drain cleaning systems mechanical drain and pipe cleaning

Transcription

1 drain cleaning systems mechanical drain and pipe cleaning 1

2 Section Mechanical pipe cleaning Long service life, effi cient, high performance 2

3 3 Section Mechanical pipe cleaning Made in Germany Consultancy and ordering Our pipe cleaner units are bespoke systems made Please specify cable type and diameter in your order. Milling and cutting operations in particular re- and tested in Germany and based on a maintenance free design for trouble-free permanent quire a higher stability and traction transfer for difficult operations with heavy tools. Do not hesitate to use. This technology has been proven and tested for many years and allows our clients to work faster, cleaner, easier, and more effective to achieve with all your questions and issues. contact our qualified and experienced consultants maximum results. All tools and cables are made in Germany and undergo meticulous quality inspections. We use cerspoke products? - No problem! In cooperation with You are searching for tailored solutions and betified high quality steel of German production only. you, we develop the perfect solution for all challenges in practice. This will ensure a long and reliable use of that tool for our customers. Did you put us to the test already? Icon overview It goes without saying that you may use all the tools Meaning of the icons used in the section and equipment of our assortment on a trial basis. Mechanic drain cleaning machines If you have questions related to the use of our tools and equipment, or if you need more information, Hydraulic drain cleaning machine use our service hotline and contact our qualified drain cables (snakes) representatives: drain cable tools Phone: +49 (0) Chain knockers Milling tools Accessories 3

4 cleaning machines Sink Machine set, type K-45AF-5 for sink cables 8-10 mm and DN mm The hand operated motor cable unit K-45AF-5 is very handy and designed for mobile troubleshooting in kitchen and bath. It may be used in pipes of diameter mm. The continuously variable drive with thrust control produces the forward and reverse thrust of the cable through optional CW/CCW rotation of the drive. The container drum is made of rugged, glass fi ber reinforced nylon and accepts cables of 8 mm and 10 mm diameter (quick changeover possible). Set K-45AF-5 Sink-Machine includes: Cables DN 8 and 10 mm, including tools for 10 mm cable, maintenance spray, and transport case Tools for cable 10 mm: 1x articulated bulb auger, 1x grease fork, 1x bulb auger, 1x round Spade Cutter, 1x pointed Spade Cutter, 1x glove, 1x cable release wrench Fields of application: - for small pipe diameters of DN mm - for pipes in kitchen, bath, and basement Item number Specification Length K-45AF-5 Sink-Machine - complete kit Sink drum cable Ø 8 mm with angled bulb auger head 7.5 m Sink drum cable Ø 8 mm 10.0 m Technical data - K-45AF-5 Pipe diameter Ø mm Sink drum cable Ø 8 mm with core 7.5 m Sink drum cable Ø 8 mm with core 10.0 m Sink drum cable Ø 10 mm 7.5 m Sink drum cable Ø 10 mm 10.0 m Sink drum cable Ø 10 mm with 16 mm male-coupling 7.5 m Sink drum cable Ø 10 mm with 16 mm male-coupling 10.0 m Sink drum cable Ø 10 mm with core 7.5 m Sink drum cableø 10 mm with core 10.0 m Sink drum cable Ø 10 mm with core and 16 mm T-coupling 7.5 m Sink drum cables Working length Motor horsepower Voltage Speed Weight Dimensions (L x W x H) Ø 8 and 10 mm 7.5 m with Ø 8 mm cable 10 m with Ø 10 mm cable 400 Watts input power 230 V / 50 Hz stepless, CW and CCW rotation 15.4 kg 620 x 240 x 300 mm 4 Drain

5 RAK 39 - sectional drain cleaning machine for sectional cables 16 mm and DN mm The small pipe cleaner RAK 39 for sanitary systems is suitable for ND mm pipes, and cables of 16 mm diameter. Combined with an adaptor magazine, it may be used for 6, 8 and 10 mm cables as well. It is a reliable, powerful multipurpose pipe cleaner unit for building service and features the patented external clamping jaw system of all RAK units for quick replacement and maintenance of the clamping jaw system. Clamping jaw system included The external clamping jaw system facilitates replacement of the clamping jaws. The RAK units need no special tools, you may replace the clamping jaws within a few minutes and continue with your work. PRCD-SPS switch (safety switch) included The safety switch (FI adaptor) detects fault currents and disconnects so fast that life threathening accidents are avoided (10 ma trigger current). Fields of application: - Ideally suited for universal service, for pipe blockades located in branches of sinks, toilets, outlet lines, fl oor drains, and roof drainages. cleaning machines Item number Specification Version RAK 39 for sectional cables ø 6 / 8 / 10 / 16 mm Profi starter kit RAK 39 Included in scope of delivery: 1x drain cleaning machine RAK-39 1x guide hose for RAK 39, 4.2 m 6x professional cables Ø 16 mm, 2 m long 6x professional cables with core ø 16 mm, 2 m long 2x cable cage 1x 4-blade cutter 25 for ø 16 mm cable 1x 4-blade cutter 45 for ø 16 mm cable 1x fork cutting head 40 (smooth, 2 edges) 1x straight auger for ø 16 mm cable 1x chain knocker with 2 smooth chains for ø 16 mm cable 1x chain knocker with 2 spiked chains for ø 16 mm cable 1x coupling pin key TS 1 1x drain cleaning mitt, left hand 1x drain cleaning mitt, right hand 1x toolbox Guide hose for RAK 39 assembly with coupling, 2.1m long Technical data - RAK 39 Pipe diameter Drain Cables Working length Motor horsepower Voltage Speed Weight Dimensions (L x W x H) Ø mm Ø 6 / 8 / 10 / 16 mm 40 m with Ø 16 mm cable 10 m with Ø 6 / 8 mm cable 370 Watts input power 230 V / 50 Hz 670 rpm, cw/ccw rotation 16.0 kg 480 x 170 x 410 mm 5 Drain

