Lockout Tagout Presentation For GOSH Group Aberdeen UK
|
|
- Ralph Sharp
- 7 years ago
- Views:
Transcription
1 Lockout Tagout Presentation For GOSH Group Aberdeen UK Presented By Ted Boynton General Manager Lockout Tagout Ltd. T:+44(0)
2 Contents Lockout Tagout Safety Ltd What Is Lockout Tagout Relevant Legislation Principle Lockout Tagout Equipment Example of Lockout Tagout Next Steps For UK companies Q&A T:+44(0)
3 Lockout Tagout Safety Ltd. Lockout Tagout Safety Ltd Provide specialised LO-TO solutions including quality tools and devices from world leading manufacturers to customers across the world. Design & manufacture our own bespoke lockout Devices Premier Distribution rights means value for money on quality products End to End Account Management Initiation; Implementation and during the life of the system Securing your investment from Product Specialists= Fit For Purpose Services Include Free Inspection and LO-TO Project Management. Membership: Corporate Supporter:
4 What Is Lockout Tagout Industrial workers are greatly exposed to electrical and mechanical hazards while servicing equipment and machinery. FACT: Unprotected workers are killed or injured due to workplace accidents. Europe imposes firm regulations (several) that require all power sources to be disabled during the maintenance and repair of industrial machinery. Lockout Tagout is an important security procedure that involves shutting off the power to industrial machines or equipment during maintenance or repair Lockout Tagout procedures prevent the accidental activation of equipment and minimizes the electrical and mechanical hazards faced by industrial workers.
5 Definition of Lockout Lockout : The placement of a locking device on an energy control device which COMMUNICATES that the equipment being controlled should NOT be operated until the locking device has been removed THREE main types of energy that LOTO is concerned with are: Mechanical the movement of a piece of machinery E.g. a printing press Chemical - The flow of a substance or chemical in a pipe E.g. steam/water Electrical The flow of electricity in an exposed installation Locking out prevents the release of unforeseen and dangerous energy surges
6 Definition of Tagout TAGOUT is the placement of a tag which indicates that the energyisolating device and the equipment being controlled MUST NOT be operated until the tag has been removed. Tagout helps communicate the risk
7 Lockout Tagout Video Accident Lockout Tagout Is not applied
8 Lockout Tagout Video Avoiding Accidents When Lockout Tagout Is Applied
9 Why Lockout Tagout / Advantages Lockout tagout is normally used when maintenance work is being performed. This could be: Cleaning equipment Adjusting equipment Repairing equipment When equipment is being set up or installed It acts as a tool to communicate what is being done, who is doing it, where and for how long. * Safe Working - protects industrial workers * Prevents accidents and injuries * Protects equipment from damage * Minimizes workplace errors * Raises level of awareness on industrial hazards It is a procedure which clearly communicates risk in the workplace
10 Relevant Legislation The Regulators View HSE The primary responsibility or managing risks rests with those who create the risk in the first place that means employers, self employed and manufacturers or suppliers of articles or substances for use at work Judith Hackett HSE Chair Provision of Work Equipment Regulations 1998 Regulation 19 Isolation from Sources of Energy, Paragraph 2.14, European Union (EU) Guidelines 89/655 "Every piece of equipment must be fitted with clearly visible devices with which it can be separated from every energy source. OSHA (a)(3)(i), The Control of Hazardous Energy (Lockout/Tagout), employers to establish a program and utilize procedures for affixing appropriate lockout devices (Occupational Safety and Health Association) Most comprehensive legislation worldwide regarding LOTO is in the US
11 Important New Legislation Health & Safety (Offences) Act 2008 Became Law In January 2009 Not just Manslaughter Act - Homicide Act in Scotland Lower Local Courts Impose fines for non compliance ( 5K- 20K) Up to 12 Months imprisonment If non-compliance resulted in serious injury or death then High Courts would manage case Unlimited fine 2 years imprisonment to life Regulators View We make no apology for taking a strong stance on enforcement Judith Hackett HSE Chair
12 Important New Legislation Health & Safety (Offences) Act 2008 Goals : - Reduce Injuries Motivate those in Health & Safety that they contributed to improved H&S performance Those with Heath & Safety duties that fail are brought to account Consequences:- Fines Imprisonment Directors Disqualification Brand Damage/PR Business Ending Staff Morale/Welfare 21st September T:+44(0)
13 HSE LINK deo.htm
14 Lockout Tagout Resource Centre Resource Icon on right hand side of website Lockout Tagout (LOTO) Safety Catalogue (Download) Lockout Tagout Newsletter Lockout Tagout Blog HSE Video On Lockout Tagout Lockout Tagout Presentation Lockout Tagout News Datasheets Loto Devices Videos <How to operate>
15 To Summarise LOTOTO SWITCH OFF LOCKOUT TAG OUT TEST OUT
16 Principal Equipment Of a Lockout Tagout Program LOTOTO Equipment *Safety Padlock The most important part of LOTOTO system. One padlock, one person, one key. The key is unique to the lock and the person. Key trapped in padlock when shackle is open. Key cannot be duplicated. 7th December T:+44(0)
