CERTIFICATE OF ANALYSIS COA

REGISTRATION DOCUMENT

2014 REGISTRATION DOCUMENT CONTENTS INTERVIEW WITH JEAN-DOMINIQUE SENARD 2 1 Michelin at a Glance 5 1.1 Company Profile 6 1.2 Summary Organization Chart 7 1.3 History and Development of the Company 8 1.4

NKE Group. Committed to Excellence... since YEARS

LEAR Corporation Sweden. Odette Transport Label Guideline Vers. 1 Rev. 4

LEAR Corporation Sweden Odette Transport Label Guideline Vers. 1 Rev. 4 Contents 1. Introduction... 3 2. Paper, Size and Materials... 4 3. Printers and Software... 5 4. Data Area Layout... 6 4.1 Data Area

If brokers wish Xchanging to group delinked transactions the LPAN(s) must be marked Grouped or Please Group.

PREMIUM SUBMISSIONS 1. General These instructions apply to all premium submissions (excluding proportional treaty accounts) to Xchanging. All premium entries submitted, including FDOs, must be accompanied

REFERENTIEL- SODERN. Autre référence / Other reference :

Classification: NC Page : 1/8 Autre référence / Other reference : Type: Sector procedureprocédure sectorielle. Description: Exigences qualité pour les fournisseurs de Sodern version anglaise / Quality

Core Fittings C-Core and CD-Core Fittings

F o r e i g n p a y m e n t i n P o l a n d Page 1 of 6 B u s i n e s s O n l i n e

F o r e i g n p a y m e n t i n P o l a n d Page 1 of 6 Version 2 Change log Version Date Change 1 2013-10-07 Document created 2 2015-01-09 Field :57D: updated with bank codes (e.g FedWire routing No.

UNICEF s Quality Assurance System for Procurement of Micronutrient Powders (MNP)

UNICEF s Quality Assurance System for Procurement of Micronutrient Powders (MNP) Nutrition Supplier Meeting, June 30, 2015 Dimitris Catsoulacos Quality Assurance Specialist PRESENTATION OVERVIEW Quality

Expansion Joint Installation Services. Supply and Installation by Frenzelit.

Expansion Joint Installation Services. Supply and Installation by Frenzelit. GASKETS TECHNICAL TEXTILES EXPANSION JOINTS INSULATION NEW MATERIALS Installation Services: economic solutions from a single

Steel procurement in major projects: Guidance on the application of social issues. Purpose

Steel procurement in major projects: Guidance on the application of social issues Purpose 1. This is a practical guide on how to incorporate social issues in major projects with a significant steel component.

http://www.guido.be/intranet/enqueteoverview/tabid/152/ctl/eresults...

1 van 70 20/03/2014 11:55 EnqueteDescription 2 van 70 20/03/2014 11:55 3 van 70 20/03/2014 11:55 4 van 70 20/03/2014 11:55 5 van 70 20/03/2014 11:55 6 van 70 20/03/2014 11:55 7 van 70 20/03/2014 11:55

The Composition of a Tyre: Typical Components

Creating markets for recycled resources The Composition of a Tyre: Typical Components Report Project code: TYR0009-02 Date of commencement of research: 15 November 2005 Finish date: 27 February 2006 Written

Label Standard for Incoming Parts

Label Standard for Incoming Parts VSP Label Standard for Incoming Parts v6.docx Page 1 of 10 Table of Contents 1 Introduction...4 1.1 Purpose...4 1.2 Scope...4 1.3 Sample Label Approval...4 2 General Label

FSpec211. Royal Mail Tracked Next Day. COSS Specification. Royal Mail Customer Solutions

FSpec211 Royal Mail Customer Solutions Royal Mail Tracked Next Day COSS Specification The FSpec211 document details, for customers, the various outputs required to access Royal Mail Tracked Next Day It

Tire Basics: What Drivers Should Know About Tires

Tire Basics: What Drivers Should Know About Tires 1. The Function of Tires Today s passenger-vehicle and light-truck tires contain over 200 separate materials and are engineered to deliver a varying combination

A Guide to Accounts Payable Supplier Processes

A Guide to Accounts Payable Supplier Processes The Johnson & Johnson Family of Companies believe in the benefits associated with the efficiencies gained through methods of electronic or paperless invoicing.

