The UniWest 4D Rapid Prototype Product Development System. Use mouse or arrow keys to scroll through presentation.
|
|
- Samuel Gilmore
- 8 years ago
- Views:
Transcription
1 The UniWest 4D Rapid Prototype Product Development System Use mouse or arrow keys to scroll through presentation.
2 Overview! UniWest s unique 4D process for rapid prototype development ensures fast solutions to complex application problems: Define Customer Application Problems Design Innovative Engineering Model Develop Solution Driven Prototypes Deliver Turn Key Solutions
3 Roller Bearing Inspection System Define Customer Application Problem: In-line inspection of roller bearings that are placed in critical operating applications.
4 Case Study Design Innovative Engineering Model Research showed this hopper and roller bearing transport design to be the best approach.
5 Solution Driven Develop Solution Driven Prototype. Roller Bearings are shown automatically scanned, defect free and dropping through chute onto tray.
6 Turn Key Delivery Deliver Turn Key System for in line, defect free roller bearing assemblies.
7 Aerospace Engine Manufacturing Define Customer Application Problem: More accurate and efficient way to scan hard to reach areas of engine parts.
8 Aerospace Engine Manufacturing Design Innovative Engineering Model: Several designs were developed for inspection of broach slots.
9 Aerospace Engine Manufacturing Develop Solution Driven Prototype: Indexed prototype proved to be the best solution for inspecting critical engine parts.
10 Aerospace Engine Manufacturing Define Customer Application: Inspect geometrically difficult to inspect areas. A flexible probe coil was Designed, Developed and Delivered. It has proven to be a good solution for several difficult to inspect areas.
11 Aerospace Engine Manufacturing Define Customer Application Problem: A better way to inspect fan blade joints. Design indicated that a swivel handle would work best on this application.
12 Aerospace Engine Manufacturing Define Customer Application: Inspect critical broach slot areas. An extended field probe was Designed, Developed and Delivered. This design has improved inspection time and repeatability.
13 Aerospace Engine Manufacturing Define Customer Application Problem: A better way to inspect the leading edge of fan blades. Design proved a focused coil with US-454 EddyView worked best.
14 Airframe Manufacturing Define Customer Application Problem: A better way to inspect the inside diameter of ball screws. In-depth research of the stabilizer arm determined the Design prototype. It proved to be the best solution to detect cracks on the inside diameter of this difficult to inspect part.
15 General Purpose Bolt Hole Scanner/Indexer Define Customer Application Problem: A bolt hole scanner to rapidly and accurately inspect critical engine parts. UniWest Developed a hand held scanner assembly that keeps the coil perpendicular to the side of the hole. This mechanical assist is more accurate than holding by hand.
16 Power Generation Define Customer Application Problem: Develop an eddy current instrument that would also have vision and strip chart capabilities. The US-454 EddyView is shown inspecting the inside of a valve with the VisionProbe, and using an eddy current probe to calibrate from a test block.
17 UniWest Designed this hybrid instrument to include eddy current, video capture and strip chart recorder. Prototype instruments were Developed, modifications were applied and instruments were Delivered on schedule.
18 Define Customer Application Problem: Need the ability to visually inspect thermally hot environments. UniWest Designed this high temperature vision probe to work with the US-454 EddyView eddy current instrument. Develop Solution Driven Prototype: The HiTempProbe can withstand temperatures up to 900 F. This complete package was Delivered turn key.
19 Capabilities: Probe Lab The UniWest probe lab manufactures innovative eddy current prototypes for the NDT industry.
20 Capabilities: Quality Control The UniWest quality assurance program insures that every probe conforms to customer specifications.
21 Capabilities: CAD/CAM UniWest s application engineering department utilizes state of the art CAD/CAM software modeling programs to solve technical NDT problems and assist in rapid proto-typing and product design.
22 Capabilities: Engineering UniWest s engineering lab designing a new applications driven prototype instrument.
23 Machining UniWest utilizes state of the art CNC and 3-D printing technology for quality production, short delivery times, and proto-type development.