17 Principal Equipment Of a Lockout Tagout Program LOTOTO Equipment Safety Hasp The hasp is used when more than one engineer needs to work on the same isolated equipment 7th December T:+44(0)
18 Principal Equipment Of a Lockout Tagout Program LOTOTO Equipment *Circuit Breaker Lock Circuit breaker lock for low voltage electrical isolation 7th December T:+44(0)
19 Principal Equipment Of a Lockout Tagout Program LOTOTO Equipment *Safety Tag The tag explains who is working on the machinery and when they expect to finish their work 7th December T:+44(0)
20 Principal Equipment Of a Lockout Tagout Program LOTOTO Equipment Valve Lockout All sizes and types of valves can be locked to prevent operation. 7th December T:+44(0)
21 Principal Equipment Of a Lockout Tagout Program LOTOTO Equipment *Cable Lockout Cable lockouts are very versatile, for use with valves and switches. 7th December T:+44(0)
22 Principal Equipment Of a Lockout Tagout Program *Small Gate Valve Small Gate Valve Lockout 7th December T:+44(0)
23 Principal Equipment Of a Lockout Tagout Program Small Ball Valve 7th December T:+44(0)
24 Principal Equipment Of a Lockout Tagout Program Rotating Switch ON / OFF Padlock Hole Some machinery may not have an isolating switch. These will need to be reviewed. Padlock & Hasp fit directly onto switch only if there is a padlock hole. 8th November T:+44(0)
25 Principal Equipment Of a Lockout Tagout Program Large Gate Valve Valve wheel lockout Cable Lockout 7th December T:+44(0)
26 Principal Equipment Of a Lockout Tagout Program *Switchgear Panel Individual padlock with hasp OR Cable Lockout for multiple switches 7th December T:+44(0)
27 Principal Equipment Of a Lockout Tagout Program Butterfly Valve Butterfly Valve Lockout 7th December T:+44(0)
28 Principal Equipment Of a Lockout Tagout Program Low Voltage miniature circuit breaker (MCB) 7th December T:+44(0)
29 Lockout Station Standard Lock Boards Departmental Custom Lockout Shadow Boards
30 Video Lockout Tagout 9 Basic Steps 7th December T:+44(0)
31 Example Of Lockout Tagout
32 Master Keyed Padlock Systems Generic System
33 Example of a LO-TO Application/System Correct Use Of Padlocks is Key Why? Well defined LO-TO procedure with a clear padlock control policy will ensure safety & protect investment in your Lockout Tagout Safety procedures E.G Two Types of Padlock Categories 1: Isolation Padlocks actually placed on isolation switches with tag and or hasp. 2: Safety Padlocks used with hasp on Lockout Box holds isolation key/s and fuses other isolation keys (electrical) Identifies approval by each work group that area of work has been safely locked out
34 Example of a LO-TO Application/System (Top Level) Permit Issuer/Primary Acceptor : Define Scope Lockout Job + Return Isolation padlock Key with Additional Elec keys /Fuses Into Lockout Box Lockout Form Completed /Updated Permit Issuer Key Padlock Cabinet Permit Issuer Places Padlock on Lockout Box and locks off box with Permit Issuers unique Padlock + key Prepare Permit To Work When Permit Acceptor accepts isolation is complete he places colour coded padlock on to lockout box E.G Permit Acceptor Types Permit Issuer = Yellow Safety Padlock Fitter = Red Safety Padlock Electrician = Blue Safety Padlock Tiffy = Orange Safety Padlock Outside Contractor = Black
35 Example of a LO-TO Application/System (Top Level) LO-TO Key holders Form Updated All Supplementary Acceptors Have Accepted Work Permit (Signed up to Isolation Lockout ) Work Is Now Carried Out According To Plan Colour Coded Padlock On Lockout Box Containing where all isolation padlock keys/fuses etc are locked out As work groups finish their supplementary tasks they remove their colour coded lock from Lockout Box & sign off Key Holder Form All Work Groups taken locks off Lockout Hasp Job Complete Permit Acceptor & Permit Issuer Agree work complete & execute Companies Completion procedure
36 Next Steps For Companies Legislation : Corporate Manslaughter/Homicide 1 st Successful conviction in Feb 11 Better Regulation Target Enforcement Personal Liability Detailed Presentation To key workers involved in Lockout Tagout/Permit To Work Systems Raising awareness of LOTO e.g. Posters Involve Staff in Loto practices/procedures/reviews (Ensure Buy in)
37 Lockout Tagout Safety Ltd
38 Q&A
Lockout / Tagout Awareness
Lockout / Tagout Awareness 1 Introduction Lockout/Tagout ( LOTO ) is a technique used to prevent energy from being released during the servicing of equipment. This is accomplished by placing locks on energy
More informationALVERNIA UNIVERSITY OSHA REGULATION: 29 CFR 1910.147 THE CONTROL OF HAZARDOUS ENERGY (LOCKOUT / TAGOUT) SECTION: 2400
OSHA REGULATION: 29 CFR 90.7 THE CONTROL OF HAZARDOUS ENERGY (LOCKOUT / TAGOUT) DATE: 0/5/2008 DATE: /2/202 A. POLICY. This procedure follows requirements set forth in 29 CFR 90.7. 2. It is the policy
More informationCONTROL OF HAZARDOUS ENERGY (Lockout Tagout)
CONTROL OF HAZARDOUS ENERGY (Lockout Tagout) Many workplace accidents are caused by machinery that accidentally becomes activated while being serviced or maintained. This accidental activation is called
More informationLOCKOUT/TAGOUT (LOTO) SAFETY PROGRAM
1 UNIVERSITY OF WEST FLORIDA LOCKOUT/TAGOUT (LOTO) SAFETY PROGRAM (EQUIPMENT HAZARD DE-ENERGIZING AND ISOLATION) DEPARTMENT OF ENVIRONMENTAL HEALTH AND SAFETY 11000University Parkway Pensacola, FL 32514
More informationWEEKLY SAFETY MEETING All Euramax Subsidiaries LOCKOUT / TAGOUT. Safety Meeting Contents. Meeting Notice. Leaders Guide.
