Catálogo de rodillos Multilith
|
|
|
- Mae Scott
- 9 years ago
- Views:
Transcription
1 atálogo de rodillos Multilith Instrucciones 1. Identifique la figura del modelo de su equipo. 2. Identifique la letra con la que se designa en la figura al rodillo que busca. 3. Utilice la letra de la figura para identificar el número de parte ( at. No.). 4. Ingrese a y complete el formulario de cotización incluyendo el número de parte y descripción. 5. Solicite asistencia a [email protected] o al +52(55) racias por su compra EEUS RPIUS ORUS S.. E.V. Salónica 259 ol. Sector Naval. México el: +52 (55)
2 MULILI MOELS 1250, (296, 1200, 1260, 1275 & 2550) maximum image width of 10 inches MULILI & 1250-L (Old Style) (2552-, 2560-, & 1274-) maximum image width of 10 3 /8 to 10 3 /4 inches ater bottle holder is in fountain tray, not on side of press with hose connection. YLINER Soft Rubber Metal ard Rubber at. No. Key escription MULILI MOELS 1250 (296, 1200, 1260, 1275, & 2550) Maximum Image idth of 10 Inches ia INK ORM S 2 1 / / INK ISRIUOR (oversize) 1 1 / / INK ISRIUOR (standard size) 15/ / INK ISRIUOR (small) S 7/ / INK ISRIUOR (mammoth size 1 5 / / 16 for ual-lo ) INK ISRIUOR (gear not included) / / / * INK UOR (standard size) S 1 1 / / INK OUNIN / / / UL-LO INK ROLL SE OP INK OSILLOR / / / ERE MIN OSILLOR S 2 1 / / / JUMO INK OSILLOR / / JUMO INK OSILLOELL / 2 S (converts standard top oscillator to jumbo ink roll) INK RIER OSILLOR 1 5 / / / 8 MOLLEON EYSEM ROLLERS ER ORM S 1 15 / / / M ER ORM (3M sleeve 2 1 / / / 32 #20511 not included) 12050* S ER UOR S 15/ / / ER OSILLOR (aluminum) / / / K R ER OUNIN ROLL (knurled) / / S R ER OUNIN ROLL (smooth) 1 3 / / 8 11 See page 53 for paper feeder and blanket cleaner rolls. See page 72 for ownsend -51 color head rolls. *earings are NO included. ear NO included. 50
3 at. No. Key escription REK EYSEM ROLLERS ia ER ORM (for new style shaft) 2 1 / / / * S ER UOR 1 1 / / / S R ER OUNIN (smooth) 1 3 / / R ER OSILLOR (hard rubber) 1 1 / / / 8 MULILI & 1250-L (Old Style) (2550-, 2560-, & 2650-) Maximum Image idth of 10 3 /8 to 10 3 /4 Inches ater bottle holder is in fountain tray, not on side of press with hose connection INK ORM S 2 1 / / / INK ISRIUOR (oversize) 1 1 / / / INK ISRIUOR (standard size) 15/ / / INK ISRIUOR (small size) S 7/ / / INK ISRIUOR (mammoth size 1 5 / / / 16 for ual-lo set) INK ISRIUOR (gear not included) / / / * INK UOR (standard size) S 1 1 / / / INK OUNIN / / / INK RIER OSILLOR 1 5 / / / OP INK OSILLOR / / / ERE MIN OSILLOR S 2 1 / / / JUMO INK OSILLOR / / JUMO INK OSILLOELL / 2 S (converts standard top oscillator to jumbo ink roll) UL-LO INK ROLL SE MOLLEON EYSEM ROLLERS ER ORM S 1 15 / / M ER ORM (3M sleeve / / / 8 #20512 not included) 12150* S ER UOR S 15 / / / ER OSILLOR (aluminum) / / / K R ER OUNIN (knurled) / / 8 11 REK EYSEM ROLLERS ER ORM 2 1 / / / * S ER UOR 1 1 / / / R ER OSILLOR (hard rubber) 1 1 / / / S R ER OUNIN (smooth) 1 3 / / 8 11 smooth aluminum fountain roll will give better water control and will be easier to clean. If your smooth roll picks up ink, clean it with plate cleaner or straight etch. ipe it dry, apply plate gum, and wipe it dry again. Since the fountain solution dissolves the thin film of gum, the fountain roll is now ready to use. Never use any solvent to clean a 3M sleeve. If cleaning is necessary though it s better to use a new sleeve use only plain water or fountain solution. See page 53 for paper feeder and blanket cleaner rolls. See page 72 for ownsend -51 color head rolls. *earings are NO included. ear NO included. 51