24 Resources Internal Application Experience - More than 147 years of combined experience - Corporate Commitment to Innovation through Applications Engineering Customer Partnerships - Proprietary Relationships with our Customers Vendor Partnerships Quality System Compliant to AS9100
25 Define Design Develop Deliver Use back button at beginning of presentation to return to main page.
Industrial Metrology and Engineering Applications in the Wind Turbine Industry
Industrial Metrology and Engineering Applications in the Wind Turbine Industry 1. Company Introduction M-7 Technologies is a privately owned, ISO 9001 certified company offering engineered solutions for
More informationRapid Prototyping: Hype vs. Reality
Rapid Prototyping: Hype vs. Reality Many product designers and engineers who are researching additive RP systems as a way to test form, fit and function of their prototypes may be unaware that there is
More informationInnovative Non-Destructive Testing Solutions
Innovative Non-Destructive Testing Solutions A Generation of Experience Applied for Today and Tomorrow MISSION To provide innovative, cost effective, NonDestructive Inspection solutions within the Aerospace
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationDIAMOND Gear Company, LTD. an ERIKS Company. Installation, Maintenance, & Operation Manual Declutchable Worm Gear
DIAMOND Gear Company, LTD. an ERIKS Company Installation, Maintenance, & Operation Manual Declutchable Worm Gear 2016 DECLUTCHABLE WORM GEAR INSTRUCTIONS This is an instructional manual which provides
More informationTypes of 3D Scanners and 3D Scanning Technologies.
Types of 3D Scanners and 3D Scanning Technologies. There are many types of 3D scanners and 3D scanning technologies. Some are ideal for short range scanning while others are better suited for mid or long
More informationRemanufacturing the Canon P Type Toner Cartridges 0343. Remanufacturing the Canon P Type Toner Cartridges OVERVIEW
Publications Dealer Catalog #23 Catalog Update Chips Comprehensive Chip List Lexmark Chip Cross Reference Reset Box Information Samsung Reset Box Compatibility MasterSet USB Installation Software MasterSet
More informationwww.menegon-metrologie.com Ultimate ease of use, menuless with large icons Easy output to email, print or file
Dimensioning & Mark-up Software for Mantis, Lynx and the SX range of stereo microscopes. Image capture and mark-up software, with on-screen dimensioning Ultimate ease of use, menuless with large icons
More informationOptical Digitizing by ATOS for Press Parts and Tools
Optical Digitizing by ATOS for Press Parts and Tools Konstantin Galanulis, Carsten Reich, Jan Thesing, Detlef Winter GOM Gesellschaft für Optische Messtechnik mbh, Mittelweg 7, 38106 Braunschweig, Germany
More informationTHE CANON 106 TONER CARTRIDGE
THE CANON 106 TONER CARTRIDGE DOC# 0381 By Mike Josiah and the Technical Staff at Summit Technologies CANON 106 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS Page 1 Remanufacturing the Canon ImageClass
More informationTesting Capabilities. Worldwide Designers & Manufacturers of Air Moving Equipment