Safety Meeting Contents Meeting Notice Leaders Guide Employee Handout Employee Quiz Meeting Sign-In Sheet Employee Puzzle PRIOR TO THE WEEKLY MEETING: - Post the meeting notice by the timeclock - Read
More informationLockout / Tagout Program
Lockout / Tagout Program Table of Contents Page Scope... 2 Definitions... 2 Authorization... 3 Responsibilities... 4 Compliance and Enforcement... 4 When to Lockout/Tagout (LOTO)... 5 Lockout Procedure...
More informationLockout/Tagout Compliance Guide and Checklist
Lockout/Tagout Compliance Guide and Checklist Scope: The OSHA Control of Hazardous Energy (Lockout/Tagout) standard (29 CFR 1910.147) covers the servicing and maintenance of machines and equipment in which
More informationPage85. Lock-out Tag-out Plan
Page85 Lock-out Tag-out Plan Page86 Lock-out / Tag-Out Plan Table of Contents 1. Policy 2. Purpose 3. Scope 4. General Procedures 5. Application of Control Procedure 6. Release from Control Procedure 7.
More informationLockout - Tagout Program
Created by: Nora Velazquez Date: 02/13/03 Approved by: Nora Velazquez Supersedes: New Lockout - Tagout Program 3.1 Purpose 3.1.1 The safe control of hazardous energy is the purpose of the Lockout- Tagout
More informationLockout - Tagout. Control of Hazardous Energy OSHA Standard 1910.147
Lockout - Tagout Control of Hazardous Energy OSHA Standard 1910.147 You will learn Purpose of Lockout-Tagout Requirements for LOTO Types of Hazardous Energy Procedures for LOTO Types of Energy Electrical
More informationLockout Tagout Program. Table of Contents
Environmental Health and Safety Name: Lockout Tagout Program Date Created: 2/1/2014 Date Revised: 11/17/2014 Created By: Jill Jones Table of Contents Purpose and Regulatory Standards... 1 Scope... 1 Employer
More informationLOCK-OUT / TAG-OUT SAFETY TRAINING
LOCK-OUT / TAG-OUT SAFETY TRAINING Introduction Welcome to Lock-out Tag-out Training "So I m on the job one day, doing some repair on a cutting machine.replacing a guide on the table. Pretty routine everything
More information3088 Lockout-Tagout Training Program Course Outline
3088 Lockout-Tagout Training Program Course Outline The following outline summarizes the major points of information presented in the course. The outline can be used to review the course before conducting
More informationOccupational Health Program Safety Training Series. Lockout/Tagout Safety Awareness Training
Occupational Health Program Safety Training Series Lockout/Tagout Safety Awareness Training 1 Lock out/tag out Lock out: the placement of a lockout device (lock) on an energy isolating device in accordance
More informationControl of Hazardous Energy (Lockout / Tagout)
WAUKESHA COUNTY TECHNICAL COLLEGE Control of Hazardous Energy (Lockout / Tagout) Release Date: March 26, 2012 Revision Date: March 26, 2012 Revision Level: 1 TABLE OF CONTENTS Purpose... 1 Scope... 1 Responsibilities...
