DYON LIVE. 1 Important Safety Instructions Conformity Mounting dismantling Stand mounting Wall mounting...

Transcription

1 V1.1.0 Content 1 Important Safety Instructions Conformity Mounting dismantling Stand mounting Wall mounting Front and Rear Panel Illustration Keyboard Rear connection board CI/CI+ Slot Remote Key Function Connecting to TV-Signal Input First Time Setup OSD Settings (Main Operations) CHANNEL MU PICTURE MU Sound Menu Time Menu Lock Menu Setup Menu Screen Menu Trouble shooting CI Information TELETEXT Function Keys Input Source Selection Connecting a USB Devices for playing media files Photo Menu Music Menu Movie Menu Text Menu Troubleshooting Specifications Glossary Warranty condition... 55

2 1 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, install in accordance with the instructions. 8) Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protected the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Unplug this apparatus during lighting storms or when unused for long periods of time. 13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14) Mains plug is used as the disconnect device, the disconnect device shall remain readily operable. 15) The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains, etc. 16) No naked flame sources, such as lighted candles, should be placed on the apparatus. 17) Attention should be drawn to the environmental aspects of battery disposal. 18) The use of apparatus in moderate climate. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. 2

3 The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit. The symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. The symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts. 3

4 Warning High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel. To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver. Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components. Caution Do not trap the power supply cord under the television receiver. Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it should fall. Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual, and damage to the television, may result if it should fall. When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet. If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat buildup can reduce the service life of your television, and can also be dangerous. 4

5 Tips regarding environmental protection At the end of its operating life, this product may not be disposed of by way of your normal household waste. Instead it must be delivered to a collection point for recycling electrical and electronic equipment. The icon on the product, in the operating instructions or on the packaging, indicates this. The materials used in manufacturing this product are recyclable, depending on their identifying markings. By recycling this equipment, by recycling its components, or through other procedures of re-using outdated equipment, you are making an important contribution to protection our environment. Please ask you local municipal administration for the location of the corresponding recycling point. Battery Recycling In order to ensure the environmentally friendly disposal of batteries, please do NOT dispose of used batteries through normal household waste. Please take the batteries to your local retail or community collection point for recycling. The following may be an indication of a discharged battery: The device cannot be switched on. The device switches off automatically and "Battery Empty" is shown in the display. The device and or battery do not function properly. Support URL: See our website for the latest information on this engine, on other products by our company and on our company itself. If you have questions or problems, please read the FAQs on our website or contact our customer support service support@dyon.eu. Manufacturer Axdia International GmbH Formerweg 9 D Willich (Germany) Tel: +49(0) 2154 / Fax: +49(0) 2154 / Support-Hotline: +49 (0)2154 / Web: info@axdia.de 5

6 Appropriate use The device is designed for receiving and watching unencrypted DVB-T and analogue Cable TV channels (free-to-air) for private use. It is exclusively meant for this purpose and must only be used for the same. This also includes paying attention to all information contained in this operating manual, especially in the safety instructions. Any other usage is considered to be improper and may lead to material damages and even personal injuries. Moreover, it will result in the immediate loss of guarantee. The manufacturer does not bear any liability for damages caused due to improper use. Caution The device turns off after 3 hours without pressing any key. Please note that this is NOT a defect. The device is designed like this. Please use the system settings to turn off this function if necessary. Please use the Pain Power key to turn the device off and on again for further use. 6

7 2 Conformity We, Axdia International GmbH, hereby declare that this device corresponds to the basic requirements and relevant regulations outlined in guidelines 2004/108/EC, 2006/95/EC and 2009/125/EC. The CE declaration of conformity for this product may be found on the following link: Service Downloads ( 7

8 3 Mounting dismantling 3.1 Stand mounting Use the screws to fix the stand. 8

9 3.2 Wall mounting Use the four thread on the back to connect the tv with your wall retainer. 9