Office of the Chief Procurement Officer Page 1 BID NUMBER RT24-2016

Office of the Chief Procurement Officer Page 1 ITEM RT24-01-001 DESCRIPTION Bowl, kidney dish and measuring jug Bowl Medical Stainless steel To comply to the latest issue of SANS 417, subsection 4 and

Sumitomo Electric Wiring Systems, Inc. Part Identification and Labeling Requirements

1.0 INTRODUCTION These specifications provide guidelines for printing and applying a Shipping/Parts Identification label. Note: In this document, the word must indicates a requirement and the word should

Chemical Compliance the Bill Of Material Approach (Compliance is mandatory testing is not)

Contents Chemical Compliance the Bill Of Material Approach (Compliance is mandatory testing is not) Introduction Declaration of Conformity Bill of Materials Using the BOM Chemical Management Systems Appendices

Non- Carbon Fiber Electrical Heating Textile Introduction:

Non- Carbon Fiber Electrical Heating Introduction: This Heating is a new generation electrical heating system which is specially designed for mobile heating, energy saving and safety orientated requirements

NDS Environment - A Tour of France

FRENCH EXPERIENCE WITH NDS EIGHTH NDS USERS GROUP MEETING MEXICO 7-9 OCTOBER 2013 Aldine Fabreguettes The French National Agency for Medicines and Health Products Safety Narcotics and Psychotropics Department

SILVERCORP INTERCEPTS 18.8 METRES TRUE WIDTH GRADING 368 G/T SILVER AND 1.78 PERCENT LEAD AT THE LM MINE WEST, YING MINING DISTRICT, CHINA

NEWS RELEASE Trading Symbol: TSX: SVM NYSE: SVM SILVERCORP INTERCEPTS 18.8 METRES TRUE WIDTH GRADING 368 G/T SILVER AND 1.78 PERCENT LEAD AT THE LM MINE WEST, YING MINING DISTRICT, CHINA VANCOUVER, British

AVAILABLE SPACE COLLIERS STEEL BUILDING

AVAILABLE SPACE COLLIERS STEEL BUILDING LOCATION Building Address - RR 2 Box 450 Located in City Limits - Yes County - Brooke Located in Business/Industrial Park - No Can the Building be Multi-Tenant -

JST Specification QUALITY GUIDELINES RECEIPT CONFIRMATION

Page 1 of 21 RECEIPT CONFIRMATION SUPPLIER OR COMPANY NAME Name and address of site No. 1 Name and address of site No. 2 NAME: POSITION OR TITLE: DATE: Certifies having received and accepted these Quality

SUPPLIER QUALITY MANAGEMENT SYSTEM QUESTIONNAIRE

Company Name Street Address City, State, Zip code Phone Number Fax Company Website Email Address ORGANIZATION NAME PHONE NUMBER EMAIL ADDRESS President/CEO General Manager Engineering Manager Production

Drain & Sewer. Cleaning. Drain and Sewer cleaning Fluid transfer solutions www.trelleborg.com/industrialhose TRELLEBORG FLUID HANDLING SOLUTIONS

Drain & Sewer Cleaning Drain and Sewer cleaning Fluid transfer solutions www.trelleborg.com/industrialhose TRELLEBORG FLUID HANDLING SOLUTIONS Trelleborg Fluid Handling Solutions Trelleborg Fluid Handling

DEFINITIONS. Supply Chain Improvement Program Goals:

Routine HDX4-51-110 1/8 PURPOSE The purpose of this document is to define the Haldex Supply Chain Improvement Program (SCIP) and associated requirements. SCIP is a tool to monitor and improve the quality

1. Technical Offer Submission Sheet

8. Sample Forms SUMMARY Sample Form No. 1: 1. TECHNICAL OFFER SUBMISSION SHEET... 3 Sample Form No. 2: 2. PRICE OFFER SUBMISSION SHEET... 5 Sample Form No. 3: 3. BID SECURITY... 6 Sample Form No. 4: 4.