More informationEnergy Control Lockout/Tagout
Energy Control Lockout/Tagout Page Introduction Purpose. 2 Background. 2 Who s Covered... 3 Responsibilities. 3 Explanation of Key Terms. 4 How It Works General Lockout/Tagout Procedure. 5 General Lock/Tag
More informationHealthStream Regulatory Script
HealthStream Regulatory Script Control of Hazardous Energy: Lockout/Tagout Release Date: August 2009 HLC Version: 602 Lesson 1: Introduction Lesson 2: Energy Control Basics Lesson 2: Lockout and Tagout
More informationRMM 306 Lockout/Tagout (LOTO) Program for the Control of Hazardous Energy Page 2 June 2016
RMM 306 Lockout/Tagout (LOTO) Program for the Control of Hazardous Energy Page 2 3 Related Documents 3.1 Occupational Health and Safety Act, R.S.O. 1990 3.2 Regulations for Industrial Establishments, R.R.O.
More informationC3306 LOCKOUT/TAGOUT FOR AUTHORIZED EMPLOYEES. Leader s Guide. 2005, CLMI Training
C3306 LOCKOUT/TAGOUT FOR AUTHORIZED EMPLOYEES Leader s Guide 2005, CLMI Training LOCKOUT/TAGOUT FOR AUTHORIZED EMPLOYEES This easy-to-use Leader s Guide is provided to assist in conducting a successful
More informationLockout/Tagout (LOTO) Compliance Guide
Lockout/Tagout (LOTO) Compliance Guide Prepared for By Date Scope The OSHA Control of Hazardous Energy (Lockout/Tagout) standard (29 CFR 1910.147) covers the servicing and maintenance of machines and equipment
More informationLockout/Tagout. Training: 29 CFR-1910.148 Lockout Tagout Standard States employer must provide training on lockout tagout.
Lockout/Tagout Training: 29 CFR-1910.148 Lockout Tagout Standard States employer must provide training on lockout tagout. Lockout/Tagout System Helps safeguard employees from the unexpected startup of
More informationL O C K O U T / TA G O U T A D M I N I S T R AT I V E G U I D E
L O C K O U T / TA G O U T A D M I N I S T R AT I V E G U I D E 2009 Comprehensive Loss Management, Inc. This material is the property of CLMI Safety Training and may not be reproduced or distributed in
More informationLOCKOUT/TAGOUT PROGRAM ENERGY CONTROL PLAN
LOCKOUT/TAGOUT PROGRAM ENERGY CONTROL PLAN March 2003 (Revised) St. Louis Community College Table of Contents Section # Title Page # 1 Purpose 1 2 Applicability 2 3 Program Overview 3 4 Energy Control
More informationLockout/Tagout Training Program
Lockout/Tagout Training Program (Student Handouts) Name Date This page intentionally left blank. Notes page: 2 Notes page: 3 Sample Written Program for Control of Hazardous Energy (Lockout/Tagout) 4 1910.147
More informationControl of Hazardous Energy LOCKOUT/TAGOUT 29 CFR 1910.147
Control of Hazardous Energy LOCKOUT/TAGOUT 29 CFR 1910.147 Contents I. Introduction II. Scope and Application III. Definitions IV. Lockout/Tagout Manual V. Energy Control Procedures 1. Applying Energy
More informationsection 5 machine guarding and lockout
section machine guarding and lockout This section covers ways to physically protect people working in and around machinery. It includes information on: machinery guards lockout systems emergency stop confined
More informationLOCK-OUT/TAG-OUT PROGRAM I. Purpose
LOCK-OUT/TAG-OUT PROGRAM I. Purpose This procedure establishes requirements for the lockout of energy isolating devices. It should be used to ensure that the machine or piece of equipment is isolated from
More informationLOCKOUT GUIDELINE. To ensure that a piece of equipment cannot be turned on, pressurized or switched on accidently while an employee is working on it.