4 MULILI 1250, 1250-L (New Style) (1275-, 1260-, 2650 & 2850-) & 1250-N maximum image width of 11 inches ater bottle is mounted on side of press with hose connecting to fountain tray. SNR INKIN SYSEM Soft Rubber Metal ard Rubber J YLINER at. No. Key escription ia. 122-K KI (five soft rubber ink rolls) INK ORM S 2 1 / / INK ISRIUOR (oversize) 1 1 / / INK ISRIUOR (standard size) 15/ / INK ISRIUOR (small size) S 7/ / INK ISRIUOR (mammoth size) 1 5 / / * RIER ROLL / / / 32 (1250-N ouble low system only) ISRIUOR / / / 32 (1250-N ouble low system only) 12226* INK ISRIUOR / / 16 (Q & system only) J RNSER ROLL (hard rubber) / / INK ISRIUOR (gear not included / / / INK UOR (standard size) / / / INK OUNIN / / / UL-LO INK ROLL SE J INK RIER OSILLOR 1 5 / / / OP INK OSILLOR / / / OP INK OSILLOELL / / 8 S (for -M mechanism only) ERE MIN OSILLOR S 2 1 / / / JUMO INK OSILLOR / / JUMO INK OSILLOELL / 2 S (converts standard top oscillator to jumbo ink roll) MOLLEON EYSEM ROLLERS ER ORM S 1 15 / / / M ER ORM (3M sleeve / / / 8 #20512 not included) ER ORM (hyton sleeve 1 15 / / / 8 not included) ER ORM (shrink on) / / S ER UOR / / S SPONE ER UOR / / S ER UOR / * S ER UOR / / / K R ER OUNIN (knurled) / / / ER OSILLOR (aluminum) / / / 8 he ink train soft rubber roller kit includes these rolls. See page 73 for ownsend -51 color head rolls. * earings are NO included. ear NO included. 52
5 at. No. Key escription REK EYSEM ROLLERS ia ER ORM 2 1 / / / S ER UOR 1 1 / / R ER OSILLOR (hard rubber) 1 1 / / / S R ER OUNIN (smooth) / / / 4 *earings are NO Included. See page 73 for ownsend -51 color head rolls. LNKE LENER ROLLS LOER PPER EE ROLLS PULLOU ROLLS OLES at. No. escription LNKE LENER S 1 5 / / / 32 X X (old style / oscillating) LNKE LENER / / / 16 X X X (new style / non-oscillating) LOER PPER EE / / / 8 X X X (one feeler finger) LOER PPER EE 1 5 / / / 8 X X X (three feeler fingers) LOER PPER EE / / / 8 X X X (four feeler fingers) LOER PPER EE / / / 8 X X X (for use only on second head of tandem machines / one feeler finger) PPER EEER / 2 7/ 8 7/ 8 X X X PULLOU LOER PPER EE 1 5 / / / 8 X (recessed gear / one feeler finger) LOER PPER EE 1 5 / / / 8 X (recessed gear / three feeler fingers) LOER PPER EE / / / 8 X (recessed gear / four feeler fingers) LOER PPER EE / / / 8 X (model 2975 / first head / recessed gear / one feeler finger) LOER PPER EE / / / 8 X (recessed gear / four feeler fingers) 12049* ER OUNIN X X OLE (old style / plastic / one-quart size / with cap & valve) 12249** ER OUNIN X X OLE (new style / & Models plastic / one-quart size 1850 & 1860 / with cap & valve) LOER PPER EE / / / 16 (for presses using latching fingers) LOER PPER EE / / / 16 (for presses using cam fingers) 1650XE, 1650M LOER PPER EE / / / 8 Models , 1870 & 1960 ia OS L *Old Style 1250 models have the water bottle #12049 attached to the fountain tray. **New Style uses bottle #12249, which is mounted on the side of the press with a rubber hose connecting it to the fountain tray. NS L N() Models 1330, 1360, 1360P, 1650, 1650XE, 1650M Models 1330, 1360, 1360P, 1650, 53
6 MULILI MOELS 1330, 1360, XE & 1450 at. No. SNR INKIN SYSEM Soft Rubber ard Rubber 1 K Not vailable from SYN- Multi. Std ust XE escription 1 OR 2 OR YLINER ia INK ORM (upper) / / / INK ORM (lower) / / / INK ORM (third - for / / / 4 only) INK ORM (for 1650 & / / XE only) INK ORM (gear driven) / / INK ISRIUOR / / INK UOR / / / INK OUNIN / / / INK OUNIN (1650 s) / / / OP INK OSILLOR / / / 16 (mounting post # not included) OP INK OSILLOR / / / 16 (mounting post # not included) MOLLEON EYSEM ROLLERS ER ORM / / / M ER ORM / / / 32 (3M sleeve #20514 not included) ER ORM (shrink on) / / S S S ER UOR / / / S S S SPONE ER UOR / / / 2 REK EYSEM ROLLERS ER ORM 2 1 / / / S S S ER UOR 1 5 / / / R ER OSILLOR 1 1 / / / 16 (hard rubber) See page 73 for ownsend -51 color head rolls. *earings are NO included. USOM & MULI-PERORMNE INKIN SYSEMS USE ON 1360/1650XE MULI-PERORMNE INKIN SYSEMS ONLY OR 2 OR 3 OR YLINER
