WR and HERM Applications: CR Applications:

Transcription

1

2 WR and HERM Applications: Carts, Transporters & Gurneys Chemical Processing Equipment Chimneys, Scrubbers & Vessels Electronic Cabinets Navigation Equipment Over-the-road Transport Power Plant Piping Suspension Pump, Generator & Compressor Isolation Seismic Isolation Shipping Cases, Skids & Containers Transportable Shelters CR Applications: Audio/ Visual Equipment Catering Carts Communications Packages Medical Devices Sensitive Electronic Equipment Security Cameras Hard Drives / CD-ROM Drives Electronics Production

3 Table of Contents Product Selection Company Overview New Technologies and Enhancements General Standard Wire Rope Products Overview Sizing Information/Application Worksheet WR Compact Overview Sizing Information/Application Worksheet CR HERM (High Energy Rope Mounts) Overview Sizing Information/Application Worksheet HR Custom Engineered Products WEAR Pipe Restraints Overview Wire Mesh Isolator Overview WR CR HR Custom Enidine, a preferred source for energy absorption and vibration isolation solutions, offers a full range of Wire Rope, Compact Wire Rope Isolator and HERM (High Energy Rope Mount) products, each designed to reduce the harmful effects of shock and vibration. Need Assistance? Enidine is ready to answer your questions, feel free to contact us at: Phone: Toll Free Direct Fax: General Industrial Aerospace [email protected] [email protected] [email protected] U.S. Patents,9,8,9,7,,79 Online: Tel.: Solutions in Energy Absorption and Vibration Isolation

4 Company Overview Company Overview Enidine Incorporated Overview With its world headquarters located in Orchard Park, New York, USA, ENIDINE Incorporated is a world leader in the design and manufacture of standard and custom energy absorption and vibration isolation product solutions within the Industrial, Aerospace, Defense, Marine and Rail markets. Product ranges include shock absorbers, gas springs, rate controls, air springs, wire rope isolators, heavy industry buffers and emergency stops. With facilities strategically located throughout the world and in partnership with our vast global network of distributors, Enidine Incorporated continues to strengthen its presence within marketplace. Founded in 9, Enidine Incorporated now has close to employees located throughout the globe in the United States, Germany, France, Japan, China and Korea. With a team of professionals in engineering, computer science, manufacturing, production and marketing our employees provide our customers the very best in service and application solutions. Enidine is widely recognized as the preferred source for energy absorption and vibration isolation products. From Original Equipment Manufacturers (OEM) to aftermarket applications, Enidine offers a unique combination of product selection, engineering excellence and technical support to meet even the toughest energy absorption application requirements. Global Manufacturing and Sales Facilities offer our customers: Highly Trained Distribution Network State-of-the Art Engineering Capabilities Custom Solution Development Customer Service Specialists Multiple Open Communication Channels If you are unsure whether one of our standard products meets your requirements, feel free to speak with one of our technical representatives toll-free at , or contact us via at [email protected]. Products/Engineering/Technical Support Enidine continually strives to provide the widest selection of shock absorbers and rate control products in the global marketplace. Through constant evaluation and testing, we bring our customers the most cost effective products with more features, greater performance and improved ease of use. [email protected] Tel.: ext. Fax: -7--

5 New Technologies and Enhancements Research and Development Enidine engineers continue to monitor and influence trends in the motion control industry, allowing us to remain at the forefront of new energy absorption and vibration isolation product development. Our experienced engineering team has designed custom solutions for a wide variety of challenging applications, including automated warehousing systems and shock absorbers for hostile industrial environments such as glass manufacturing, among others. These custom application solutions have proven to be critical to our customers success. Let Enidine engineers do the same for you. New Products and Services NEW Technology A talented engineering staff works to design and maintain the most efficient energy absorption product lines available today, using the latest engineering tools: Solid Modeling -D CAD Drawings -D Soluble Support Technology Finite Element Analysis Complete Product Verification Testing Facility Custom designs are not an exception at Enidine, they are an integral part of our business. Should your requirements fit outside of our standard product range, Enidine engineers can assist in developing special finishes, components, hybrid technologies and new designs to ensure a best-fit product solution customized to your exact specifications. Global Service and Support Enidine offers its customers a global network of customer service staff technical sales personnel that are available to assist you with all of your application needs. New product designs get to market fast because they can be fully developed in virtual environments before a prototype is ever built. This saves time and lets us optimize the best solution using real performance criteria. Operating with lean manufacturing and cellular production, Enidine produces higher quality custom and standard products with greater efficiency and within shorter lead times. An authorized Global Distribution Network is trained regularly by ENIDINE staff on new products and services ensuring they are better able to serve you. Global operations in United States, Germany, France, China, Japan and Korea. A comprehensive, website full of application information, technical data, sizing examples and information to assist in selecting the product that s right for you. Our website also features a searchable worldwide distributor lookup to help facilitate fast, localized service. Contact us today for assistance with all of your application needs. Our global customer service and technical sales departments are available to assist you find the solution that s right for your application needs. Call us at or us at [email protected] and let us get started today. [email protected] Tel.: ext. Fax: -7--

6 WR WR Series Overview U.S. Patents,9,8 Standard are comprised of stainless steel stranded cable threaded through aluminum alloy retaining bars that are mounted for effective shock and vibration isolation. With their corrosion resistant, all-metal construction, Enidine are environmentally stable, high-performance shock and vibration isolators that are unaffected by temperature extremes, chemicals, oils, ozone and abrasives. Featuring a patented crimping pattern, versatile mounting options and a variety of sizes, these helical isolator products can help ensure that your systems can effectively meet performance requirements in Commercial, Industrial, and Defense industries, including MIL-STD-8, MIL-STD-7, MIL-S-9D, MIL-E-, STANAG-, BV- and DEF-STND 7. For more information, please refer to our Wire Rope Isolator Sizing Information on pages - to assist you in selecting a model for your application. Solutions in Energy Absorption and Vibration Isolation Tel.:

7 WR Series Overview WR Crimp Crimped Mount Bar Wire Rope Cable Crimp Models (WR WR8): Enidine s patented crimp design lowers cost by using fewer mount bars when compared to the clamp design, no assembly hardware, and reduced assembly time. Clamp Mount Screw Outer Mount Bar Wire Rope Cable Inner Mount Bar Clamp Models (WR WR): Enidine s clamp bar models are constructed by clamping the wire rope between two fastened mount bars. Tel.: Solutions in Energy Absorption and Vibration Isolation

8 WR WR Series Materials and Finishes: Overview Standard: Optional: Special: Wire Rope: / Stainless Steel Mount Bars: -T Aluminum, Chemical Conversion Coated per MIL-C-, Class A Hardware: Alloy Steel per ASTM F8, Zinc Plated (WR WR Series) Thread: Stainless Self Clinching Insert (WR WR8 Series), Threaded Bar (WR WR Series) Wire Rope: Galvanized or Nylon Coated Stainless Mount Bars: -T Aluminum, Anodized per MIL-A-8, Type II, Class / Stainless Steel per ASTM A7, Passivated Hardware: / Stainless Steel (when stainless steel bars are specified) (WR WR) Threads: Stainless Steel Helical Inserts, Free Running or Self Locking (WR WR) Threaded Aluminum (WR WR8) Consult Enidine Isolator Options: Mounting: Loops: Enidine offers a full range of mounting combinations of thru-hole, countersunk, and threaded bars. All configurations are available in either Imperial or Metric styles. Add an M after the mounting option for Metric. Some models have reduced mounting options available due to limited fastener installation space. Consult Enidine if a preferred mounting configuration is not listed. Enidine s wire rope isolators can be purchased with the full number of loops, or as few as -Loops. The number of loops is indicated in the isolator part number. Performance is provided for full loop isolators. Performance for reduced loop isolators can be obtained by a simple ratio. Bellmouth: Performance: Enidine s wire rope isolators are available with a bellmouth option. The bellmouth feature includes mount bars with radii manufactured into the wire rope hole edges. This option is recommended for high fatigue applications. Add an R to the end of the part number. Stiffness (Kv or Ks): Wire rope isolators exhibit non-linear stiffness behavior. Small deflections, usually associated with vibration isolation, will have a different spring rate than larger shock deflections. Enidine publishes typical vibration stiffness values (Kv), and average shock stiffness values (Ks) within the catalog. These values can be used with the provided equations listed on Page to predict system performance. The stiffness values listed in the catalog are for full-loop versions. For reduced loop versions, ratio the stiffness by dividing the number of desired loops by the number of full loops. Isolator Axes: Wire rope isolators are multi-axis isolators. The diagram below includes load axis definitions and deflection considerations. COMPRESSION COMPRESSION/ROLL Damping: Typically -%, depending on size and input level. For specific damping considerations, please consult Enidine. Mounting Orientation: The diagrams below illustrate typical mounting orientations. FIXED SHEAR (for ) FIXED ROLL COMPRESSION COMPRESSION/ROLL FIXED SHEAR FIXED ROLL Stabilizers: (for ) Stabilizers are used to control deflections of tall supported masses. Stabilizers are typically recommended when the height equals -times the width or depth dimension. In most applications, the quantity of stabilizers required are half as many as the base isolators, and selected one size softer than the base isolators. Solutions in Energy Absorption and Vibration Isolation Tel.:

