Autodesk Moldflow Communicator System Requirements

Transcription

1 Autodesk Moldflow Communicator 2016 System Requirements

2 Autodesk Moldflow Communicator 2015 Autodesk, Inc. All Rights Reserved. Except where otherwise noted, this work is licensed under a Creative Commons Attribution- NonCommercial-ShareAlike 3.0 Unported License. Please see the Autodesk Creative Commons FAQ for more information. Certain materials included in this publication are reprinted with the permission of the copyright holder. Trademarks The following are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and other countries: 123D, 3ds Max, Alias, ATC, AutoCAD LT, AutoCAD, Autodesk, the Autodesk logo, Autodesk 123D, Autodesk Homestyler, Autodesk Inventor, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSketch, AutoSnap, AutoTrack, Backburner, Backdraft, Beast, BIM 360, Burn, Buzzsaw, CADmep, CAiCE, CAMduct, Civil 3D, Combustion, Communication Specification, Configurator 360, Constructware, Content Explorer, Creative Bridge, Dancing Baby (image), DesignCenter, DesignKids, DesignStudio, Discreet, DWF, DWG, DWG (design/logo), DWG Extreme, DWG TrueConvert, DWG TrueView, DWGX, DXF, Ecotect, ESTmep, Evolver, FABmep, Face Robot, FBX, Fempro, Fire, Flame, Flare, Flint, ForceEffect, FormIt, Freewheel, Fusion 360, Glue, Green Building Studio, Heidi, Homestyler, HumanIK, i-drop, ImageModeler, Incinerator, Inferno, InfraWorks, InfraWorks 360, Instructables, Instructables (stylized robot design/logo), Inventor, Inventor HSM, Inventor LT, Lustre, Maya, Maya LT, MIMI, Mockup 360, Moldflow Plastics Advisers, Moldflow Plastics Insight, Moldflow, Moondust, MotionBuilder, Movimento, MPA (design/logo), MPA, MPI (design/logo), MPX (design/logo), MPX, Mudbox, Navisworks, ObjectARX, ObjectDBX, Opticore, Pixlr, Pixlr-o-matic, Productstream, Publisher 360, RasterDWG, RealDWG, ReCap, ReCap 360, Remote, Revit LT, Revit, RiverCAD, Robot, Scaleform, Showcase, Showcase 360, SketchBook, Smoke, Socialcam, Softimage, Sparks, SteeringWheels, Stitcher, Stone, StormNET, TinkerBox, ToolClip, Topobase, Toxik, TrustedDWG, T-Splines, ViewCube, Visual LISP, Visual, VRED, Wire, Wiretap, WiretapCentral, XSI. All other brand names, product names or trademarks belong to their respective holders. Disclaimer THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY AUTODESK, INC. "AS IS." AUTODESK, INC. DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS.

3 Contents Chapter 1 Supported Platforms System specifications for Windows platforms Chapter 2 Disk space requirements Chapter 3 Graphics requirements iii

4 iv

5 Supported Platforms 1 Supported Windows platforms Operating System Service Pack Windows 8 or 8.1 (64-bit edition) Windows 8 Windows 8 Pro Windows 8 Enterprise Windows 7 (64-bit edition) Windows 7 Professional Windows 7 Enterprise Windows 7 Ultimate SP1 or later System specifications for Windows platforms Minimum and recommended hardware and software specifications for Windows platforms System component Recommended CPU speed 2 GHz or higher Main memory (RAM) 8 GB or higher Virtual memory/swap space 4 GB or higher 1

6 System component Recommended Disk space 12 GB or higher for free disk space (at least 2GB free disk space for installation) Web browser Internet Explorer 9.0 or later NOTE Autodesk Moldflow2016 products are supported on 64-bit Windows operating systems only. Third-party software The help system requires Microsoft Internet Explorer 9.0 or later. All updated web browsers, including Google Chrome, Firefox, Safari, and Opera are also supported. 2 Chapter 1 Supported Platforms

7 Disk space requirements 2 Installation disk space requirements Software installed Installed size on disk (approximate) Autodesk Moldflow Communicator 1.0 GB NOTE During the installation process you will require approximately twice the amount of disk space as specified above. 3

8 4

9 Graphics requirements 3 The graphic requirements listed here reflect the minimum required to obtain acceptable simulations. 512 MB DRAM or higher, OpenGL-capable graphics card. Ensure you have installed the latest driver for your card. Please refer to the card manufacturer's website for drivers and instructions. 24-bit color setting at or higher screen resolution. NOTE Autodesk does not guarantee the use of any particular graphics card. Autodesk will make every effort to work with card manufacturers to resolve any problems that may arise in the use of our software with a particular card. However, we cannot guarantee that all graphics-related issues can be fixed, as they may lie within the card manufacturer's drivers rather than Autodesk software. Recommended The software makes extensive use of OpenGL and texture mapping, therefore any device offering OpenGL acceleration and texture memory will give improved performance. Unsupported graphics cards Use of the following graphics card and drivers will potentially cause your computer to lock up. Graphics Card Driver Geforce GT desktop-win8-win7-winvista-64bit-englishwhql desktop-win8-win7-winvista-64bit-englishwhql 5

10 Graphics Card Driver desktop-win8-win7-winvista-64bit-englishwhql This card, in conjunction with these drivers, is not supported for use with Autodesk Moldflow products and should not be used, to avoid potential problems. 6 Chapter 3 Graphics requirements