Testing Capabilities Twin Twin City City Fan Fan Companies, Companies, Ltd. Ltd. Worldwide Designers & Manufacturers of Air Moving Equipment TestingCapabilities Twin City Fan Companies, Ltd. In today s
More informationSFI SPECIFICATION 61.1 EFFECTIVE: FEBRUARY 26, 2014
SFI SPECIFICATION 61.1 EFFECTIVE: FEBRUARY 26, 2014 PRODUCT: Turbochargers 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating and
More informationUltrasonic Load Monitoring
Ultrasonic Load Monitoring Who We Are One Company, Total Support, Complete Solutions Over many years, Hydratight has provided world-class bolted joint solutions and continues to set international standards
More informationHYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationHP Laser Jet 4200/4240/4250/4300/4350 Swing Plate
HP Laser Jet 4200/4240/4250/4300/4350 Swing Plate 1 Swing Plate Assembly-RM1-0043 1 Swing Plate Kit-5851-2766 (RM1-0043 plus RM1-1091 gear) CAUTION: Fuser may be hot. Turn off printer, unplug it and allow
More informationPRODUCT BROCHURE 7.10.7 SF. Shop-Floor Coordinate Measuring Machine
PRODUCT BROCHURE 7.10.7 SF Shop-Floor Coordinate Measuring Machine HEXAGON METROLOGY 7.10.7 SF Quality Insight at the Point of Production The Hexagon Metrology 7.10.7 SF is like a machine tool for quality
More informationAutomotive Applications of 3D Laser Scanning Introduction
Automotive Applications of 3D Laser Scanning Kyle Johnston, Ph.D., Metron Systems, Inc. 34935 SE Douglas Street, Suite 110, Snoqualmie, WA 98065 425-396-5577, www.metronsys.com 2002 Metron Systems, Inc
More informationHYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationProductivity+ CNC plug-in
Productivity+ CNC plug-in Productivity+ CNC plug-in The Productivity+ CNC plug-in is a unique software application for CNC machine tools, offering unparalleled opportunities for workpiece measurement,
More informationEncoded Phased Array Bridge Pin Inspection
Encoded Phased Array Bridge Pin Inspection James S. Doyle Baker Testing Services, Inc. 22 Reservoir Park Dr. Rockland, MA 02370 (781) 871-4458; fax (781) 871-0123; e-mail jdoyle@bakertesting.com Product
More informationOperating Instructions
Operating Instructions Series RT Spring Driven Hose Reels Low Pressure Model Numbers: RT402-OLP RT605-OLP RT450-OLP RT835-OLP RT403-OLP RT802-OLP RT465-OLP RT850-OLP RT405-OLP RT803-OLP RT625-OLP RT450-OLPSM
More informationTHE HP LASERJET 5200 TONER CARTRIDGE
THE HP LASERJET 5200 TONER CARTRIDGE DOC# 0344 By Mike Josiah and the Technical Staff at Summit Technologies HP LASERJET 5200 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS Page 1 Remanufacturing the HP
More informationUsing Robotics for Non-Destructive Examination & Characterization of. Hazardous Storage Tanks
Robotic End Effector For Inspection of Storage Tanks (FETC DE-AR21-93MC30363) Using Robotics for Non-Destructive Examination & Characterization of Hazardous Storage Tanks R. Beer (rbeer@oss.oceaneering.com,
More informationLooking into other Industries Qualification of NDT for Swiss Nuclear Utilities
4th International Symposium on NDT in Aerospace 2012 - Th.2.B.4 Looking into other Industries Qualification of NDT for Swiss Nuclear Utilities Klaus DRESSLER, Daniel ALGERNON, Philip KICHERER SVTI Swiss
More information3D SCANNING SOLUTION FOR PIPELINE INTEGRIT Y ASSESSMENT!