Delivery specification Labelling of components and products

Delivery specification Labelling of components and products Author(s) Dominik Halbeisen, KSCMLOG Status Approved Created on 30.09.2015 Version 2.0 Change control Version Date Name Comments V 2.0 30.09.2015

Bankline internet banking import file layout user guide

Bankline internet banking import file layout user guide Bankline internet banking import file layout user guide 2 Contents 1. Introduction to Bankline import...3 1.1 What is Bankline import?...3 1.2 How

Maximum Length = 4 lines of text, (10 or 8 Points or 6 or 7 LPB). Width of block no larger than 1.75 inches. Page 1 of 9

Supplier Compliance Container (B-10) Label (4 x 6 ) Specification Sheet For additional detail, refer to AIAG B-10 Guidelines June 2004. For Code 128, refer to Page 3 of this document. Part Number Block

B i o s o l u t i o n s

B i o s o l u t i o n s Implementation of pharmatracker TM : A case study Prepared by Ocimum Biosolutions Ocimumbio Solutions August 2006 All rights reserved. 2 B i o s o l u t i o n s an ISO 9001:2000

Supplier Quality Requirements and Clauses

Supplier Quality Requirements and Clauses Supplier Quality Requirements General The following Quality Notes (QN01 through QN19) apply to and form a part of all Purchase Orders issued by Advanced Conversion

International Local Currency Payments: Alternative to USD Payments

UK Version International Local Currency Payments: Alternative to USD Payments Paying international suppliers in US dollars is not the only option and, in many cases, may not be the best option. The dollar

TABLE OF CONTENTS. Business ebanking - Alerts Set Up

TABLE OF CONTENTS About Alerts... 2 Reading Received Alert Messages... 2 Subscribing to Account and Non-account Alerts... 3 Subscribing to Custom Alerts... 4 Changing Alert Subscriptions... 5 Deleting

Barcoding in pharmaceutical inventory management Botswana experience

Barcoding in pharmaceutical inventory management Botswana experience TechNet Meeting, 5-7 February 2013, Dakar, Senegal Muhammad Farooq Chohan Manager Central Medical Stores Presentation Outline Country

SAP Business One Integration with Radley icaras EDI. Mascidon, LLC March, 2011 Dr. Don Maes 248-568-0418

SAP Business One Integration with Radley icaras EDI Mascidon, LLC March, 2011 Dr. Don Maes 248-568-0418 Table of Contents SAP B1 Integration to icaras... 4 Figure 1.1 SAP Integration Points... 4 Figure

Chain of Custody of Forest Based Products - Requirements

PEFC INTERNATIONAL STANDARD Requirements for PEFC scheme users PEFC ST 2002:2013 2012-12-04 Enquiry Draft Chain of Custody of Forest Based Products - Requirements PEFC Council World Trade Center 1, 10

Because sustainability matters

Because sustainability matters 1992 Mike Biddle begins work on plastics separation Richmond, CA - USA 2002 Edison Award for Innovation 2005 Our aim is to be the leading global plastics recycling company

Environmental Product Declaration. Registration number: S-P-00047. Rev. 0 11/06/03. Tmax T1. Low voltage circuit breaker.

Environmental Product Declaration Registration number: S-P-00047 Rev. 0 11/06/03 Tmax T1 Low voltage circuit breaker ABB SACE SpA Information about the company and the product This document aims to provide

Financial ACH and Positive Payment -

Financial ACH and Positive Payment - Thomas Peterson - IFS NA Senior Advisor Financials IFS CUSTOMER SUMMIT 2011, CHICAGO Supplier ACH Payments and Positive Payment - This hands on workshop will teach

ERP project secures jobs at make-to-order manufacturer

USER REPORT MECHANICAL ENGINEERING abas ERP ERP project secures jobs at make-to-order manufacturer User report STOPA Anlagenbau GmbH & Co. KG ERP PPC MRP ebusiness Industry make-to-order manufacturing

INTERNATIONAL SALE CONTRACT TEMPLATE INTERNATIONAL SALE CONTRACT

INTERNATIONAL SALE CONTRACT TEMPLATE Download International Sale Contract sample in Word format. Fill in the blanks and choose the terms of this international agreement that best suit your needs. The Contract

BETTER SOFTWARE FOR BETTER BUSINESS. www.optosoftware.com.au

BETTER SOFTWARE FOR BETTER BUSINESS www.optosoftware.com.au WHAT IS OPTO SOFTWARE? Opto Software gives small and medium-sized manufacturers the power to streamline processes and manage production with

CENTRAL SUSQUEHANNA INTERMEDIATE UNIT Application: Fund Accounting

CENTRAL SUSQUEHANNA INTERMEDIATE UNIT Application: Fund Accounting Fund Accounting Manual Check Worksheet Learning Guide 2010 Central Susquehanna Intermediate Unit, USA Table of Contents Introduction...1

KEBA 2014 We reserve the right to make technical modifications. No liability accepted for information provided. All rights reserved.

