Network Install Guide

Transcription

1 Network Install Guide

2 IMPORTANT: READ THIS BEFORE PERFORMING A PRINT AUDIT ANALYSIS INSTALLATION Print Audit Analysis is a desktop application that you must install on every computer where you want to track printing. Users installing Print Audit Analysis must have Administrator rights, or you must use third-party tools that can install software in a locked down environment. Installing Print Audit Analysis across a network requires knowledge of the network design, user rights and technologies available in your organization. Print Audit supplies various tools to aid in the network rollout of Print Audit software but these tools are meant to complement your organization's current desktop software rollout procedures. If you do not have an established way to rollout software in your organization then we strongly advise that you develop a software rollout plan for all desktop software before attempting to roll out Print Audit software. Overview Print Audit allows you to install its components quickly and easily across your entire network of computers. This document outlines the basic steps needed to mass install Print Audit and what mass installation technologies Print Audit supports. Step 1: Administrator Install We highly recommend doing your first installation manually on the person s computer who is going to be administering Print Audit. This will allow you to create your database and configure Print Audit for operation. This also allows you the opportunity to familiarize yourself with Print Audit s features and gain access to the help files for general reference. If you do not do this step, you may not be able to successfully do your network install.

3 Step 2: Creating the Network Installation Print Audit has an option built right into its install tool called Create a Network Install. When you choose this option the installation program asks you a series of questions about the type of install you want to do.

4 1. Selecting a Network Install Path The installer asks you to select a network install path. Print Audit will copy all necessary install files into the directory you choose. You must choose a directory accessible to everyone on your network, usually through a network share. If your computers do not have access to this directory, you will not be able to successfully mass install Print Audit.

5 2. Selecting the Install Directory This step asks you to choose the directory on the end-user s computer where you want to install the Print Audit software. Generally you can leave this as the default. If you need to install it on a different drive or directory on all your user s computers, change the setting as needed.

6 3. Enter your Database Settings In this step, you set your database information. This is the location and TCP/IP port to use to connect to the Print Audit Data Server. Please ensure this information is correct! If not, users will not be able to successfully connect to the database and no job information will be tracked.

7 4. Advanced Install Options In these steps you need to select some advanced options as to how you want the install to behave. If you are not one hundred percent sure what an option does, we highly recommend leaving the default. Here are the available options: Create Start Menu Icons If checked, the install creates Start Menu icons for the Analysis client. If unchecked, it does not.

8 Create the Uninstall Information If checked, the installer creates the necessary entries on the computer so that the software can be easily uninstalled. If unchecked you cannot uninstall the software through scripts or on the desktop. You will have to manually delete files and registry entries to remove it. Uncheck this option at your own risk. 5. Create the Network Install After filling in all steps, the installation program will create your network install. It copies all required files for the install into the directory you selected for the network install. The next step is to customize the silent network installation files. Step 4: Customizing the Silent Network Installation Files When you create your custom network install, Print Audit copies several critical files into the custom network install directory you chose. Here is a list of the files created. 1. Configuration File (painst.cfg) This file (painst.cfg) contains the settings you chose while answering questions during the creation of your network install. This is a text file arranged as a standard INI file. You can edit this file with Notepad and make changes directly to it. Please be careful making changes to this file. For detailed documentation on each setting in these files as well as optional settings you can add in manually, look for the silent install topic in your Print Audit help files index. You may want to double-check this file for any errors. The most critical issue has to do with the database settings. If these are wrong they are difficult to change later.

