Funktionale Textilien dank Nanotechnologie
|
|
|
- Percival McLaughlin
- 9 years ago
- Views:
Transcription
1 Funktionale Textilien dank Nanotechnologie Dr. Dirk Hegemann EMPA Materials Science and Technology Lerchenfeldstrasse 5, CH-9014 St.Gallen / Schweiz dirk.hegemann [email protected] Nanotechnologie, ihre Produkte und Risiken für den Verbraucher 28. März 2006, BfR, Berlin
2 EMPA Materials Science & Technology Member of the ETH Domain in Switzerland 820 employees at three sites R&D for SMEs St.Gallen Dübendorf Thun St. Gallen Lake of Konstanz (Bodensee)
3 Empa Laboratory Functional Fibers and Textiles %Fiber and Textile Chemistry - finishing, wet-chemical treatment %Fiber Development - bi-component fiber spinning device %Plasma-modified Surfaces - cleaning, activation, deposition
4 Outline Functional Textiles thanks to Nanotechnology %Dimensions d gas dact W/F dep A dep gas in %Nanoscaled coatings %Nanostructuring with particles %Incorporation of nano particles %Applications
5 Functional Textiles thanks to Nanotechnology Nanostructures and dimensions (<100 nm) 1-dimensional %nanoscaled coatings on fibers and textiles (by plasma coating or wet-chemical grafting) 2-dimensional %nanostructures on fibers and textiles (by etching, embossing or nanoparticle incorporation at the surface) %nanofibers (by electrospinning) 3-dimensional %nanoparticles in fibers and textiles (by incorporation in plasma coatings or during fiber spinning) %nanoporous coatings New material properties of textiles
6 Nanoscaled Coatings Self-assembled monolayers (SAMs) on ropes Grafting of fluoroalkyltrichlorosilanes uncoated coated? water repellency PA Loss of the performance of wet climbing ropes can be avoided.
7 Nanoscaled Plasma Coatings Plasma CVD and PVD layer by layer growth plasma polymerization sputtering monomer radicals VUV radiation energetic particles target nano cluster etching surf. diff.
8 Plasma Polymerization Control of wetting properties by O 2 /HMDSO coatings PDMS O 2 /HMDSO CH 3 CH 3 adv. contact angle [ ] SiOC:H films quartz HC 3 Si CH 3 O Si CH 3 CH 3 The residual C concentration also scales with the crosslinking and thus the permeability rel. carbon concentration [at%]
9 Plasma Sputtering Nanoscaled metallization of fibers Development of electrically conducting, anti-static fibers: - metallization with Ag, Al, Ti etc. - homogeneous coatings - textile properties are unaffected SEM 100 µm SEM medical textiles, occupational safety & health, wellbeing metal-coated multifilament ρ = Ω/cm (coated) ρ ~ Ω/cm (non-coated)
10 Nanofibers by Electrospinning Influence of solvent and voltage 250 nm 180 nm 2.5% PEO in H 2 O, 15 kv 7 % PEO in H 2 O, 15 kv 7 % PEO in H 2 O, 25 kv Faraday cage syringe pump (ml/h) High voltage DC supply 5-30 kv variable V precursor solution A and B (eg dissolved polymers) metal electrode possible application air filtration Nanofiber nano-fibrous web on fabric Rotating tubular shaped counter electrode for fiber collection (mat)
11 Nanostructuring of Surfaces Nano particles embedded in wet-chemical coatings SEM pictures 10 µm 5 µm possible application stain repellency 1 µm 0.5 µm
12 Nanostructuring of Surfaces Coating failure with a high content of nano particles SEM pictures
13 Nanostructuring of Surfaces Abrasion of nano particle containing coatings SEM pictures
14 Nanostructuring of Surfaces Abrasion of nano particle containing coatings 170 CA H 2 O without NP high content of NP low content of NP A suitable content of nano particle incorporation can enhance the abrasion resistance of water repellent coatings abrasion cycles Martindale test
15 schoeller Switzerland Patented technology NanoSphere it s naturally selfcleaning
16 Incorporation of Nano Particles into Fibers Handling of nano particles + dispersion granulate NP e.g. flame synthesis compound granulate melt spinning + drawing SiO 2 : stiffness ZnO: UV blocking agent TiO 2 : photocatalysis Ag: anti-odor, antimicrobial agent nano clay: FR CNT: strength, FR
17 Bi-component Fiber Spinning Core/sheath structures loaded with nano particles nano particle degradable polymer durable polymer possible applications Drug release; Flame retardancy
18 Ag Nano Particles and Coatings Wound dressings, socks, underwear etc.
19 Nano Particle Containing Plasma Coatings Combination of plasma CVD and PVD plasma polymerization + sputtering monomer etching radicals VUV radiation energetic particles surf. diff. target nano cluster? in-situ incorporation of nano particles ( nm)
20 Ag/PEO-like Coatings Anti-microbial treatment 10 µm 10 µm adhesion of P. aeruginosa on native PVC non-fouling Ag/PEO-like surface D.J. Balazs et al., in: Plasma Processes and Polymers, ed. R. d Agostino et al., Wiley-VCH, Weinheim, 2005, p. 351.