6 cleaning machines RAK 40 - sectional drain cleaning machine for sectional cables mm and DN mm The universal pipe cleaner unit RAK 40 suitable for all applications is a multi-purpose pipe cleaner unit and may be used for ND mm pipes, accepts cables of mm diameter, or 6, 8 and 10 mm cables if combined with an adapter magazine - in short, it is suitable for all and anything. As all RAK units, it has the unique external clamping jaw system for quick replacement and easy maintenance of the clamping jaw system. Clamping jaw system included The external clamping jaw system facilitates replacement of the clamping jaws. The RAK units need no special tools, you may replace the clamping jaws within a few minutes and continue with your work. PRCD-SPS switch (safety switch) included The safety switch (FI adaptor) detects fault currents and disconnects so fast that life threathening accidents are avoided (10 ma trigger current). Fields of application: - Thanks to its strong motor and high traction, the RAK-40 is ideal for service, industries and removal of challenging blockades. Item number Specification Special features RAK 40 for sectional cables ø mm Profi starter kit RAK 40 22/16 Included in scope of delivery: 1x drain cleaning macine unit RAK-40 1x guide hose for RAK 40, 4.2 m long 5x standard cable: Ø 22 mm, 4 m long, with core 5x standard cable: Ø 22 mm, 4 m long 2x cable cage for ø 22 mm cable 1x 4-blade cutter 45 for ø 22 mm cable 1x 4-blade cutter 65 for ø 22 mm cable 1x fork cutter 65 for ø 22 mm cable 1x straight auger for ø 22 mm cable 1x expander cutter 100 for ø 22 mm cable 1x chain knocker with 2 smooth chains for ø 22 mm cable 1x chain knocker with 2 cam chains for ø 22 mm cable 2x coupling pin keys ø 16/22/32 mm 1x drain cleaning mitt, left hand 1x drain cleaning mitt, right hand 1x toolbox Guide hose for RAK 40 assembly with coupling, 4m long Technical data - RAK 40 Pipe diameter Drain Cables Working length Motor horsepower Voltage Speed Weight Dimensions (L x W x H) Ø mm Ø 6 / 8 / 10 / 16 / 22 mm 65 m with Ø 22 mm cable 55 m with Ø 16 mm cable 750 Watts input power 230 V / 50 Hz 670 rpm, cw/ccw rotation 22.0 kg 540 x 220 x 510 mm 6 Drain

7 RAK 41 - sectional drain cleaning machine for sectional cables mm and DN mm The RAK 41 is the power pack for heavy-duty and industrial cleaning - a professional, rugged pipe cleaner for industry and communities, suitable for pipes of ND mm and cables of mm diameter. Combined with an adaptor magazine, also suitable for 8 and 10 mm cables. It features the external clamping jaw system for quick replacement and maintenance of the clamping jaw system typical for all RAK units. Clamping jaw system included The external clamping jaw system facilitates replacement of the clamping jaws. The RAK units need no special tools, you may replace the clamping jaws within a few minutes and continue with your work. PRCD-SPS switch (safety switch) included The safety switch (FI adaptor) detects fault currents and disconnects so fast that life threathening accidents are avoided (10 ma trigger current). Fields of application: - Professional pipe cleaning of diffi cult blockades and incrustations cleaning machines Item number Specification Special features RAK 41 for sectional cables ø mm Profi starter kit RAK / 32 1x drain cleaning machine RAK-41 1x guide hose for RAK 41, 0.5 m 5x professional cables ø 22 mm, 4 m with core 5x professional cables ø 32 mm, 4 m with core 1x cable cage for ø 22 mm cable, 1x cable cage for ø 32 mm cable 1x 4-blade cutter 45 for ø 22 mm, 1x 4-blade cutter 65 for ø 22 mm 1x fork cutter 65 for ø 22 mm, 1x straight auger for ø 22 mm 1x expander cutter 150 for ø 22 mm cable 1x chain knocker for ø 22 cable with 3 smooth chains 1x extension adaptor ø 22 female, ø 32 male 1x retrieval auger for ø 22 mm, 1x retrieval auger for ø 32 mm 2x coupling pin keys for ø 16/22/32 mm cables 1x drain cleaning mitt, left hand 1x drain cleaning mitt, right hand 1x toolbox Guide hose for RAK 41 assembly with coupling, 0.5m long Guide hose for RAK 41 assembly with coupling, 4m long Tripod for RAK units Adjusts the ideal working height for RAK units and cable retrieval systems Technical data - RAK 41 Pipe diameter Drain Cables Working length Motor horsepower Voltage Speed Weight Dimensions (L x W x H) Ø mm Ø 8 / 10 / 16 / 22 / 32 mm 60 m with Ø 32 mm cable 50 m with Ø 22 mm cable 1,000 Watts input power 230 V / 50 Hz 620 rpm, cw/ccw rotation 25.0 kg 550 x 220 x 540 mm 7 Drain

8 cleaning macines RIS 22 - sectional drain cleaning machine For cables mm and DN mm The RIS 22 Pipe and sewer cleaner unit is the result of many years of experience in application and combines a rugged and long-lasting design with a user friendly quick release clamping jaw system. The unit is designed for use in pipes of DN mm, with a maximum working length of 80 m and suitable for use with 6, 8 and 10 mm cables and adaptor magazine or adaptor hose and 16 and 22 mm cables without. Special features: - Rugged unit for mobile use in building pipe systems - The high traction and high speed motor is especially suited for cutting and milling tools. - The stable and long-lasting cast aluminum frame and the aluminum covers protect the hermetically sealed electronics and the drive mechanism, so the components inside will remain clean for years. - The clamping jaws outside allow a quick and simple tool replacement. PRCD-S adaptor included (safety switch) The safety switch (FI adaptor) detects fault currents and disconnects so fast that life threathening accidents are avoided (10 ma trigger current); may also be used as an extension for other equipment. Item number Specification Special features RIS 22 for sectional cables ø mm, with PRCD-S adaptor Profi starter kit RIS 22 Included in scope of delivery: 1x drain cleaning machine RIS 22 1x PRCD-S adaptor 1x guide hose for RIS 22, 4.2 m 6x standard cables Ø 22 mm, 4 m long 1x cable cage for ø 22 mm cables 1x 4-blade cutter 45 for ø 22 mm cable 1x straight auger for ø 22 mm cable 1x coupling pin key TS 2 1x drain cleaning mitt, left hand 1x drain cleaning mitt, right hand 1x toolbox Technical data - RIS 22 Pipe diameter Drain Cables Working length Motor horsepower Voltage Speed Ø mm Ø 6 / 8 / 10 / 16 / 22 mm 70 m with Ø 22 mm cable 55 m with Ø 16 mm cable 750 Watts input power 230 V / 50 Hz 670 rpm, cw/ccw rotation Guide hose for RIS 22 assembly mit quick couplings, 4.2m long PRCD-S adaptor Safety switch with plug and coupling, BG recommended Weight Dimensions (L x W x H) 24.0 kg 530 x 200 x 500 mm 8 Drain