9 2. Silent Install Batch File (pasilent.bat) This file (pasilent.bat) is the file responsible for running the Print Audit installation in silent mode. When running in silent mode the installer reads the settings you entered in the configuration file and installs Print Audit with no interaction necessary from the user. There is detailed documentation in the pasilent.bat file, please read this information carefully before altering this file. The key to the pasilent.bat file is to ensure the following line is set properly: SET PAINSTPATH=[Your net install path directory] You need to set this line to the path of the Print Audit network install directory. If you do not have this path set properly Print Audit will not read your configuration file and the install will not work as you have anticipated. 3. Silent Uninstall Batch File (pauninst.bat) This file allows you to silently uninstall Print Audit from your users computers. Just like the silent install batch file you must ensure the following line is set properly: SET PAINSTPATH=[Print Audit install directory] The directory you set should be the SHORT path version of your end user s Print Audit installation directory. For example, if you keep the default install paths this should be: C:\PROGRA~1\PRINTA~1 If Print Audit cannot find this directory then Print Audit will not uninstall. Keep in mind that if you chose not to create un-installation information when you created your install, this file will not uninstall Print Audit. 4. Sleep Command File (sleep.exe) This file is a simple DOS utility to cause the computer to pause for a few seconds. The batch files call this command; you do not need to do anything with it. 5. Print Audit Silent MSI Wrappers (PAInstallWrap.msi, PAUninstallWrap.msi) These files are Windows Installer MSI wrappers that call the pasilent.bat and pauninst.bat files respectively. Print Audit provides this file so you can distribute Print Audit using Active Directory. Please see the section Distributing the Silent Network Install in this document for more information. Step 5: Testing and Troubleshooting the Silent Network Install The next step is to test to ensure the pasilent.bat file successfully installs Print Audit the way you want on an individual s workstation. We recommend going to a user s computer who does not have Print Audit installed, navigating to the network install directory and manually running the pasilent.bat file by double-clicking on it. If everything works the way you expect you can then distribute Print Audit across your network. Please note that Print Audit will not automatically run the client after the install is complete when running in silent mode. You will have to reboot the computer after manually running the install to make sure everything with the install finishes correctly.

10 Common Problems and Their Solutions 1. Database settings are incorrect If the database settings are wrong, IE: Print Audit asks for a database when you run it or says it cannot connect, check your database settings in the configuration file (painst.cfg), and doublecheck the SET PAINSTPATH line in your pasilent.bat to ensure it is correct. 2. The wrong components are installed This is caused by an incorrect configuration file or the SET PAINSTPATH line is incorrect. Please double-check these settings in the painst.cfg file. For more information on the contents of this file please see the silent installation topic in your Print Audit help files. 3. Database settings are correct, but I still get database connection errors Ensure the Print Audit Data Server is running and that its port and location settings match the ones in the painst.cfg file Step 6: Distributing the Silent Network Install Once the silent installation is working properly you need to decide how you want to distribute it across your network. This is entirely dependent on your network and the tools you have available but here are the most common ways along with their advantages and pitfalls. 1. Login Scripts The easiest way to run the pasilent.bat file to get the install going is to include it in a standard Windows login script. This works great for networks that are running Win95/98 or where your users have local Administrator rights on their computers. The Print Audit installs need permission to create directories, create registry keys and in some cases copy files into areas that can be locked down for users with restricted permissions. 2. Active Directory Managed Software Packages Print Audit provides two files, PAInstallWrap.msi and PaUninstallWrap.msi that you can assign as managed software packages using group policies in Active Directory. These files simply call the pasilent.bat and pauninst.bat files respectively. Using the MSI packages and Active Directory allow the Print Audit installs to run at system level security when a computer boots up so that users do not need to have elevated permissions. The downfall of this approach is that this will not install software to older operating systems, so if you have a mix of operating systems in your organization you will have use a combination of this approach and login scripts. As well your organization must have knowledge of group policies and distributing software in this environment. The msi packages are to be used at your discretion. For more information on using Group Policies with Active Directory to install software, please refer to your Microsoft server help files or Microsoft s website. 3. Third Party Installation Tools There are third party tools your organization may have for the distribution of software across your network. These tools include SMS from Microsoft and ZenWorks. If you have one of these tools in your organization then you can use it to run the pasilent.bat or create your own installation batch files using ours as a basis.

11 Conclusion Print Audit provides a simple, easy to use system of configuration files and batch files to allow you to quickly rollout our software to your network. As the customer however only you know the requirements and idiosyncrasies of your network and computers so how you choose to do the installation is ultimately up to you.