21 Ag/PEO-like Coatings Incorporation of silver nanoparticles plasma copolymerization: embedding of Ag particles (by sputtering) into a plasmapolymerized PEO-like matrix germicidal properties of Ag + ions in swollen state Ag-S- HS- inhibition hydrogenof hydrogen transfer transfer Ag-S- HS- D.J. Balazs et al., in: Plasma Processes and Polymers, ed. R. d Agostino et al., Wiley-VCH, Weinheim, 2005, p. 351.
22 Functionalized Coatings Retention of functional groups during plasma deposition C O OH N H H O C CH 2 H C OH CH 2 CH 2 O specific functionalization nanoscaled coatings with accessible functional groups within nano-porous structure
23 Deposition of Nano Porous Coatings Functionalized coatings amino-functionalized (65 nm thick) carboxy-functionalized (45 nm thick)? nano porous structure (<30 nm)
24 Functionalized Coatings Dyeing of plasma coatings on textile fabrics untreated plasma activated plasma coating 50 nm PET Stability: > cycles in Martindale test dyestuff: Sandolan walk blue N-GLN 180
25 Functionalized Coatings Substrate independent dyeing plasma-treated untreated CA PP cotton PA PET acid wool dye cationic dye
26 Plasma Reactors Continuous Empa St.Gallen demonstration of industrial scale-up Web coater width = 65 cm velocity = m/min RF + MW, magnetron sputtering one-step processing (of 3 processes) Fiber coater mono- and multifil fibers ( mm) velocity = m/min RF, magnetron sputtering one-step processing (of 2 processes)
27 Applications dyeability reinforced composites hydrophobicity metallizations biocompatibility moisture/heat management D. Hegemann, A. Fischer, D.J. Balazs, Textilveredlung 3/4, 2005, 14.
28 Outlook Functional Textiles thanks to Nanotechnology %Nano particles in use: SiO 2 : nano structuring? stain repellence Ag: incorporation? anti-bacterial treatment nano clay: incorporation? flame retardance %Nanoscaled coatings %Nanoporous coatings? container systems
29 Acknowledgment Laboratory for Functional Fibers and Textiles %Group Plasma-modified Surfaces contact Dawn Balazs, Ratnesh Thapliyal, Martin Amberg, Armin Fischer, Mokbul Hossain, Michael Keller, Dirk Hegemann %M. Heuberger, R. Hufenus, A. Ritter, G. Fortunato, J. Lübben, P. Furrer, M. Halbeisen, F. Reifler %CTI Bern for funding
2. Deposition process
Properties of optical thin films produced by reactive low voltage ion plating (RLVIP) Antje Hallbauer Thin Film Technology Institute of Ion Physics & Applied Physics University of Innsbruck Investigations
Nanoparticle Deposition on Packaging Materials by the Liquid Flame Spray
Nanoparticle Deposition on Packaging Materials by the Liquid Flame Spray Hannu Teisala a, Mikko Tuominen a, Mikko Aromaa b, Jyrki M. Mäkelä b, Milena Stepien c, Jarkko J. Saarinen c, Martti Toivakka c
Photolithography. Class: Figure 12.1. Various ways in which dust particles can interfere with photomask patterns.
Photolithography Figure 12.1. Various ways in which dust particles can interfere with photomask patterns. 19/11/2003 Ettore Vittone- Fisica dei Semiconduttori - Lectio XIII 16 Figure 12.2. Particle-size
Coating Technology: Evaporation Vs Sputtering
Satisloh Italy S.r.l. Coating Technology: Evaporation Vs Sputtering Gianni Monaco, PhD R&D project manager, Satisloh Italy 04.04.2016 V1 The aim of this document is to provide basic technical information
How To Make A Plasma Control System
XXII. Erfahrungsaustausch Mühlleiten 2015 Plasmaanalyse und Prozessoptimierung mittels spektroskopischem Plasmamonitoring in industriellen Anwendungen Swen Marke,, Lichtenau Thomas Schütte, Plasus GmbH,
OPTIMIZING OF THERMAL EVAPORATION PROCESS COMPARED TO MAGNETRON SPUTTERING FOR FABRICATION OF TITANIA QUANTUM DOTS
OPTIMIZING OF THERMAL EVAPORATION PROCESS COMPARED TO MAGNETRON SPUTTERING FOR FABRICATION OF TITANIA QUANTUM DOTS Vojtěch SVATOŠ 1, Jana DRBOHLAVOVÁ 1, Marian MÁRIK 1, Jan PEKÁREK 1, Jana CHOMOCKÁ 1,
Conductivity of silicon can be changed several orders of magnitude by introducing impurity atoms in silicon crystal lattice.