10 4 Front and Rear Panel Illustration 4.1 Keyboard 1. Status indicator Green = Power on Red = Standby 2. Sensor Remote control sensor 3. SOURCE Display the input source menu you selected 4. MU Display main menu 5. VOL+ Increase sound level Move to the left in menu 6. VOL- Decrease sound level Move to the right in menu 7. CH+ In TV mode channel up Move up in menu 8. CH- In TV mode channel down Move down in menu 9. POWER Switch from or to Standby 10

11 4.2 Rear connection board Backside bottom: DYON LIVE 1. HEADPHONE OUT 2. VGA 3. SCART 4. PC AUDIO IN VGA 5. LNB IN 6. RF(C/T2) 7. COAXIAL 11

12 Backside right: 8. HDMI 9. USB 10. MINI AV 11. COMMON INTERFACE 12. MINI Ypbpr Note: According the CI Slot: Please take care to insert the CI-Module (CAM) in the correct way. The top side of the module must face against the wall behind. 12

13 4.3 CI/CI+ Slot This device is equipped with a CI+ slot for use with cam modules and smart cards which allow for the viewing of encrypted Pay-TV channels. The corresponding modules may be purchased from the Pay-TV provider or specialized dealer. Installation 1. Disconnect the TV set from power. 2. Before inserting the module into the device, insure that the smart card has been properly installed into the module ( ). Pay close attention to the direction when inserting. The printing on the module and the chip of the smart card must be on top. 3. Insert the Module with inserted smart card with the printing of the module facing backwards ( ). Insert the module carefully into the slot of the device until a little resistance is felt. Using a little pressure, carefully press the module into the slot until it sits firmly. 4. Reconnect the power source. Remove the module 1. Disconnect the TV set from power. 2. To take the module out carefully. 13

14 Notice Module and smart card are not including in the packaging. Install the CI+ module after the channel scan has been accomplished and all other settings have been set. The activation of the card may take several minutes for the first time it is used. When necessary, the device will check the module every time the device is switched on. Pay close attention to the manual of the CI+ module and smart card. Notice to CI+ Please note that the recording and time shift function may be limited on some channels. Recorded files of channels, which are encrypted by the CI+ card, are only workable on this device. These limitation are determined by the broadcaster. The manufacturer takes no responsibility. 14

15 4.4 Remote Key Function 1. POWER: to switch the set device to on or standby. 2. MUTE: To disable or enable the sound output. 3. MEDIA: Open Media Playback (USB) 4. SMODE: To change the sound setting 5. ASPECT: to switch the aspect ration 6. PMODE: Change image setting 7. NUMBER KEYS: used to select channel numbers or input numbers in menus. 8. LIST: Shows the channel list 9. RECALL: To show the last viewed channel 10. Display: Used to display information about the channel being viewed or further information about the program when in DTV mode. 11. REC: Start recording 12. AUTO: Auto adjust in PC mode 13. RED Colour key: In Menu: Menu function as displayed In TV mode: Teletext functions 14. BLUE Colour key In Menu: Menu function as displayed In TV mode: Teletext functions 15. GRE Colour key In Menu: Menu function as displayed In TV mode: Teletext functions 16. YELLOW Colour key In Menu: Menu function as displayed In TV mode: Teletext functions 17. SLEEP: Set timer to turn off the TV. 18. SOURCE: Select input source 19. OK: Used to confirm a selection within a menu. 20. ARROW KEYS: Move within the menus. 21. MU: Open the menu of the current title. 22. EXIT: In menu: Used to return to the previous screen or menu. 23. SUBTITLE: Used to switch among different subtitles that are broadcasted in DTV mode. 15

16 24. CH+/-: Channel selection 25. VOL+/-: Adjust the volume level. 26. T.SHIFT: Start / Stop time shift recording. 27. HOLD/ PLAY: TV mode: picture freeze USB mode: Play the media player 28. SIZE / TV Teletext mode: To change the view USB mode: Forward file playback 29. REVEAL / : TV Teletext mode: to show hidden information if existing. USB mode: Fast rewind for USB file playback 30. INDEX / STOP: TV Teletext mode: To open the Index page TV mode: To open the record settings USB mode: Stop for USB file playback 31. S.PAGE / : TV Teletext mode: To open a subpage if existing. USB mode: go to the next file 32. : USB mode: go to the previous file 33. TEXT: TV mode: to open teletext if teletext available in the broadcasted stream. 34. AUDIO: To change the audio track 35. FAV MU: TV mode: Used to access your favorite channels. 36. DTV: Switch to TV input directly 37. TV/RADIO: It is used to switch between digital TV channels and radio stations if existing. 38. EPG: TV mode: To display information about the program being viewed and what's on next. 16