Background LOCKOUT GUIDELINE Both Aspasa in its ISHE (Initiating Safety Health & Education) program and Sarma in its SHREQ (Safety, Health, Road Transport, Environment & Quality) program have seen that
More informationISSUE: LOCK OUT BLOCK OUT
ISSUE: LOCK OUT BLOCK OUT (September 30, 2008) Working to field a lock out block out standard operating procedure (SOP) to target procedures staff must perform in securing vehicle systems. This is somewhat
More informationCONTROL OF HAZARDOUS ENERGY/ LOCKOUT/TAGOUT PROGRAM
CONTROL OF HAZARDOUS ENERGY/ LOCKOUT/TAGOUT PROGRAM Northern Illinois University Department of Environmental Health and Safety March 2015, Rev 0 Review and Updates Date Reviewed by Changes Made Page 2
More informationLockout-Tagout Training for University @ Albany Employees Control of Hazardous Energy OSHA standard 1910.147
Lockout-Tagout Training for University @ Albany Employees Control of Hazardous Energy OSHA standard 1910.147 University @ Albany SUNY Office of Environmental Health & Safety 518/442-3495 October 2010 Primary
More informationUniversity of Nevada, Reno
University of Nevada, Reno THE CONTROL OF HAZARDOUS ENERGY (LOCKOUT/TAGOUT) PROGRAM Program Contact Person: John A. Braun, CSP Environmental Health and Safety University of Nevada, Reno Phone: 775-784-6478
More informationBWC Division of Safety and Hygiene
BWC Division of Safety and Hygiene A SAMPLE LOCKOUT/TAGOUT PROCEDURE A good Lockout/Tagout Procedure, at a minimum, should contain the following elements: 1. All maintenance personnel shall be provided
More informationLock-out/Tag-out. http://www.utdallas.edu/ehs
Lock-out/Tag-out Environmental Health and Safety Department 800 West Campbell Rd., SG10 Richardson, Tx 75080-3021 Phone 972-883-2381/4111 Fax 972-883-6115 http://www.utdallas.edu/ehs Modified: March 2012
More informationFile Name: LO/TO Orig. Date: November 2005 Revision Date:November 2006 Reviewed Date: November Standard: OSHA: 29CFR1910147
File Name: LO/TO Orig. Date: November 2005 Revision Date:November 2006 Reviewed Date: November Standard: OSHA: 29CFR1910147 Messiah College Lockout/Tagout Policy and Procedure Policy: Objectives: It is
More informationSafe Operating Procedure
Safe Operating Procedure LOCKOUT/TAGOUT FOR MACHINES & EQUIPMENT: SPECIAL CIRCUMSTANCES (For assistance, please contact EHS at (402) 472-4925, or visit our web site at http://ehs.unl.edu/) Introduction
More informationDepartment of Environmental Health & Safety. Lock Out/Tag Out Program. Date Effective: November 2010
Department of Environmental Health & Safety Lock Out/Tag Out Program Issued by: Jeff Campbell Date Effective: November 2010 Date Revised: April 2014 General Policy Ohio University Lockout/Tagout Policy
More informationNo. Name of Legislation Applicable Issues and Requirements Demonstration of Compliance 1. Health and Safety at Work Act 1974
The Police Treatment Centres Health and Safety Legal Compliance Register No. Name of Legislation Applicable Issues and Requirements Demonstration of Compliance 1. Health and Safety at Work Act 1974 2.
More informationLOCKOUT/TAGOUT PROGRAM. Table of Contents
Western University of Health Sciences IIPP SUB-PROGRAM LOCKOUT/TAGOUT PROGRAM Table of Contents 1.0 INTRODUCTION 1 2.0 PURPOSE 1 3.0 RESPONSIBILITIES 1 Supervisors 1 Employees 1 4.0 TRAINING 2 5.0 WRITTEN
More informationELECTRICAL SAFETY. The standard unit for measuring electrical current.
ELECTRICAL SAFETY Introduction The following sections provide general safety guidelines and procedures for electrical safety. This chapter covers the following topics: TOPIC PAGE General Electrical Safety
More informationRelease 1. BSBWHS508A Manage WHS hazards associated with plant
Release 1 BSBWHS508A Manage WHS hazards associated with plant BSBWHS508A Manage WHS hazards associated with plant Modification History Release Release 1 Comments This Unit first released with BSB07 Business
More informationCitation 1 Item 1a. #22: Struck by Inspection #1081105
A 35 year old male employee was removing a high pressure hydraulic hose from an aluminum die-casting machine accumulator, when it fatality struck the employee in the neck & chest. The 3,000 ton die cast
More informationWorkplace Safety and Health (Risk Management) Regulations
A Guide to the Workplace Safety and Health (Risk Management) Regulations 1 Contents Introduction 2 Workplace Safety and Health (Risk Management) Regulations - Why is there a need for the Workplace Safety
More informationBriefing 43. The Corporate Manslaughter and Corporate Homicide Act 2007. NHS Employers. Background. Key points
March 2008 Briefing 43 The Corporate Manslaughter and Corporate Homicide Act 2007 (CMCHA) comes into effect on 6 April 2008. The Act aims to ensure that organisations are held to account when a death has
More informationADVICE NOTE HEALTH AND SAFETY. A summary of the main health & safety regulations that apply to blocks of flats
ADVICE NOTE HEALTH AND SAFETY A summary of the main health & safety regulations that apply to blocks of flats 2 CONTENTS Note: As the leading trade body for residential leasehold management, ARMA is also
More informationPreventative Maintenance Policy