CMOS Processing Technology Silicon: a semiconductor with resistance between that of conductor and an insulator. Conductivity of silicon can be changed several orders of magnitude by introducing impurity
Ion Beam Sputtering: Practical Applications to Electron Microscopy
Ion Beam Sputtering: Practical Applications to Electron Microscopy Applications Laboratory Report Introduction Electron microscope specimens, both scanning (SEM) and transmission (TEM), often require a
1. PECVD in ORGANOSILICON FED PLASMAS
F. FRACASSI Department of Chemistry, University of Bari (Italy) Plasma Solution srl SURFACE MODIFICATION OF POLYMERS AND METALS WITH LOW TEMPERATURE PLASMA OUTLINE METAL TREATMENTS 1 low pressure PECVD
PLASMA TECHNOLOGY OVERVIEW
PLASMA TECHNOLOGY OVERVIEW Plasmas are not a lab curiosity. Plasma processing has been an essential production tool for more than 30 years in the fabrication of microelectronic devices for example. Over
Focused Ion beam nanopatterning: potential application in photovoltaics
Focused Ion beam nanopatterning: potential application in photovoltaics Research Infrastructure: Location: FIB-Focused Ion Beam ENEA Portici (Italy) Date March, 26 2013 Speakers: Vera La Ferrara, ENEA
Formation of Oriented Fibers Using Injection of PEO Solutions inside Electric Fields Defined by Two Parallel Suspended Electrodes
06 (43)-AF:Modelo-AF 8/20/11 6:41 AM Page 122 Formation of Oriented Fibers Using Injection of PEO Solutions inside Electric Fields Defined by Two Parallel Suspended R. Furlan 1, J. A. M. Rosado 2, A. N.
Applications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT)
I Applications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT) Table of Content 1 Introduction...1 2 Improved Properties...1 3 Potential Applications...1 3.1 Current / short-term applications...3
Combustion chemical vapor deposition
V I P Combustion chemical vapor deposition A technology to improve adhesion on surfaces to be coated Volkmar J. Eigenbrod, Christina Hensch, Alexander Kemper Introduction Combustion chemical vapor deposition
Novel inkjettable copper ink utilizing processing temperatures under 100 degrees C without the need of inert atmosphere
Novel inkjettable copper ink utilizing processing temperatures under 100 degrees C without the need of inert atmosphere Printed Electronics Europe April 7-8, 2009 Dresden, Germany Dr. Zvi Yaniv Applied
SBO3 acntb s. NANOFORCE Next generation nano-engineered Polymer-Steel/CNT Hybrids. Lightweight and multi-functional. aligned Carbon Nanotube bundles
NANOFORCE Next generation nano-engineered Polymer-Steel/CNT Hybrids SBO3 acntb s Lightweight and multi-functional aligned Carbon Nanotube bundles Jin Won (Maria) Seo User Committee Meeting Nanoforce, 7
Advantages Of A New And Advanced Nanofiber Coating Technology For Filtration Media Compared to The Electrospinning Process
Advantages Of A New And Advanced Nanofiber Coating Technology For Filtration Media Compared to The Electrospinning Process John Wertz Immo Schnieders Abstract Research and development of nanofibers has
Coating of TiO 2 nanoparticles on the plasma activated polypropylene fibers
Coating of TiO 2 nanoparticles on the plasma activated polypropylene fibers Renáta Szabová*, Ľudmila Černáková, Magdaléna Wolfová, Mirko Černák a Department of Plastics and Rubber, Institute of Polymer
Deposition of Silicon Oxide, Silicon Nitride and Silicon Carbide Thin Films by New Plasma Enhanced Chemical Vapor Deposition Source Technology
General Plasma, Inc. 546 East 25th Street Tucson, Arizona 85713 tel. 520-882-5100 fax. 520-882-5165 and Silicon Carbide Thin Films by New Plasma Enhanced Chemical Vapor Deposition Source Technology M.
and LUMINOUS CHEMICAL VAPOR DEPOSITION INTERFACE ENGINEERING HirotsuguYasuda University of Missouri-Columbia Columbia, Missouri, U.S.A.
LUMINOUS CHEMICAL VAPOR DEPOSITION and INTERFACE ENGINEERING HirotsuguYasuda University of Missouri-Columbia Columbia, Missouri, U.S.A. MARCEL MARCEL DEKKER. NEW YORK DEKKER Contents Preface iii Part I.