7 MULILI 1360P & 1650M Soft Rubber Not vailable from SYN- 2 2 V 1 3 S R YLINER at. No. Key escription MULILI 1360P ia INK ORM (first) / / INK ORM (second) / / INK ORM (third) / / INK ORM (third / gear driven) / / INK ISRIUOR / / INK UOR / / / 4 MULILI 1650M INK ORM (first) / / INK ORM (second) / / INK ORM (third) / / INK ORM (third / gear driven) / / INK ISRIUOR / / INK UOR / / / 4 MULILI 1960M & 1860P Soft Rubber Not vailable from SYN- 2 2 V 1 3 S R YLINER at. No. Key escription MULILI 1960M & 1860P ia INK ORM (first) / / / INK ORM (second) / / / INK ORM (third) / / / INK ORM (third / gear driven) / / / INK ISRIUOR / / / * INK UOR S 1 1 / / 2 21 *earings are NO included. 55
8 MULILI MOELS 1860 & 1960XE SI INKIN SYSEM Soft Rubber ard Rubber 1 K 1 2 YLINER Not vailable rom SYN- at. No. asic ust. Multi. escription ia INK ORM (lower) S 2 1 / / INK ORM (upper) / / / INK ORM (third) / / / INK ORM (third / / / / 16 gear driven) INK ISRIUOR / / / INK UOR S 1 1 / / INK OUNIN / / / ERE MIN / / / 4 OSILLOR OP INK OSILLOR / / / 32 (mounting post # not included) OP INK OSILLOR / / / 32 (mounting post # not included) MOLLEON EYSEM ROLLERS ER ORM S 1 15 / / / M ER ORM / / / 16 (3M sleeve #20519 not included) ER ORM / / S S S ER UOR / / / S S S SPONE ER / / / 4 UOR See page 53 for listing of paper feeder rolls. USOM & MULI-PERORMNE INKIN SYSEMS OR MULI-PERORMNE INKIN SYSEMS ONLY 2 3 YLINER 56
9 MULILI 1850 & 1st E of 1870 & 1870N EQUIPPE I OULE LO INKIN SYSEM SNR INKIN SYSEM Soft Rubber Metal ard Rubber J 1 YLINER Not vailable from SYN- at. No. Std... escription ia INK ORM S 2 1 / / INK ISRIUOR S 1 3 / / / 16 (standard size) M INK ISRIUOR / / / * I INK RIER (top) / / / * K INK RIER / / / INK UOR S 1 1 / / INK OUNIN / / / OP INK OSILLOR / / / OP INK OSILLOR / / / 2 (mounting post # not included) OP INK OSILLOR / / / 2 (mounting post # not included ERE MIN OSILLOR / / / JUMO INK OSILLOR / / 16 MOLLEON EYSEM ROLLERS ER ORM S 1 15 / / / M ER ORM / / / 16 (3M sleeve #20519 not included) ER ORM (shrink-on) / / S S ER UOR / / / S S SPONE ER UOR / / / ER OSILLOR (alum.) / / / K R R ER OUNIN (knurled) / / 8 21 REK EYSEM ROLLERS ER ORM 2 1 / / / S S ER UOR 1 1 / / / R ER OSILLOR 1 9 / / / 16 (hard rubber) S R R ER OUNIN ROLL / / 8 21 (smooth) See page 53 for a listing of paper feeder rolls. See page 16 for restline water unit rolls. *earings are NO included. I OULE LO INKIN SYSEM M 1 M K I K 2 L R S YLINER 57
10 MULILI 1820, 1862, 1870 & 1962 SEON OLOR E Soft Rubber E ard Rubber 1 2 Not vailable from SYN- YLINER S R at. No. Key escription ia. MULILI MOEL 1820, 1862, 1870, & 1962 OLOR E 18210* 2 INK ORM (lower) S 2 1 / / * 1 INK ORM (upper) S 2 3 / / * INK ISRIUOR S 1 1 / / / * INK UOR S 1 1 / / INK OUNIN / / / 4 MOLLEON EYSEM ROLLERS 18240* ER ORM S 1 7 / / / * 3M ER ORM (3M sleeve / / / 8 #20519 not included) 18050* S ER UOR / / / 4 MULILI MOEL 1218 & OKO MOEL O R S 2 V 1 2 YLINER Soft Rubber Not vailable from SYN- at. No. Key escription MULILI MOEL 1218 & OKO MOEL INK ORM / / / INK ORM / / / INK ILER / / / * INK UOR / / / 8 EYSEM ROLLERS ia. 4754* S ER UO / / / L* S ER UOR (1218 only) S / / / * O ER MEERIN S / / / 16 58
11 SYM REVISION E ERIN OMP. NO. UNLESS OERISE SPEIIE POLMER X/X ± 1/64.X ±.030.XX ±.010.XXX ±.005 IO MNIOL PROUS O. 171 E. MRQUR R. / EELIN, ILLINOIS MINE MOEL URO- OLOR PR NME RESILIENE MEL RN Y SLE REVISION PR NUMER EMEN INIS E PPV.