17 Notes on batteries If the remote control is not used for a long period of time, please remove the battery from the compartment. Do not heat batteries or dispose of them in fires. Do not dismantle, deform or modify batteries. 17

18 4.5 Connecting to TV-Signal Input Connect the TV signal cable (the antenna cable, for example) to the Antenna Input Jack on the back of the unit so that you can receive television programmes. After connection, turn on the power of the unit. Then press the SOURCE button to select TV or DTV mode and conduct program selection. Note Whether and how many DVB-T channels can be received by this device, is strongly depending on the operational place, and the DVB-T signal strength in this Area. DVB-T radio in particular is very limited and not available in most locations. Please note that for using of DVB-T after each larger local changes, a new channel search should be accomplished. Since the frequency of the channels may vary from region to region. 18

19 5 First Time Setup You can choose language and country, auto turning programs. Go to Start Button and the channels will be searched. And after turning the screen will skip to the first DTV program. ( 1): Select the OSD menu language and press OK to confirm. ( 2): Select the country for DTV reception and press OK to confirm. The channel search starts now with DTV channel search. - Press Exit to exit the channel search. Note: The channel search can take a moment please be patient. 19

20 6 OSD Settings (Main Operations) Press / to select the page. Press / to select the setting CHANNEL MU The first item of the MU is channel menu (for TV or DTV source only). You can search channels and edit programs here. Press MU button to display the main menu. Press / button to select CHANNEL in the main menu. Press / button to select the option that you want to adjust in the CHANNEL menu. Press Enter button to adjust. After finishing your adjustment, press Enter button to save and return to the previous menu. 20

21 Note: All the channels including ATV, DTV and DTV Radio can be tuning by one time, if the Tune Type is DTV+ATV. All the stored channels will be deleted and overwritten after auto tuning. After auto tuning, the channel will skip to the first DTV channel. If there is no reception for more than 15 min, the TV will automatically switch to standby mode. Auto Tuning Press / button to select Auto Tuning, then press Enter/ button to the enter. 21

22 1) ATV Manual Tuning Current CH Set the channel number. Color System Select the color system (Available System: AUTO, PAL, SECAM) Sound System Select the Sound system Fine-Turn Adjust the frequency of the channel finely. Search Start searching channel. 22

23 2) DTV Manual tuning: You can select a DTV channel then find the programs in this channel. Please press / button to select DTV Manual Tuning, then press Enter button to enter sub-menu. Press / button to select channel, then press Enter button to search program. 3) Program edit: Press / button to select Program Edit, then press Enter button to enter sub-menu. 23

24 The three coloured key is the shortcut key for programming the channel. First press / to highlight the channel you want to select, then: Delete Move Skip Press red button, the program in cursor will delete. Press yellow button to move the channel in favourite list. Press blue button to skip the selected channel. Press Fav button to add or romote the channel to your favourite list. (Your TV set will skip the channel automatically when using CH+/- to view the channels.) 4) Schedule List Press / button to select Schedule List, then press Enter button to enter sub-menu. It is available in source. Press the YELLOW botton to enter the interface below. 24

25 When the time appointment is conflict, it will produce a warning message. Signal Information Press / button to select Signal Information, press the Enter button to see the detail information about the signal. Only available when there is signal in DTV. 25

26 6.1.2 PICTURE MU DYON LIVE The second item of the MU is PICTURE MU. You can adjust picture effect here, such as contrast, brightness, etc. Press MU botton to display the main menu. Press / button to select PICTURE in the main menu. Picture Mode Press / button to select Picture Mode, then press OK button to enter sub-menu. You can change the value of contrast, brightness, colour, sharpness and tint when the picture is in Personal mode. TIPS: You can press PMODE button to change the Picture Mode directly. Contrast/ Brightness/ Colour/ Tint/ Sharpness Press / button to select option, then press / button to adjust. 26

