIP DEFENCE CUT DEFENCE GLOVES DRY OILY WET CUT TEAR PUNCTURE TPR W 396X6 LEGEND FAIR GOOD EXCELLENT NOT RECOMMENDED Watson Gloves Warns Any User Of This Product That It May Not Be Suitable For A Specific Use. This Product Has Been Designed And Tested Under Controlled Conditions For Certain Purposes. However, Because Watson Gloves Has No Control Over The Specific Conditions Of The End User s Actual Use Of Its Products They May Not Be Suitable For A Specific Use. Watson Gloves Disclaims Any Liability For The Selection By An End User For A Specific Use. See Our Website Watsongloves.Com For Further Information.

6 SLIP DEFENCE ASTM F1790 and ISO Test Method In the ASTM F1790 and ISO test methods, the sample is cut by a straight-edge blade, under load, that moves along a straight path. The sample is cut five times each at three different loads and the data is used to determine the required load to cut through the sample at a reference distance of 20 mm (0.8 in.). This is referred to as the Rating Force or Cutting Force (Refer to Diagram below). The higher the Rating Force, the more cut-resistant the material. Neoprene rubber is used as the standard to evaluate blade sharpness. Test Method In the test method, a circular blade, under a fixed load, moves back and forth across the sample until cut-through is achieved. A cotton canvas fabric is used as the reference material. The reference material and test sample are cut alternately until at least five results are obtained. The cut resistance is a ratio of the number of cycles needed to cut through the test sample vs. the reference material. This is referred to as the cut index (Refer to Diagram below). Load (g) Blade Blade Travel Blade Blade Travel Test Material Sample Holder Test Material Sample Holder 51 (2.0) 46 (1.8) 41 (1.6) Load vs. Distance Reference material Ci = 2 cycles Reference material S = 5 cycles Reference material average = Ci + Cf = 2.5 Cut Index = (Cavg + S)/Cavg = ( )/2.5 = 1.5 Average of 5 results per sample Reference material Cf = 3 cycles Distance to Cut-through, mm (in.) 36 (1.4) 30 (1.2) 25 (1.0) 20 (0.8) 15 (0.6) Reference Distance Rating Force 10 (0.4) 5 (0.2) ,000 1,100 1,200 1,300 1,400 Load (g) Abrasion Resistance Rating Cut Resistance Rating Tear Resistance Rating Puncture Resistance Rating /ISEA 105 Performance Levels for Cut Resistance Performance Level Weight (g) needed to cut through material with 25mm (1.0in) blade travel ,000 1, ,500 3,499 Performance Levels for Cut Resistance Performance Level Blade Cut Resistance (Cut Index) ,500

7 SLIP DEFENCE

8 Our Story Tag Concepts Watson in a Nutshell With close to a century of experience, Watson Gloves is Canada s single source for hand protection at work, at home, at play. Our team of glove specialists gets tremendous satisfaction from working with our customers to find the perfect hand protection for just about any task imaginable. Whether we source our gloves from the world s finest manufacturers, or hand-craft them in our local factory, every pair of gloves we sell has been selected for top-of-the-line materials, design and craftsmanship. Try on a pair of Watson gloves. Your hands will thank you! 2 Man Show to International Operation In April 1918, John Watson and Wayne Stanley started a small business selling hand-crafted gloves to Vancouver s dock workers. Today, almost 100 years later, Watson Gloves has grown across Canada. We are among the country s leaders of distributing hand protection; offering the widest range of quality gloves for work, home and play. How did we get here? We have stayed true to our founders belief that quality materials and above-and-beyond customer service go hand-in-glove. We still make gloves. In fact, our artisans with an average 20 years experience put the same level of dedication and craftsmanship into every pair of gloves we make, as did our founders. Perhaps more importantly, we have expanded our horizons to keep up with our customers changing needs. Our talented buyers travel the world over in search of the most innovative materials and designs so that we can offer the best gloves for any task: at work, at home, at play. From bustling cities to remote corners of our country and countries across the Atlantic, our team of sales reps and efficient distribution system make it easy to protect the hands of our customers. At Watson Gloves, we do one thing, and we do it extremely well: we are the glove experts. Mr. Watson and Mr. Stanley would be proud to know that, even as we continue to grow, we continue to earn our reputation as Canada s single source for hand protection. Our Commitment At Watson Gloves, quality materials and above-and-beyond customer service go hand-in-glove. You can count on Watson for: Quality Every pair of gloves we sell has been hand-selected for top-of-the-line materials, design, and craftsmanship. Service with a Smile Our experienced team of specialists is committed to our customers complete satisfaction with each and every pair of Watson gloves purchased. Innovation We commit to staying one step ahead of our customers; anticipating their needs and bringing the most advanced gloves for just about any job imaginable. Watson Gloves 1920 s Contact Us Head Office - Burnaby T F sales@ Mississauga T F toronto@ Calgary T F calgary@ 06/20/2016