9 WR Series Application Worksheet WR APPLICATION WORKSHEET - INPUTS IMPERIAL/METRIC PART I: SYSTEM DATA:. Total Supported Load ( WT): WT = lbs.. Number of Isolators (n): n = WT = Kg x 9.8 = N IMPERIAL METRIC. Static Load per Isolator (W): W = WT n W = lbs.* W = N* * Assumes a central CG. Load Axis: Compression Load Axis Load Axis Shear or Roll º Compression/Roll PART II: VIBRATION SIZING:. Input Excitation Frequency (ƒi) = Hz ( = rpm ). System Response Natural Frequency for 8% isolation: ƒ n = ƒ i. = Hz. Maximum Isolator Vibration Stiffness: (K v ) K v = W (π ƒ n ) K v = lbs./in. K v = N/m g. Select an isolator by comparing calculated values with technical data for the desired load axis provided in tables for each isolator. a.) Calculated W must be less than the isolator s max static load and b.) Isolator s vibration stiffness must be less than the calculated maximum K v PART III: SHOCK SIZING: g = 8 in/sec or 9.8 m/sec. Maximum Allowable Transmitted Acceleration: A T = G s. Shock Input Velocity: V = in./sec. V = m/sec. Free Fall Impact: V = gh g = 8 in./sec. or 9.8 m/sec. h = Drop Height (in. or m) V. Min. Isolator Response Deflection: D min = g(a ) T D min = in. D min = m W(V/D min ). Maximum Isolator Shock Stiffness: K s = K g s = lbs./in. K s = N/m. Select an isolator by comparing calculated values with technical data for the desired load axis provided in tables for each isolator. a.) Calculated W must be less than the isolator s max static load and b.) Calculated D min must be less than the isolator s max deflection Note: Metric deflections are calculated in meters (m) and technical data is in millimeters (mm). and c.) Isolator s shock stiffness must be less than calculated maximum K s V. Check actual deflection using K s from technical data K s (Isolator)g to ensure that the isolator s max deflection is D actual = not exceeded. W D actual = in. D actual = m 7. If isolator s max deflection is exceeded, select another isolator and repeat steps and. Tel.: Solutions in Energy Absorption and Vibration Isolation

10 WR WR Series. X.(79,) 7 X.9. (8,). X.. (,).9 X MOUNTING Mounting HOLES Holes See Mounting Options Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W "W" X..7 (,) 9. ø. ø.88 (,).7 H "H" (Ref) Size Height Width (Ref) Unit Weight Thru Hole Thread C sink Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) WR-.7 (8). (). (,) B, D, E WR-.8 (). (8). (,) WR-. () ±.. ().7 (,) Ø.8 ±. #8- UNC 8º A, B, C, D, E, S WR-. (8) (±,). ().7 (,) (Ø,7 ±,) (M X,7) (9º) WR-7. (). ().7 (,) WR-8. (). (8).7 (,) Model Number Ordering Code WR - - D T M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: * [ ] - / Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric For C sink and Threaded Options Threaded Hole Options:*[ ] - Flush Self Clinching Threaded Insert [ T ] - Tapped Maximum recommended torque for standard threaded insert is in.-lbs. (,7 Nm) Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) Mounting Options: Number of Loops: Isolator Size: See Chart (Reduced Number of Loops Available) See Sizing Table U.S. Patent,9,8 * Standard features. Any non-standard items may require longer lead times. Call for quotation. 7 Solutions in Energy Absorption and Vibration Isolation Tel.:

11 WR Series Static Load vs. Deflection Compression WR--. (7). (8,) () () WR-- 8. ().8 (9,7) () 9 () WR-- 7. ().8 (,7) 9 (7) (8,8) WR--. (7).7 (7,8) 7 () (,) WR-7-. ().7 (8,8) () (,) WR-8-. ().8 (,8) (7,9) (,9) WR º Compression/Roll WR-- 7. (). (,7) () (,) WR--. ().8 (,7) 8 () (7,) WR--. ().8 (,8) () 7 (,7) WR--. (8).98 (,9) (7,) 7 (,) WR-7-. (8). (,9) (,) (,) WR-8-. (). (,) (,) (,9) Shear/Roll WR--. (). (8,) 8 () 8 () WR--. (8). (,7) (8,8) (8,8) WR--. (). (,7) (,) (,) WR--. ().7 (8,8) (,9) (,9) WR-7-. ().78 (9,8) 8 (,) 8 (,) WR-8-. ().9 (,9) (,) (,) Note: Performance provided for full loop models with standard (/) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. Tel.: Solutions in Energy Absorption and Vibration Isolation 8

12 WR WR Series. (,).9 (,). (,7) X Mounting Holes See Mounting Options Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W. (,) ø.9 (,) H Size Height Width (Ref) Unit Weight Thru Hole Thread C sink Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) WR- WR-.9 (). (). (8). (). (,). (,7) B, D, E WR-. (8) ±.. (). (,7) Ø. ±. #- UNF 8º WR-. () (±,). (8). (,7) A, B, C, D, E, S (Ø, ±,) (M X,8) (9º) WR-7. (). (). (,7) WR-8. (8).7 ().8 (,8) Model Number Ordering Code WR - - D T M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - / Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: Add M for Metric *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated For C sink and Threaded Options Thread Thread Thru D E S Thread C sink Thru Threaded Hole Options:*[ ] - Flush Self Clinching Threaded Insert [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking [ T ] - Tapped Mounting Options: See Chart Maximum recommended torque for standard threaded insert is 8 in.-lbs. (,9 Nm) Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) U.S. Patent,9,8 Number of Loops: Isolator Size: (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. 9 Solutions in Energy Absorption and Vibration Isolation Tel.:

13 WR Series Static Load vs. Deflection Compression WR-- 9 (8). (8,) 7 () () WR-- 7 (7). (,7) 9 () 7 () WR-- (). (,7) (7) (9) WR-- ().7 (7,8) () () WR-7-9 ().8 (,8) (8) (7,9) WR-8-9 ().9 (,9) 9 () (7,) WR º Compression/Roll WR-- (). (,7) (8) () WR-- (). (,7) (8) 8 () WR-- ().7 (8,8) () (9,) WR-- 8 (). (,9) 7 () (,) WR-7-7 (). (7,9) () (,) WR-8- (7). (,) (9,) (,) Shear/Roll WR-- ().8 (9,7) () () WR-- 9 (). (,7) (8) (8) WR-- 7 (). (,7) 7 () 7 () WR-- (7).7 (8,8) (7,) (7,) WR-7- ().8 (,8) (,) (,) WR-8- (8).9 (,9) (,) (,) Note: Performance provided for full loop models with standard (/) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

14 WR WR Series. (7,). (,). (,) X Mounting Holes See Mounting Options Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W. (7,9) ø. (,) (Ref) H Size Height Width (Ref) Unit Weight Thru Hole Thread C sink Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) WR-. (8). (). (,) WR-. (). (8). (,) B, D, E WR-. (). ().9 (,) ±. WR-. ().7 ().9 (,) Ø.7 ±. /- UNC 8º (±,) WR-. (8).8 ().9 (,) A, B, C, D, E, S (Ø,9 ±,) (M X,) (9º) WR-7. ().9 (8). (,) WR-8.7 (). (). (,) Model Number Ordering Code WR - - D T M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - / Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: Add M for Metric *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated For C sink and Threaded Options Thread Thread Thru D E S Thread C sink Thru Threaded Hole Options:*[ ] - Flush Self Clinching Threaded Insert [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking [ T ] - Tapped Mounting Options: See Chart Maximum recommended torque for standard threaded insert is in.-lbs. (,7 Nm) Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) U.S. Patent,9,8 Number of Loops: Isolator Size: (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Solutions in Energy Absorption and Vibration Isolation Tel.:

15 WR Series Static Load vs. Deflection 7 Compression WR-- 8 ().8 (9,7) 88 () (9) WR-- (9). (,7) 7 () 9 (8) WR-- 7 (). (,7) (9) 9 () WR-- (). (,8) (78) (9) WR-- ().7 (8,8) 8 (7) 8 () WR-7- ().8 (,8) (7) () 7 WR-8- (7).9 (,9) () () WR º Compression/Roll 7 WR-- (9). (,7) 9 (8) () WR-- (8).8 (7,) (7) () WR-- 7 (8).78 (9,8) () () WR-- ().9 (,9) () () WR-- (). (,9) (9) 9 () WR-7- (9). (,) 8 () 7 () 7 WR-8-9 (8). (,) () () Shear/Roll WR-- ().8 (9,7) () () WR-- (98). (,7) () () WR-- (9).8 (,7) 7 () 7 () WR-- 9 (8).7 (7,8) () () WR-- 8 (8).78 (9,8) (9) (9) WR-7- (7).9 (,9) 9 () 9 () 7 WR-8- (). (,9) 7 () 7 () 7 Note: Performance provided for full loop models with standard (/) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

16 WR WR Series. (7,). (,). (,) X Mounting Holes See Mounting Options Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W. (7,9) ø. (,) (Ref) H Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) WR-. (). (). (,) B, D, E ±. WR-. ().7 (). (,) (±,) WR-. (8).9 (8). (,) Ø.7 ±. /- UNC 8º A, B, C, D, E, S WR-8.8 () ±.. ().8 (,7) (Ø,9 ±,) (M X,) (9º) WR-9. () (±,). ().9 (,8) Model Number Ordering Code WR - - D T M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - / Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: Add M for Metric *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated For C sink and Threaded Options Thread Thread Thru D E S Thread C sink Thru Threaded Hole Options:*[ ] - Flush Self Clinching Threaded Insert [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking [ T ] - Tapped Mounting Options: See Chart Maximum recommended torque for standard threaded insert is 8 in.-lbs. (, Nm) Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) U.S. Patent,9,8 Number of Loops: Isolator Size: (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Solutions in Energy Absorption and Vibration Isolation Tel.:

17 WR Series Static Load vs. Deflection Compression WR-- 8 (). (,7),7 () 7 (7) WR-- 9 (9).8 (,7) 97 (7) (88) WR-- 8 (7).78 (9,8) () () WR-8-8 ().98 (,9) 8 (8) (7) WR-9-9 (7). (,) (8) () WR º Compression/Roll WR-- 7 ().7 (7,8) 7 () () WR-- 9 (8).8 (,8) (9) () WR-- (8). (7,9) 7 () (8) WR-8- (). (,) 7 (8) (8) WR-9- ().7 (,7) 7 () () Shear/Roll WR-- (78). (,7) (7) (7) WR-- (). (,7) () () WR-- ().8 (,8) 9 () 9 () WR-8- (). (,9) () () WR-9-9 (). (,) (7,9) (7,9) Note: Performance provided for full loop models with standard (/) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