Improving Printability of Functional Materials by. Laboratory of Paper Coating and Converting Martti Toivakka and Jouko Peltonen
Improving Printability of Functional Materials by Controlled Substrate Topography and Chemistry Laboratory of Paper Coating and Converting Martti Toivakka and Jouko Peltonen Printed functionality & Paper
Plasma Electronic is Partner of. Tailor-Made Surfaces by Plasma Technology
Precision Fair 2013 Stand 171 Plasma Electronic is Partner of Tailor-Made Surfaces by Plasma Technology Dr. J. Geng, Plasma Electronic GmbH Modern Surface Technology in 1900 Overview A short introduction
Damage-free, All-dry Via Etch Resist and Residue Removal Processes
Damage-free, All-dry Via Etch Resist and Residue Removal Processes Nirmal Chaudhary Siemens Components East Fishkill, 1580 Route 52, Bldg. 630-1, Hopewell Junction, NY 12533 Tel: (914)892-9053, Fax: (914)892-9068
h e l p s y o u C O N T R O L
contamination analysis for compound semiconductors ANALYTICAL SERVICES B u r i e d d e f e c t s, E v a n s A n a l y t i c a l g r o u p h e l p s y o u C O N T R O L C O N T A M I N A T I O N Contamination
THIN FILM MATERIALS TECHNOLOGY
THIN FILM MATERIALS TECHNOLOGY Sputtering of Compound Materials by Kiyotaka Wasa Yokohama City University Yokohama, Japan Makoto Kitabatake Matsushita Electric Industrial Co., Ltd. Kyoto, Japan Hideaki
Setas Color Center 2014 Business Unit Presenta5on
Setas Color Center 2014 Business Unit Presenta5on Overview About Setaş Kimya Sanayi A.Ş. Overview Markets and Business Units q Textile dyes and chemicals q Denim dyes and chemicals q Paper dyes and chemicals
Consumer exposure to silver (nanoparticles) in consumer products
Consumer exposure to silver (nanoparticles) in consumer products Natalie von Goetz ETH Zurich, Institute of Chemical and Bioengineering The blue man Paul Karason after 15 years of oral intake of colloidal
Plasma Cleaner: Physics of Plasma
Plasma Cleaner: Physics of Plasma Nature of Plasma A plasma is a partially ionized gas consisting of electrons, ions and neutral atoms or molecules The plasma electrons are at a much higher temperatures
Microstockage d énergie Les dernières avancées. S. Martin (CEA-LITEN / LCMS Grenoble)
Microstockage d énergie Les dernières avancées S. Martin (CEA-LITEN / LCMS Grenoble) 1 Outline What is a microbattery? Microbatteries developped at CEA Description Performances Integration and Demonstrations
Neuere Entwicklungen zur Herstellung optischer Schichten durch reaktive. Wolfgang Hentsch, Dr. Reinhard Fendler. FHR Anlagenbau GmbH
Neuere Entwicklungen zur Herstellung optischer Schichten durch reaktive Sputtertechnologien Wolfgang Hentsch, Dr. Reinhard Fendler FHR Anlagenbau GmbH Germany Contents: 1. FHR Anlagenbau GmbH in Brief
Results Overview Wafer Edge Film Removal using Laser
Results Overview Wafer Edge Film Removal using Laser LEC- 300: Laser Edge Cleaning Process Apex Beam Top Beam Exhaust Flow Top Beam Scanning Top & Top Bevel Apex Beam Scanning Top Bevel, Apex, & Bo+om
T.M.M. TEKNIKER MICROMACHINING
T.M.M. TEKNIKER MICROMACHINING Micro and Nanotechnology Dapartment FUNDACION TEKNIKER Avda. Otaola. 20 Tel. +34 943 206744 Fax. +34 943 202757 20600 Eibar http://www.tekniker.es TMM FACILITIES -Clean Room
NANO SILICON DOTS EMBEDDED SIO 2 /SIO 2 MULTILAYERS FOR PV HIGH EFFICIENCY APPLICATION
NANO SILICON DOTS EMBEDDED SIO 2 /SIO 2 MULTILAYERS FOR PV HIGH EFFICIENCY APPLICATION Olivier Palais, Damien Barakel, David Maestre, Fabrice Gourbilleau and Marcel Pasquinelli 1 Outline Photovoltaic today
Surface Treatment of Titanium
Surface Treatment of Titanium Christiane Jung KKS Ultraschall AG, Steinen SZ The Tribology of Precision Swiss Tribology Meeting SBB Centre Löwenberg in Murten, Switzerland 16. November 2007 1 Outline:
Enhancement of Breakdown Strength and Energy Density in
Electronic Supplementary Material (ESI) for RSC Advances. This journal is The Royal Society of Chemistry 2014 Electronic Supplementary Information Enhancement of Breakdown Strength and Energy Density in