27 Contrast invariable. Adjust the highlight intensity of the picture, but the shadow of the picture is Brightness Adjust the optical fiber output of the entire picture, it will effect the dark region of the picture. Colour Adjust the saturation of the colour based on your own like. Tint Use in compensating colour changed with the transmission in the NTSC code. Sharpness Adjust the peaking in the detail of the picture. Color Temp Change the overall colour cast of the picture. Press / button to select Colour Temperature, then press OK button to enter sub-menu. Cold Normal Warm Increase the blue tone for the white. Increase the sex-linked colours for the white. Increase the red colour for the white. 27

28 Noise Reduction To filter out and reduces the image noise and improve picture quality. Press / button to select Noise Reduction, then press OK button to enter sub-menu. Off Low Middle High Default Select to turn off video noise detection. Detect and reduce low video noise. Detect and reduce moderate video noise. Detect and reduce enhanced video noise. Set as Default. 28

29 6.1.3 Sound Menu DYON LIVE The third item of the menu is the SOUND MU. Press MU button to display the main menu. Press / button to select SOUND in the main menu. 1. Press / button to select the option that you want to adjust in the SOUND menu. 2. Press Enter button to adjust. 3. After finishing your adjustment, Press Enter button to save and return to the previous menu. Sound Mode Press / button to select Sound Mode, then press Enter button to enter sub-menu. 29

30 Press / button to select. You can change the value of Treble and Bass when the sound is in Personal mode. TIP: You can press SMODE button on the remote control to change the Sound Mode directly. Standard Music Movie Sports Personal Produces a balanced sound in all environments. Preserves the original sound. Good for musical programs. Enhances treble and bass for a rich sound experience. Enhances vocals for sports. Select to customize picture settings. Note: The treble and bass are only available in User mode, you can adjust them as you like. Balance Press / button to select option, Press / button to adjust. Auto Volume level Press / button to select Auto Volume Level, then press / button to select On or Off. SPDIF Mode Press / button to select SPDIF Mode, then press / button to select Off/PCM/Auto. AD Switch Press / button to select AD Switch, then press / button to select On or Off. Amblyopia function for the blind, the tracks will be mixed describe the current screen. It need code stream to support. Note: Balance: This item can adjust the speaker's output; it enables you to listen to best at your position. Auto Volume: This item is used for reducing the difference between channel and program's volume automatically. 30

31 6.1.4 Time Menu DYON LIVE The fourth item of the menu is the TIME MU. Press MU button to display the main menu. Press / button to select TIME in the main menu. 1. Press / button to select the option that you want to adjust in the TIME menu. 2. Press Enter button to adjust. 3. After finishing your adjustment, Press Enter button to save and return to the previous menu. Time Zone Press / button to select Time Zone, then press Enter button to enter sub-menu. Press / / / button to select time zone. 31

32 Sleep Timer Press / button to select Sleep Timer, then press Enter button to enter sub-menu. Press / button to select select. (Available options are: Off, 10min, 20min, 30min, 60min, 90min, 120min, 180mm, 240min). Auto Standby Press / button to select Auto Standby, then press Enter button to enter sub-menu. Press / button to select select. Tips: The remote control does not make any operation in the hypothesis time, it will close down automatically. If you do any operation, it will reset the time. 32

33 OSD Timer Press / button to select OSD Timer, then press Enter button to enter sub-menu. Press / button to select. 33

34 6.1.5 Lock Menu DYON LIVE The fifth item of the menu is the LOCK MU. Press MU button to display the main menu. Press / button to select LOCK in the main menu. 1. Press / button to select the option that you want to adjust in the LOCK SYSTEM menu. 2. Press Enter/ / button to adjust. 3. After finishing your adjustment, press Enter button to return back to the previous menu. Lock System Press / button to select LOCK System, and then press Enter button to make the following 3 options valid. Default password is 0000, and if forget what you set, please call the service center. 34