18 WR WR Series. X.(7,). X (,). X. (,).9 X MOUNTING Mounting HOLES Holes See Mounting Options X.8.7 (9,) 9. Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W "W" ø.88 ø (,8).7 H "H" (Ref) Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) WR-. (). (). (,9) D WR-. (). (8). (,) WR-. (). (). (,) B, D, E ±. WR-. (8).7 ().7 (,) (±,) WR-. ().8 ().9 (,) Ø.7 ±. /- UNC 8º WR-7.7 ().9 (8). (,) (Ø,9 ±,) (M X,) (9º) WR-8. (). (8).7 (,) A, B, C, D, E, S WR-8. ().9 (7).9 (,7) ±. WR-9. (). (88). (,8) (±,) WR-9. (8). (7). (,9) Model Number Ordering Code WR - - D T M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - / Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: Add M for Metric *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated For C sink and Threaded Options Thread Thread Thru D E S Thread C sink Thru Threaded Hole Options:*[ ] - Flush Self Clinching Threaded Insert [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking [ T ] - Tapped Mounting Options: See Chart Maximum recommended torque for standard threaded insert is 8 in.-lbs. (, Nm) Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) U.S. Patent,9,8 Number of Loops: Isolator Size: (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Solutions in Energy Absorption and Vibration Isolation Tel.:

19 WR Series Static Load vs. Deflection Compression WR-- (7). (8,), (78),7 () WR-- (7). (,7), (), () WR-- (). (,7),98 (7),8 (89) WR-- (78). (,7),7 () 87 () WR-- ().7 (8,8),9 () 7 (7) WR-7- (89).8 (,8), () (9) 7 WR-8-8 (). (,9) 77 () (8) 8 WR-8- (). (9,) 7 (8) 9 () 9 WR-9- (78). (,) () () WR-9-7 ().8 (,8) (9) () WR º Compression/Roll WR-- (). (,7),9 (), (79) WR-- (). (,8),7 (8) 7 () WR-- 97 ().78 (9,8), (97) (9) WR-- 9 (9).9 (,9) 98 (7) (7) WR-- 8 (7). (,9) 8 () (8) WR-7-79 (). (9,) 7 () 8 (9) 7 WR-8-8 (). (8,) (77) (8) 8 WR-8- (77). (,7) 8 (9) (8) 9 WR-9- (). (,) 9 () () WR-9- (9).9 (7,7) (8) (.) Shear/Roll WR-- 8 (). (8,),8 (),8 () WR-- 8 (). (,7) 89 () 89 () WR-- 7 ().8 (,7) () () WR-- 7 (). (,8) (9) (9) WR-- (89).78 (9,8) (7) (7) WR-7- (7).8 (,8) () () 7 WR-8- (). (7,9) () () 8 WR-8- (8). (,) () () 9 WR-9-9 (). (8,) (,) (,) WR-9- (). (,9) (,) (,) Note: Performance provided for full loop models with standard (/) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

20 WR WR8 Series.7 (,). (,). (,9) X Mounting Holes See Mounting Options. (,7) Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W ø. (,) (Ref) H Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) WR8-.9 (8). ().8 (,8) WR8-. (). ().9 (,) ±. WR8-. (9).8 (7).9 (,) (±,) WR8-. (). (8). (,7) Ø.7 ±. /-8 UNF 8º A, B, C, D, E, S WR8-7. (). (89). (,) (Ø,9 ±,) (M X,) (9º) WR8-8. (7).7 (9). (,) ±. WR8-8. (7).9 (). (,7) (±,8) WR8-9. (8). (8). (,9) WR Model Number Ordering Code D T M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - / Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: Add M for Metric *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated For C sink and Threaded Options Thread Thread Thru D E S Thread C sink Thru Threaded Hole Options:*[ ] - Flush Self Clinching Threaded Insert [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking [ T ] - Tapped Mounting Options: See Chart Maximum recommended torque for standard threaded insert is 8 in.-lbs. (, Nm) Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) U.S. Patent,9,8 Number of Loops: Isolator Size: 8 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. 7 Solutions in Energy Absorption and Vibration Isolation Tel.:

21 WR8 Series Static Load vs. Deflection 8 7 Compression WR (778).7 (7,8),8 (8), (8) WR8--8 (7).9 (,9), () () WR8--8 (). (9,), (9) (79) WR8--8 (). (,) 8 () () WR (8). (,) 7 (7) 9 () WR (). (.) (9) () 7 WR (). (.) 7 () (9) 8 WR (97). (,8) (7) () WR º Compression/Roll 8 7 WR8--8 (). (,9), () (89) WR8--8 (7). (,) 8 () (8) WR (9). (9,) (9) () WR ().8 (,7) 9 (8) 7 () WR8-7-8 (7).8 (,7) (7) () WR8-8-8 (8). (,8) () () 7 WR8-8-8 (9). (,8) () (9) 8 WR (9).8 (7,) () 7 () Shear/Roll 7 8 WR ().7 (8,8) () () WR ().98 (,9) (7) (7) WR ().8 (,) 8 (9) 8 (9) WR8--8 (). (,) (7) (7) WR8-7-8 (). (,) 8 () 8 () WR8-8-8 (). (8,) () () 7 WR8-8-8 (78). (8,) () () 8 WR8-9-8 ().8 (,8) 9 () 9 () Note: Performance provided for full loop models with standard (/) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. Tel.: Solutions in Energy Absorption and Vibration Isolation 8

22 WR WR Series -Loop.7 (,). ±. (9, ±.8). (,).7 (,). (,) 8X Mounting Holes See Mounting Options Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W. (,) (Ref) ø.7 (9,) (Ref) H Size Height Width (Ref) Unit Weight Thru Hole Thread C sink Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) WR-.8 (7). (8).8 (,8) WR-.9 (7). (89).88 (,8) WR-. (7). ().99 (,9) ±. +. Ø.8 WR-. (8). (8).9 (,9) -. /-8 UNF 8º (±,) A, B, C, D, E, S WR-. (89). (8). (,98) (Ø7, +, (M X,) (9º) ) WR-7. ().7 (). (,7) -,8 WR-8. (8). ().8 (,) WR - - Model Number Ordering Code D H M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - / Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric For C sink and Threaded Options Threaded Hole Options:*[ ] - Tapped [ H] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking Maximum recommended torque for threaded bar in.-lbs. ( Nm) Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) Mounting Options: Number of Loops: Isolator Size: See Chart (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. 9 Solutions in Energy Absorption and Vibration Isolation Tel.:

23 WR Series -Loop WR Static Load vs. Deflection 7... Compression WR-- ( 9). (,),7 (7) 77 () WR-- ( ). (7,),7 () () WR-- 8 (8).8 (,), (8) 8 (8) WR-- (7).7 (,7) 88 () 9 (8) WR-- (7).9 (9,8) 78 (7) () WR-7-89 (9). (,) 7 () () 7 WR-8-7 ().8 (8,) 9 () (9) º Compression/Roll WR-- (89).88 (7,8), (77) (77) WR-- 8 (8). (,8) 89 () 8 (7) WR-- (7). (,9) 8 () 8 (9) WR-- ().8 (,) 9 () () WR-- ().8 (7,) (9) () WR-7-77 (). (9,9) () 9 () 7 WR-8- (8).7 (9.) () 7 () Shear/Roll WR-- (89). (,) (98) (98) WR-- (). (9,) 8 (8) 8 (8) WR-- (89). (,) (8) (8) WR-- (7).8 (7,) 8 (9) 8 (9) WR-- ().8 (,8) () () WR-7- ().8 (8,) () () 7 WR-8- ().8 (7,) 8 () 8 () Note: Performance provided for full loop models with standard (/) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

24 WR WR Series 8. ±. (,9 ±,8). (,).7 (,).7 (,). (,) X Mounting Holes See Mounting Options Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W. (,) (Ref) ø.7 (9,) (Ref) H Size Height Width (Ref) Unit Weight Thru Hole Thread C sink Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) WR-.8 (7). (8). (,) WR-.9 (7). (89). (,) WR-. (7). (). (,) ±. +. Ø.8 WR-. (8). (8).78 (,) -. /-8 UNF 8º (±,) A, B, C, D, E, S WR-. (89). (8).87 (,) (Ø9, +, ) *(M8 X,) (9º) -,8 WR-7. ().7 (). (,) WR-8. (8). (). (,) * Tapped M8 x., Inserts M x. WR - -8 Model Number Ordering Code D H M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - / Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric All Mounting Options Threaded Hole Options:*[ ] - Tapped [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking Maximum recommended torque for threaded bar is in.-lbs. ( Nm) Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) Mounting Options: Number of Loops: Isolator Size: See Chart 8 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Solutions in Energy Absorption and Vibration Isolation Tel.:

25 WR Series Static Load vs. Deflection WR Compression WR--8 ( 8). (,),9 (), (79) WR--8 ( 7). (7,),8 () 87 () WR--8 ( 8).8 (,),8 () () WR--8 (979).7 (,7),7 () (9) WR--8 (9).9 (9,8), (8) (79) WR-7-8 (). (,) 9 (8) 9 () 7 WR ().8 (8,) 8 (7) () º Compression/Roll WR--8 ( 79).88 (7,8), () 9 () WR--8 ( 9). (,8),9 (8) (88) WR--8 (89). (,9) 9 (9) 7 () WR--8 8 (8).8 (,) 78 (7) () WR--8 7 (778).8 (7,) 7 () 7 (7) WR-7-8 (7). (9,9) () () 7 WR (7).7 (9.) 7 (7) 9 () Shear/Roll WR--8 (9). (,) 7 () 7 () WR--8 9 (87). (9,) () () WR--8 (7). (,) (77) (77) WR--8 ().8 (7,) 7 () 7 () WR--8 ().8 (,8) () () WR-7-8 (7).8 (8,) (7) (7) 7 WR-8-8 ().8 (7,) (9) (9) Note: Performance provided for full loop models with standard (/) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

26 WR WR Series -Loop.7 (,) 7. ±. (77,8 ±,8).7 (,). (,). (,) 8X Mounting Holes See Mounting Options Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W.77 (9,) (Ref) ø. (,7) (Ref) H Size Height Width (Ref) Unit Weight Thru Hole Thread C sink Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) WR-. (7). (9). (,) WR-. (8). (). (,) WR-. (89). (). (,) +. Ø. WR-.7 (9) ±..7 ().8 (,7) -. /-8 UNF 8º A, B, C, D, E, S WR-7. (8) (±,). ().98 (,8) (Ø9, +. ) *(M8 X,) (9º) -,8 WR-8.9 (). (). (,) WR-8. (7). ().8 (,8) WR-9. () 7. (8). (,) * Tapped M8 x., Inserts M7 x. WR - - Model Number Ordering Code D H M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - / Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru A C sink B Thru C C Sink C sink Thread Mount Bar Options: *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric For C sink and Threaded Options Threaded Hole Options:*[ ] - Tapped [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking Maximum recommended torque for threaded bar is in.-lbs. ( Nm) Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) Mounting Options: Number of Loops: Isolator Size: See Chart (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Solutions in Energy Absorption and Vibration Isolation Tel.:

27 WR Series -Loop Static Load vs. Deflection 8 7 Compression WR-- ( 7). (,),9 (7), () WR-- ( 9). (8,), (), (9) WR-- 8 ( 7).7 (,), (),9 (8) WR-- 9 ( 7).9 (8,8),9 () 8 (7) WR-7- ( 8). (9,9), () 9 () WR-8-9 ( 9).9 (7,7), (9) (7) 7 WR-8- ( ).8 (8,9) 88 () () 8 WR-9- (9). (,) () (7) WR 7 8 º Compression/Roll WR-- ( 9).7 (,7), (), (77) WR-- ( ).8 (,8),7 (98) 7 () WR-- ( ). (,), () () WR-- 7 ( ).7 (8,), (9) (7) WR-7- ( ). (8,8) 8 () 9 () WR-8- (9). (,7) () (7) 7 WR-8-8 (8).8 (,9) (88) (8) 8 WR-9- ().7 (,8) () (9) Shear/Roll 7 WR-- ( 9). (,), (), () WR-- 7 ( ).8 (,) 89 () 89 () WR-- ( ).78 (,) 7 () 7 () WR-- (9). (,8) (9) (9) WR-7- (). (,9) () () WR-8- (). (77,7) () () 7 WR-8-7 ().8 (9,9) 9 () 9 () 8 WR-9- (). (7,7) () () 8 Note: Performance provided for full loop models with standard (/) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

28 WR WR Series 8. ±. (,9 ±,8). (,).7 (,).7 (,). (,) 8X Mounting Holes See Mounting Options Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W.77 (9,) (Ref) ø. (,7) (Ref) H Size Height Width (Ref) Unit Weight Thru Hole Thread C sink Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) WR-. (7). (9). (,8) WR-. (8). (). (,9) WR-. (89). (). (,) WR-.7 (9) ±..7 ().9 (,) +. /-8 UNF 8º A, B, C, D, E, S Ø. -. *(M8 X,) (9º) WR-7. (8) (±,). (). (,) WR-8.9 (). ().9 (,7) WR-8. (7). (). (,9) (Ø ) WR-9. () 7. (8).8 (,9) * Tapped M8 x., Inserts M7 x. WR - -8 Model Number Ordering Code D H M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - / Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric For C sink and Threaded Options Threaded Hole Options:*[ ] - Tapped [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking Maximum recommended torque for threaded bar is in.-lbs. ( Nm) Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) Mounting Options: Number of Loops: Isolator Size: See Chart 8 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Solutions in Energy Absorption and Vibration Isolation Tel.:

29 WR Series Static Load vs. Deflection 7 8 Compression WR--8 8 ( 8). (,), (9),9 (7) WR--8 8 ( 7). (8,), (78),9 () WR--8 ( 89).7 (,), (),9 (78) WR--8 ( ).9 (8,8), (7), (9) WR-7-8 ( 97). (9,9),9 () 78 (7) WR ( 7).9 (7,7),9 () (9) 7 WR-8-8 ( ).8 (8,9),8 (7) (7) 8 WR ( ). (,) 8 (8) 8 (9) WR º Compression/Roll 7 8 WR--8 8 ( 8).7 (,7),8 (9), () WR--8 8 ( 7).8 (,8),7 (98) 9 (8) WR--8 ( ). (,),99 (9) 79 (8) WR--8 ( ).7 (8,),8 (9) (98) WR-7-8 ( ). (8,8), (9) 9 (8) WR ( ). (,7) 8 (7) 8 (9) 7 WR-8-8 ( 8).8 (,9) 7 (7) (7) 8 WR (8).7 (,8) 7 (8) () Shear/Roll 7 8 WR--8 ( 9). (,),8 (9),8 (9) WR--8 8 ( 7).8 (,),8 (7),8 (7) WR--8 ( 7).78 (,) 99 (7) 99 (7) WR--8 7 ( ). (,8) 9 () 9 () WR (8). (,9) (8) (8) WR-8-8 (). (77,7) () () 7 WR-8-8 ().8 (9,9) () () 8 WR-9-8 (89). (7,7) 7 () 7 () Note: Performance provided for full loop models with standard (/) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

30 WR WR Series. ±. (,7 ±,8) 7. (9,). (,).7 (,). (,) 8X Mounting Holes See Mounting Options Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W.9 (7,) (Ref) ø. (,9) (Ref) H Size Height Width (Ref) Unit Weight Thru Hole Thread C sink Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) WR-. (89). (). (,) C, D WR-.9 (99). () 7. (,) WR-. ().7 () 7. (,) ±. +. Ø. WR-. (9). () 8. (,7) -. /8- UNF 8º (±,) A, B, C, D, E, S WR-7.7 (9). () 8.8 (,) (Ø, +, ) (M X,) (9º) -,8 WR-8. (7). () 9. (,) WR-9. () 7. (78). (,) WR - -8 Model Number Ordering Code D H M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - / Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru A C sink B Thru C C Sink C sink Thread Mount Bar Options: *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric For C sink and Threaded Options Threaded Hole Options:*[ ] - Tapped [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking Maximum recommended torque for threaded bar is in.-lbs. ( Nm) Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) Mounting Options: Number of Loops: Isolator Size: See Chart 8 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. 7 Solutions in Energy Absorption and Vibration Isolation Tel.:

31 WR Series Static Load vs. Deflection 7 Compression WR--8, ( ). (,8) 9,7 ( 7),8 (89) WR--8, ( 7). (8,) 7,9 ( 9),8 (9) WR--8, ( 7). (,9), ( ),88 () WR--8 9 ( ).9 (9,),9 (8), () WR ( ). (8,), (), () WR ( 8). (7,),9 (), (9) 7 WR-9-8 ( 8).9 (7,7), (7) 9 (9) WR º Compression/Roll 7 WR--8, ( 7).8 (,7), (9),9 (9) WR ( 98). (,), (7),7 () WR--8 8 ( 8). (9,7),8 (7), () WR--8 7 ( 98).8 (7,),7 (8), (77) WR-7-8 ( 9). (8,8), () 7 () WR-8-8 ( ).7 (9,), (8) (98) 7 WR-9-8 ( 979). (,), (8) (8) Shear/Roll WR ( ). (,),99 (),99 () WR--8 8 ( ). (,), (7), (7) WR--8 9 ( ).7 (,),7 (8),7 (8) WR--8 8 ( ). (,), (), () WR-7-8 ( ). (,) 87 () 87 () WR ( ).7 (9,9) 7 () 7 () 7 WR-9-8 (979). (7,) (98) (98) 7 Note: Performance provided for full loop models with standard (/) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. Tel.: Solutions in Energy Absorption and Vibration Isolation 8

32 WR WR8 Series. ±. (8, ±,8). (,7). (7,) 7. (9,). (8,) 8X Mounting Holes See Mounting Options Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W.8 (,) (Ref) ø.87 (,) (Ref) H Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) WR8-. (). () 8. (8,) C, D WR8-. (). (). (9,) +. Ø. WR8-. (9) ±. 7. (78).8 (9,9) -. /- UNC 8º A, B, C, D, E, S WR (9) (±,) 8. (). (,) (Ø, +, ) (M X,7) (9º) -,8 WR () 9. () 8. (,7) WR (). (8). (,9) WR Model Number Ordering Code D H M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - / Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric For C sink and Threaded Options Threaded Hole Options:*[ ] - Tapped [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking Maximum recommended torque for threaded bar 9 ft.-lbs. ( Nm) Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) Mounting Options: Number of Loops: Isolator Size: See Chart 8 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. 9 Solutions in Energy Absorption and Vibration Isolation Tel.:

33 WR8 Series WR Static Load vs. Deflection 8 8 Compression Lbs. (kn) in. (mm) Lbs./in. (kn/m) Lbs./in. (kn/m) WR8--8,7 (,8). (,8),9 ( ),77 ( ) WR8--8, (9,). (7,) 8, ( ), (8) WR8--8,9 (8,).9 (7,9) 7, ( 7),8 (9) WR8-8-8,7 (,). (,9),7 (8), () WR8-9-8, (,).9 (,7), (8), (8) WR (,7).9 (,7), (77) 79 (8) º Compression/Roll Lbs. (kn) in. (mm) Lbs./in. (kn/m) Lbs./in. (kn/m) WR8--8,9 (8,7).8 (7,) 7,7 ( 8),87 () WR8--8, (,7).8 (9,),9 (8), (89) WR8--8, (,). (,), (78), () WR8-8-8, (,).7 (,8), (8) 7 () WR (,) 7. (77,8),87 (7) (89) WR (,) 7. (77,8), () (7) Shear/Roll Lbs. (kn) in. (mm) Lbs./in. (kn/m) Lbs./in. (kn/m) WR8--8,8 (,). (,), (8), (8) WR (,).8 (7,), (), () WR8--8 (,89). (77,), (9), (9) WR8-8-8 (,). (8,) 9 () 9 () WR8-9-8 (,). (,) () () WR (,7). (,) (77) (77) Note: Performance provided for full loop models with standard (/) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

34 WR WR Series. ±. (,7 ±,8).87 (77,8). (8,). (9,9). (,8) 8X Mounting Holes See Mounting Options Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W.7 (,) (Ref) ø. (8,) (Ref) H Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) WR- 7. (78) 8. () (,9) +. ±. Ø.78 A, B, C, D, E, S -. /- UNC 8º WR- 8. () (±,) 9. () (,) (Ø9.8 +, ) (M8 X,) (9º) WR- 9. (). () (,) -,8 WR - -8 Model Number Ordering Code D H M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - / Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric For C sink and Threaded Options Threaded Hole Options:*[ ] - Tapped [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking Maximum recommended torque for threaded bar is ft.-lbs. ( Nm) Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) Mounting Options: Number of Loops: Isolator Size: See Chart 8 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Solutions in Energy Absorption and Vibration Isolation Tel.:

35 WR Series Static Load vs. Deflection Compression Lbs. (kn) in. (mm) Lbs./in. (kn/m) Lbs./in. (kn/m) WR--8,79 (,8). (7,), ( 7),9 ( ) WR--8, (,). (,9), ( 77), (8) WR--8,87 (,77).7 (9,) 8,8 ( ), () WR º Compression/Roll Lbs. (kn) in. (mm) Lbs./in. (kn/m) Lbs./in. (kn/m) WR--8,9 (,97).8 (9,) 8,8 ( ),9 (8) WR--8, (9,88).7 (,8),7 (99),7 (9) WR--8,79 (7,9). (8,9), (799),7 () Shear/Roll Lbs. (kn) in. (mm) Lbs./in. (kn/m) Lbs./in. (kn/m) WR--8, (,).8 (7,), (), () WR--8 8 (,). (8,), (), () WR--8 (,7).9 (,7),7 (7),7 (7) Note: Performance provided for full loop models with standard (/) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

36 WR WR Series. ±. (,7 ±,8).87 (77,8). (8,). (9,9). (,8) 8X Mounting Holes See Mounting Options Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W.7 (,) (Ref) ø. (,8) (Ref) H Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) WR- 7. (78) 8. () (,) +. Ø /- UNC 8º ±. (±.) A, B, C, D, E, S WR- 8. () 9.7 (8) (7,) (Ø9.8 +, ) (M8 X,) (9º) -,8 WR - -8 Model Number Ordering Code D H M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - / Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric For C sink and Threaded Options Threaded Hole Options:*[ ] - Tapped [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking Maximum recommended torque for threaded bar is ft.-lbs. ( Nm) Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) Mounting Options: Number of Loops: Isolator Size: See Chart 8 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Solutions in Energy Absorption and Vibration Isolation Tel.:

37 WR Series Static Load vs. Deflection Compression Lbs. (kn) in. (mm) Lbs./in. (kn/m) Lbs./in. (kn/m) WR--8,8 (,). (7,) 9,8 ( 8) 7, ( 8) WR--8,9 (7,).8 (9,),77 ( ), (78) WR º Compression/Roll Lbs. (kn) in. (mm) Lbs./in. (kn/m) Lbs./in. (kn/m) WR--8, (,).8 (9,), ( 98),79 () WR--8,79 (,). (7,) 7,7 ( ), (78) Shear/Roll Lbs. (kn) in. (mm) Lbs./in. (kn/m) Lbs./in. (kn/m) WR--8,87 (8,).8 (7,),79 (89),79 (89) WR--8, (,). (,),7 (8),7 (8) Note: Performance provided for full loop models with standard (/) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

38 CR Compact CR Series Overview Compact U.S. Patents,9,7,,79 Compact For the best in vibration isolation capabilities, choose Enidine s Compact. Smaller than traditional wire ropes, these unique isolators provide cost-effective, simultaneous shock and vibration attenuation where package space is at a premium. Enidine Compact feature an easy, single-point installation, which allows them to be installed in virtually any application. Their small size also permits the isolation of individual system components, making them ideal for use in sensitive equipment and electronics. Just as with our standard Enidine, Enidine Compact feature a patented, all-metal design and components that ensure maximum reliability, regardless of temperature or substrate requirement, and that can help meet MILSPECS similar to those of our Wire Rope Isolator series. Please refer to our Compact Wire Rope Isolator Sizing Information on pages 7-8 for more information. If your application is outside the standard Compact Wire Rope Isolator product range, please consult the standard Wire Rope Isolator or HERM portions of this catalog. If a standard solution is still not available, Enidine engineers can design an isolator to suit your specifications. For further information on Enidine Wire Rope, HERM and Compact Wire Rope Isolator products, technical assistance and pricing, please contact Enidine or your nearest authorized distributor. A list of Enidine distributors can be found by visiting our website at Solutions in Energy Absorption and Vibration Isolation Tel.:

39 Compact CR Series Overview CR Crimp Mounting Hole Top Mounting Bar CR CR Compact Bottom Mounting Bar Stainless Steel Cable Mounting Hole Stainless Steel Cable Top Mounting Bar CR CR Bottom Mounting Bar Tel.: Solutions in Energy Absorption and Vibration Isolation

40 CR Compact Compact CR Series Materials and Finishes: Standard: Wire Rope: / Stainless Steel Mount Bars: -T Aluminum, Chemical Conversion Coated per MIL-C-, Class A Threads: Tapped Optional: Mount Bars: -T Aluminum, Anodized per MIL-A-8, Type II, Class / Stainless Steel per ASTM A7, Passivated Special: Isolator Options: Mounting: Consult Enidine Enidine offers a full range of mounting combinations of thru-hole, countersunk, and threaded bars. All configurations are available in either Imperial or Metric styles. Add an M after the mounting option for Metric. Some models have reduced mounting options available due to limited fastener installation space. Consult Enidine if a preferred mounting configuration is not listed. Overview Bellmouth: The bellmouth feature includes mount bars with radii manufactured into the wire rope hole edges. This option is recommended for high fatigue applications. Compact rope models (CR CR) include this feature as the standard. Performance: Stiffness (Kv or Ks): Compact wire rope isolators exhibit non-linear stiffness behavior. Small deflections, usually associated with vibration isolation, will have a different spring rate than larger shock deflections. Enidine publishes typical vibration stiffness values (Kv), and average shock stiffness values (Ks) within the catalog. These values can be used with the provided equations listed on Page 8 to predict system performance. Isolator Axes: Compact wire rope isolators are multi-axis isolators. The diagram below includes load axis definitions and deflection considerations. COMPRESSION COMPRESSION/ROLL FIXED ROLL/SHEAR Damping: Typically -%, depending on size and input level. For specific damping considerations, please consult Enidine. Mounting Orientation: The diagrams below illustrate typical mounting orientations. COMPRESSION COMPRESSION/ROLL FIXED ROLL/SHEAR Stabilizers: Stabilizers are used to control deflections of tall supported masses. Stabilizers are typically recommended when the height equals -times the width or depth dimension. In most applications, the quantity of stabilizers required are half as many as the base isolators, and selected one size softer than the base isolators. 7 Solutions in Energy Absorption and Vibration Isolation Tel.:

41 Compact CR Series Application Worksheet CR APPLICATION WORKSHEET - INPUTS IMPERIAL/METRIC PART I: SYSTEM DATA:. Total Supported Load ( WT): WT = lbs.. Number of Isolators (n): n = WT = Kg x 9.8 = N. Static Load per Isolator (W): W = WT n W = lbs.* W = N* * Assumes a central CG. Load Axis: Compression Load Axis Load Axis Shear or Roll º Compression/Roll PART II: VIBRATION SIZING:. Input Excitation Frequency (ƒi) = Hz ( = rpm ). System Response Natural Frequency for 8% isolation: ƒ n = ƒ i = Hz. IMPERIAL METRIC Compact. Maximum Isolator Vibration Stiffness: (K v ) K v = W (π ƒ n ) K v = lbs./in. K v = N/m g. Select an isolator by comparing calculated values with technical data for the desired load axis provided in tables for each isolator. a.) Calculated W must be less than the isolator s max static load and b.) Isolator s vibration stiffness must be less than the calculated maximum K v PART III: SHOCK SIZING: g = 8 in/sec or 9.8 m/sec. Maximum Allowable Transmitted Acceleration: A T = G s. Shock Input Velocity: V = in./sec. V = m/sec. Free Fall Impact: V = gh g = 8 in./sec. or 9.8 m/sec. h = Drop Height (in. or m) V. Min. Isolator Response Deflection: D min = g(a ) T D min = in. D min = m. Maximum Isolator Shock Stiffness: W(V/D min ) K s = K s = lbs./in. K s = N/m g. Select an isolator by comparing calculated values with technical data for the desired load axis provided in tables for each isolator. a.) Calculated W must be less than the isolator s max static load and b.) Calculated D min must be less than the isolator s max deflection Note: Metric deflections are calculated in meters (m) and technical data is in millimeters (mm). and c.) Isolator s shock stiffness must be less than calculated maximum K s V. Check actual deflection using K s from technical data K s (Isolator)g to ensure that the isolator s max deflection is D actual = not exceeded. W D actual = in. D actual = m 7. If isolator s max deflection is exceeded, select another isolator and repeat steps and. Tel.: Solutions in Energy Absorption and Vibration Isolation 8

42 CR Compact CR Series Compact.8 (9,7). (,) H ø.7 (,) Ref. (Ref) H ø.7 Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W Ref. (Ref).. (,) TYP (Typ).8 (9,7). (,) Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) CR-. (7).7 (9). (,) CR-.7 (9) ±..79 (). (,) Ø. #- UNC 8º A, B, C, D, E, S CR-.9 () (±,).9 (). (,) (Ø,) (M X,) (9º) CR-. (). (). (,) CR - -DM P Model Number Ordering Code Mount Bar Options: *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated Mounting Options C sink C sink Thread A B C Thru C sink Thru Add M for Metric Mounting Options: For C sink and Threaded Options See Chart Thread C sink Thru D E S Thread Thread Thru Isolator Size: See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Maximum recommended torque for tapped aluminum bar is in.-lbs. (, Nm) Wire Rope Material: Stranded series stainless steel Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) U.S. Patent,9,7 9 Solutions in Energy Absorption and Vibration Isolation Tel.:

43 Compact CR Series Static Load vs. Deflection Compression CR-.7 (,). (,) (,9) (,9) CR-. (,). (8,) (,8) 7. (,) CR-. (,8).7 (,9) (,7). (,) CR-. (,).9 (,) 7. (,). (,9) CR Compact º Compression/Roll CR-. (,). (8,) (,). (,79) CR-. (,). (,9) 8. (,). (,) CR-.7 (,7).8 (,7). (,88). (,) CR-. (,9).7 (8,). (,).7 (,) Shear/Roll CR-. (,). (7,9). (,7). (,7) CR-. (,89).9 (9,9). (,). (,) CR-. (,7). (,). (,). (,) CR-. (,). (,).8 (,).8 (,) Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