Section 7 - Preventative Maintenance Preventative Maintenance Policy It is the Company Policy of to ensure that all equipment, vehicles, and tools are properly maintained in a condition that will maximize
More informationControl of Hazardous Energy
Control of Hazardous Energy Lockout/Tagout OSHA 3120 2002 (Revised) Control of Hazardous Energy Lockout/ Tagout U.S. Department of Labor Elaine L. Chao, Secretary Occupational Safety and Health Administration
More informationOSHA Training Guidelines (An Unofficial Summary)
OSHA Training Guidelines (An Unofficial Summary) Many standards promulgated by the Occupational Safety and Health Administration (OSHA) explicitly require the employer to train employees in the safety
More informationRecommendations to improve the safety of existing lifts
Recommendations to improve the safety of existing lifts Lift & Escalator Industry Association Lift Safety an introduction Lifts are amongst the very few modes of transport available for continuous unsupervised
More informationPALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT
PALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT Department: Facilities Campus: All Task: Check/Service/Maintain/Repair/Install HVAC Equipment and Systems Job Title(s)
More informationYour Rights, Responsibilities, and the Occupational Health and Safety Act
Labour and Advanced Education Occupational Health and Safety Your Rights, Responsibilities, and the Occupational Health and Safety Act This page and all contents are Crown copyright 2007, Province of Nova
More informationEverything You Wanted to Know About First Aid Kits but Didn t Know Who to Ask
OSHA s Letter of Interpretation Everything You Wanted to Know About First Aid Kits but Didn t Know Who to Ask Presented By The Carlyle Consulting Group For a free subscription to our free monthly e-newsletter
More informationHERSHEY ENTERTAINMENT & RESORTS COMPANY LOCKOUT / TAGOUT PROCEDURE
HERSHEY ENTERTAINMENT & RESORTS COMPANY LOCKOUT / TAGOUT PROCEDURE The purpose of this program is to utilize procedures for affixing appropriate lockout devices or tagout devices to energy isolating devices,
More informationHealth, Safety and Welfare in Construction and the Built Environment
Unit 1: Health, Safety and Welfare in Construction and the Built Environment NQF Level 3: Guided learning hours: 60 BTEC National Unit abstract Health, safety and welfare are of paramount importance to
More informationMaster Workplace Inspection Checklist for General Shop Safety. MASTER WORKPLACE INSPECTION CHECKLIST General Shop Safety
Integrated Risk Management Master Workplace Inspection Checklist for General Shop Safety Document Type: Form Control Number: UIRM- FM_012_50 File Code: UIRM-001 Last Reviewed: March 2014 Department/Unit:
More informationElectricity at work Safe working practices
Electricity at work Safe working practices The guidance covers the key elements to consider when devising safe working practices and is for people who carry out work on or near electrical equipment. It
More informationWhat s up with Arc Flash?
What s up with Arc Flash? Presented by Mark Haskins, CSP Practical Safety Solutions, LLC CONN OSHA Breakfast Roundtable February 18, 2014 2014 Practical Safety Solutions, LLC What is Arc Flash? Definition
More informationHealth & Safety Update Diane Turner
Aberdeen Edinburgh Glasgow Health & Safety Update Diane Turner IOSH Edinburgh Branch Date 11 April 2013 Areas covered Changes in the regulatory environment Review of prosecution trends Case law update
More informationOSHA SAFETY TRAINING TABLE for more information see www.osha.gov
OSHA SAFETY TRAINING TABLE for more information see www.osha.gov CATEGORY DESCRIPTION WHO RECEIVES HOW OFTEN AWAIR Requires employers to set up a written accident & injury reduction program based on clearly
More informationREVIEW OF ELECTRICITY (CONSUMER SAFETY) ACT 2004 ISSUES PAPER
REVIEW OF ELECTRICITY (CONSUMER SAFETY) ACT 2004 ISSUES PAPER April 2010 HOW TO MAKE A SUBMISSION Written submissions are invited to this Issues Paper. Please send submissions by email to: policy@services.nsw.gov.au
More informationHealth & Safety Regulations. Everything you need to know
Health & Safety Regulations Everything you need to know Not all of those people injured at work would be entitled to compensation from their employer. In order to recover damages it is necessary to show
More informationElectrical Safety in the Workplace
Electrical Safety in the Workplace NFPA 70 E Presented by Sabine Mueller What Made Sabine Choose Such a DRY Topic? Ulterior Motive Metso Mueller Engineering has been visiting many scrap yards two or more
More informationCircuit Electrical Testing
Safe Isolation Procedure Circuit Electrical Testing Site Safety Management It is essential from the outset that effective management and control of the system, apparatus and equipment used on site is achieved
More informationA Short Guide to The Safety, Health and Welfare at Work Act, 2005
A Short Guide to The Safety, Health and Welfare at Work Act, 2005 3 A Short Guide to the Safety, Health and Welfare at Work Act, 2005 Published in August 2005 by the Health and Safety Authority, 10 Hogan
More informationHealth and Safety Policy Part 1 Policy and organisation