9 RIS 32 - sectional drain cleaning machine for sectional cables mm and DN mm The RIS 32 Pipe and sewer cleaner unit is the result of many years of experience in application and combines a rugged and long-las- ting design with a user friendly quick release clamping jaw system. The cleaner unit is designed for use with pipes of DN mm and is suitable for 10, 16, and 22 mm cables with adaptor and 32 mm cables without. Special features: - Rugged device for mobile cleaning of building tie-ins, smaller sewers, and storm drains. - The high traction and high speed motor is especially suited for cutting and milling tools. - The stable and long-lasting cast aluminum frame and the aluminum covers protect the hermetically sealed electronics and the drive mechanism, so the components inside will remain clean for years. - The clamping jaws outside allow a quick and simple tool replacement. PRCD-S adaptor included (safety switch) The safety switch (FI adaptor) detects fault currents and disconnects so fast that life threathening accidents are avoided (10 ma trigger current); may also be used as an extension for other equipment. cleaning machines Item number Specification Special features RIS 32 for sectional cables ø mm, with PRCD-S adaptor Profi starter kit RIS 32 Included in scope of delivery: 1x drain cleaning machine RIS-32 1x PRCD-S adaptor 1x guide hose FS-32-42, 4.2m long 1x cable cage SK-32 for ø 32 mm cables 1x cable cage SK-22 for ø 22 mm cables 6x standard cables Ø 32 mm, 4 m long 5x professional cables with core Ø 22 mm - rugged version, 4 m long 1x coupling pin key TS for ø 22 mm and ø 32 mm cables 1x straight auger GB 32 1x 4-blade cutter 45 for ø 32 mm cable KBB-32/45 1x 4-blade cutter 65 for ø 22 mm cable KBB-22/65 1x fork cutter 90 for ø 22 mm cable GSK-22/90 1x expander cutter ø 125 for ø 22 cable EXPSK-22/125 1x chain knocker for ø 22 mm cable with 2 smooth chains 1x chain knocker for ø 22 mm cable with 2 spiked chains 1x pair of drain cleaning mitt heavy duty version FHA 1x tool case, empty, WK Guide hose for RIS 32 assembly with quick coupling, 4.2m long PRCD-S adaptor Safety switch with plug and coupling, BG recommended Technical data - RIS 32 Pipe diameter Drain Cables Working length Motor horsepower Voltage Speed Weight Dimensions (L x W x H) Ø mm Ø 10 / 16 / 22 / 32 mm 70 m with Ø 32 mm cable 70 m with Ø 22 mm cable 1,100 Watts input power 230 V / 50 Hz 620 rpm, cw/ccw rotation 25.0 kg 530 x 200 x 500 mm 9 Drain

10 Drain cleaning machines RIS-Power 22/16 - sectional drain cleaning machine for sectional cables mm and DN mm The RIS Power 22/16 pillar machine is recommended for cables with a diameter of mm; combined with an adaptor zine it is also suitable for 8 mm and 10 mm cables. This rugged universal unit was designed for mobile use to clear building ing pipes maga- of ND mm. The unit features a high speed motor perfectly suited for cutting and milling operations. Fields of application: - The ideal tool for universal service, clears pipe blockades in branches of sinks, toilets, outlet lines, fl oor drains, and roof drainages. Special features: - Rugged design with sturdy clamping lever and big footrests to ensure a safe stand and to protect the motor cover against damage. - Big tool box included, no extra tool case required. - The motor cover is watertight, thus the RIS-Power 22/16 may be placed in the water up to marking 1. - External quick-release clamping jaw system replaceable in no time and without tools Item number Specification Special features RIS-Power 22/16 for sectional cables ø mm (optional 8-10 mm) Profi starter kit RIS-Power 22/ Guiding glove RIS-Power 22/16 4.2m long, with coupling Included in scope of delivery: 1x drain cleaning machine RIS-Power 22/16 1x guide hose for RIS-Power 22/16, 4.2 m 5x standard cables: Ø 22 mm, 4 m 5x standard cables: Ø 22 mm, 4 m with core 2x cable basket ø 22 mm 1x 4-Blade Cutter ø 22/45, 1x 4-Blade Cutter ø 22/65, 1x Fork Cutter ø 22/65, 1x Straight Auger ø 22, 1x Expander Cutter ø 22/100, 1x chain knocker for ø 22 mm cable with 2 smooth chains, 1x chain knocker ø 22 with 2 spiked chains 1x coupling pin key TS 2, 1x drain cleaning mitt, left hand 1x drain cleaning mitt, right hand 1 x toolbox Technical data - RIS-Power 22/16 Pipe diameter Ø mm Drain cables Ø 8 / 10 / 16 / 22 mm Approx 70 m with Ø 22 mm Working length cable Motor horsepower 750 Watts input power Voltage 230 V / 50 Hz Speed 670 rpm, cw/ccw rotation Weight 22.5 kg Dimensions (L x W x H) 500 x 250 x 575 mm 10

11 InRoKa-Rohrboy 20/100 Mobile HP flushing unit The Rohrboy is a small mobile HP fl usher for the big challenges with building tie-ins. Thanks to its output of 20 lpm and a pressure of 100 bar, the push hose and the special twister nozzle (spinning front jet), it will remove any blockade with ease. Simply push it forward from the inspection cover or connection down to the main sewer. You may also use it to prepare a TV inspection of building tie-ins: the spinning front jet nozzle cleans the pipe wall and removes solid deposits, thin roots, and grease. Fields of application: - To clean building tie-ins, to unblock pipes and to prepare TV inspections Special features: - Moveable, stable frame, with big ballon wheels for stairs - Frame of two parts, designed like a sack barrow, easy to disassemble for van transport - Foot switch for ergonomic operation and hose push transport Drain cleaning machines Item number Specification Special features InRoKa-Rohrboy 20/100 Complete system Included in scope of delivery: 1x Rohrboy 20/100 with foot switch and pressure switch 1x push hose ND6 with front jet nozzle 1x push hose NW8 with thrust force twister nozzle 1x Inlet hose (3 m) with 2x GK connector 1x hose bag InRoKa-20/100 push hose set 15 m long, with twister nozzle Thrust force pick nozzle IG 1/4" with 3 holes for push hose ND6 1/4" AG Pipe nozzle IG 1/4" with 3 holes Technical data - InRoKa Rohrboy Pipe diameter Ø mm 10 m long, ND6 and 15 m Thrust hose long, ND8 Hose port ND6 and ND8 Pump output 20 litres and max. 100 bar Thrust force twister jet nozzle 20 litres /100 bar - 3/8" IG ND6 push hose 10 m, 1/4" ND8 push hose 15 m, 3/8" Rugged transport bag for Rohrboy push hoses Total pressure head Voltage Weight Dimensions (L x W x H) 850 Pa (35 m hose) 230 V / 50 Hz 55.0 kg 1,004 x 650 x 500 mm 11