12
Catálogo de rodillos A.B.Dick
atálogo de rodillos A.B.ick *A.B.ick es una marca registrada de A.B.ick ompany Instrucciones 1. Identifique la figura del modelo de su equipo. 2. Identifique la letra con la que se designa en la figura
FAG Hydraulic nuts. Technical Product Information
FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables
4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
Offset Printing Technology Questions and Answer
1. What is the meaning of offset? Offset Printing Technology Questions and Answer Unit I The ink printing over the paper surface gets off in the blanket and finally set on the paper. 2. Why offset process
Pad printing accessories
Pad printing accessories Accessories for inks & ink cups Screened films & plastic plate manufacturing Cleaning Miscellaneous Inhalt Summary Page Adhesive spray KIWO FIX 12 All-purpose gloves 9 All-purpose
Number Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
Char-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors
Char-Lynn Spool Valve Hydraulic Motors Repair Information W Series Geroler Motors with Parking Brake 004 Nut Key Ring, Retaining Bearing Ring, Retaining Ring, Retaining Washer (Thick), Pressure Washer,
Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
3M Thermally Conductive Adhesive Transfer Tapes
Technical Data July 215 3M Thermally Conductive Adhesive Transfer Tapes 885 881 8815 882 Product Description 885, 881, 8815 and 882 are designed to provide a preferential heat-transfer path between heat-generating
www.polger.pwh.pl PolGer Wroc³aw u l. Smoluchowskiego 22/1 te l. 071 3281656 COLOR S1821 26 x 10mm S1822 38 x 14mm S1823 47 x 18mm S1824 58 x 22mm
COLOR S82 26 x 0mm S822 38 x 4mm S823 47 x 8mm S824 58 x 22mm S825 70 x 25mm PolGer Wroc³aw u l. Smoluchowskiego 22/ te l. 07 328656 COLOR S82 26 x 0mm S82L 26 x 0mm S822 38 x 4mm S823 47 x 8mm S824 58
Ranking de Universidades de Grupo of Eight (Go8)
En consecuencia con el objetivo del programa Becas Chile el cual busca a través de la excelencia de las instituciones y programas académicos de destino cerciorar que los becarios estudien en las mejores
Tube Type Oil Skimmer Comparison
Process Overview- Tube Type Oil Skimmers Oil flows down the face of the skimmer and into a sludge pan that is plumbed to a barrel. Model BG01 & BG34 or 6V Oil Skimmer 1.0 or 3/4 Diameter Collector Tube
CLAMSHELL DIE CUTTER. General information
2013-1 General information Our clamshell die cutters are designed to die cut many different types of materials like Foam board up to 6 mm thick, laminated board up to 3 mm thick, corrugated board up to
This is the civilian transfer case with the cooling loop only found in the driven gear half of the front case.
INTRODUCTION The Transfer case used in the AMG Hummer is a New Venture Gear, model 242. This case has been in use for the H-1/Hummer since the early 1990 s. There have been modifications to the internal
Jeep Wrangler Diagnosis & Repair Manual Water Leaks
Jeep Wrangler Diagnosis & Repair Manual Water Leaks Rev. A General Notes 1. This manual applies to all Jeep models: 2/4 door & Hard/Soft Top 2. Before testing the vehicle, perform a review of the top system.