Electron Beam Technology for Pressure Sensitive Adhesive Applications
Electron Beam Technology for Pressure Sensitive Adhesive Applications Introduction Stephen C. Lapin, Ph.D. PCT Engineered Systems LLC Davenport, IA, USA Initial reports on the use of ultraviolet (UV) and
FRAUNHOFER INSTITUTe For
FRAUNHOFER INSTITUTe For surface engineering and thin films MOCCA + PROCESS AUTOMATION & OPTICAL MONITORING MOCCA + Automate your thin film coating process In many thin film coating processes various factors
HIGH PERFORMANCE THERMOPLASTIC COMPOSITE PROCESSING AND RECYCLING: FROM CRADLE TO CRADLE
HIGH PERFORMANCE THERMOPLASTIC COMPOSITE PROCESSING AND RECYCLING: FROM CRADLE TO CRADLE MAXIME ROUX 1, NICOLAS EGUÉMANN, LIAN GIGER, CLEMENS DRANSFELD Fachhochschule Nordwestschweiz (FHNW), Institut für
Composite Materials. Mary P. Shafer. Fabric Development, Inc. Quakertown, PA 18951
Composite Materials Mary P. Shafer Fabric Development, Inc. Quakertown, PA 18951 Composite Material Two inherently different materials that when combined together produce a material with properties that
Basic Properties and Application of Auto Enamels
Basic Properties and Application of Auto Enamels Composition of Ceramic Automotive Glass Enamels Ceramic automotive glass colours are glass enamels that fire on to the glass during the bending process
Identity, grouping and characterisation of silver based biocidal active substances including nano-silver
Identity, grouping and characterisation of silver based biocidal active substances including nano-silver Ulrike Frank Swedish Chemical Agency February 2012 Identity, grouping and characterisation of silver
Barrier Coatings: Conversion and Production Status
Transparent SiO 2 Barrier Coatings: Conversion and Production Status E. Finson and J. Felts, Airco Coating Technology, Concord, CA Keywords: Permeation barrier coatings; Reactive evaporation; SiO 2 ABSTRACT
Introduction to VLSI Fabrication Technologies. Emanuele Baravelli
Introduction to VLSI Fabrication Technologies Emanuele Baravelli 27/09/2005 Organization Materials Used in VLSI Fabrication VLSI Fabrication Technologies Overview of Fabrication Methods Device simulation
Lecture 11. Etching Techniques Reading: Chapter 11. ECE 6450 - Dr. Alan Doolittle
Lecture 11 Etching Techniques Reading: Chapter 11 Etching Techniques Characterized by: 1.) Etch rate (A/minute) 2.) Selectivity: S=etch rate material 1 / etch rate material 2 is said to have a selectivity
A Remote Plasma Sputter Process for High Rate Web Coating of Low Temperature Plastic Film with High Quality Thin Film Metals and Insulators
A Remote Plasma Sputter Process for High Rate Web Coating of Low Temperature Plastic Film with High Quality Thin Film Metals and Insulators Dr Peter Hockley and Professor Mike Thwaites, Plasma Quest Limited
Radiation Curable Components and Their use in Hard, Scratch Resistant Coating Applications
Radiation Curable Components and Their use in Hard, Scratch Resistant Coating Applications William Schaeffer Steven Tyson Indu Vappala Robert Kensicki Sartomer USA, LLC 502 Thomas Jones Way Exton, PA 19343
Flocking of textiles. Flocked shirt 13. flocking drying cleaning. adhesive. application. creation
Flocking of textiles > The motif flocking is the high-class alternative to textile printing. One not only flocks sports wear for schools, sport clubs, associations etc., but also fabrics for garments,
Light management for photovoltaics. Ando Kuypers, TNO Program manager Solar
Light management for photovoltaics Ando Kuypers, TNO Program manager Solar Global energy consumption: 500 ExaJoule/Year Solar irradiation on earth sphere: 5.000.000 ExaJoule/year 2 Capturing 0,01% covers
NON-WOVEN COMPOSITE OFFICE PANEL
NON-WOVEN COMPOSITE OFFICE PANEL Patent Number: US7871947 Publication date: 2011-01-18 Applicant(s): Milliken Provided herein is a non-stratified, or homogeneous, non-woven composite having (a) strength-imparting
Are these noise cancelling devices needed to make your chiller quiet??