44 CR Compact CR Series Compact.8 (9,7). (,) ) H ø. (,) Ref. (Ref) Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W Ref. (Ref).. (,) TYP (Typ).8 (9,7). (,) Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) CR-. ().78 (). (,7) CR-.7 (9) ±..8 (). (,) Ø. #- UNC 8º A, B, C, D, E, S CR-.89 () (±,).9 (). (,) (Ø.) (M X,) (9º) CR-.7 (7). (7). (,) CR - -DM P Model Number Ordering Code Mount Bar Options: *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated Mounting Options C sink C sink Thread A B C Thru C sink Thru Add M for Metric Mounting Options: For C sink and Threaded Options See Chart Thread C sink Thru D E S Thread Thread Thru Isolator Size: See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Maximum recommended torque for tapped aluminum bar is in.-lbs. (, Nm) Wire Rope Material: Stranded series stainless steel Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) U.S. Patent,9,7 Solutions in Energy Absorption and Vibration Isolation Tel.:

45 Compact CR Series Static Load vs. Deflection Compression CR-. (). (,8) () (,) CR-. (9,). (8,) (8,8) (,) CR-. (,7). (,7) (,) (,9) CR-. (,9). (,7) (,) 7 (,) CR Compact º Compression/Roll CR-. (,8). (8,) (,) (,8) CR-. (,9). (,9) (,) (,9) CR-.7 (,).7 (,) 8 (,) (,) CR-. (,).7 (9,) (,9) (,) Shear/Roll CR-. (,).9 (7,) 7 (,) 7 (,) CR-.9 (,).9 (9,9) (,8) (,8) CR-. (,9). (,) (,) (,) CR-. (,).8 (7,) (,) (,) Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

46 CR Compact CR Series Compact.8 (9,7). (,7) H ø.9 ø.9 (,) Ref. (Ref) Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W (Ref) Ref..9(,8) Typ. (Typ).8 (9,7).7 (9,) Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) CR-.7 (9).88 (). (,7) CR-.9 () ±..9 (). (,) Ø. #- UNC 8º A, B, C, D, E, S CR-. (7) (±,). (7). (,8) (Ø,) (M X,) (9º) CR-.8 (). (). (7,) CR - -DM P Model Number Ordering Code Mount Bar Options: *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated Mounting Options C sink C sink Thread A B C Thru C sink Thru Add M for Metric Mounting Options: For C sink and Threaded Options See Chart Thread C sink Thru D E S Thread Thread Thru Isolator Size: See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Maximum recommended torque for tapped aluminum bar is in.-lbs. (, Nm) Wire Rope Material: Stranded series stainless steel Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) U.S. Patent,9,7 Solutions in Energy Absorption and Vibration Isolation Tel.:

47 Compact CR Series Static Load vs. Deflection Compression CR-. (9).8 (7,) () 8 () CR-. (). (,) 7 () (,) CR-. (8). (,) 8 (8,) (,) CR-. ().7 (9,) (,8) (,9) CR Compact º Compression/Roll CR-.7 ().7 (9,) 8 () (,) CR-. (). (,) (8,8) 8 (,) CR-. (,7).8 (7,) (,8) (,8) CR-. (,).9 (,9) (,) (,9) Shear/Roll CR-.7 (). (8,) (,) (,) CR-.9 (8,).7 (,9) (,) (,) CR-. (,). (,) (,8) (,8) CR-. (,).8 (,) (,) (,) Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

48 CR Compact CR Series Compact. (,) H. (,) ø. ø. (,) Ref. (Ref) Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W Ref. (Ref).7 (9,). (,) Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) CR-. ().87 (7). () CR-. () ±.. (). () Ø. #- UNF 8º A, B, C, D, E, S CR-.7 () (±,). (9). () (Ø7,) (M X,) (9º) CR-.9 (7).7 (8).7 (8) CR - -DM P Model Number Ordering Code Mount Bar Options: Add M for Metric Mounting Options: Isolator Size: *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated All Mounting Options See Chart See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Mounting Options Thru C sink Thru A B C C sink C sink Thread Thread Thread Thru D E S Thread C sink Thru Maximum recommended torque for tapped aluminum bar is in.-lbs. (7, Nm) Wire Rope Material: Stranded series stainless steel Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) U.S. Patent,,79 Solutions in Energy Absorption and Vibration Isolation Tel.:

49 Compact CR Series Static Load vs. Deflection Compression CR-. ().77 (9,) 7 () (,8) CR-. (8).7 (9,7) (,) (,) CR-. ().(,8) (,) 9 (,) CR-. (.7).9 (9,) (,) (,7) CR Compact º Compression/Roll CR-. ().7 (9,) 7 (,) (,8) CR-. (,7). (9,) 8 (,) (,) CR-. (,). (7,) (,) (,7) CR-.8 (,). (,) (,) (,) Shear/Roll CR-.9 (8,).8 (7,) (,9) (,9) CR-. (7,). (,) (,) (,) CR-. (,). (,) (,7) (,7) CR-.7 (,).8 (7,) (,) (,) Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

50 CR Compact CR Series Compact. (,) H.8 (,) ø. (,) (Ref) Ref. Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W Ref. (Ref).9 (9,9). (,) Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) CR-. ().89 (8). () CR-.9 () ±.. ().7 (8) Ø. #- UNF 8º A, B, C, D, E, S CR-. () (±,). (9).8 () (Ø7,) (M X,) (9º) CR-.99 (7). (7). (7) CR - -DM P Model Number Ordering Code Mount Bar Options: Add M for Metric Mounting Options: Isolator Size: *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated All Mounting Options See Chart See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Mounting Options Thru C sink Thru A B C C sink C sink Thread Thread Thread Thru D E S Thread C sink Thru Maximum recommended torque for tapped aluminum bar is in.-lbs. (7, Nm) Wire Rope Material: Stranded series stainless steel Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) U.S. Patent,,79 7 Solutions in Energy Absorption and Vibration Isolation Tel.:

51 Compact CR Series Static Load vs. Deflection Compression CR- 8 (8).77 (9,) () () CR- 8. (8). (8,7) () (,) CR-. (7).7 (,8) (7,9) 8 (,) CR-. ().9 (9,) (,) 8 (,) CR Compact º Compression/Roll CR-. ().7 (8,) 7 () (,) CR-. (). (8,) (,) (,) CR-. (). (,) (,) 8 (,) CR-. (,7). (,8) (,9) (,7) Shear/Roll CR-. (). (,) (,) (,) CR-. (). (,7) (,) (,) CR-. ().8 (,) 8 (,) 8 (,) CR-. (,7).9 (8,) (,7) (,7) Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation 8

52 CR Compact CR Series Compact. (,) H. (,8) ø.88 (,8) (Ref) Ref. Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) W Ref. (Ref). (,). (,) Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) CR-.8 (7). (). (7) CR-. () ±.. (9). () Ø. #- UNF 8º A, B, C, D, E, S CR-. () (±,). (). () (Ø7,) (M X,) (9º) CR-.9 (79).8 (7). (7) CR - -DM P Model Number Ordering Code Mount Bar Options: Add M for Metric Mounting Options: Isolator Size: *[ ] - -T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - -T AL ALY (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated All Mounting Options See Chart See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Mounting Options Thru C sink Thru A B C C sink C sink Thread Thread Thread Thru D E S Thread C sink Thru Maximum recommended torque for tapped aluminum bar is in.-lbs. (7, Nm) Wire Rope Material: Stranded series stainless steel Operating Temperature Range: -ºF to ºF ( -ºC to ºC ) U.S. Patent,,79 9 Solutions in Energy Absorption and Vibration Isolation Tel.:

53 Compact CR Series Static Load vs. Deflection Compression CR- ().87 (,) 8 () 9 () CR- (9). (9,) () (9,) CR- (7).8 (7.) 8 () (,) CR- 8. (). (,) (7,9) (,) CR Compact º Compression/Roll CR- 9. ().9 (,9) 9 () (7,9) CR- 7. (). (,) (9,) (,) CR-. (). (8,) (7,9) (,8) CR-. (). (,) (,) 7 (,) Shear/Roll CR- 9. ().8 (,) (7,9) (7,9) CR- 7. ().8 (7,) (,) (,) CR-. (). (,) (,) (,) CR-. ().89 (8,) 9 (,) 9 (,) Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

54 HR HERM (High Energy Rope Mount) HERM (High Energy Rope Mount) HR-HR Series HR- HR-8 Overview HR- HR- HR- HR- The HERM isolator incorporates the use of a traditional Enidine helical wire rope isolator encased in a proprietary elastomeric compound. The stainless steel cable of the mount provides for a rugged construction, while the elastomer provides additional damping and stiffness. This unique design results in a fail safe mount with a higher stiffness and energy absorption capacity. The mount is readily scalable and performance easily tuned by varying the wire diameter, loop size, number of loops and elastomeric properties. The HERM isolator has proven particularly strong in low natural frequency soft deck applications of - Hz, reducing output G s to below G s. Its sealed nature of construction also provides for easy NBC washdown. Since the mounting size of the HERM isolator is virtually identical to that of standard wire rope isolators used in many shipboard applications, equipment upgrades are both simple and seamless with drop-in replacement capability. Solutions in Energy Absorption and Vibration Isolation Tel.:

55 HERM (High Energy Rope Mount) HR-HR Series Overmolded Elastomer Mounting Holes Overview HR HERM (High Energy Rope Mount) Wire Rope Cable Mounting Bars HERM Features: Lowest profile design for a Hz deck solution A variety of material combinations available Mounting identical to traditional Readily tunable to meet a wide range of natural frequencies HERM Greater load carrying capability HERM Benefits: Easy retrofit on fielded equipment Fewer mounts required to support a given load Smaller footprint than other mounts Compatible with NBC wash down requirements Improved noise attenuation compared to standard Tel.: Solutions in Energy Absorption and Vibration Isolation

56 HR HERM (High Energy Rope Mount) HERM (High Energy Rope Mount) HR Series Materials and Finishes: Standard: Performance: Elastomer: Proprietary Enidine Compound Wire Rope: / Stainless Steel Mount Bars: -T Aluminum, Chemical Conversion Coated per MIL-C-, Class A Hardware: Alloy Steel per ASTM F8, Zinc Plated (HR, HR, HR8 and HR) Optional: Mount Bars: -T Aluminum, Anodized per MIL-A-8, Type II, Class / Stainless Steel per ASTM A7, Passivated Hardware: / Stainless Steel (when stainless steel bars are specified) Special: Isolator Options: Mounting: Consult Enidine Enidine offers various mounting combinations of thru-hole, countersunk, and threaded bars depending upon the HERM model selected. Consult Enidine if a preferred mounting configuration is not listed. Overview Stiffness (Kv or Ks): HERM s exhibit non-linear stiffness behavior. Small deflections, usually associated with vibration isolation, will have a different spring rate than larger shock deflections. Enidine publishes typical vibration stiffness values (Kv), and average shock stiffness values (Ks) within the catalog. These values can be used with the provided equations listed on Page to predict system performance. Isolator Axes: HERM are multi-axis isolators. The diagram below includes load axis definitions and deflection considerations. COMPRESSION COMPRESSION/ROLL FIXED SHEAR FIXED ROLL Damping: Typically -%, depending on size and input level. For specific damping considerations, please consult Enidine. Mounting Orientation: The diagrams below illustrate typical mounting orientations. COMPRESSION COMPRESSION/ROLL FIXED SHEAR FIXED ROLL Stabilizers: Stabilizers are used to control deflections of tall supported masses. Stabilizers are typically recommended when the height equals -times the width or depth dimension. Solutions in Energy Absorption and Vibration Isolation Tel.:

57 HERM (High Energy Rope Mount) HR Series APPLICATION WORKSHEET - INPUTS IMPERIAL/METRIC PART I: SYSTEM DATA:. Total Supported Load ( WT): WT = lbs.. Number of Isolators (n): n = WT = Kg x 9.8 = N Application Worksheet IMPERIAL METRIC. Static Load per Isolator (W): W = WT n W = lbs.* W = N* * Assumes a central CG. Load Axis: Compression Load Axis Load Axis Shear or Roll º Compression/Roll PART II: VIBRATION SIZING:. Input Excitation Frequency (ƒi) = Hz ( = rpm ). System Response Natural Frequency for 8% isolation: ƒ n = ƒ i = Hz.. Maximum Isolator Vibration Stiffness: (K v ) K v = W (π ƒ n ) K v = lbs./in. K v = N/m g. Select an isolator by comparing calculated values with technical data for the desired load axis provided in tables for each isolator. a.) Calculated W must be less than the isolator s max static load and b.) Isolator s vibration stiffness must be less than the calculated maximum K v g = 8 in/sec or 9.8 m/sec HR HERM (High Energy Rope Mount) PART III: SHOCK SIZING:. Maximum Allowable Transmitted Acceleration: A T = G s. Shock Input Velocity: V = in./sec. V = m/sec. Free Fall Impact: V = gh g = 8 in./sec. or 9.8 m/sec. h = Drop Height (in. or m) V. Min. Isolator Response Deflection: D min = g(a ) T D min = in. D min = m W(V/D min ). Maximum Isolator Shock Stiffness: K s = K g s = lbs./in. K s = N/m. Select an isolator by comparing calculated values with technical data for the desired load axis provided in tables for each isolator. a.) Calculated W must be less than the isolator s max static load and b.) Calculated D min must be less than the isolator s max deflection Note: Metric deflections are calculated in meters (m) and technical data is in millimeters (mm). and c.) Isolator s shock stiffness must be less than calculated maximum K s V. Check actual deflection using K s from technical data K s (Isolator)g to ensure that the isolator s max deflection is D actual = D W actual = in. D actual = m not exceeded. 7. If isolator s max deflection is exceeded, select another isolator and repeat steps and. Tel.: Solutions in Energy Absorption and Vibration Isolation

58 HR HERM (High Energy Rope Mount) HERM (High Energy Rope Mount) HR Series. (,).7 ±. (, ±,) X Lower Mounting Holes X.88 ±. (, ±,) X Upper Mounting Hole. ±. (8, ±,). (,) (Ref). ±. (,8 ±,) X. (,).7 ±. (8,7 ±,) Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) Unit Weight Thru Hole Thread C sink Size lbs. Mounting in. in. Imperial (Kg) Options (mm) (mm) (Metric) HR-. (,) Ø.7 #/- UNC 8º HR-. (,) B, D, E, F (Ø,9) (M X,) (9º) HR-. (,) HR - - B Model Number Ordering Code L M P Mounting Options Mount Bar Options: *[ ] - -T Aluminum (or Equiv.) Chem Conv. Coated [ Y ] - -T Aluminum (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated C sink B C sink Thread D Thread Add M for Metric All Mounting Options Threaded Hole Options: [ H] - Helical, Free Running [ L ] - Helical, Locking, Dry Film Lubricated Thread E C sink C sink F Thread Mounting Options: Isolator Model: See Chart See Sizing Table Meets environmental requirements of MIL-M-78A * Standard features. Any non-standard items may require longer lead times. Call for quotation. Solutions in Energy Absorption and Vibration Isolation Tel.:

59 HERM (High Energy Rope Mount) HR Series 8 Static Load vs. Deflection Compression HR- (7). (8,) (8) () HR- 8 (8). (8,) (9) (9) HR- (). (8,) () 8 () HR HERM (High Energy Rope Mount) Roll 7 HR- 8 (8). (,) () 8 () HR- (8). (,) 7 () () HR- 9 (). (,) (7) 8 (9) Shear HR- (). (,) (7) () HR- (89). (,) () (8) HR- (8). (,) () 7 () Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

60 HR HERM (High Energy Rope Mount) HERM (High Energy Rope Mount) HR Series X. (,). ±. (7, ±,) X Mounting Holes X.8 ±. (. ±.).8 ±. (, ±,). (,9) (Ref). ±. (7, ±.) X.7 (7,) X. ±. (7, ±,) Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) Unit Weight Thru Hole Thread C sink Size lbs. Mounting in. in. Imperial (Kg) Options (mm) (mm) (Metric) HR-.8 (,8) Ø.8 ±. #/-8 UNC 8º HR-.8 (,8).7 B, (8) D, E (Ø9, ±,) (M8 X,) (9º) HR-.8 (,8).8 () HR - -B Model Number Ordering Code L M P Mounting Options Mount Bar Options: Add M for Metric *[ ] - -T Aluminum (or Equiv.) Chem Conv. Coated [ Y ] - -T Aluminum (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated All Mounting Options C sink Thread Thread B D E C sink Thread C sink Meets environmental requirements of MIL-M-78A Threaded Hole Options: [ H] - Helical, Free Running [ L ] - Helical, Locking, Dry Film Lubricated Mounting Options: Isolator Model: See Chart See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. 7 Solutions in Energy Absorption and Vibration Isolation Tel.:

61 HERM (High Energy Rope Mount) HR Series 7 Static Load vs. Deflection Compression HR- (89). (8,), () 9 () HR- (). (8,) 8 () (89) HR- 8 (). (8,) 8 () () HR HERM (High Energy Rope Mount) 7 Roll HR- (). (8,) (79) (7) HR- 9 (). (8,) (9) (7) HR- (). (8,) () 9 () Shear HR- (). (8,) (97) 8 (8) HR- (7). (8,) (7) () HR- (). (8,) 9 () 7 () Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation 8

62 HR HERM (High Energy Rope Mount) HERM (High Energy Rope Mount) HR, 8. Series X.7 (,) X.7 (,) X. (,) 8. ±. (, ±,) 8X Mounting Holes. ±. (, ±,) X.77 (9,) (Ref). (9,) (Ref). ±. (9,7 ±,) Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) Unit Weight Size lbs. (Kg) HR- 8.8 (,) HR- 7. (,) HR-. (,7) Mounting Option B Thru Hole in. (mm) Ø (Ø8, +,8, ) C sink Imperial 8º Model Number Ordering Code Mounting Option HR - -B P Mount Bar Options: Mounting Option: *[ ] - -T Aluminum (or Equiv.) Chem Conv. Coated [ Y ] - -T Aluminum (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated See Chart C sink B C sink Meets environmental requirements of MIL-M-78A Isolator Model: See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. 9 Solutions in Energy Absorption and Vibration Isolation Tel.:

63 HERM (High Energy Rope Mounts) HR, 8. Series 9 Static Load vs. Deflection k Compression HR- ( ). (88,9),9 () 7 () HR- ( ). (88,9) 9 (9) (7) HR- (). (88,9) (9) () HR HERM (High Energy Rope Mount) 8, k Roll HR- ( ). (88,9) (7) 7 (8) HR- (). (88,9) (9) () HR- (89). (88,9) (8) () , 8 Shear k HR- ( 89). (88,9), (87), (9) HR- ( ). (88,9) (99) 9 () HR- (7). (88,9) 7 (8) () Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

64 HR HERM (High Energy Rope Mount) HERM (High Energy Rope Mount) HR, 9. Series X.7 (,) X. (,) X.7 (,) 9. ±. (, ±,) 8X Mounting Holes. ±. (, ±,) X.77 (9,) (Ref). (9,) (Ref). ±. (9,7 ±,) Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) Unit Weight Size lbs. (Kg) HR-. (,8) HR- 9. (,) HR- 7. (,) Mounting Option B Thru Hole in. (mm) Ø (Ø8,,8 +, ) C sink Imperial 8º Model Number Ordering Code Mounting Option HR - -B P Mount Bar Options: Mounting Option: *[ ] - -T Aluminum (or Equiv.) Chem Conv. Coated [ Y ] - -T Aluminum (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated See Chart C sink B C sink Meets environmental requirements of MIL-M-78A Isolator Model: See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Solutions in Energy Absorption and Vibration Isolation Tel.:

65 HERM (High Energy Rope Mount) HR, 9. Series Static Load vs. Deflection k Compression HR- ( ). (88,9), (89), (8) HR- ( 79). (88,9), () 9 () HR- (). (88,9) 7 () 7 (7) HR HERM (High Energy Rope Mount) 8 8 k Roll HR- 7 ( 8). (88,9) (8) 7 () HR- 8 (8). (88,9) () () HR- 7 (). (88,9) () () Shear k HR- 9 ( 7). (88,9),7 (7), (9) HR- 8 ( ). (88,9) 79 (8) 87 () HR- 8 (8). (88,9) () 9 () Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

66 HR HERM (High Energy Rope Mount) HERM (High Energy Rope Mount) HR Series X. (,) X 7. (9,) X.7 (,). ±. (79, ±,) 8X Mounting Holes 9. ±. (, ±,). (,9) (Ref). (,) (Ref). ±. (, ±,) Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) Unit Weight Size lbs. (Kg) HR- (9,) HR- 8 (8,) HR- (,) Mounting Option B Thru Hole in. (mm) Ø.. +. (Ø,,8 +, ) C sink Imperial 8º Model Number Ordering Code Mounting Option HR - -B P Mount Bar Options: *[ ] - -T Aluminum (or Equiv.) Chem Conv. Coated [ Y ] - -T Aluminum (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated C sink B C sink Mounting Option: See Chart Meets environmental requirements of MIL-M-78A Isolator Model: See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Solutions in Energy Absorption and Vibration Isolation Tel.:

67 HERM (High Energy Rope Mount) HR Series Static Load vs. Deflection k Compression HR- 7 ( ). (,),7 (), (8) HR- ( 9). (,),8 (9) 777 () HR- (7). (,) (99) 9 () HR HERM (High Energy Rope Mount) 8 8 k Roll HR- ( ). (,) 9 () 7 (8) HR- ( ). (,) 8 (7) (7) HR- 9 (). (,) () (9) k Shear HR- 9 ( ). (,), (), () HR- ( 89). (,), (8) 97 (7) HR- ( ). (,) 8 (7) () Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

68 HR HERM (High Energy Rope Mount) HERM (High Energy Rope Mount) HR8 Series X. (7,) X. (,7) X 7. (9,).7 ±. (7,7 ±,) 8X Mounting Holes 9. ±. (, ±,) X.8 (,) (Ref).7 (9,) (Ref) 7. ±. (8, ±,) Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) Unit Weight Size lbs. (Kg) HR8- () HR8- (8) HR8- () Mounting Option B Thru Hole in. (mm) Ø.. +. (Ø, +,,8) C sink Imperial 8º Model Number Ordering Code Mounting Option HR8 - - B P Mount Bar Options: *[ ] - -T Aluminum (or Equiv.) Chem Conv. Coated [ Y ] - -T Aluminum (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated C sink B C sink Mounting Option: See Chart Isolator Model: See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Solutions in Energy Absorption and Vibration Isolation Tel.:

69 HERM (High Energy Rope Mount) HR8 Series 8 Static Load vs. Deflection k Compression Lbs. (kn) in. (mm) Lbs./in. (kn/m) Lbs./in. (kn/m) HR8-, (7,79).7 (9,),8 ( ) 7, ( ) HR8-,7 (,).7 (9,) 8,9 ( ), (79) HR8-87 (,87).7 (9,),7 (7),9 (78) HR HERM (High Energy Rope Mount) 8 Roll Lbs. (kn) in. (mm) Lbs./in. (kn/m) Lbs./in. (kn/m) 8 k HR8-, (,9).7 (9,),8 (9), (9) HR8-7 (,98).7 (9,),9 (9),88 (9) HR8- (,9).7 (9,) (7) 9 () k Shear Lbs. (kn) in. (mm) Lbs./in. (kn/m) Lbs./in. (kn/m) HR8-,98 (,).7 (9,),87 (8), ( ) HR8-,79 (7,9).7 (9,),9 (),79 () HR8- (,9).7 (9,),7 (87),9 () Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation

70 HR HERM (High Energy Rope Mount) HERM (High Energy Rope Mount) HR Series X. (8,) X.87 (77,8) X. (9,9). ±. (, ±,) 8X Mounting Holes. ±. (,8 ±,) X. (,8) (Ref). (7,) (Ref) 9. ±. (8, ±,) Note: Dimensions are in inches (mm) Tolerances are ±. (±.mm) Unit Weight Size lbs. (Kg) HR- () HR- 8 (8) HR- 7 () Mounting Option B Thru Hole in. (mm) Ø (Ø9,8 +,,8) C sink Imperial 8º Model Number Ordering Code Mounting Option HR - -B P Mount Bar Options: *[ ] - -T Aluminum (or Equiv.) Chem Conv. Coated [ Y ] - -T Aluminum (or Equiv.) Anodized [ P ] - / Stainless Steel (or Equiv.) Passivated C sink B C sink Mounting Option: See Chart Meets environmental requirements of MIL-M-78A Isolator Model: See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. 7 Solutions in Energy Absorption and Vibration Isolation Tel.:

71 HERM (High Energy Rope Mount) HR Series Static Load vs. Deflection k Compression Lbs. (kn) in. (mm) Lbs./in. (kn/m) Lbs./in. (kn/m) HR-, (,8).7 (,7),9 ( 79) 8, ( ) HR-,9 (,9).7 (,7) 8, ( ), (7) HR-, (,).7 (,7), (), (9) HR HERM (High Energy Rope Mount) 8 8 k Roll Lbs. (kn) in. (mm) Lbs./in. (kn/m) Lbs./in. (kn/m) HR-, (8,9). (7),7 (7), (78) HR-,8 (,8). (7),77 (), (7) HR- 8 (,7). (7) () 8 (9) Shear Lbs. (kn) in. (mm) Lbs./in. (kn/m) Lbs./in. (kn/m) k HR-,9 (9,7). (7),8 (8),78 ( ) HR-,9 (,9). (7),9 (), () HR- (,87). (7) 8 (),8 (89) Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation 8

72 Custom Engineered Products WEAR Pipe Restraints Overview WEAR Pipe Restraints WEAR (Wire Energy Absorbing Rope) pipe restraints are uniquely packaged wire rope isolators designed to protect structures from steady state vibration and isolate them from seismic and dynamic loads. These new generation energy absorbing restraints feature simple construction. There are no oils, seals or complex moving parts required to perform their function. The design has eliminated the problems often associated with hydraulic or mechanical restraints which are complex and prone to failure. The Wire Rope Isolator, which is the basic element of the technology has been successfully used by the military for more than years. As a result, it conforms to government and military quality control requirements. The restraint is thus exempt from surveillance testing. In-place visual inspection is all that is required to assure operability. The WEAR can be provided with a wide range of piping accessories and can be supplied to ISO 9, Mil-Q, Mil-I, B. or ASME Section III subsection NF. Options Available Various end connections are available to meet existing hardware such as Bergen Paterson, Basic Engineers, PSA, Grinnel and others. For sizing or specific application information, call your local representative or Enidine directly. Typical Applications Pipe Restraint Hydraulic Transients Power Generating Plants Chemical Plants Seismic Restraints Steady State Vibration WEAR Benefits Repeatable Environmentally Stable Low Structural Loading Dissipate Energy Wide Operating Temperature Range Environmental Conditions Nuclear Plants Refineries Structural Vibration Wind Loading Pulp and Paper Mills Proven Technology Simple Construction Corrosion Resistant High Cycle Fatigue Life No Maintenance Normal Temperature: -ºF to ºF/-ºC to ºC Faulted Temperature: -ºF to ºF/-ºC to 7ºC Humidity: % RH Radiation: x 9 RAD Pressure: -.7 psi to psi atm to 7 atm Isolated Pipe - No Vibration WEAR Vibration Inputs Captured every quarter loop, wire rope coil will not collapse; two-pitch design prevents twisting. 9 Solutions in Energy Absorption and Vibration Isolation Tel.:

73 Custom Engineered Products Wire Mesh Isolator Overview Wire Mesh Isolators Wire Mesh Isolator Features: Wide operating temperature range Long service life Environmental compatibility Maintenance-free operation Custom sizes and shapes available Wire Mesh Isolator Typical Applications: Wire Mesh Isolator Wire mesh material can be manufactured in a multitude of shapes and sizes to accommodate your specific application. When exercised, the wire mesh damping elements convert input energy to heat. Friction is created when knitted or woven stainless steel wire strands are displaced relative to one another. Knitted metals have inherent resiliency and provide high-damping characteristics and non-linear spring rates. Wire Mesh Isolator Auxiliary Power Units Engines Communications Equipment Medical Equipment Sensitive Mobile Electronics Material Development: If your application parameters fall outside of the standard product line, you can be sure that Enidine has the engineering capabilities and resources to design, test and recommend a custom solution to suit your specific needs: D Modeling System Analysis (Modal, Linear/Non-Linear, Dynamic Analysis and Simulation, Finite Element, Shock and Vibration) In-house test facility for prototypes and production models: Static Load/Deflection, Life Cycle, Vibration Frequency, Dynamic Load, Random Input and High Frequency Noise AS-9 Certified ISO 9 Certified Tel.: Solutions in Energy Absorption and Vibration Isolation 7

74 General Notes Notes Notes: Notes 7 Solutions in Energy Absorption and Vibration Isolation Tel.:

75 WR and HERM Applications: Avionics Carts, Transporters & Gurneys Chemical Processing Equipment Electronic Cabinets Military Equipment Navigation Equipment Over-the-road Transport Pump, Generator & Compressor Isolation Shipboard Electronics Shipping Cases, Skids & Containers Transportable Shelters Ground Support Equipment Engine Stands Shipboard Shock (Mil-S-9D) Galley and Lavatory Equipment Piping and Ducting CR Applications: Audio/ Visual Equipment Catering Carts Communications Packages Medical Devices Sensitive Electronic Equipment Security Cameras Hard Drives / CD-ROM Drives Electronics Production Optical Sensors Mobile Electronics (Mil-Std-8E) Displays

76 Enidine USA Industrial/Rail Headquarters Enidine Incorporated 7 Centre Drive Orchard Park, New York 7 USA Phone: 7--9 Fax: [email protected] [email protected] Enidine Europe Enidine Trading Company GmbH Rheinauenstrasse, 79 Bad Bellingen Rheinweiler Germany Phone: Fax: [email protected] Enidine Japan Enidine Co. Ltd. -- Chigasaki-Higashi, Tsuzuki-Ku Yokohama-Shi Kanagawa - Japan Phone: Fax: [email protected] Enidine China Enidine Hangzhou rd. Floor, No. Building South Area No. 98, 9 Street Hangzhou Economic & Technological Development Zone Hangzhou, China 8 Phone: Fax: [email protected] Aerospace Headquarters Enidine Incorporated 7 Centre Drive Orchard Park, New York 7 USA Phone: 7--9 Fax: [email protected] [email protected] Aerospace Enidine Incorporated Unit 7, Whitwick Business Centre Stenson Road Coalville, Leicestershire LE7 JP United Kingdom Phone: 7 8 Fax: [email protected] Enidine West Enidine Incorporated 8 Technology Dr., Suite Irvine, California 98 USA Phone: Fax: [email protected] Enidine / Jarret SAS -8, rue Alexandre, Bat E BP Gennevilliers, CEDEX, 9 France Phone: Fax: [email protected] [email protected] /7 WR8R