12 sectional drain cables and accessories Standard cables The Standard cable is fl exible and suited for all normal cleaning operations with standard tools. It works perfectly with shorter distances, narrow or multiple pipe bends. Item number Specification Length Wire diameter Standard cable Ø 16 mm 2 m 3.0 mm Standard cable Ø 22 mm 4 m 4.5 mm Standard cable Ø 32 mm 4 m 5.0 mm Combined Coupling Pin Key for Ø 16 / 22 / 32 mm Professional cables The professional cable (extra strong) is a rugged and tempered version of our standard cables, but with higher strength and traction. The cable is designed for heavy blockades which require higher traction and heavy tools, e.g. cutters and milling heads. Item number Specification Length Wire diameter Professional cable Ø 16 mm 2 m 3.5 mm Professional cable Ø 16 mm 4 m 3.5 mm Professional cable Ø 22 mm 4 m 5.0 mm Professional cable Ø 32 mm 4 m 6.0 mm Combined Coupling Pin Key for Ø 16 / 22 / 32 mm Standard cables with core The standard cable with core is designed for use in areas with heavy contamination. Its black plastics core is highly resistant against temperature and climate and prevents that the cable is loaded with clogged material, e.g. dirt or residuals of textile or cellulose blockages. Item number Specification Length Wire diameter Standard cable with core Ø 16 mm 2 m 3.0 mm Standard cable with core Ø 22 mm 4 m 4.5 mm Standard cable with core Ø 32 mm 4 m 5.0 mm Combined Coupling Pin Key for Ø 16 / 22 / 32 mm Professional cables with core The professional cable with core (extra strong) and larger wire diameter is designed for heavily contaminated areas and difficult blockades which require a higher traction. Its red plastics core prevents that the cable is loaded with clogged material, e. g. dirt or residuals of textile or cellulose blockages. Item number Specification Length Wire diameter Professional cable with core Ø 16 mm 2 m 3.5 mm Professional cable with core Ø 16 mm 4 m 3.5 mm Professional cable with core Ø 22 mm 4 m 5.0 mm Professional cable with core Ø 32 mm 4 m 6.0 mm Combined Coupling Pin Key for Ø 16 / 22 / 32 mm 12

13 cable cage / - magazine The cable cage stores all cables for transport. The magazine with its handy modular system is a compact solution for storage of cable baskets and cable units. Item number Specification Dimensions Weight Cable cage type SK-16 for cables Ø 16 mm L530 x B440 x H kg Cable cage type SK-22 for cables Ø 22 mm L560 x B460 x H kg Cable cage type SK-32 for cables Ø 32 mm L590 x B520 x H kg Magazine for cable cage type SK-16 L500 x W175 x H kg Magazine for cable cage type SK-22 L500 x W205 x H kg Magazine for cable cage type SK-32 L500 x W235 x H kg Extension and reduction Adapter Reducing cables and extension cables and/or reducers/extension adaptors make it possible to couple cables of a determined size with tools of other types. Item number Specification Holder Length Extension cable Ø 16 to 22 mm female / male 140 mm Reducing cable Ø 16 to 22 mm female / male 140 mm Extension adapter Ø 16 to 22 mm female / male 40 mm Reduction adapter Ø 16 to 22 mm female / male 40 mm Extension adapter Ø 22 to 32 mm female / male 45 mm Reduction adapter Ø 32 to 22 mm female / male 45 mm Combination Adapter Item number Specification Holder Length Combination Adapter Ø 16 mm Female / Female 180 mm Combination Adapter Ø 16 mm Male / Male 180 mm Combination Adapter Ø 16 mm Female / Male 180 mm Combination Adapter Ø 22 mm Female / Female 190 mm Combination Adapter Ø 22 mm Male / Male 190 mm Combination Adapter Ø 22 mm Female / Male 190 mm Combination Adapter Ø 32 mm Female / Female 195 mm Combination Adapter Ø 32 mm Male / Male 195 mm Combination Adapter Ø 32 mm Female / Male 195 mm Karo cable adapter Female Male Male Male Female Male Adapter Karo-AS15 for Ø 16 mm and AS20 Articulated adapter Karo-AS10, AS15 and for Ø 22 mm cables and tools. AS20 for better bend capability. Item number Specification Holder Length Articulated adapter Karo-AS10 for Ø 16 mm AS10 / 16 mm pin 35 mm Adapter Karo-AS15 for Ø 16 mm cable AS15 / 16 mm pin 38 mm Adapter Karo-AS15 for Ø 16 mm cable AS15 / 16 mm pin 140 mm Articulated adapter Karo-AS15 for Ø 16 mm AS15 / 16 mm pin 43 mm Adapter Karo-AS20 for Ø 22 mm cable AS20 / 22 mm pin 48 mm Adaptor Karo-AS20 for Ø 22 mm cable AS20 / 22 mm pin 140 mm Articulated adaptor Karo-AS20 for Ø 22 mm AS20 / 22 mm pin 52 mm 13sectional drain cables and accessories

14 auger tools Straight Auger The Straight Auger is mostly used as the fi rst tool if the cause of the blockage is not clear yet. It is also used as a auger in case of textile and cellulose blockages in order to achieve some water fl ow in case of a total blockage. Bulb Auger The Bulb Auger may be used only for light cellulose and textile blockages because of its high fl exibility. The specially formed club simplifi es penetration into narrow bends. Item number Specification Length Ø Straight Auger for cable Ø 16 mm 110 mm 16 mm Straight Auger for cable Ø 22 mm 210 mm 22 mm Straight Auger for cable Ø 32 mm 220 mm 32 mm Item number Specification Length Ø Bulb Auger for cable Ø 16 mm 115 mm 28 mm Bulb Auger for cable Ø 16 mm / mm 28 mm Bulb Auger for cable Ø 22 mm 180 mm 40 mm Bulb Auger for cable Ø 22 mm / mm 40 mm Bulb Auger for cable Ø 32 mm 220 mm 50 mm Funnel Auger Retrieving Auger The Funnel Auger is used especially in case of textile and cellulose blockages. Thanks to the funnel design, this tool has a large action range and can also be used for large pipe diameters. The funnel auger can also be used as a retrieval tool for cables that have remained in the pipe. Item number Specification Length Ø Funnel Auger Ø 16 mm 110 mm 32 mm Funnel Auger Ø 22 mm 185 mm 55 mm Funnel Auger Ø 32 mm 195 mm 60 mm The Retrieving Auger is used for retrieval of cables that stuck in the pipe. This tool has an exposed catching arm for catching the cable. WARNING: NOT SUITABLE FOR DRILLING! Item number Specification Length Ø Retrieving Auger Ø 16 mm 55 mm 34 mm Retrieving Auger Ø 22 mm 100 mm 45 mm Retrieving Auger Ø 32 mm 125 mm 65 mm 14

