For Warranty Information and the most up-to-date version of this User s Guide, go to:

Transcription

1 Warranty For Warranty Information and the most up-to-date version of this User s Guide, go to: Contact Information Support: [email protected] Parts: [email protected] Phone Support: Website:

2 Warnings and Precautions WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture. WARNING: Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the surface. Use a protective barrier between the unit and surface to protect the surface. WARNING : Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable. Note : This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead after several attempts to charge, please contact for support. Never disassemble the unit or attempt to remove the battery as that could cause leakage of an electrolytic substance.

3 Pairing a Bluetooth Device 1. Turn on the unit using the Power switch. The Pairing/ Line In Indicator will flash blue quickly. 2. Press and hold the Pair button until a beep sounds. When pairing, remain within 3 feet of the unit. 3. Using the native controls on your Bluetooth device, select the ISB212 in your Bluetooth settings to pair. If your device requests a password, enter the default password Refer to the user s manual for your specific device for instructions on pairing and connecting Bluetooth devices. 4. When successfully paired and connected, the Pairing Indicator will display a solid blue light and a beep will sound from the unit. After initial pairing, the unit will stay paired unless unpaired manually by the user.

4 Playing Audio Wirelessly 1. Follow the instructions for Pairing a Bluetooth Device. 2. Use the native controls on the connected Bluetooth device to select a track. 3. To play, pause or skip the selected track, use the native controls on the connected Bluetooth device or press the Play/Pause button on the unit. 4. Audio played through the connected Bluetooth device will now be heard through the speakers. 5. Press and hold the Vol+/Vol- buttons to adjust the volume.

5 Using the 3.5mm Audio Input 1. Plug one end of a 3.5 mm audio input cable (not included) into the 3.5 mm Audio Input on the unit. The Pairing/Line In Indicator will display a green light. 2. Plug the other end of the cable into the audio output/ headphone output on an MP3 Player or other audio source. 3. Turn on the unit using the Power switch. 4. Audio played through the connected device will now be heard through the speakers. Note: Any audio being played through a connected Bluetooth Device will cease once the 3.5mm Audio source is connected.

6 USER S GUIDE V: ISB212 Portable Wireless Speaker For the most up-to-date version of this User s Guide, go to

7 International Support To download this User s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en www. iliveelectronics.com Pour télécharger ce guide de l utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique d assistance sur

8 Features Built-in Bluetooth speaker 3.5mm audio input DC battery power: built-in rechargeable lithium ion battery Battery life: ~2 hours Wireless range: 33 feet Can be paired up to 6 mobile or audio players Included Mini USB to USB charging cable

9 LINE IN BATT. LOW DC IN Power USB Power Requires a Mini USB to USB cable (included). Note: PC must not be in sleep mode. Status Indicator Power Off No light Charging Red light Fully Charged Green light Low battery Flashing red light

10 Introduction Pairing/Line In Indicator LINE IN / PAIR + Volume Press and hold to increase or decrease the volume. Play/Pause Press to play or pause.

11 POWER Introduction ON OFF Power Adjust the switch to turn the unit on or off. Always be sure to switch to the OFF position when not in use. PAIR Pair Press and hold to begin connecting a Bluetooth device.

12 LINE IN Introduction Line Input Charging Indicator BATT. LOW DC IN Mini USB Charging Port