Supplier Handbook Contact address KEBA AG Headquarters, Gewerbepark Urfahr, A-4041 Linz phone: +43 732 7090-0, fax: +43 732 730910, e-mail: [email protected], www.keba.com KEBA Group worldwide Austria Germany

CERTIFIED TRANSLATION FROM POLISH INTO ENGLISH DECISION 2483 OS/2008. of the law as of 27 April 2001 Environment Protection Law (uniform text,

CERTIFIED TRANSLATION FROM POLISH INTO ENGLISH Częstochowa, 19 September 2008 OS.Cz.WG76360/3/3/08 against delivery confirmation DECISION 2483 OS/2008 On the basis of art. 155 pd the Administrative Proceedings

PRELIMINARY STEEL IMPORTS INCREASE 17% IN JANUARY Import Market Share 32% in January

News Release FOR IMMEDIATE RELEASE February 25, 2015 CONTACT: Lisa Harrison 202.452.7115/ [email protected] PRELIMINARY STEEL IMPORTS INCREASE 17% IN JANUARY Import Market Share 32% in January Washington,

SUPPLIER CONNECTION SUPPLIER REFERENCE GUIDE FOR GM SUPPLIERS

SUPPLIER CONNECTION SUPPLIER REFERENCE GUIDE FOR GM SUPPLIERS T ABLE OF C ONTENTS Table of Contents... 1 Introduction... 2 Target Audience... 2 Objectives... 2 Other Resources... 2 Prerequisites... 3 Verify

Century Fasteners & Machine Co., INC. /CFMC PURCHASE ORDER

Century Fasteners & Machine Co., INC. /CFMC PURCHASE ORDER CONDITIONS AND INSTRUCTIONS A HARDCOPY OF THIS DOCUMENT MAY NOT BE THE DOCUMENT IN EFFECT. SEE CFMC DOCUMENT LIBRARY FOR CURRENT REVISION. 1.

LM Wind Power Group - Strategic SWOT Analysis Review

Brochure More information from http://www.researchandmarkets.com/reports/1495593/ Description: Summary LM Wind Power Group (LM Wind Power), formerly known as LM Glasfiber Holding A/S, is a global components

SILVERCORP REPORTS RESULTS FROM ITS 2012 EXPLORATION PROGRAM AT THE SGX MINE, YING MINING DISTRICT, CHINA

NEWS RELEASE Trading Symbol: TSX: SVM NYSE: SVM SILVERCORP REPORTS RESULTS FROM ITS 2012 EXPLORATION PROGRAM AT THE SGX MINE, YING MINING DISTRICT, CHINA VANCOUVER, British Columbia June 4, 2013 Silvercorp

International Purchasing Office (IPO) and Global Sourcing. Marco Sartor University of Udine

International Purchasing Office (IPO) and Global Sourcing Marco Sartor University of Udine 1 INTRODUCTION IPO definition An IPO can be defined as an offshore buying office or buying house set up to procure

NAS: A REFERENCE IN THE STAINLESS STEEL INDUSTRY

NAS: A REFERENCE IN THE STAINLESS STEEL INDUSTRY Cristobal Fuentes CEO of NAS Investor and Analyst s Day London, 8 th November 2011 Table of Contents I. Company Overview II. Raw Materials III. Integrated

Chapter 4. Completing the accounting cycle. Appendix 4A: Reversing entries

1 Chapter 4 Completing the accounting cycle Appendix 4A: Reversing entries 2 Learning objective 1. Prepare reversing entries and describe their purpose 3 Reversing entries Reversing entries are optional

Should Costing Version 1.1

Should Costing Identify should cost elements early in the design phase, and enable cost down initiatives Version 1.1 August, 2010 WHITE PAPER Copyright Notice Geometric Limited. All rights reserved. No

FTP FILENAMING STANDARD Issue 4

Jointly with Book Industry Study Group (US) and Book Industry Communication (UK) FTP FILENAMING STANDARD Issue 4 Changes from Issue 3 are shown in red. BACKGROUND AND PRINCIPLES 1. The purpose of these

Vandal-proof keypad series

Model No. LBKP35900 / LBKP35900E (Encryption available) Interface: PS2, USB available. Dimensions: 100mm x 91.5mm No. of keys: 16 keys, high quality stainless steel G.W.: 0.75kg. All languages version

INTERNATIONAL SUPPLY CONTRACT TEMPLATE

INTERNATIONAL SUPPLY CONTRACT TEMPLATE Download International Supply Contract sample in Word format. Fill in the blanks and choose the terms of this international agreement that best suit your needs. DATE:...