15 Drop-Head Auger The Drop-Head Auger and the joint allow an easier penetration in narrow pipe bends than the standard club auger. Similar to the normal club auger, this auger is only suited for minor blockades with textile and cellulose material. Item number Specification Length Ø Drop Head Auger for cable Ø 16 mm 83 mm 28 mm Drop Head Auger for cable Ø 22 mm 125 mm 40 mm Long Bulb Auger The Long Bulb Auger combines good flexibility and traction. It comes in handy for narrow pipe bends. Item number Specification Length Ø Long Bulb Auger for cable Ø 16 mm 150 mm 28 mm Drop-Head Auger, short version The short version of the Drop-Head Auger combines the benefi ts of articulation of the standard club auger, with a shorter tool length which makes it especially suitable for use in narrow and very narrow pipe bends. In addition, the tool may be also used as a retrieval auger. Item number Specification Length Ø Short Drop Head Auger for cables Ø 16 mm 55 mm 28 mm Magnetic Clubs The Magnetic Club allows retrieval of magnetic metals in pipes and sewer systems. It may be used to retrieve metal objects or lost cable tools. Item number Specification Traction Ø Magnetic Club for cable Ø 16 mm 8.00 kg 35 mm Magnetic Club for cable Ø 22 mm 27.0 kg 50 mm Magnetic Club for cable Ø 32 mm 47.0 kg 60 mm 15auger tools

16 cutter tools Spade Cutter 4-Blade Cutter SpadeCutter>45mm(sawtooth) Spade Cutter < 55 mm (smooth) The Spade Cutter is mainly used for peeling open greased, encrusted or heavily silted up pipes. The tough, high-strength augering blades are made of tempered spring steel and riveted to the couplings. Deformations or fractures, which may occur with soldered or welded cross-blades, are excluded with our riveted tools. The 4-Blade Cutter is a handy, universal tool for universal use: to clear pipes of textile blockades, sludge deposits, pipe incrustations etc. The tempered cross-blades of highstrength spring steel are joined to the couplings by means of rivets. Deformations or fractures, which may occur in case of soldered or welded cross-blades, are eliminated in our riveted tools. Item number Specification Cable type Range of application Spade Cutter 25 (sawtooth) Ø 16 mm mm Spade Cutter 35 (sawtooth) Ø 16 mm mm Spade Cutter 45 (sawtooth) Ø 16 mm mm Spade Cutter 55 (smooth) Ø 16 mm mm Item number Specification Cable type Range of application Blade Cutter 25 Ø 16 mm mm Blade Cutter 35 Ø 16 mm mm Blade Cutter 45 Ø 16 mm mm Blade Cutter 55 Ø 16 mm mm Spade Cutter 45 (sawtooth) Ø 22 mm mm Spade Cutter 55 (sawtooth) Ø 22 mm mm Spade Cutter 55 (smooth) Ø 22 mm mm Spade Cutter 65 (smooth) Ø 22 mm mm Spade Cutter 80 (smooth) Ø 22 mm mm Spade Cutter 90 (smooth) Ø 22 mm mm Spade Cutter 35 (sawtooth) Ø 32 mm mm Spade Cutter 45 (sawtooth) Ø 32 mm mm Spade Cutter 55 (smooth) Ø 32 mm mm Spade Cutter 65 (smooth) Ø 32 mm mm Spade Cutter 80 (smooth) Ø 32 mm mm Spade Cutter 90 (smooth) Ø 32 mm mm Blade Cutter 35 Ø 22 mm mm Blade Cutter 45 Ø 22 mm mm Blade Cutter 55 Ø 22 mm mm Blade Cutter 65 Ø 22 mm mm Blade Cutter 80 Ø 22 mm mm Blade Cutter 90 Ø 22 mm mm Blade Cutter 115 Ø 22 mm mm Blade Cutter 35 Ø 32 mm mm Blade Cutter 45 Ø 32 mm mm Blade Cutter 55 Ø 32 mm mm Blade Cutter 65 Ø 32 mm mm Blade Cutter 80 Ø 32 mm mm Blade Cutter 90 Ø 32 mm mm Blade Cutter 115 Ø 32 mm mm 16

17 U-Cutter Grease Cutter / Ball Grease Cutter cutter tools Easy replacement of the edges The U-Cutters (smooth) for 16 mm cables with 2 or 4 edges of tempered spring steel are applied for slight and heavy sludge deposits or diffi cult grease blockades. The U-Cutters (sawtooth) for 22 and 32 mm cables with two serrations of high quality steel are used for removal of roots inside pipes. The Grease Cutter includes 2 rugged edges. Made of tempered spring steel, it was designed for removal of difficult grease and sludge blockages. It is used with 16 and 22 mm cables. The Ball Grease Cutter is the successor of the grease fork. This tool with 2 crosswise spring forks is especially suited for cutting / scraping of grease pipes with narrow bends. Item number Specification Cable type Range of application U-Cutter 40 (smooth, 2 edges) Ø 16 mm mm U-Cutter 40 (smooth, 4 edges) Ø 16 mm mm U-Cutter 65 (sawtooth) Ø 22 mm mm U-Cutter 90 (sawtooth) Ø 22 mm mm U-Cutter 110 (sawtooth) Ø 22 mm mm U-Cutter 150 (sawtooth) Ø 22 mm mm Ridgid Sharktooth U-Cutter Ø 22 mm mm U-Cutter 65 (sawtooth) Ø 32 mm mm U-Cutter 90 (sawtooth) Ø 32 mm mm U-Cutter 125 (sawtooth) Ø 32 mm mm U-Cutter 150 (sawtooth) Ø 32 mm mm Item number Specification Cable type Range of application Grease Cutter 25 Ø 16 mm mm Grease Cutter 35 Ø 16 mm mm Grease Cutter 40 Ø 16 mm mm Grease Cutter 45 Ø 16 mm mm Grease Cutter 50 Ø 16 mm mm Ball Grease Cutter 25 Ø 16 mm mm Ball Grease Cutter 35 Ø 16 mm mm Ball Grease Cutter 40 Ø 16 mm mm Ball Grease Cutter 45 Ø 16 mm mm Ball Grease Cutter 50 Ø 16 mm mm Grease Cutter 40 Ø 22 mm mm Grease Cutter 50 Ø 22 mm mm Grease Cutter 65 Ø 22 mm mm Ball Grease Cutter 40 Ø 22 mm mm Ball Grease Cutter 50 Ø 22 mm mm Ball Grease Cutter 65 Ø 22 mm mm 17