Are these noise cancelling devices needed to make your chiller quiet?? Not on this chiller! Some sound barriers should never be broken. Government authorities recommend that exposure to loud noise over
Functional and Energy Efficient Textile Coating Systems
Functional and Energy Efficient Textile Coating Systems F. Terzioglu, E. Rohleder, M. Rabe Research Institute for Textile and Clothing (FTB), Hochschule Niederrhein Functional and Energy Efficient Textile
Feasibility study on polyparylene deposition in a PECVD reactor
Institute of Experimental and Applied Physics Feasibility study on polyparylene deposition in a PECVD reactor E. v. Wahl 1, C Kirchberg 2, M. Fröhlich 3, H. Kersten 1 1 IEAP, Group Plasma Technology, University
Light management for photovoltaics using surface nanostructures
Light management for photovoltaics using surface nanostructures Roberta De Angelis Department of Industrial Engineering and INSTM, University of Rome Tor Vergata New Materials For Optoelectronics webnemo.uniroma2.it
For Touch Panel and LCD Sputtering/PECVD/ Wet Processing
production Systems For Touch Panel and LCD Sputtering/PECVD/ Wet Processing Pilot and Production Systems Process Solutions with over 20 Years of Know-how Process Technology at a Glance for Touch Panel,
Coating Thickness and Composition Analysis by Micro-EDXRF
Application Note: XRF Coating Thickness and Composition Analysis by Micro-EDXRF www.edax.com Coating Thickness and Composition Analysis by Micro-EDXRF Introduction: The use of coatings in the modern manufacturing
Project No. (FKZ) 3707 61 301/05 UBA-FB 001337. Summary. by Dr. Sonja Martens Dr. Bernd Eggers Thorsten Evertz Golder Associates GmbH, Celle
TEXTE 34/2010 ENVIRONMENTAL RESEARCH OF THE FEDERAL MINISTRY OF THE ENVIRONMENT, NATURE CONSERVATION AND NUCLEAR SAFETY Project No. (FKZ) 3707 61 301/05 UBA-FB 001337 Applications of Nanomaterials in Environmental
Surface activation of plastics by plasma for adhesion promotion
Surface activation of plastics by plasma for adhesion promotion Uwe Stöhr, Ph. D. 1 Introduction In many fields a good adhesion between two materials is necessary. The adhesion should exist at the whole
Nanofabrication using anodic alumina templates. IFIMUP and IN Institute of Nanoscience and Nanotechnology
Nanofabrication using anodic alumina templates João Pedro Araújo IFIMUP and IN Institute of Nanoscience and Nanotechnology Outline Template based nanofabrication Nanoporous alumina templates Template filling
III. Wet and Dry Etching
III. Wet and Dry Etching Method Environment and Equipment Advantage Disadvantage Directionality Wet Chemical Solutions Atmosphere, Bath 1) Low cost, easy to implement 2) High etching rate 3) Good selectivity
CHAPTER 2 EXPERIMENTAL. g/mol, Sigma-Aldrich, Germany. 2.1.2 Magnesium acetate tetrahydrate (C 4 H 6 MgO. 4 4H 2 O), assay 99.0%,
CHAPTER 2 EXPERIMENTAL 2.1 Chemicals and Equipments 2.1.1 Zinc naphthenate (2(C 11 H 7 O 2 ). Zn), assay
CAPITOLO III MATERIALI ASSEMBLATI E AUTOASSEMBLATI. Photonics and Biophotonics Organics Synthesis - PhoBOS
CAPITOLO III MATERIALI ASSEMBLATI E AUTOASSEMBLATI 1 Outline and motivation SA mono and multilayers on silica and silicon native oxide The chemistry of the process the effect of moisture the effect of
State of the art in reactive magnetron sputtering
State of the art in reactive magnetron sputtering T. Nyberg, O. Kappertz, T. Kubart and S. Berg Solid State Electronics, The Ångström Laboratory, Uppsala University, Box 534, S-751 21 Uppsala, Sweden D.
Contamination. Cleanroom. Cleanroom for micro and nano fabrication. Particle Contamination and Yield in Semiconductors.
Fe Particles Metallic contaminants Organic contaminants Surface roughness Au Particles SiO 2 or other thin films Contamination Na Cu Photoresist Interconnect Metal N, P Damages: Oxide breakdown, metal
Ultra-high Barrier Plastic. MSE5420 Flexible Electronics Martin Yan, GE Global Research
Ultra-high Barrier Plastic MSE5420 Flexible Electronics Martin Yan, GE Global Research Outline Introduction to plastic substrate and need for barrier Barrier technologies WVTR measurement technologies
Picosun World Forum, Espoo 9.6.2009. 35 years of ALD. Tuomo Suntola, Picosun Oy. Tuomo Suntola, Picosun Oy
35 years of ALD Conventional methods for compound film deposition Heat treatment Final crystallization Nucleation Vacuum evaporation Sputtering CVD Buildup of thin film in source controlled deposition
Le nanotecnologie: dal Laboratorio al Mercato. Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia
Le nanotecnologie: dal Laboratorio al Mercato Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia Materials & Processes for micro nanotechnologies Laboratory http://www.polito.it/micronanotech
Nanoparticle Inks for Printed Electronics