35 Set Password Press / button to select Set Password, then press Enter button to enter sub-menu to set new password. Channel Lock Press / button to select Channel LOCK then press Enter button to enter sub-menu to select. Press green button to lock or unlock the channel. 35

36 Parental Guidance Press / button to select Parental Guidance, then press Enter button to enter sub-menu to select the number of age which is suitable for your children. Key Lock Press / button to select Key Lock, then press / button to select Off or On. When Key Lock's statue is on, you can't use the Key panel button. Hotel Mode 1. Press / button to the remote control to select hotel mode in the LOCK menu. 2. Press Enter button on the remote control to enter the sub-menu. 3. After finishing your adjustment, Press MU button to save and return back to the previous menu. 36

37 Hotel Mode Press / button to select Hotel Mode, then press / button to select on or off. Source Lock Press / button to select Source Lock, then press Enter button to enter sub-menu to select. Default Source Press / button to select Default Source, then press Enter button to enter sub-menu to select. Default Prog Press / button to select Default Prog, then press / button to adjust. It is available when the default source is TV. Max Volume Press / button to select Max Volume, then press / button to adjust. Clear Lock Press / button to select Clear Lock, then press Enter button to clear the setting you have done before. 37

38 6.1.6 Setup Menu DYON LIVE The sixth item of the menu is the SETUP MU. Press MU button to display the main menu. Press / button to select SETUP in the main menu. 1. Press / button to select the option that you want to adjust in the SETUP menu. 2. Press Enter button to adjust. 3. After finishing your adjustment, Press Enter button to save and return to the previous menu. OSD Language Select an OSD menu language can be displayed. Default English is selected as menu language. Press / / / button to select Menu Language. 38

39 TT Language Press / button to select TT Language, then press Enter button to enter sub-menu. Press / / / button to select TT Language. Audio Language Press / button to select Audio Languages, then press Enter button to enter sub-menu. Press / button to select the primary of Audio Languages. Press / / / button to select Audio Languages. Subtitle Language Press / button to select Subtitle Languages, then press Enter button to enter submenu. Press / button to select the primary of Subtitle Language. Press / / / button to select Subtitle Language. 39

40 Hearing Impaired Press / button to select Hearing Impaired, and then press Enter button to select On or Off. PVR File System Press / button to select PVR File System, then press Enter button to enter sub-menu. Press / button to select Check PVR File System, and then press Enter button to enter. Then it will check the USB speed. Aspect Ratio Press / button to select Aspect Ratio, then press Enter button to enter sub-menu. Press / button to select aspect ratio. (Available options are: Auto, 4:3, 16:9, Zoom1, Zoom2). 40

41 Blue Screen Press / button to select Blue Screen, then press Enter button to select On or Off. First Time Installation Press / button to select First time installation, then press Enter button to enter. Reset Press / button to select Reset, then press Enter button to enter sub-menu. Software Update (USB) Press / button to select Software Update (USB), plug your USB device in the USB slot, then press Enter button to update the right software. HDMI CEC Press / button to select HDMI CEC, then press Enter button to enter sub-menu. HDMI CEC HDMI ARC Auto Standby Device List Press / button to turn the HDMI CEC On or Off. Press / button to turn the HDMI ARC On or Off. Press / button to turn the Auto Standby On or Off. Press Enter button to open the main menu of device. 41