18 cutter tools Ball chain head Expander cutter The ball chain head removes even the most diffi cult pipe deposits (e. g. concrete slime). The spinning steel balls crush all deposits formed. WARNING: Not suitable for clay pipes! The expansion cutter is a sophisticated special tool for heavy scraping / cutting / peeling operations. The spring mechanism adjusts the tool edges exactly to the pipe's inner diameter to be cleared. This means, the complete removal of hard deposits, incrustations, and root fi bres is not a problem. Item number Specification Cable type Range of application Ball chain head 20 Ø 16 mm mm Ball chain head 25 Ø 16 mm mm Ball chain head 35, groove Ø 22 mm mm Ball chain head 40, groove Ø 22 mm mm Item number Specification Cable type Range of application Expander cutter 100 Ø 22 mm max. 100 mm Expander cutter 125 Ø 22 mm max. 125 mm Expander cutter 150 Ø 22 mm max. 150 mm Expander cutter 200 Ø 22 mm max. 200 mm Expander cutter 250 Ø 22 mm max. 250 mm Expander cutter 100 Ø 32 mm max. 100 mm Expander cutter 125 Ø 32 mm max. 125 mm Expander cutter 150 Ø 32 mm max. 150 mm Expander cutter 200 Ø 32 mm max. 200 mm Expander cutter 250 Ø 32 mm max. 250 mm Replacement cutter set 100 Ø 22/32 mm max. 100 mm Replacement cutter set 125 Ø 22/32 mm max. 125 mm Replacement cutter set 150 Ø 22/32 mm max. 150 mm Replacement cutter set 200 Ø 22/32 mm max. 200 mm Replacement cutter set 250 Ø 22/32 mm max. 250 mm Spare expander spring Ø 22/32 mm - 18

19 Root Cutter, wide version coarse-toothed The tempered Root Cutters (wide version) made of high quality spring steel have big serrations at the front and rear side and are preferred in pipes with thicker roots. Item number Specification Cable type Tools Ø Root Cutter, broad, coarse-toothed Ø 45 mm Ø 16 mm 45 mm Root Cutter, broad, coarse-toothed Ø 55 mm Ø 16 mm 55 mm Root Cutter, broad, coarse-toothed Ø 65 mm Ø 22 mm 65 mm Root Cutter, broad, coarse-toothed Ø 90 mm Ø 22 mm 90 mm Root Cutter, broad, coarse-toothed Ø 110 mm Ø 22 mm 110 mm Root Cutter, broad, coarse-toothed Ø 125 mm Ø 22 mm 125 mm Root Cutter, broad, coarse-toothed Ø 150 mm Ø 22 mm 150 mm Root Cutter, broad, coarse-toothed Ø 175 mm Ø 22 mm 175 mm Root Cutter, broad, coarse-toothed Ø 200 mm Ø 22 mm 200 mm Root Cutter, broad, coarse-toothed Ø 65 mm Ø 32 mm 65 mm Root Cutter, broad, coarse-toothed Ø 90 mm Ø 32 mm 90 mm Root Cutter, broad, coarse-toothed Ø 110 mm Ø 32 mm 110 mm Root Cutter, broad, coarse-toothed Ø 125 mm Ø 32 mm 125 mm Root Cutter, broad, coarse-toothed Ø 150 mm Ø 32 mm 150 mm Root Cutter, broad, coarse-toothed Ø 175 mm Ø 32 mm 175 mm Root Cutter, broad, coarse-toothed Ø 200 mm Ø 32 mm 200 mm Root Cutter, broad, coarse-toothed Ø 250 mm Ø 32 mm 250 mm Root Cutter, broad, coarse-toothed Ø 300 mm Ø 32 mm 300 mm Root Cutter, broad, coarse-toothed Ø 350 mm Ø 32 mm 350 mm Root Cutter, short version fi n e - t o o t h e d The tempered Root Cutters (short version) made of high quality spring steel have fine serrations at the front and rear sides and are preferred in pipes with thicker roots. The short version is especially suited for narrow bends and is the preferred tool in reburbishment operations. Item number Specification Cable type Tools Ø Root Cutter, short, fi ne-toothed, Ø 45 Ø 16 mm 45 mm Root Cutter, short, fi ne-toothed, Ø 55 Ø 16 mm 55 mm Root Cutter, short, fi ne-toothed, Ø 45 Ø 22 mm 45 mm Root Cutter, short, fi ne-toothed, Ø 55 Ø 22 mm 55 mm Root Cutter, short, fi ne-toothed, Ø 65 Ø 22 mm 65 mm Root Cutter, short, fi ne-toothed, Ø 75 Ø 22 mm 75 mm Root Cutter, short, fi ne-toothed, Ø 90 Ø 22 mm 90 mm Root Cutter, short, fi ne-toothed, Ø 110 Ø 22 mm 110 mm Root Cutter, short, fi ne-toothed, Ø 125 Ø 22 mm 125 mm Root Cutter, short, fi ne-toothed, Ø 150 Ø 22 mm 150 mm Root Cutter, short, fi ne-toothed, Ø 175 Ø 22 mm 175 mm Root Cutter, short, fi ne-toothed, Ø 200 Ø 22 mm 200 mm Root Cutter, short, fi ne-toothed, Ø 55 Ø 32 mm 55 mm Root Cutter, short, fi ne-toothed, Ø 65 Ø 32 mm 65 mm Root Cutter, short, fi ne-toothed, Ø 75 Ø 32 mm 75 mm Root Cutter, short, fi ne-toothed, Ø 90 Ø 32 mm 90 mm Root Cutter, short, fi ne-toothed, Ø 110 Ø 32 mm 110 mm Root Cutter, short, fi ne-toothed, Ø 125 Ø 32 mm 125 mm Root Cutter, short, fi ne-toothed, Ø 150 Ø 32 mm 150 mm Root Cutter, short, fi ne-toothed, Ø 175 Ø 32 mm 175 mm Root Cutter, short, fi ne-toothed, Ø 200 Ø 32 mm 200 mm 19root cutter tools