NanoMas Technologies, Inc Nanoparticle Inks for Printed Electronics Zhihao Yang President & CTO NanoMas Technologies, Inc. [email protected] Technology Revolutions in Electronics for the Past
Use of Carbon Nanoparticles for the Flexible Circuits Industry
Use of Carbon Nanoparticles for the Flexible Circuits Industry Ying (Judy) Ding, Rich Retallick MacDermid, Inc. Waterbury, Connecticut Abstract FPC (Flexible Printed Circuit) has been growing tremendously
Materials for Organic Electronic. Jeremy Burroughes FRS FREng
Materials for Organic Electronic Applications Jeremy Burroughes FRS FREng Introduction Organic Thin Film Transistors Organic Solar Cells and Photodiodes All Printed OLED Summary 4k2k 56 Displays Panasonic
Demonstration of sub-4 nm nanoimprint lithography using a template fabricated by helium ion beam lithography
Demonstration of sub-4 nm nanoimprint lithography using a template fabricated by helium ion beam lithography Wen-Di Li*, Wei Wu** and R. Stanley Williams Hewlett-Packard Labs *Current address: University
Chemical Sputtering. von Kohlenstoff durch Wasserstoff. W. Jacob
Chemical Sputtering von Kohlenstoff durch Wasserstoff W. Jacob Centre for Interdisciplinary Plasma Science Max-Planck-Institut für Plasmaphysik, 85748 Garching Content: Definitions: Chemical erosion, physical
Plasma Treatment for the Production of High Added Value Textiles
Plasma Treatment for the Production of High Added Value Textiles E. Fatarella 1, S. Bani 1, I. Cioni 1, U. Goransson 2, P. Van Hess 2 1 Next Technology Tecnotessile Società Nazionale di Ricerca r.l., Prato
DIN V 18035-7 Sports Grounds; Part 7: Synthetic Turf Areas June 2002
INSTITUT FÜR SPORTBODENTECHNIK DIPL. ING. H.J. KOLITZUS Accredited by DIN CERTCO and IAAF September 2002 DIN V 18035-7 Sports Grounds; Part 7: Synthetic Turf Areas June 2002 Comments on the new 2002 version
High Rate Oxide Deposition onto Web by Reactive Sputtering from Rotatable Magnetrons
High Rate Oxide Deposition onto Web by Reactive Sputtering from Rotatable Magnetrons D.Monaghan, V. Bellido-Gonzalez, M. Audronis. B. Daniel Gencoa, Physics Rd, Liverpool, L24 9HP, UK. www.gencoa.com,
Challenges and. Opportunities of. Digital Printing. Andreas Koch Managing Director Digital Division
Challenges and Opportunities of Digital Printing Andreas Koch Managing Director Digital Division Contents Why digital printing? The Marabu way Ink technologies Case study 2 Why digital printing? You can
Performance of Carbon-PTFE Electrodes and PTFE Separators in Electrochemical Double Layer Capacitors (EDLCs)
Performance of Carbon-PTFE Electrodes and PTFE Separators in Electrochemical Double Layer Capacitors (EDLCs) David Zuckerbrod, Robert Sassa, Marianne Szabo, Meagan Mizenko Abstract: W. L. Gore & Associates
Outline. Self-assembled monolayer (SAM) formation and growth. Metal nanoparticles (NP) anchoring on SAM
From functional nanostructured surfaces to innovative optical biosensors Giacomo Dacarro Dipartimento di Fisica A.Volta Dipartimento di Chimica Generale Università degli Studi di Pavia Dalla scienza dei
RAINBOW: A NOVEL VISCOSE FIBER FOR PES BLENDS INNOVATIONS IN DYEING TECHNOLOGY
22 RAINBOW: A NOVEL VISCOSE FIBER FOR PES BLENDS INNOVATIONS IN DYEING TECHNOLOGY Peter Sulek, Marina Crnoja-Cosic, Jörg Schlangen Lenzing Aktiengesellschaft, A-486 Lenzing, Austria Phone: (43) (7672)
ZETA POTENTIAL ANALYSIS OF NANOPARTICLES
ZETA POTENTIAL ANALYSIS OF NANOPARTICLES SEPTEMBER 2012, V 1.1 4878 RONSON CT STE K SAN DIEGO, CA 92111 858-565 - 4227 NANOCOMPOSIX.COM Note to the Reader: We at nanocomposix have published this document
High performance. Architectural glazings utilise thin. low-emissivity coating. Coating technology
Coating technology High performance low-emissivity coating Growing concern with energy efficiency has sparked the development of double low-emissivity coatings in architectural glass. BOC Coating has designed
Electromouillage réversible sur nanofils de silicium superhydrophobes
Electromouillage réversible sur nanofils de silicium superhydrophobes EWOD: Electro Wetting On Dielectrics Rabah Boukherroub 1,2 N. Verplanck, 2 G.Piret 1,2 Y. Coffinier, 1,2 E. Galopin, 2 V. Thomy, 2
SAST II - Novel Electrochemical Scaffolding Technique for SAST
SAST II - Novel Electrochemical Scaffolding Technique for SAST Luigi De Nardo [email protected] Dipartimento di Chimica, Materiali e Ingegneria Chimica G. Natta Outline 1. Why scaffolding in medicine?
Overview of Filtration Media Classes, Their Properties, and Applications in Which They Excel
Overview of Filtration Media Classes, Their Properties, and Applications in Which They Excel Dr. Heath Himstedt John Simenson Johns Manville Next Generation Filter Media Conference American Filtration
The Focused Ion Beam Scanning Electron Microscope: A tool for sample preparation, two and three dimensional imaging. Jacob R.