Project Management And Installations

Project Management And Installations The Mono Projects Team Overview For over 70 years, Mono has been successful in manufacturing and supplying pumping, grinding, screening and packaged pumping systems

Xinyu Iron & Steel Co., Ltd. (600782) - Financial and Strategic SWOT Analysis Review

Xinyu Iron & Steel Co., Ltd. (600782) - Financial and Strategic SWOT Analysis Review Xinyu Iron & Steel Co., Ltd. (600782) - Financial and Strategic SWOT Analysis Review Sector Publishing Intelligence

Highlights of selected high-grade mineralized zones exposed in drift tunnels include:

NEWS RELEASE Trading Symbol: TSX: SVM SILVERCORP REPORTS NEWLY EXPOSED MINERALIZATION AT THE TLP MINE FROM ITS 2015 EXPLORATION TUNNELING PROGRAM - 1,414 METERS IN TOTAL LENGTH AND 0.70 METERS IN AVERAGE

International ACH Transactions (IAT) Frequently Asked Questions Corporate Customers. Contents

International ACH Transactions (IAT) Frequently Asked Questions Corporate Customers IAT changes were made for regulatory compliance The first step is to understand and recognize OFAC requirements - corporates

Chapter 7. Banner Introduction... 7-3. Menu Navigation Tables... 7-4. Automated Clearing House Forms... 7-5

Chapter 7 Automated Clearing House Banner Introduction......... 7-3 7 Automated Clearing House Standards. 7-3 National Automated Clearing House Association Standards. 7-3 Canadian Payment Association Standards..........

Request for Quotation

City of Richmond Business and Financial Services Department Request for Quotation Bidders are requested to respond to this Quotation call as instructed subject to the provisions contained herein. Name

Business System Software

Business System Software BUSINESS SYSTEM SOFTWARE For Custom Product Manufacturing Engineering Fabrication & Jobbing Food & Chemical Process Industries Distribution & Wholesale Sales, Service & Repair

Client Time Analysis Dashboard Users Guide

Client Time Analysis Dashboard Users Guide Updated 3/5/11 Page 1 of 5 Client Time Analysis Dashboard The Client Time Analysis Dashboards provide an interactive view of client hours and dollars posted for

GE Power Electronics Business Total Quality Management for Suppliers

GE Power Electronics Business Total Quality Author: Reviewers: Contributors: Alessandro A. Cervone Technical Manager Component & Reliability Engineering Alicia Scott Title Erika Nannis Title Robert Roessler

A Users Guide to the recast Late Payment Directive

DIRECTIVE 2011/7/EU ON COMBATING LATE PAYMENT IN COMMERCIAL TRANSACTIONS A Users Guide to the recast Late Payment Directive OCTOBER 2014) Contents Contents.2 Summary...3 Summary of new measures 4 What

CHAPTER 9: ACCOUNTS PAYABLE SETUP

Chapter 9: Accounts Payable Setup CHAPTER 9: ACCOUNTS PAYABLE SETUP Objectives Introduction The objectives are: Create a payment schedule. Create terms of payment. Create a payment day. Set up a cash discount.