NDT SOLUTIONS 3D SCANNING SOLUTION FOR PIPELINE INTEGRIT Y ASSESSMENT! CODE-COMPLIAN T PORTABLE 3D MEASUREMENT SOLUTIONS Pipeline operators and NDT service companies must deal with increasing pressure
More informationHARDWARE STANLEY ARCHITECTURAL HARDWARE
HARDWARE STANLEY ARCHITECTURAL HARDWARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Company history...2 Wardrobe pivots...3, 4 Cabinet hinges... Cabinet pulls..., 6 Cabinet knobs...6 Cabinet
More informationNX CAM TURBOMACHINERY MILLING PRODUCT REVIEW
Dr. Charles Clarke PRODUCT REVIEW Market drivers...3 Existing specialist applications...3 A new generation of software that provides flexibility...4 Specialized operations for blisks and impellers...4
More informationOptimization Services
Measurements Stork Optimization Services can perform various sorts of measurements on your installation; a summary of the commonest measurements is given below: Vibration measurements: Stork Optimization
More informationInstructions and precautions. Fork Height. Visit our website at: http://www.harborfreight.com
Pallet Jack Item 68760 / 68761 Instructions and precautions Specifications Capacity Control Lever Fork Height Fork Length Fork Width Maximum Minimum Width over Forks Steering Wheel Dia. 2-1/2 Ton (5,000
More informationReducing Life Cycle Costs with Reliable Airframe Microwave Assemblies. White Paper
Reducing Life Cycle Costs with Reliable Airframe Microwave Assemblies White Paper June 2014 Abstract: Aircraft manufacturers can no longer afford the total costs associated with airframe microwave assemblies
More informationHow to Run the PacBio RS II Instrument. 1. Run Instrument. 1.1 How to Run the RS II Instrument
How to Run the PacBio RS II Instrument 100 338 600 01 1. Run Instrument 1.1 How to Run the RS II Instrument Welcome to Pacific Biosciences' How to Run the PacBio RS II Instrument training module. This
More informationThe Art of Safe Landings
The Art of Safe Landings Reliable. From landing to take-off. Over 100 years of experience... In 1911, 21 year-old Anthony Fokker flew his home-built aircraft over the city of Haarlem. In 1919, one of the
More informationDelcam s Aerospace Heritage
Delcam s Aerospace Heritage With over 30 years CADCAM experience and now the world s largest specialist supplier of machining software, Delcam plc provides aerospace solutions for civil, military, rotary
More informationGE Inspection Technologies. Eddy Current Probes and Accessories Catalogue
GE Inspection Technologies Eddy Current Probes and Accessories Catalogue GE Inspection Technologies A global leader in technology-driven inspection solutions that deliver productivity, quality and safety
More informationSunMaxx Solar Filling Station Operating Instructions
SunMaxx Solar Filling Operating Instructions Content 1. Declaration of conformity... 2 2. Introduction... 2 3. Transportation and unpacking... 4 4. Mounting and commissioning... 5 5. End of operation...
More informationABERLINK 3D MKIII MEASUREMENT SOFTWARE
ABERLINK 3D MKIII MEASUREMENT SOFTWARE PART 1 (MANUAL VERSION) COURSE TRAINING NOTES ABERLINK LTD. EASTCOMBE GLOS. GL6 7DY UK INDEX 1.0 Introduction to CMM measurement...4 2.0 Preparation and general hints
More informationENGINE COOLING SYSTEM
ENGINE COOLING SYSTEM 1988 Toyota Celica 1987-88 TOYOTA Engine Cooling Systems Celica DESCRIPTION The basic liquid cooling system consists of a radiator, water pump, thermostat, cooling fan, pressure cap,
More informationINSTALL INSTRUCTIONS: Blend Door Repair Kit
Dorman Products A/C Blend Door Repair Tool For 2006 Chevrolet Equinox / Pontiac Torrent 902-600 Installation Instructions Parts Included 1. Plastic Replacement Sleeve 2. Mounting Plate 3. Saw 4. Drill
More informationInstallation and maintenance instructions. Danfoss Vent
Installation and maintenance instructions Danfoss Vent 1 Unit design... 2 2 Project planning and installation instructions... 3 2.1 Ventilation...3 2.2 Piping installation....3 2.3 Condensation line...4
More informationOperating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
More informationRapidScan3D Ultrasonic Instrumentation Quick Start Guide
RapidScan3D Ultrasonic Instrumentation Quick Start Guide Part Number: 147363 Setting up the RapidScan3D System Terminology used in this document includes: instrument the black Peli-case and its contents;
More informationManufacturing Technology
Job Ready Assessment Blueprint Manufacturing Technology Test Code: 2084 / Version: 01 Copyright 2007. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information
More informationRebuild Instructions for 70001 and 70010 Transmission
Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before
More informationTool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
More informationECE 480 - Design Team 4 Hot Strip Mill Centerline Tracking 10/10/13
ECE 480 - Design Team 4 Hot Strip Mill Centerline Tracking 10/10/13 Facilitator Dr. Selin Aviyente Team Members Bryan Blancke Mark Heller Jeremy Martin Daniel Kim Sponsor ArcelorMittal Project Liaison
More informationTool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö
Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014 0214/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationDesign/Build and Equipment Integration
Design/Build and Equipment Integration PROFESSIONAL ENGINEERING AND DESIGN It starts with your challenge. And ends with a custom-tailored REL solution. REL, Inc. provides professional engineering services
More informationPowerPoint Presentation
PowerPoint Presentation 1. Power Source Are the laptop and LCD projector plugged in? If so, are they plugged directly into a power outlet or a power strip? Do the power outlet and/or strip work? If there
More informationAuditing Contract Manufacturing Processes
Auditing Contract Manufacturing Processes Greg Caswell and Cheryl Tulkoff Introduction DfR has investigated multiple situations where an OEM is experiencing quality issues. In some cases, the problem occurs
More informationEVANS ENTErprises, Inc.