The Focused Ion Beam Scanning Electron Microscope: A tool for sample preparation, two and three dimensional imaging Jacob R. Bowen Contents Components of a FIB-SEM Ion interactions Deposition & patterns
Dr Marcin Adamiak marcin.adamiak. www.imiib.polsl.pl/
FP7 NMP/INCO Brokerage Event Warsaw, 17-18 September 2009 Dr Marcin Adamiak marcin.adamiak [email protected] http://www.imiib.polsl.pl www.imiib.polsl.pl/ Institute of Engineering Materials and Biomaterials
Electrophoretic Gold Nanoparticles Depostion On Carbon Nanotubes For NO 2 Sensors
European Network on New Sensing Technologies for Air Pollution Control and Environmental Sustainability - EuNetAir COST Action TD1105 2 nd International Workshop EuNetAir on New Sensing Technologies for
Comprehensive Investigation of Sequential Plasma Activated Si/Si Bonded Interface for Nano-integration
Comprehensive Investigation of Sequential Plasma Activated Si/Si Bonded Interface for Nano-integration M G Kibria, F Zhang, T H Lee, M J Kim and M M R Howlader Dept. Electrical and Computer Engineering,
Tecnologie convenzionali nell approccio top-down; I: metodi e problematiche per la deposizione di film sottili
LS Scienza dei Materiali - a.a. 2005/06 Fisica delle Nanotecnologie part 8 Version 4, Dec 2005 Francesco Fuso, tel 0502214305, 0502214293 - [email protected] http://www.df.unipi.it/~fuso/dida Tecnologie
Deposition of Thin Metal Films " (on Polymer Substrates)!
Deposition of Thin Metal Films " (on Polymer Substrates)! Shefford P. Baker! Cornell University! Department of Materials Science and Engineering! Ithaca, New York, 14853! MS&E 5420 Flexible Electronics,
THIN FILM DEPOSITION TECHNIQUES STEPS TOWARDS MORE SUSTAINABLE PACKAGES
THIN FILM DEPOSITION TECHNIQUES STEPS TOWARDS MORE SUSTAINABLE PACKAGES Mika Vähä Nissi 1, Terhi Hirvikorpi 1, Tuomas Mustonen 1, Maarit Karppinen 2, Ali Harlin 1 1 VTT Technical Research Centre of Finland,
Drill Pipe Hard-facing
Drill Pipe Hard-facing GLOBAL PROTECTION AGAINST WEAR AND TEAR Oxyacetylene Rods Flux- and Metal Cored Wires Electrodes PTA - Welding Oxyacetylene Welding and Spray Powders Flame Spraying FLSP Arc Spraying
Best Practices for Handling Nanomaterials in Laboratories
Best Practices for Handling Nanomaterials in Laboratories Much of the toxicology of nanomaterials is currently uncertain or unknown. Some nanosized particles are more toxic than their respective micron
Active Nanocomposite Materials
Active Nanocomposite Materials Contact: Prof. Jorma Jokiniemi ([email protected]) The aim of this project was to develop tailored functional nanocomposite materials for industrial applications. The
Nano Materials Synthesis, Characterisation and Properties
Nano Materials Synthesis, Characterisation and Properties Prof. Dr. Cordt Zollfrank Wissenschaftszentrum Weihenstephan Wissenschaftszentrum Straubing Prof. Dr. Johann Plank/ Department Chemie Technische
JOURNAL INTEGRATED CIRCUITS AND SYSTEMS, VOL 1, NO. 3, JULY 2006. 39
JOURNAL INTEGRATED CIRCUITS AND SYSTEMS, VOL 1, NO. 3, JULY 2006. 39 Self-Assembled Polystyrene Micro-Spheres Applied for Photonic Crystals and Templates Fabrication Daniel S. Raimundo 1, Francisco J.
Mask Cleaning Processes and Challenges
Mask Cleaning Processes and Challenges Brian J. Grenon Grenon Consulting, Inc. 92 Dunlop Way Colchester, VT 05446 Phone: 802-862-4551 Fax: 802-658-8952 e-mail [email protected] Mask Supply Workshop
Pattern & device transfer processes
Journée Trans GDR «Micronanomanipulation pour les micro et nano systèmes» Besançon, 11 Avril 2012 Pattern & device transfer processes A. Bosseboeuf 1*, G. Schelcher 1, V. Beix 1,2, S. Brault 2, S. Nazeer
Laser hole drilling and texturing (for joining) of composites
AILU Workshop: Laser processing of polymer, metal and cerramic composites Laser hole drilling and texturing (for joining) of composites Dr Paul French Photonics in Engineering Research Group General Engineering
Rapid Prototyping and Development of Microfluidic and BioMEMS Devices
Rapid Prototyping and Development of Microfluidic and BioMEMS Devices J. Sasserath and D. Fries Intelligent Micro Patterning System Solutions, LLC St. Petersburg, Florida (T) 727-522-0334 (F) 727-522-3896