42 6.1.7 Screen Menu DYON LIVE Press MU button to display the main menu. Press / button to select SCRE in the main menu. 1. Press / button to select the option that you want to adjust in the SCRE menu. 2. Press Enter button to adjust. 3. After finishing your adjustment, Press Enter button to save and return to the previous menu. Auto Adjust Press Enter button to start adjusting H-Offset/V-Offset/Size/Phase automatically. H-Offset Adjust the horizontal position of the picture. Press / button to select H-Offset, then press Enter button to enter sub-menu. V-Offset Adjust the horizontal position of the picture. Press / button to select V-Offset, then press Enter button to enter sub-menu. Size Adjust the display size. Press / button to select Size, then press Enter button to enter sub-menu. Phase Adjust the horizontal interfering lines. Press / button to select Phase, then press Enter button to enter sub-menu. Position Reset Press / button to select Position Reset, then press Enter button to enter. 42 Note: 1. Noise Reduction in PICTURE option is invalid. 2. AD Swith in SOUND option is invalid. 3. TIME menu and description are the same as that for Air mode. 4. Block Program and Parental Guidance in LOCK option is invalid. 5. Audio Languages, Subtitle Language, Hearing Impaired and PVR File System in SETUP option is invalid. 6. PC mode has no CHANNEL menu.

43 6.2 Trouble shooting Trouble phenomenon Symptom Inspection Check Picture Audio antenna position, direction Snow Noise or connection Ghost Normal audio antenna position, direction or connection electronic equipment, car/ Interfere nce Noise motorcycle, fluorescent light Volume(check if mute is Normal Picture Mute activated or if the audio system connections are not correct) Power cord is not inserted Mute Power switch is not opened No picture Contrast and brightness/volume No colour Normal audio Colour control 43

44 6.3 CI Information The TV set contains a Common Interface CI+ Slot. Different CAM cards with smart card reader can be found at local dealers for different Pay- TV provider. Set in: Turn off the TV. Now insert the module. Remove: Turn off the TV. Now just unplug the module. If a Module is set in some more options are available at the CI Information page of the OSD. 1. Press the menu key to open the system settings. 2. Use the arrow keys to select CI Information and press OK to open the settings. Wait until the sub menu is leaded. 3. Use the arrow keys to select an option and press OK to change or open the selected function. 4. Press EXIT to store the changes and exit the menu. Certain menu options and settings are depend upon the corresponding CA module. The CA module (not included) is necessary when using a smart card (not included) to receive encrypted stations. Please insure that the CA module and smart card are compatible with each other. This device may use CI+ compatible modules. Which free to air stations and contents are available depends on the used CA Module and Smart Card. Please note that not all service contractors offer the essential CAM module required or may offer various other modules which may not be compatible. Please refer to you local dealer or contact the Hotline for more information concerning compatibility. 44

45 7 TELETEXT Function Keys Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language(cable networks, satellite channels, etc.) Press: You will obtain: This is used to call or exit teletext modes. The summary TTX appears with a list of items that can be accessed. Each item has a corresponding3 digit page number. If the channel selected does not broadcast teletext, theindication 100 will be displayed and the screen will remain blank (in this case, exit teletext and select another channel). SELECTING A Enter the number of the page required using the 0 to 9 up/down. Example: page 120, enter 120. The number is displayed top left, the counter turns and then the page is displayed. Repeat this operation to view another page. If the counter continues to search, this means that the page is not transmitted. Select another number. DIRECT Coloured are as are displayed at the bottom of the screen. The ACCESS TO 4 coloured keys are used to access the items or corresponding THEITEMS pages. The coloured areas flash when the item or the page is not yet available. INDEX This returns to the contents page (usually page 100). SUB PAGE Certain pages contain sub-pages which are automatically displayed successively. This key is used to stop or resume sub- page acquisition. The indication appears top left. HOLD To freeze the page. REVEAL To display or hide the concealed information (games solutions). LIST The user can set four favorite pages to be directly linked to the four color keys. While list mode is activated, it is not possibility to use TOP or FLOF navigation with the colorkeys. The favorite page numbers should be stored and restored to/from nonvolatile memory for each channel by the system software. 45

46 8 Input Source Selection The unit incorporates multiple video modes which can be selected via the Input button on the television or remote. Press the SOURCE button to enter Input menu. The screen will display as shown below: Use the / direction buttons and OK button On the input menu, press the / direction button to select the desired video mode, and press the OK button to enter the selected mode. Use the SOURCE button and OK button. On the input menu, press the SOURCE button to select the desired video mode, and press the OK button to enter the selected mode. 46