EVANS ENTErprises, Inc. Since 1954 THE LEADER IN ELECTRO-MECHANICAL SALES, SERVICE AND INTERGRATION Our Mission Our purpose at Evans Enterprises is to serve customers by providing increased value of product
More informationSystem Handbook. Table of contents. Welcome
System Handbook Table of contents Welcome...1 CE Labelling...2 Delivery Scope...2 General Safety Instructions...2 Assembly and Startup...3 Problem Handling...5 Shuttle Mini-PC Complete System...6 Connectors
More informationSTATFlow. Direct-to-Drain System. For use with STATIM 2000 and STATIM 5000 Autoclaves. Installation Guide and Operator s Manual
STATFlow Direct-to-Drain System For use with STATIM 2000 and STATIM 5000 Autoclaves Installation Guide and Operator s Manual STATFlow Installation Guide and Operator s Manual 95-113193 Rev 2.0. Copyright
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationSERIES NG 1800 STRUCTURAL STEELWORK
MANUAL OF CONTRACT DOCUMENTS FOR HIGHWAY WORKS VOLUME 2 NOTES FOR GUIDANCE ON THE SPECIFICATION FOR HIGHWAY WORKS SERIES NG 1800 STRUCTURAL STEELWORK Contents Clause Title Page NG 1800 (08/14) General
More informationGE Oil & Gas. Air Cooled Heat Exchangers. Robust and reliable for all loads and applications
GE Oil & Gas Air Cooled Heat Exchangers Robust and reliable for all loads and applications What it is Air cooled heat exchangers are commonly used in industrial applications where a reliable source of
More information. Failure. Analysis... Report...
. Failure. Analysis... Report..... for (Generation Company) (Station) Purchase Order Number XXXX (Dated XX/XX/XXXX) Report N-XXXX-FA, Revision 0 Schulz Electric Company Job Number N-XXXX Motor ID Number
More informationDUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy
More informationPhased-Array ROWA-SPA: High-performance testing machine for combined, 100-percent automated testing of square and round bars
11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6-10, 2014, Prague, Czech Republic Phased-Array ROWA-SPA: High-performance testing machine for combined, 100-percent automated
More information10.1 FUNCTIONS OF INPUT AND OUTPUT DEVICES
FORM 4 COMPUTER STUDIES Chapter 10: Input and Output Devices March, 01 10.1 FUNCTIONS OF INPUT AND OUTPUT DEVICES The main function of an input device is to The main function of an output device is to
More informationMechanical Installation
Page -1-1. INTRODUCTION AND PURPOSE 1.1. This specification covers the installation, testing and precommissioning of mechanical equipment. Work is to be performed in conjunction with the manufacturer s
More information3D SCANNING: A NEW APPROACH TOWARDS MODEL DEVELOPMENT IN ADVANCED MANUFACTURING SYSTEM
3D SCANNING: A NEW APPROACH TOWARDS MODEL DEVELOPMENT IN ADVANCED MANUFACTURING SYSTEM Dr. Trikal Shivshankar 1, Patil Chinmay 2, Patokar Pradeep 3 Professor, Mechanical Engineering Department, SSGM Engineering
More informationTECHNICAL BULLETIN ALL S2 CX S. BEHR Heater system: modifications
page CX, BEHR heating unit, level 3 modification:. The heating fan motor (935) (Bosch CPB 2V 23.404) can be swapped by, i.e. a Bosch DPD 2V 3.26.7 double fan motor from a BMW5??. One of the shaft ends
More informationThe Crankshaft Oil Seal Section has been added to the DD15 Workshop Manual. The sections that are found in the Engine Chapter are now renumbered.