RICAMBI FLECK WATERBOOK 2006-2007 - LISTINO GENERALE
RICAMBI FLECK P/N 0 O'ring 560 CD 0 P/N 050 Grommet pass rod 20 2300/230/ 2350 P/N 060 Tube 3/8in (0,92 m) 0 P/N 086 Holding Nut M5 2300 0 P/N 0209-0 Quad Ring 560 CD 0 P/N 028 Microswitch 5 P/N 0220 Screw
REDUCING INK AND SOLVENT USE IN ENCLOSED FLEXOGRAPHIC INKING SYSTEMS
1 REDUCING INK AND SOLVENT USE IN ENCLOSED FLEXOGRAPHIC INKING SYSTEMS Introduction The objective of the flexographic printing process is to transfer solid color, or pigment, while suspended in a volatile
Interior Pocket Door System. A hiding gliding sliding door
Interior Pocket Door System hiding gliding sliding door Introduction good fit for you & the room too Our range of Whatever the style or budget we ve got a choice of 3 sliding pocket door systems that will
Water IBITEL CATALOGUE IBITEL WATER
IBITEL CATALOGUE IBITEL WATER IBITEL En el 2014 comenzamos nuestra andadura apostando por el Agua Personalizada como regalo publicitario. Tras una década, y con este catálogo, os presentamos una línea
The Anatomy of a Label
The Anatomy of a Label Three key elements make up a label: face stock, release liner, and adhesive. Face Stock: Face stock is the material of the label that carries the imprint. The print can be applied
DANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
CNC Ported Big Valve Cylinder Heads. Performance Intake Manifold. Forged Pistons (Engine set with rings, pins and clips)
Performance Engine Assemblies 20001721 2.0lt Performance Crate Engine 205BHP 20001722 2.0lt Performance Crate Engine 225BHP 20001723 2.0lt Performance Crate Engine 255BHP 20001725 2.3lt Performance Crate
HOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
How to Care for your Child s Indwelling Subcutaneous Catheter
The Emily Center How to Care for your Child s Indwelling Subcutaneous Catheter Procedure/Treatment/Home Care Si usted desea esta información en español, por favor pídasela a su enfermero o doctor. #1054
FINGERPRINTING IS A SCIENCE - TAKE A SCIENTIFIC APPROACH
FINGERPRINTING IS A SCIENCE - TAKE A SCIENTIFIC APPROACH FINGERPRINT CLEAN HANDS ONLY DRY HANDS THOROUGHLY ROLL FINGERS FROM NAIL-TO-NAIL NOTE THE CORES AND DELTAS TAKE IMPRESSIONS IN CORRECT ORDER PRODUCE
Guide to adhesively mounting accelerometers
Guide to adhesively mounting accelerometers cmyk Guide to adhesively mounting accelerometers Purpose This technical paper identifies and clarifies issues regarding adhesive mounting of accelerometers.
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre
Marine Catalogue 2013
Marine Catalogue 2013 escription Moel Packaging Hep 2 O Barrier Pipe Re Conuit 15 L = 50 mtr WBCL010305A orer pipe by unit (coil) not by meter 22 L = 50 mtr WBCL010306A straight connector 15 10 pieces
Lubricant Transfer, Storage & Dispensing
Lubricant Transfer, Storage & Dispensing WHY USE OIL SAFE TRANSFER CONTAINERS? OIL SAFE - TRANSFER CONTAINERS For more than a decade, OIL SAFE has been the oil transfer manage- The color-coded range of
GENERAL RUBBER LINING PRINCIPLES
GENERAL RUBBER LINING PRINCIPLES I. METAL PREREQUISITES Metal to be lined should meet the requirements as stated in section 8 Metal Fabrication and section 12 Blasting and Cementing Procedures. The surface
1.- L a m e j o r o p c ió n e s c l o na r e l d i s co ( s e e x p li c a r á d es p u é s ).
PROCEDIMIENTO DE RECUPERACION Y COPIAS DE SEGURIDAD DEL CORTAFUEGOS LINUX P ar a p od e r re c u p e ra r nu e s t r o c o rt a f u e go s an t e un d es a s t r e ( r ot u r a d e l di s c o o d e l a
PowerLine Magnetic-Laser Sheave Alignment System Instructions
PowerLine Magnetic-Laser Sheave Alignment System Instructions The PowerLine Magnetic-Laser Sheave Alignment System laser aligns belts, pulleys, sheaves, sprockets, gear trains, rollers, platforms, conveyors,
ToolLasso System. StepladderAccessories. Load Capacity TL2BC-20 TL2BC-12 TL50 TL5-20 TL5-12
LADDER ACCESSORIES Table of Contents Product Page ToolLasso System 1 JobBucket 2 Pail Shelves and Project Trays 2-3 Stepladder Hanger 3 Extension Ladder Stabilizers 4-5 Ladder Levelers 5-6 Misc. Extension
Fixtures - Parts - Accessories to shampoo bowls
Page 1??? - For what brand of bowl do you need parts??? Find out by looking on the bottom of the bowl, between the front and strainer, where molded in the bottom is the brand and model number. For example,
Stationery List for the School Year 2015-2016
Stationery List for the School Year 2015-2016 In order for you to catch the stationery sales during the summer, we are printing the items that may be purchased outside of school. Please do not purchase
Tuition Reimbursement Program. Handbook
EMPLOY EE Tuition Reimbursement Program Handbook For Employees... Ed u c a t i o n m a d e a f f o r d a b l e! A t t h e E r n e s t O r l a n d o L a w r e n c e B e r k e l e y N a t i o n a l L a b