47 8.1 Connecting a USB Devices for playing media files The TV set has an USB Port to upgrade the software and playing media files. Note: 1. If possible, please connect USB devices directly to the Devices USB interface. If this is not possible, use only USB extension cables not exceeding 25 cm. 2. Before operating Media menu, Plug in USB device, then press INPUT button to set the Input Source to Media. Press / button to select Media in the Source menu, the press Enter button to enter. Press / button to select the option you want to adjust in the main Media menu, then press Enter button to enter. 47

48 8.2 Photo Menu DYON LIVE Press / button to select PHOTO in the main menu, then press Enter button to enter. Press Exit button to return to the previous menu and exit menu to quit. Press / button to select the file you want to watch in the file selecting menu, then press media button to display picture. When highlighting the option you select, the file information will appear on the right and picture will be previewed in the centre. 48

49 8.3 Music Menu DYON LIVE Press / button to select MUSIC in the main menu, then press Enter button to enter. Press Exit button to return to the previous menu and exit menu to quit. Press / button to select drive disk you want to watch, then press Enter button to enter. Press / button to select return option to the previous menu. 49

50 8.4 Movie Menu DYON LIVE Press / button to select MOVIE in the main menu, then press Enter button to enter. Press Exit button to return to the previous menu and exit menu to quit. Press / button to select drive disk you want to watch, then press Enter button to enter. Press media button to play the selected movie. Press display button to select menu in the bottom you want to run, then press Enter button to operate. Press Exit button to back to the previous menu and exit button to quit the entire menu. 50

51 8.5 Text Menu DYON LIVE Press / button to select drive disk you want to watch, then press Enter button to enter. Press / button to select return option to back to the previous menu. Press / button to select drive disk you want to watch, then press Enter button to enter. Press / button to select drive disk you want to watch, then press Enter button to enter. 51

52 9 Troubleshooting Problem Potential Reasons What to do No picture Power isn't connected Connect the power No sound from Speaker The power switch is not on No or incorrect connection with audio cable Switch on the power Connect the audio cable correctly Mute the sound Switch on the correct volume control Incorrect sound track Try another sound track Only sound, no image on the screen No or incorrect connection with AV cable The program is a radio program Connect the audio cable correctly Press <TV/RADIO> key to shift into TV mode Remote control unit is not workable The battery is exhausted Remote control unit is not Change new battery Adjust the way of holding in the right opposite of the front panel or too far from it remote control unit and near from the panel The image stop The signal is too weak Strengthen the signal suddenly or mosaic 52

53 10 Specifications ATV (PAL, SECAM) DTV (DVB-T/C/T2/S/S2) Reception range Input impedance Video System Sound System TELETEXT Max Storage Channels Reception range Input impedance Channel Bandwidth DVB-T *DVB-S/S2 Modulation *DVB-T2 DVB-C 48.25MHz ~ MHz 75Ω PAL, SECAM BG, DK, I, L/L' NICAM/A2 1000Pages 99CH VHF (50MHz ~ 230 MHz) UHF (474MHz ~ 862 MHz) 75Ω 7MHz/8MHz COFDM 2K/8K QPSK, 16QAM, 64QAM QPSK, 8PSK QPSK, 16QAM, 64QAM, 256QAM 16QAM, 32QAM, 64QAM, 128QAM, 256QAM Video System MPEG-2 MP@ML, MPEG-2 MP@HL, H.265 Sound System MPEG-1 layer 1/2, DD, DD+, AAC, HE-AAC Basic Functions EPG, Subtitle, LCN, TELETEXT(Europe), MHEG-5(UK) Common Interface Max Storage Channels Bulit-In 700CH(DVB-T+DVB-C, dynamic) 3500CH(DVB-S/S2, dynamic) * Specifications are subject to change without further notice. This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. 53

