GS1 128 SERIAL SHIPPING CONTAINER LABEL Companion Report

Size: px

Start display at page:

Download "GS1 128 SERIAL SHIPPING CONTAINER LABEL Companion Report"

Daniella Welch
9 years ago
Views:

1 GS1 128 SERIAL SHIPPING LABEL Companion Report Version: 1.00 Draft Author: Thomas A. Smith Company: Burlington Coat Factory Publication: 05/15/2013 Trading Partner: Notes:

2 05/15/2013 GS1-128 SERIAL SHIPPING LABEL Table of Contents SHIPPING LABEL REQUIREMENTS & EXAMPLES... 1 Basic Requirements:... 1 Shipping Labels... 1 Shipping Label Size... 1 Shipping Label Zones x6 Label Sample Zone Mapping x6 Label Sample Mapping to the EDI The 4x7 Label... 4 Shipping Label Zones... 4 Zone F The Shipper/Supplier Segment x7 Label Sample Zone Mapping x7 Label Sample Mapping to the EDI PART B: SHIPPING LABEL PLACEMENT... 7 Shipping Label Placement... 7 Side Labeling... 7 Other Notes and Comments:... 8 User Note : This Burlington Coat Factory EDI Specification Document was developed exclusively for technical development purposes as would be undertaken by a typical trading partner as part of their on boarding process and technical development of the GS1 128 Serial Shipping Container Label (aka; EAN/UCC 128, SSCC, LPN); this document was not designed for compliance or as part of a compliance management process undertaken by a a typical trading partner The Burlington Coat Factory Vendor Compliance guidelines can be found here: Burlington Coat Factory EDI Specification Documents can be found on the Burlington Coat Factory website under If there are any questions about this or any Burlington Coat Factory EDI specification contact EDI Support at (609) Ext 3340 (EDI 0) or [email protected], where an incident will be opened and answered by the next available EDI coordinator. i For internal use only

.. 5 4x7 Label Sample Mapping to the EDI 850... 6 PART B: SHIPPING LABEL PLACEMENT... 7 Shipping Label Placement... 7 Side Labeling... 7 Other Notes and Comments:.

3 05/15/2013 GS1-128 SERIAL SHIPPING LABEL SHIPPING LABEL REQUIREMENTS & EXAMPLES GS1 128 SERIAL SHIPPING LABEL Basic Requirements: 1. All cartons shipped to Burlington Coat Factory Distribution Centers and/or stores are required to display a Shipping Container label, regardless of carton content, purpose, receiving party, or location. 2. A valid ASN (EDI 856) must be received at least 24 hours prior to the shipment being received in the warehouse 3. The carton identifiers contained within the ASN must match those displayed on the shipping label 4. Carton IDs are expected to survive in the Burlington Coat Factory supply chain for a period of one year; do not re use Carton ID numbers during any one year period. Shipping Labels The Shipping Label contains information relevant to a specific shipment. Burlington Coat Factory has adopted the most current standards of the GS1 128 label format to form the basis for their shipping label standards. Updates Vendor Guidelines are considered as changes are made to the GS1 standards. Shipping Label Size Zone Height Each zone must measure 1.0 in height ± 0.2 ; however, a zone may be doubled in height to accommodate additional information. The height of the double high zone is 2.0 in height ± 0.4. Please note that Zone H must always be 2.0 ± 0.4 to accommodate the SSCC 18 bar code. Zone Width The width of the zones is determined by the width of the label. In some cases, the label width can be divided to accommodate two zones side by side. Label Height The recommended minimum label height is 6.0 ± 0.2 ; the height of the label can be taller if necessary to accommodate additional information; however, the sequence of zones must be preserved and the placement guidelines described below must be observed. Label Width The recommended minimum label width is 4.0 ± 0.2 Shipping Label Zones The layout of the GS1 128 label consists of different zones, each zone a separate building block. The size of the zones, with the exception of certain zones that have mandatory dimensions, can be adjusted to accommodate varying amounts of information. Even when zones are resized, however, the placement of information must remain consistent relative to the information in other zones. In other words, there is flexibility in placing the information within zones, but the sequence of zones must be preserved. 1 For internal use only

location. 2. A valid ASN (EDI 856) must be received at least 24 hours prior to the shipment being received in the warehouse 3.