20 chain knockers chain knockers smooth chain chain knockers spiked chain The chain knocker with smooth chains is the most popular pipe cleaner tool. It is used in particular in fi nal pipe cleaning since the tool is gentle to the surface of cast pipes (NK) and plastics pipes (GK). The chain knocker with cam chains is used in particular for removal of smaller roots and incrustations (and dry clods). Item number Specification Cable type Range of application Chain knocker, 1 smooth chain Ø 16 mm mm Chain knocker, 2 smooth chains Ø 16 mm mm Chain knocker, 3 smooth chains Ø 16 mm mm Chain knocker, 4 smooth chains Ø 16 mm mm Item number Specification Cable type Range of application Chain knocker, 1 spiked chain Ø 16 mm mm Chain knocker, 2 spiked chains Ø 16 mm mm Chain knocker, 3 spiked chains Ø 16 mm mm Chain knocker, 4 spiked chains Ø 16 mm mm Chain knocker, 1 smooth chain Ø 22 mm mm Chain knocker, 2 smooth chains Ø 22 mm mm Chain knocker, 3 smooth chains Ø 22 mm mm Chain knocker, 4 smooth chains Ø 22 mm mm Chain knocker, 1 spiked chain Ø 22 mm mm Chain knocker, 2 spiked chains Ø 22 mm mm Chain knocker, 3 spiked chains Ø 22 mm mm Chain knocker, 4 spiked chains Ø 22 mm mm Chain knocker, 1 smooth chain Ø 32 mm mm Chain knocker, 2 smooth chains Ø 32 mm mm Chain knocker, 3 smooth chains Ø 32 mm mm Chain knocker, 4 smooth chains Ø 32 mm mm Chain knocker, 1 spiked chain Ø 32 mm mm Chain knocker, 2 spiked chains Ø 32 mm mm Chain knocker, 3 spiked chains Ø 32 mm mm Chain knocker, 4 spiked chains Ø 32 mm mm Also available as a female / male assembly. Please always specify the item number + FM when you send an order. Also available as a female / male assembly. Please always specify the item number + FM when you send an order. 20

21 Saw toothed chain knockers The saw toothed chain knocker is a tool designed for removal of smaller roots and hard incrustations. The soldered carbide saw teeth have a far lower wear than the standard cam chains. Item number Specification Cable type Range of application HSZ-KS, 1 saw tooth chain Ø 16 mm mm HSZ-KS, 2 saw tooth chains Ø 16 mm mm HSZ-KS, 3 saw tooth chains Ø 16 mm mm HSZ-KS, 4 saw tooth chains Ø 16 mm mm HSZ-KS, 1 saw tooth chain Ø 22 mm mm HSZ-KS, 2 saw tooth chains Ø 22 mm mm HSZ-KS, 3 saw tooth chains Ø 22 mm mm HSZ-KS, 4 saw tooth chains Ø 22 mm mm HSZ-KS, 1 saw tooth chain Ø 32 mm mm HSZ-KS, 2 saw tooth chains Ø 32 mm mm HSZ-KS, 3 saw tooth chains Ø 32 mm mm HSZ-KS, 4 saw tooth chains Ø 32 mm mm Also available as a female / male assembly. Please always specify the item number + FM when you send an order. Combined chain knockers A combination chain knocker k may be combined with any other tools, to adapt your tool combination to the actual situation. The steel protector included in the delivery prevents any contamination of the coupling. Item number Specification Cable type Range of application Combined chain knocker, 2 smooth chains Ø 16 mm mm Combined chain knocker, 3 smooth chains Ø 16 mm mm Combined chain knocker, 2 spiked chains Ø 16 mm mm Combined chain knocker, 3 spiked chains Ø 16 mm mm Combined chain knocker, 2 smooth chains Ø 22 mm mm Combined chain knocker, 3 smooth chains Ø 22 mm mm Combined chain knocker, 2 spiked chains Ø 22 mm mm Combined chain knocker, 3 spiked chains Ø 22 mm mm Combined chain knocker, 2 smooth chains Ø 32 mm mm Combined chain knocker, 3 smooth chains Ø 32 mm mm Combined chain knocker, 2 spiked chains Ø 32 mm mm Combined chain knocker, 3 spiked chains Ø 32 mm mm 21chain knockers

22 chain knockers chain knockers smooth (short) chain knockers spike (short) The short version of the chain knocker with smooth chains about 120 mm long is highly bend capable for smaller pipe diameters and down pipes. The short version of the chain knocker with spiked chains about 120 mm long is highly bend capable for smaller pipe diameters and down pipes. Item number Specification Cable type Range of application KS, short version, 1 smooth chain Ø 16 mm mm KS, short version, 2 smooth chains Ø 16 mm mm KS, short version, 3 smooth chains Ø 16 mm mm KS, short version, 4 smooth chains Ø 16 mm mm Item number Specification Cable type Range of application KS, short version, 1 spiked chain Ø 16 mm mm KS, short version, 2 spiked chains Ø 16 mm mm KS, short version, 3 spiked chains Ø 16 mm mm KS, short version, 4 spiked chains Ø 16 mm mm KS, short version, 1 smooth chain Ø 22 mm mm KS, short version, 2 smooth chains Ø 22 mm mm KS, short version, 3 smooth chains Ø 22 mm mm KS, short version, 4 smooth chains Ø 22 mm mm KS, short version, 1 spiked chain Ø 22 mm mm KS, short version, 2 spiked chains Ø 22 mm mm KS, short version, 3 spiked chains Ø 22 mm mm KS, short version, 4 spiked chains Ø 22 mm mm KS, short version, 1 smooth chain Ø 32 mm mm KS, short version, 2 smooth chains Ø 32 mm mm KS, short version, 3 smooth chains Ø 32 mm mm KS, short version, 4 smooth chains Ø 32 mm mm KS, short version, 1 spiked chain Ø 32 mm mm KS, short version, 2 spiked chains Ø 32 mm mm KS, short version, 3 spiked chains Ø 32 mm mm KS, short version, 4 spiked chains Ø 32 mm mm Also available as a female / male assembly. Please always specify the item number + FM when you send an order. Also available as a female / male assembly. Please always specify the item number + FM when you send an order. 22