VDI Tool Holders. for Hardinge Machines. In USA, call: 800-843-8801 In Canada, call: 800-468-5946 Other, call: 607-734-2281 Fax: 607-734-8819
VI ool Holders for Hardinge Machines QUES 6/42, 8/51 and 10/65 CNC athes EIE 8/51 CNC athes HARINGE-EMAG V3/V5 Vertical CNC athes QUES WINURN 65 CNC urning Centers In USA, call: 800-843-8801 In Canada,
Char-Lynn Hydraulic Motors. Repair Information. W Series Geroler Motors 002, 003. April, 1999
Char-Lynn Hydraulic Motors April, 1999 Repair Information W Series Geroler Motors 002, 003 W Series Geroler Motors Tools Required 5/16 inch Hex Key Bullet for Shaft Installation - Eaton Tool No. 600633
TECHNISCHE FICHE - TECHNISCHE FICHE - Chat Board: Classic
- TECHNISCHE FICHE - Chat Board: Classic Classic is a magnetic glass- and writing board for use in modern offices and private homes. CHATBOARD Classic is Danish Design - made in Denmark. Classic is a glass
PARTS BOOK. hohner 48/5S. Stitcher Head. Vol.2 UB706016-01. 110407/hohner48/5S/01/KS
PARTS BOOK hohner /5S Stitcher Head 007/hohner/5S/0/KS Vol. UB70606-0 Hohner /5 Revision Control List Page / Correction (a: Parts No. c: Description d: S/N e: Remarks f: Other g: Registration h: Illustration
PowerLine Magnetic-Laser Pulley Alignment System Instructions
MONARCH INSTRUMENT 15 COLUMBIA DRIVE AMHERST, NEW HAMPSHIRE 03031 PHONE: 603-883-3390 FAX: 603-886-3300 E-mail: [email protected] Web site: www.monarchinstrument.com PowerLine Magnetic-Laser
Manual for GlobePharma Mini-Press II Rotary Tablet Press
1 of 13 Preparing the Rotary Press 1. Make sure the rotary press is unplugged. 2. Open the bottom cabinet of the rotary press and take out the grey tool kit, and the beige box of punches and dies. 3. Take
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS SKATES LIFTING TABLES HAND TROLLEYS PLATFORM HAND TRUCKS SKATES SKATE 1500KG for moving machines and equipment duration oiled metal wheels
Engine. 204-1890 Strobe light, 110V 204-1891 Strobe light, 220V 204-458 Replacement bulb. 204-1057 Compression gauge. 204-166 Dial indicator
The Strobe light checks the unit for: Balance of operating machinery RPM of motors, engine pulleys, fans, etc. Observe belt slippage Strobe light will stop action at speeds from 200 to 6000 RPM 204-1890
Limit Switches/ Receptacle Assembly... For Nuclear Environments
180-302/402 Series Inside ontainment reas TM Limit Switches/ Receptacle ssembly... or Nuclear nvironments eatures: Qualified to I s 344-1975, 323-1974, and 382-1972. Manufactured to a quality assurance
KSC Series Sealed Tact Switch for SMT
KSC Series Features/enefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator
MAN - MERCEDES - BENZ
SAYFA: 1 10100 10102 10103 355 353 06 15 355 353 03 15 346 353 08 15 AXLE GEAR AXLE GEAR AXLE (WITH BUSHING TYPE) (WITH BUSHING TYPE) (WITH BUSHING TYPE) 2521 2517-2521-2622 10104 10105 10106 308 350 00
Gardner Park Elementary Lista de Utiles para Kindergarten 2015-2016
Lista de Utiles para Kindergarten Maletin o morral (SIN rueditas para arrastrar) Una muda de ropa de acuerdo a la estacion (incluyendo calcetines y ropa interior) una caja de 8 crayolas marca crayola Una
Life with Dentures. Helping You Adjust to Your New Smile
Life with Dentures Helping You Adjust to Your New Smile Your New Dentures Adjusting to dentures is challenging. You will have to re-learn basic things such as eating and speaking clearly. You may struggle
How To Order A Direct Flow Air Cleaner
Reduced Volume - Improved Performance - Flexible Packaging The patented Direct Flow technology provides the flexibility to optimize the air system performance to size ratio, meeting the demands of today
K&T Saw Shop 606-678-9623 or 606-561-4983
12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 1 of 16 Accessories www.ktoutdoor.com 12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 2 of 16 Accessories
Metal Free Standing Canopy Assembly Instructions
Before assembly We recommend that time is taken to read the instructions before starting assembly, then follow the easy step by step guide. The instruction sheet is only a guide to the assembly. Certain
The K600i ink jet printer
The K600i ink jet printer It s just so versatile Simple, productive and cost effective printer for variable data printing onto a wide range of media. Scan the code to find more about Domino K600i It s
El modelo estratégico de los canales de. contacto con el cliente dentro de los objetivos. de calidad y rentabilidad
El modelo estratégico de los canales de Click to edit Master text styles contacto con el cliente dentro de los objetivos Second level de calidad y rentabilidad Third level Fourth level Fifth level presentado
Installation Instructions Avalanche XUV Cap IMPORTANT! IMPORTANT!