54 11 Glossary DiSEqC EPG RF connector FTA LNB Mute OSD PID Receiver SCART HDMI Y/PB/PR RGB HD Digital Satellite Equipment Control Digital system, with which the receiver can control different components of the external unit. It is especially used for selecting from multiple satellite positions (for example Astra and Eutelsat). Electronic Programme Guide Coaxial connector for LNB antenna cable. Free to air services Free of charge services that can be received without a special decoder. Low Noise Block Amplifier / Converter A device at the centre of the antenna, which converts high frequency incoming signals from satellites into a low frequency range and amplifies them simultaneously. Key of the remote control for turning off sound On screen display Menu control displayed on the screen. Identification number of a received data stream. The PIDs ensure that a channel is received completely. Receiver unit, which converts signals from the antenna into video and audio signals. A21 pole connector for connecting the TV set to the receiver. High Definition Multimedia Interface. A connector for connecting the TV set to the receiver and transmit picture and sound in HD quality. A connector for connecting the TV set to the receiver and transmit picture in high quality Separated colour information transmission (Red-Green-Blue) High Definition TV Manufacturer Axdia International GmbH Formerweg 9 D Willich (Germany) Tel: +49(0) 2154 / Fax: +49(0) 2154 / Web: Support hotline: +49 (0)2154 / info@axdia.de 54

55 12 Warranty condition The following conditions comprise the requirements and scope of our warranty conditions and do not affect our legal and contractual warranty obligations. We offer a warranty on our products in accordance with the following conditions: 1. DYON products are covered by a 24 month warranty. We will resolve damages or defects on DYON products free of charge within 12 months of the purchase date under the following warranty conditions. For any damage or defect determined later than 12 months after the purchase date, proof of a manufacturing fault must be submitted for repair under warranty. The warranty does not cover batteries and other parts, which are considered consumables, parts that break easily such as glass or plastic or defects based on normal wear and tear. There is no warranty obligation in the event of marginal differences compared to the target appearance and workmanship provided these have a negligible effect on the product's fitness for use, in the event of damage caused by chemical or electrochemical effects, by water or generally from abnormal conditions. 2. The warranty will be performed in such a way that we shall decide whether to repair the defective parts or to replace them with working parts free of charge. AXDIA reserves the right to exchange the product for a replacement product of equal value if the product that is sent in cannot be repaired within a reasonable time or at reasonable cost. The product can also be exchanged for a different model of the same value. Requests cannot be made for repairs to be carried out on site. Parts that have been replaced or exchanged become our property. 3. The warranty claim does not apply if repairs or other work is carried out by unauthorized persons or if our products are equipped with additional parts or accessories that are not approved for our products. 4. Warranties that have been activated do not cause the warranty period to be extended, nor do they trigger a new warranty period. The warranty period for any replacement parts installed ends with the warranty period for the entire product. 5. Any other or further claims are excluded, especially those for replacement due to damage caused outside of the product, provided there is no obligatory legal liability. We therefore accept no liability for accidental, indirect or other consequential damage of any kind, which leads to usage restrictions, data loss, loss of earnings or interruption to business. Asserting a warranty claim 1. To make use of the warranty service, you must contact the AXDIA Service Center by , fax or phone (see below for contact details). You can also use the service form on our website or on the back of the warranty conditions. 2. AXDIA Service Center will try to diagnose and solve your problem. If it is determined that a warranty claim exists, you will be given an RMA number (Return Material Authorization) and you will be asked to send the product to AXDIA. 55

56 IMPORTANT: AXDIA will only accept parcels that have an RMA number. Please observe the following when sending the product: 1. Send the product suitably packaged with carriage and insurance paid. Do not enclose any accessories with the products (no cables, CD's, memory cards, manuals, etc.), unless the AXDIA Service Centre specifies otherwise. 2. Mark the RMA number on the outside of the package in such a way that it is visible and clearly legible. 3. You must enclose a copy of the sales slip as proof of purchase. 4. Once AXDIA has received the product, it will meet its warranty obligations in accordance with the warranty conditions and will return the product to the sender with carriage and insurance paid. Service outside of warranty AXDIA can refuse any service claim made that is not covered by the warranty. If AXDIA agrees to provide a service outside the warranty, the customer will be invoiced for all repair and transport costs. AXDIA will not accept any packages that have not first been approved by AXDIA by means of an RMA (Return Material Authorization). 56