Health and Safety Policy Part 1 Policy and organisation ICO H&S Policy Policy and organisation, June 2014 Page 1 of 6 1. Scope 1.1 The Health and Safety policy applies to all employees of the Information
More informationADVICE to safety representatives
UNITE LEGAL SERVICES - TRUST YOUR UNION ADVICE to safety representatives Unite has launched a new asbestos campaign aiming to: Raise members awareness of asbestos hazards at work Provide advice to Unite
More informationPreventing Workplace Injuries. Mike Griffiths, HM Inspector of Health and Safety
Mike Griffiths, HM Inspector of Health and Safety 3 most common causes of Fatal / Life-changing incidents in factories: Falls from Height Workplace Transport Machinery What issues occur consistently in
More informationCarlisle City Council Health and Safety Policy and Procedures PAGE Page 1 of 14. Health & Safety Enforcement Policy Revision No: 1 Date: July 2009
Health and Safety Policy and Procedures PAGE Page 1 of 14 1. Purpose This document establishes the Health and Safety Enforcement Policy and Procedures of Carlisle City Council. 2. Application This policy
More informationSAFETY - LIFE SAVING RULES MECHANICAL ISOLATION CAT A-1 SOP #3
SUNCOR ENERGY PRODUCTS DISTRIBUTION TERMINAL OPERATING MANUAL STANDARD OPERATING PROCEDURE SAFETY - LIFE SAVING RULES Verify isolations of hazardous energy before any work begins. Date Issued: February
More informationElectrical Practices for Construction Work
1. Purpose Electrical Practices for Construction Work The purpose of this Code is to provide practical guidance and set minimum safety requirements for electrical practices on all construction sites in
More informationBusiness Unit/Area: N/A. Protocol No.: COR-3S3-PR
Page 1 Overview Purpose This Devon Energy EHS Protocol establishes minimum requirements for securing, locking and tagging out energyisolating devices, and for the protection of workers from the unexpected
More informationGUIDANCE ON ELECTRICAL INSPECTIONS
GUIDANCE ON ELECTRICAL INSPECTIONS Electricity Electricity is a versatile and convenient source of energy. However, it can be potentially dangerous if the system has not been properly designed, installed,
More informationApproved Contractor Application (SAFE Form B)
Approved Contractor Application (SAFE Form B) 1. Business Information Company Name: Postal Address: Physical Address: (If differs from Postal) Phone: Mobile: Email Address: Number of Employees: 2. Key
More informationMORE HIGH-IMPACT LOCKOUT/TAGOUT SAFETY TRAINING
MORE HIGH-IMPACT LOCKOUT/TAGOUT SAFETY TRAINING This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief description of the program
More informationMassachusetts FACE Occupational Fatality Report
Massachusetts FACE Occupational Fatality Report Massachusetts Department of Public Health Occupational Health Surveillance Program Fatality Assessment and Control Evaluation Project Apprentice Electrician
More informationROGERS SPECIALIST CARS LTD T/A CATERHAM HIRE WALES
ROGERS SPECIALIST CARS LTD T/A CATERHAM HIRE WALES TERMS AND CONDITIONS OF RENTAL In these terms and conditions reference to we, us or our means ROGERS SPECIALIST CARS LTD T/A CATERHAM HIRE WALES, a limited
More informationCompany Safety & Health Policy Statement
Company Safety & Health Policy Statement The Oregon Safe Employment Act of 1973 clearly states our common goal of safe and healthful working conditions. Safety and health of our employees continues to
More informationOperating instructions Diffuse reflection sensor with background suppression O1D101 O1D104 706114 / 00 01 / 2012
Operating instructions Diffuse reflection sensor with background suppression O1D101 O1D104 706114 / 00 01 / 2012 Contents 1 Preliminary note 3 1.1 Symbols used 3 1.2 Warning signs used 3 2 Safety instructions
More informationNFPA 70E 2012 Rolls Out New Electrical Safety Requirements Affecting Data Centers
NFPA 70E 2012 Rolls Out New Electrical Safety Requirements Affecting Data Centers A market position paper from the experts in Business-Critical Continuity TM Executive Summary Electrocutions are the fourth
More informationMachine Guarding and Operator Safety. Leader Guide and Quiz
4646 Machine Guarding and Operator Safety Leader Guide and Quiz Leader s Guide MACHINE GUARDING & OPERATOR SAFETY INTRODUCTION: A brief description of the program and the subject that it addresses. This
More informationWork Permits. A Health and Safety Guideline for Your Workplace. When is a Work Permit Needed? What is a Work Permit? Why use a Work Permit?
A Health and Safety Guideline for Your Workplace What is a Work Permit? A work permit is a written form used to authorize jobs that expose workers to serious hazards. It identifies the work to be done,
More informationGuide to Gate Safety Legislation & the Machinery Directive. In Association with:
Guide to Gate Safety Legislation & the Machinery Directive In Association with: Tel: 0191 267 4922 info@primeautomation.co.uk Tel: 0191 267 4922 Email: info@primeautomation.co.uki Guide to Gate Safety
More informationKELLER S 5-MINUTE WORKPLACE SAFETY TALKS
KELLER S 5-MINUTE WORKPLACE SAFETY TALKS Machine Guarding An Overview Overview Of Topic Machine operators who understand a machine s hazards and how to control them will have a reduced risk of injury.