Installation Instructions Avalanche XUV Cap IMPORTANT! Read all instructions carefully before commencing any work. Always wear safety equipment. Some installation steps will require two or more installers.
TOILET TOILET INSTALLATION KIT WALL CONNECTION
TOILET INSTALLATION KITS BP-A1FPTBR TOILET INSTALLATION KIT WALL CONNECTION FLEX 12" BP-A2FPTBR TOILET INSTALLATION KIT WALL CONNECTION FLEX 16" BP-A2PTB BATHROOM SINK INSTALLATION KIT 1-1/2" WALL CONNECTION
Home-School Connection Pack
Home-School Connection Pack Topics Free fime activities Clothes Describing people Food Places Science Wild animals Celebrations Material on-line para Andalucía incluyendo contenido del Tests & Photocopiable
THERMAL TRANSFER GARMENT LABEL SYSTEM. LCD screen on top of printer
THERMAL TRANSFER GARMENT LABEL SYSTEM LCD screen on top of printer Thermal Transfer Garment Label System ALABELSYSTEM Thermal Transfer Garment Labels. Printer Specifications: Included in Box: 1 Thermal
CITY OF LAREDO Application for Certification of Compliance for Utility Connection ($ 50.00 Application Fee Ordinance No.
CITY OF LAREDO Application for Certification of Compliance for Utility Connection ($ 50.00 Application Fee Ordinance No. 2012-O-158) Date of application: Applicant Address Telephone Cellular E-Mail Address
BSA Goldstar Parts - Price List April 2016. 65-1137 Exhaust Lifter Cable 15.00. 65-1163 Exhaust Lifter Cable Holder S/S 9.00
Rocker Boxes 65-1137 Exhaust Lifter Cable 15.00 65-1163 Exhaust Lifter Cable Holder S/S 9.00 2-443 Exhaust Lifter Cable Holder Nut S/S 0.50 65-401 Exhaust Lifter Spindle Felt 2.00 65-387 Exhaust Lifter
Section 5: Machine Overview
Section 5: Machine Overview Machine Floor Plan Machine Specifications Sequence of Operation Theory of Operation Sensor Location Floor Plan 2007 Douglas Machine Inc. 5.1 Machine Floor Plan Figure 5.1: Machine
Origami ASSEMBLY INSTRUCTIONS SUPPLIED MATERIAL
- HOLES F OR THE WALL PLUGS. - AG UJEROS PARA LOS T ACO S DE FIJACIÓN. - LÖCHER F ÜR DIE DÜBEL. ORIGAMI REF.: 4500 - Use this template t o instal the lamp followind all st ep s d escribed in th e Installation
Jeep Wrangler Diagnosis & Repair Manual Water Leaks
Jeep Wrangler Diagnosis & Repair Manual Water Leaks Rev. A General Notes 1. This manual applies to all Jeep models: 2/4 door & Hard/Soft Top 2. Before testing the vehicle, perform a review of the top system.
THE CANON 106 TONER CARTRIDGE
THE CANON 106 TONER CARTRIDGE DOC# 0381 By Mike Josiah and the Technical Staff at Summit Technologies CANON 106 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS Page 1 Remanufacturing the Canon ImageClass
Assembly instructions VOSS quick connect system 246 NX
Assembly instructions VOSS quick connect system 246 NX Convenient connection, positioning and release A. Important notices Please observe before using the quick connect system VOSS quick connect system
2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure
2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure Derek Guenther 1/28/2015 Rev. Purpose The purpose of this document is to describe the procedure necessary to replace one of the ball nuts
BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
5.3 Cleaning the Printer
5.3 Cleaning the Printer As discussed earlier, the following parts must be cleaned each time the toner container and waste toner box are replaced: Main charger wire Main charger grid Registration roller
The quadrature signals and the index pulse are accessed through five 0.025 inch square pins located on 0.1 inch centers.