4 05/15/2013 GS1-128 SERIAL SHIPPING LABEL 4x6 Label Sample Zone Mapping (Image shown at Actual Size 4.0 x6.0 2 For internal use only

5 05/15/2013 GS1-128 SERIAL SHIPPING LABEL 4x6 Label Sample Mapping to the EDI 850 (Image shown at Actual Size 4.0 x6.0 3 For internal use only

6 05/15/2013 GS1-128 SERIAL SHIPPING LABEL The 4x7 Label Burlington Coat Factory understands that some of our vendors prefer to use just one label for all of their customers and that this label may come in the form of a 4x7 Label; it is with that understanding that Burlington Coat Factory makes the following information available so that there is absolute clarity as to which zones represent the label content within the 4x7 label. Shipping Label Zones The layout of the GS1 128 label consists of different zones, each zone a separate building block. The size of the zones, with the exception of certain zones that have mandatory dimensions, can be adjusted to accommodate varying amounts of information. Even when zones are resized, however, the placement of information must remain consistent relative to the information in other zones. In other words, there is flexibility in placing the information within zones, but the sequence of zones must be preserved. Zone F The Shipper/Supplier Segment Zone F, the Shipper/Supplier Segment) is reserved for internal information that the shipper of the goods may require in the course of business to define loads, waves or other internal processes, in other words this zone is set aside specifically for Shipper specific information required by the shipper to process the shipment. 4 For internal use only

label content within the 4x7 label. Shipping Label Zones The layout of the GS1 128 label consists of different zones, each zone a separate building block.

7 05/15/2013 GS1-128 SERIAL SHIPPING LABEL 4x7 Label Sample Zone Mapping (Image shown at Actual Size 4.0 x7.0 ) 5 For internal use only

8 05/15/2013 GS1-128 SERIAL SHIPPING LABEL 4x7 Label Sample Mapping to the EDI 850 (Image shown at Actual Size 4.0 x7.0 ) 6 For internal use only

9 05/15/2013 GS1-128 SERIAL SHIPPING LABEL PART B: SHIPPING LABEL PLACEMENT GS1 128 SERIAL SHIPPING LABEL (aka; EAN/UCC 128, SSCC)) Shipping Label Placement The current GS1 US Application Standards for Shipping Container Codes calls for the placement of the Shipping Label on the side of the carton. Side Labeling In keeping with the guidelines set forth by the GS1 US Application Standards for Shipping Container Codes, Shipping Labels placed on the side of the carton must meet the following criteria: Shipping Labels must be placed on the long side of the carton with the bar codes in a vertical bar or picket fence orientation. In order to achieve this picket fence orientation, most labels will need to be placed straight up and down. Shipping Labels must be placed in such a way that the SSCC bar code appears no closer than 1¼ from the natural bottom of the carton. The Shipping Label must be placed so that the SSCC bar code appears no closer than 3 from the edge of the carton. If the Shipping Label is placed on the same side of the carton as a Product Label it must be placed to the left side of the Product Label so that it does not obscure any of the information on the Product Label and so that no bar code appears closer than 1¼ from the natural edge of the carton. For cartons where the height of the carton is less than that of the Shipping Label, one of the following must occur: o The entire Shipping Label may be placed on the top of the carton following the guidelines for Top Labeling. OR o The shipping label may be placed on the side of the carton with the bottom of the bar code placed at least 1¼ from the natural bottom; and the excess portion of the top of the label should be folded over to the top of the carton. Care must be taken in these cases to not crease the Shipping Label on any bar codes or other critical information. 7 For internal use only

Side Labeling In keeping with the guidelines set forth by the GS1 US Application Standards for Shipping Container Codes, Shipping Labels placed on the side of the carton must meet the following

10 05/15/2013 GS1-128 SERIAL SHIPPING LABEL Other Notes and Comments: There should not be any tape, marking, or additional labels covering any part of the UCC 128 label. UCC 128 labels must be printed on adhesive shipping labels, and should never be printed on plain paper. UCC 128 labels should be applied without any wrinkles or marks running through the bar code symbols. Do not affix the UCC 128 label to the disposable poly bag covering the garment. Pallet level UCC 128 labels are not acceptable User Note : This Burlington Coat Factory EDI Specification Document was developed exclusively for technical development purposes as would be undertaken by a typical trading partner as part of their on boarding process and technical development of the GS1 128 Serial Shipping Container Label (aka; EAN/UCC 128, SSCC, LPN); this document was not designed for compliance or as part of a compliance management process undertaken by a a typical trading partner The Burlington Coat Factory Vendor Compliance guidelines can be found here: Burlington Coat Factory EDI Specification Documents can be found on the Burlington Coat Factory website under If there are any questions about this or any Burlington Coat Factory EDI specification contact EDI Support at (609) Ext 3340 (EDI 0) or [email protected] where an incident will be opened and answered by the next available EDI coordinator. 8 For internal use only

UCC 128 labels should be applied without any wrinkles or marks running through the bar code symbols. Do not affix the UCC 128 label to the disposable poly bag covering the garment.

UCC/EAN 128 SERIAL SHIPPING CONTAINER LABEL (SSCC-18)

UCC/EAN 128 SERIAL SHIPPING CONTAINER LABEL (SSCC-18) All cartons shipped to BCFW Distribution Centers and direct to store shipments will require a BCFW UCC-128 Shipping Container label. As you implement