More informationSix steps to Occupational Health and Safety
Six steps to Occupational Health and Safety This booklet gives basic guidelines for workplace health and safety systems to help industry in NSW comply with the "duty of care" principle outlined in the
More informationCorporate Health and Safety Policy
Corporate Health and Safety Policy November 2013 Ref: HSP/V01/13 EALING COUNCIL Table of Contents PART 1: POLICY STATEMENT... 3 PART 2: ORGANISATION... 4 2.1 THE COUNCIL:... 4 2.2 ALLOCATION OF RESPONSIBILITY...
More informationF.A.C.E. INVESTIGATION REPORT
F.A.C.E. INVESTIGATION REPORT Fatality Assessment and Control Evaluation Project FACE #94-NJ-009-01 Foreman Crushed to Death After Being Caught in a Screw Conveyor New Jersey Department of Health and Senior
More informationElectrical Wiring Methods, Components and Equipment for General Use. Approved for Public Release; Further Dissemination Unlimited
Electrical Wiring Methods, Components and Equipment for General Use Approved for Public Release; Further Dissemination Unlimited At the completion of this unit you shall be able to: 1. Utilize section
More informationHealth and Safety in the Engineering Workplace
Unit 1: Health and Safety in the Engineering Workplace Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose T/600/0249 BTEC National This unit will give learners an understanding
More informationCommon Electrical Hazards in the Workplace Including Arc Flash. Presented by Ken Cohen, PhD, PE & CIH (Ret.)
Common Electrical Hazards in the Workplace Including Arc Flash Presented by Ken Cohen, PhD, PE & CIH (Ret.) 1 What s New In February 1972, OSHA incorporated the 1971 edition of the National Fire Protection
More informationElectrocution Hazards
Electrocution Hazards 1 Electricity Accidents People who work directly or indirectly with electricity can be the victims of serious electrocution injury or death on construction sites. These accidents
More informationOSHA Regulation and the Growing Popularity of Employee Leasing Programs. Including Temporary Worker Services and Professional Employer Organizations
OSHA Regulation and the Growing Popularity of Employee Leasing Programs Including Temporary Worker Services and Professional Employer Organizations Jeffry Carter RMS Regulatory Services John D. Surma Of
More informationGuidance for Stationary Refrigeration & Air-Conditioning
Information Sheet RAC 3 Key Obligations Guidance for Stationary Refrigeration & Air-Conditioning This Information Sheet provides a description of the key obligations under the EC F gas and Ozone Regulations
More informationWHS Policies and Procedures Package
WHS Policies and Procedures Package The following is an extract to highlight the style and layout of this publication, as well as a snapshot of the content. Some samples may not be included in their entirety
More informationSTAY COMPLIANT. MAKE P-TOUCH AN ESSENTIAL PART OF YOUR KIT.
STAY COMPLIANT. MAKE P-TOUCH AN ESSENTIAL PART OF YOUR KIT. The Brother P-touch series of electrical label printers www.brother.co.uk/electricians 2 NEXT TIME, HAVE THE NUMBER ONE * BRAND AT YOUR SIDE
More informationHazard Identification, Risk Assessment And Control Procedure
Hazard Identification, Risk Assessment And Control Procedure 1. Purpose 1.1 To ensure that there is a formal process for hazard identification, risk assessment and control to effectively manage hazards
More informationNotes. Material 1. Portable Ground Fault Interrupter 2. PPE (safety glasses, gloves, other) 3. Circuit Tester
OSHA's electrical standards include: 29 CFR 1910 Electrical Subpart S, 1994 revision 29 CFR 1910.147 - Control of Hazardous Energy (Lockout/ tagout) 29 CFR 1910.137 - Personal Protective Equipment Standard,
More informationElectrical Hazards. Power Tools. Extension Cords
Electrical Hazards Electrical hazards can be found in nearly every roofing work site. Whether the hazard is posed by worn or damaged power tools or cords, improperly grounded tools or equipment, or the
More information!!! SAFETY!MANUAL/PROGRAM!! FOR!!! MERIT!ELECTRIC!COMPANY,!LTD.!!!!!!!!!
SAFETYMANUAL/PROGRAM FOR MERITELECTRICCOMPANY,LTD. 1 TABLEOFCONTENTS A. POLICYSTATEMENT B. EMERGENCYACTIONPLAN/INJURYHANDLING C. SAFETYRESPONSIBILITIES D. DISCIPLINARYPOLICY E. MINIMUMSAFETYRULES F. SAFETYINSPECTION
More informationEnforcement Policy Statement
Introduction The Health and Safety s (HSE s) aims are to protect the health, safety and welfare of people at work, and to safeguard others, mainly members of the public, who may be exposed to risks from
More informationSME BUSINESS INSURANCE MADE SIMPLE
SME BUSINESS INSURANCE MADE SIMPLE Working with the profession to simplify the language of insurance PUTTING INSURANCE TO WORK Business insurance is about protecting your livelihood. For SMEs in particular,
More information