Quick Assembly Two and Three Channel Optical Encoders Technical Data HEDM-550x/560x HEDS-550x/554x HEDS-560x/564x Features Two Channel Quadrature Output with Optional Index Pulse Quick and Easy Assembly
Low-cost Solar Desalinator
Low-cost Solar Desalinator Design Team Lauren Fennelly, Steven Roy, John Shea Design Advisor Mohammad Taslim Abstract The goal of this project is to improve upon the solar desalination device built as
G S e r v i c i o C i s c o S m a r t C a r e u ي a d e l L a b o r a t o r i o d e D e m o s t r a c i n R ل p i d a V e r s i n d e l S e r v i c i o C i s c o S m a r t C a r e : 1 4 ع l t i m a A c
Before repairing your toilet, you must determine
Before repairing your toilet, you must determine which type of toilet you have. Pressurized Toilets If you have a pressurized toilet, it is recommended that you call a licensed plumbing contractor to repair
Compact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
Choosing Between Electromechanical and Fluid Power Linear Actuators in Industrial Systems Design
Choosing Between Electromechanical and Fluid Power Linear Actuators in Industrial Systems Design James Marek, Business Unit Director, Thomson Systems Thomson Industries, Inc. 540-633-3549 www.thomsonlinear.com
World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines
40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3
Scotch-Weld TM. DP410 Off-White. Product Data Sheet. Product Description. Key Features Rapid cure at room temperature; cure rate may be accelerated
Scotch-Weld TM Product Data Sheet DP410 Off-White Supersedes: October 2001 Product Description DP410 epoxy adhesive is a low flow, two-part epoxy based structural adhesive. It is designed for use where
New words to remember
Finanza Toolbox Materials Credit Cards, Debit Cards and ATM Cards New words to remember charging minimum payment credit limit interest PIN check register What is a Credit Card? A credit card is a thin
DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Parts Lists - DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PR... Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR125 and DR150 Hensim Dirt
Installation Instructions 4508 4508S
SYMPHONY Spread Lavatory Faucet with Speed Connect Drain Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American Standard faucets. Speed Connect
Removing Language Barriers: Reaching Your Spanish Speaking Audience
Removing Language Barriers: Reaching Your Spanish Speaking Audience Communications Tune Up Webinar Series MAXIMUS Center for Health Literacy Translation Services Group Mercedes Blanco Victoria Williams
How to Care for Your Premature Baby s Skin
The Emily Center How to Care for Your Premature Baby s Skin Child Care/Health Promotion Si usted desea esta información en español, por favor pídasela a su enfermero o doctor. Name of Child: Date: How
Thickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
Installation Instructions 6028.801
DAZZLE Installation Instructions 08.80 Spread Lavatory Faucet with Speed Connect Drain* Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American
2200 Series End Drive Conveyors
00 Series End Drive Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-397-8664 TEL: 6-367-7600 Hartland, WI 5309-000
Now Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
PARTS MANUAL EH12-2 ENGINE. Model. PUB-EP5713 Rev. 7/99
PARTS MANUAL Model EH12-2 ENGINE PUB-EP5713 Rev. 7/99 940 Lively Blvd. Wood Dale, IL 60191 Phone: 630-350-8200 Fax: 630-350-8212 e-mail: [email protected] www.robinamerica.com Copyright 1999 Robin
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 2 CONTENTS-ENGINE ENGINE GROUP ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP FRAME GROUP... 5 4 ENGINE PARTS LIST... 9 5 FRAME PARTS LIST...37 1 ABOUT THIS PARTS
BENCH-TOP CAPSULE FILLING SYSTEM For Use in R&D Pharmacy Compounding Nutritional Supplements Clinical Studies
BENCH-TOP CAPSULE FILLING SYSTEM For Use in R&D Pharmacy Compounding Nutritional Supplements Clinical Studies Options Powder Tray Semi-Automatic Orienter Orienter Filler Powder Vibrator See Page 3 Caps
DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX
Powers Controls TH 192 S Single Temperature Room Thermostat
Technical Instructions Document No. 155-065P25 TH 192-1 Powers Controls TH 192 S Single Temperature Room Thermostat 50 60 70 80 TH0355R1 70 80 POWERS Description The TH 192 S thermostats are proportional
1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
Peel Adhesion of Pressure Sensitive Tape
Harmonized International Standard Call Letters PSTC 101 Date of Issuance 10/00 Revised 10/03 Revised 05/07 Peel Adhesion of Pressure Sensitive Tape 1. SCOPE 1.1 These methods cover the measurement of the
www.jameco.com 1-800-831-4242
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Interactive Catalog Replaces Catalog Pages Honeywell Sensing and Control
Model Modèle Modelo DWC172BL
Model Modèle Modelo DWC172BL WINE COOLER The model number of your wine cooler is found on the serial plate located on the back, top left-hand corner of the refrigerator. All repair parts available for
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
MODEL T200-F18 MODEL T125-F18 Finish Nailers
P MODEL T200-F18 MODEL T125-F18 Finish Nailers IMPORTANT! DO NOT DESTROY It is the customer s responsibility to have all operators and service personnel read and understand this manual. OPERATING MANUAL
INSTALLATION GUIDE 6201 27 TH STREET SACRAMENTO, CA 95822 U.S.A 800-289-4700 TOLL FREE 916-395-4700 PHONE WWW.SUNOPTICS.COM
6201 27 TH STREET SACRAMENTO, CA 95822 U.S.A 800-289-4700 TOLL FREE 916-395-4700 PHONE WWW.SUNOPTICS.COM PARTS LIST 1. 8-18 ½ Drill tip Screw 2. 10-12 x 1 ¼ Drill Tip Screw 3. Bottom Lens Frame 4. Bottom