Inclusive equipment. and experience

Transcription

1 and experience 12

2 funtau Spherical kaleidoscope Fantasy and senses are stimulated by the interaction of light and colour. funtau Spherical kaleidoscope (triple-element) Body stainless steel, standpost diameter 60 mm, Prisms and sphere made of glass Height: approx. 120 cm Diameter: approx. 52 cm Weight: approx. 18 kg The frame has 3 firmly attached prisms directed to the centre glass sphere. The viewing heights are 110 cm. The interplay of colours is created by the rotation of the coloured glass sphere. funtau Spherical kaleidoscope (triple-element) funtau Spherical kaleidoscope (single) Body stainless steel, standpost diameter 48 mm, Special plastic bearings, Prisms and sphere made of glass Height: approx. 120 cm Diameter: approx. 38 cm Weight: approx. 11 kg Frame head with prism and glass sphere, can be rotated and inclined, viewing height between 105 and 115 cm. The interplay of colours is created by the rotation of the coloured glass sphere. funtau Spherical kaleidoscope (single) All units are supplied with base plate (32 cm diameter) with 4 holes for screwing to wooden or stone base. 12-1

3 funtau - Telescope 2 x 60 x 60 x 80 cm Concrete needed: ca m³ Total weight: ca. 30 kg Heaviest individual part: ca. 12 kg funtau - Telescope Body stainless steel, standpost diameter 48 mm, Special plastic bearings, spotting scope plastic/glass (Microscope with argon gas filling to combat misting up from the inside) Height: approx. 120 cm Diameter: approx. 38 cm Weight: approx. 10 kg Frame head with integrated spotting scope, can be rotated and inclined, viewing height between 105 and 115 cm, spotting scope sharp focussing between 10 m and several kilometres. Supplied with base plate (32 cm diameter) with 4 holes for screwing to wooden or stone base. ca. 2 P. x ca. 3.0 h from 5 years 0.70 x 0.30 x 1.30 m funtau-telescope Talk tubes Scale 1:200 Components: 2 Talk tubes 1 Flexible plastic tube (PE-hose) up to m length (must be ordered separately) Talk tubes Cable for talk tubes

4 Fantasy items a b Wheel of Fortune Rotating disc Ripple board Ripple board, can be turned in wall bracket Play principle: At the jigsaw column, children can learn to assign the dots according to 3 sorting methods: 1. Same colours 2. Same number of dots 3. Sorting the dots in ascending or descending order Jigsaw column Note: We explicitly point out that the devices can only be used with supervision. This must be tested in each individual case. 12-3

5 Fantasy items Spiral whirlpool Spiral whirlpool (Detailed view) Three-point pendulum Newton s cradle Streaming panel, gimbal-mounted Streaming panel, wall-mounted, hung to oscillate in wall bracket Note: We explicitly point out that the devices can only be used with supervision. This must be tested in each individual case. 12-4

6 Fantasy items Wind chime labyrinth Wind chimes Only practical in closed facilities Sound stone Humming stone Musical stones Musical stones (Detailed view) Note: We explicitly point out that the devices can only be used with supervision. This must be tested in each individual case. 12-5

7 Inclusive seesaw 8 x 50 x 50 x 80 cm Concrete needed: ca m³ 1 x 60 x 60 x 70 cm Concrete needed: ca m³ Total weight: ca kg ca kg Heaviest individual part: ca kg ca kg ca. 3 P. x ca. 2.0 h Hoisting equipment required ca. 2 P. x ca. 0.5 h 4-12 years Scale 1:200 Components: 1 Inclusive seesaw Illustration: Robinia Inclusive seesaw K R S Rotating stone 6,00 x 1.30 x 1.20 m 0.50 x 0.50 x 0.40 m 1.00 m EN 1176 Design options Coniferous wood: Spruce/pine, green, on galv. steel feet K Coniferous wood: Larch/Douglas fir, glazed, on galv. steel feet L Robinia / oak, glazed R Components: 1 Rotating stone Scale 1:200 Steel posts, galv., wooden parts oak S Rotating stone

8 Shower trunk 8 x 50 x 50 x 100 cm Concrete needed: ca m³ Total weight: ca. 700 kg Heaviest individual part: ca. 280 kg ca. 2 P. x ca. 4.0 h Hoisting equipment required Scale 1:200 Components: 1 Shower trunk 6-14 years Shower trunk R S Ferry x 1.70 x 1.60 m 1.00 m Observe terrain situation EN 1176 R S Design options Robinia / oak, glazed Steel posts, galv., wooden parts oak Components: 2 Jetties 1.36 x 1.36 m, PH 0.45 m 1 Ferry 1 Rope made of polyamide Hercules ropes, m long Scale 1:250 Ferry R S 12-7

9 Windmills Detailed view, stainless steel windmill Scale 1:250 Stainless steel windmill Mooring post R Detailed view, windmill Scale 1:250 Windmill

10 Carved figures View Mermaid View Captain View Pirate Rotating figure Pirate Schwarzbart Pirate Dotterbart Witch Rumpumpel Witch Schrumpeldei

11 Carved animals Duck Owl Raven Abraxas Woodpecker Wood grouse Nuthatch Vulture Bat Squirrel

12 Carved animals Grumpy Shark, upright Frog Parrot Seagull, landing Seagull

13 Signs Butterfly Indian City Water Playground Nuthatch Way Carved Tree Witches Cauldron Mill Cowboy Town 12-12

14 Tree trunks Treebeard Hobgoblin Hobgoblin Shock-headed Peter (front) Rasputin (rear)

15 Tree trunks Grinning Tree Longlegs * Wobbly Tooth * Delivery with laterally screwed-on trunks as opposed to illustration 12-14