Taulia Supplier Portal User Guide

Taulia Supplier Portal User Guide Version 2.1 Taulia Inc. Taulia GmbH 201 Mission Street, Ste. 900 Gladbacher Strasse 74 San Francisco, CA 94105 Phone +1 (415) 376 8280 40219 Düsseldorf Germany Fax +1

France-Paris: Security systems and services 2014/S 155-277639. Contract notice. Services

1/5 This notice in TED website: http://ted.europa.eu/udl?uri=ted:notice:277639-2014:text:en:html France-Paris: Security systems and services 2014/S 155-277639 Contract notice Services Directive 2004/18/EC

Business Document Specification Issue date: 2011-03-01 Version: 1.61 Invoice 20.1.6 Belonging message specification: MS 35

This business document is used when invoicing delivered and returned trade items. One invoice corresponds to one delivery or one return. The transaction is also used when crediting. If a calloff has been

Certificate of Registration

Certificate of Registration QUALITY MANAGEMENT SYSTEM - ISO 13485:2003 & EN ISO 13485:2012 This is to certify that: Sterigenics International, LLC 2015 Spring Road Suite 650 Oak Brook 60523 Holds Certificate

Volvo Car Corporation Application Of Odette / Transport Label

Volvo Car Corporation Application Of Odette / Transport Label TRANSPORT LABEL Version 1 Revision 5 9805 (2007-04-11) Volvo Car Corporation Dept 82300 S-405 31 GOTHENBURG Contents 1. Introduction...3 2.

S.2.2 CHARACTER SETS AND SERVICE STRING ADVICE: THE UNA SEGMENT

S.2 STRUCTURE OF AN EDIFACT TRANSMISSION This section is substantially based on the ISO 9735 document: EDIFACT application level syntax rules, first released on 1988-07-15, amended and reprinted on 1990-11-01,

Securities Identifiers Capital Markets (From 4 day workshop) Khader Shaik

Securities Identifiers Capital Markets (From 4 day workshop) Khader Shaik 1 Financial Markets A marketplace where financial products are bought and sold Financial Products Securities Stocks, bonds Currencies

Construction Contractors

16 Construction Contractors Chapter 16 Construction Contractors A. General Information A construction contractor is the user or consumer of everything he buys. A construction contractor is a person or

Indirect trade in steel. Definitions, methodology and applications

Indirect trade in steel Definitions, methodology and applications April 2012 Indirect trade in steel: definitions, methodology and applications A working paper issued by the World Steel Association (worldsteel)

Strategic Planning Presentation Enterprise Ireland Finance 4 Growth seminar, Cork, 10 th March 2015

Strategic Planning Presentation Enterprise Ireland Finance 4 Growth seminar, Cork, 10 th March 2015 Company Overview HQ in Cork with distribution hubs in Dublin & UK. 3 Divisions Chemicals, Paint and Food

Accounts Receivable Module Customer Invoice

Accounts Receivable Module Customer Invoice Contents Overview... 1 Document Layout... 2 Organization Tab... 3 Recurrence Details Tab... 3 General Tab... 4 Customer Information Section... 4 Detail Information

Format description of MT103 (Multicash PLA) foreign payment file.

Format description of MT103 (Multicash PLA) foreign payment file. 1 General information about MT103 file This document explains formats of MT103 file - used to import International / Foreign Currency Order

Whitepaper: Plastic Injection Molding and the Challenge of Color Consistency. Authors: Ken Adams & Patrick Neikes

Whitepaper: Plastic Injection Molding and the Challenge of Color Consistency Authors: Ken Adams & Patrick Neikes Abstract: Color consistency for injection molded parts poses a challenge. This becomes apparent

PRIVATE FOREIGN CURRENCY EXCHANGE AGREEMENT EUROS ( EUR) FOR US DOLLARS ($ USD) Bank to Bank SWIFT MT103

PRIVATE FOREIGN CURRENCY EXCHANGE AGREEMENT EUROS ( EUR) FOR US DOLLARS ($ USD) Bank to Bank SWIFT MT103 This private foreign exchange transaction agreement and the three (3) attached Annexes are entered

SWIFT MT940 MT942 formats for exporting data from OfficeNet Direct

SWIFT MT940 MT942 formats for exporting data from OfficeNet Direct January 2008 2008 All rights reserved. With the exception of the conditions specified in or based on the 1912 Copyright Act, no part of

Legrand's environmental commitments

VDI enclosure 128, Av. du Maréchal-de-Lattre-de-Tassigny 87045 Limoges cedex - France Tel: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 i Your usual Sales office Website: www.legrand.fr This document

ECOGI Pre-treatment of biomass for anaerobic digestion

ECOGI Pre-treatment of biomass for anaerobic digestion Mechanical pretreatment and separation of organic waste from households and industry to obtain a pulp for biogasification Verification Report J.no.