23 Ring chain knockers If you apply rings of more than Ø 100 mm, a stabiliser should be installed between cable and chain knocker to make sure that the tool cannot revert and twist inside the pipe. This special design of a chain knocker makes it possible to disassemble, adjust, and reassemble as often as required. To do this, you need only a few minutes but no special tools. All Ring Chain Knockers are equipped with 4 spiked chains. We also deliver the Ring Chain Knocker with smooth chains at request. Item number Specification Cable type Range of application Ring Chain Knocker Ø 65, 4 Chains Ø 22 mm 80 mm and above Ring Chain Knocker Ø 75, 4 Chains Ø 22 mm 100 mm and above Ring Chain Knocker Ø 90, 4 Chains Ø 22 mm 120 mm and above Ring Chain Knocker Ø 100, 4 Chains Ø 22 mm 125 mm and above Ring Chain Knocker Ø 110, 4 Chains Ø 22 mm 140 mm and above Ring Chain Knocker Ø 125, 4 Chains Ø 22 mm 150 mm and above Ring Chain Knocker Ø 150, 4 Chains Ø 22 mm 175 mm and above Ring Chain Knocker Ø 180, 4 Chains Ø 22 mm 200 mm and above Ring Chain Knocker Ø 65, 4 Chains Ø 32 mm 90 mm and above Ring Chain Knocker Ø 75, 4 Chains Ø 32 mm 100 mm and above Ring Chain Knocker Ø 90, 4 Chains Ø 32 mm 120 mm and above Ring Chain Knocker Ø 100, 4 Chains Ø 32 mm 125 mm and above* Ring Chain Knocker Ø 110, 4 Chains Ø 32 mm 140 mm and above* Ring Chain Knocker Ø 125, 4 Chains Ø 32 mm 150 mm and above* Ring Chain Knocker Ø 150, 4 Chains Ø 32 mm 175 mm and above* Ring Chain Knocker Ø 180, 4 Chains Ø 32 mm 200 mm and above* * Stabilizer for ring chain knocker Ø 32 mm - Ring saw tooth chain knockers If you apply rings of more than Ø 100 mm, a stabiliser should be installed between cable and chain knocker to make sure that the tool cannot revert and twist inside the pipe. The ring saw tooth chain scraper has the benefi t that it can be disassembled, adjusted, and re-assembled as often as required. To do this, you need only a few minutes but no special tools. All spinning ring saw toothed chain scrapers are equipped with 4 saw toothed chains. Other ring dimensions are also available. Item number Specification Cable type Range of application Ring saw tooth CK Ø 65, 4 Chains Ø 22 mm 90 mm and above Ring saw tooth CK Ø 75, 4 Chains Ø 22 mm 100 mm and above Ring saw tooth CK Ø 100, 4 Chains Ø 22 mm 125 mm and above Ring saw tooth CK Ø 125, 4 Chains Ø 22 mm 150 mm and above Ring saw tooth CK Ø 150, 4 Chains Ø 22 mm 175 mm and above Ring saw tooth CK Ø 65, 4 Chains Ø 32 mm 90 mm and above Ring saw tooth CK Ø 75, 4 Chains Ø 32 mm 100 mm and above Ring saw tooth CK Ø 100, 4 Chains Ø 32 mm 125 mm and above* Ring saw tooth CK Ø 125, 4 Chains Ø 32 mm 150 mm and above* Ring saw tooth CK Ø 150, 4 Chains Ø 32 mm 175 mm and above* * Stabilizer for ring chain knocker Ø 32 mm - 23chain knockers

24 Milling chain knockers Milling chain knockers If you apply rings of more than Ø 100 mm, a stabiliser should be installed between cable and chain knocker to make sure that the tool cannot revert and twist inside the pipe. The milling chain knocker with carbide band is a tool used for roughening of pipe walls and removal of hard incrustations to prepare refurbishment. The milling chain knocker is also available as a Ring Chain Knocker with 4 carbide band chains. This special design of the chain knocker has the advantage that it can be disassembled, adapted and reassembled as often as required. Item number Specification Cable type Range of application Spare parts of chain knockers The replacement chains may be used to weld and repair welded chain knockers or to replace chain knockers with rings. Item number Specification Cable type Length CK, 2 chains with carbide band Ø 22 mm 100 mm and above CK, 3 chains with carbide band Ø 22 mm 125 mm and above CK, 4 chains with carbide band Ø 22 mm 150 mm and above Ring Chain Knocker Ø 65, 4 carbide Ø 22 mm 100 mm and above Ring Chain Knocker Ø 75, 4 carbide Ø 22 mm 110 mm and above Ring Chain Knocker Ø 100, 4 carbide Ø 22 mm 125 mm and above Ring Chain Knocker Ø 125, 4 carbide Ø 22 mm 150 mm and above Ring Chain Knocker Ø 150, 4 carbide Ø 22 mm 175 mm and above CK, 2 chains with carbide band Ø 32 mm 150 mm and above CK, 3 chains with carbide band Ø 32 mm 175 mm and above CK, 4 chains with carbide band Ø 32 mm 200 mm and above Ring Chain Knocker Ø 65, 4 carbide Ø 32 mm 100 mm and above Ring Chain Knocker Ø 75, 4 carbide Ø 32 mm 110 mm and above Ring Chain Knocker Ø 100, 4 carbide Ø 32 mm 125 mm and above* Ring Chain Knocker Ø 125, 4 carbide Ø 32 mm 150 mm and above* Ring Chain Knocker Ø 150, 4 carbide Ø 32 mm 175 mm and above* * Stabilizer for ring chain knocker Ø 32 mm Replacement smooth chain Ø 16 mm 150 mm Replacement spiked chains Ø 16 mm 150 mm Replacement saw tooth chain Ø 16 mm 150 mm Replacement chain with carbide band Ø 16 mm 150 mm Replacement smooth chain Ø 22 / 32 mm 240 mm Replacement spiked chains Ø 22 / 32 mm 240 mm Replacement saw tooth chain Ø 22 / 32 mm 240 mm Replacement chain with carbide band Ø 22 / 32 mm 240 mm Replacement ring Ø 65 mm Ø 22 / 32 mm Replacement ring Ø 75 mm Ø 22 / 32 mm Replacement ring Ø 90 mm Ø 22 / 32 mm Replacement ring Ø 100 mm Ø 22 / 32 mm Replacement ring Ø 110 mm Ø 22 / 32 mm Replacement ring Ø 125 mm Ø 22 / 32 mm Replacement ring Ø 150 mm Ø 22 / 32 mm Replacement ring Ø 180 mm Ø 22 / 32 mm - 24 All other spare parts for the Ring Chain Knockers are available at request.