NUMBER: 08 DD15-5 S.M. REF.: 1.11 ENGINE: DD15 DATE: July 2008 SUBJECT: CRANKSHAFT OIL SEAL SECTION PUBLICATION: DDC-SVC-MAN-0002 The Crankshaft Oil Seal Section has been added to the DD15 Workshop Manual.
More informationDIY Y6. Build Manual V.A 2014
DIY Y6 Build Manual V.A 2014 1 Contents Thanks for purchasing a DIY Y6! These instructions will show you how to assemble a Y6 using the Pixhawk autopilot system and ArduCopter/APM:Copter firmware. If you
More information1000-LB. TRAILER JACK OWNER S MANUAL
1000-LB. TRAILER JACK OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationOperating Instructions Drill rig DRU160
Operating Instructions Drill rig DRU160 Index 000 / 001 Original operating instructions 10988825 en / 20.10.2009 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
More information2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
More informationIntegration Services
Integration Services EXPERIENCED TEAM ADVANCED TECHNOLOGY PROVEN SOLUTIONS Integrations for large scale metrology applications Metris metrology to streamline your CAPABILITIES Advanced systems design Engineering
More informationELECTRONIC THERMOSTAT AND THERMOMETER With SPEED CONTROL
148 OLD CONCORD TURNPIKE, BARRINGTON NH 03825 USA TEL (603) 868-5720 FAX (603) 868-1040 1-800-435-6708 E-Mail:sales@seafrost.com www.seafrost.com ELECTRONIC THERMOSTAT AND THERMOMETER With SPEED CONTROL
More informationSperry Rail International A Rockwood Company. Non-destructive Testing of Rail
Non-destructive Testing of Rail Bob Crocker Background Hither Green disaster November 1967 Section of rail at a bolted joint came away Caused by cracks growing from bolt holes Realisation that cracks too
More informationTECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR
TECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR 1.1.0 SCOPE : This specification covers design, manufacture, testing at manufacture s works before
More informationRMI-Q multiple radio probe interface
RMI-Q multiple radio probe interface Globally recognised 2.4 GHz waveband Maximise system numbers Superior communication capability RMI-Q for optimised process control capability Tackle process variation
More informationNew Advances in Rapid Prototyping using Inkjet-based 3D Printing
New Advances in Rapid Prototyping using Inkjet-based 3D Printing April 2011 Objet Geometries Ltd. DISCLAIMER: Objet Geometries Ltd. ("Objet") does not guarantee the final release and availability of materials,
More informationInstallation Instructions K900 series Door Closer
Installation Instructions series Non-Hold Open Models Adjustable size : 1(BF) thru 6 Optional Feature : Delayed Action An Incorrectly installed or improperly adjusted door closer can cause property damage
More informationCompetence gives security. A competitive edge in rotary axes through experience, simulation, calculation, testing
Competence gives security A competitive edge in rotary axes through experience, simulation, calculation, testing Bearings for rotary axes Competence gives security Figure 1: Axial/radial bearing YRTSM
More informationRenishaw 2008. apply innovation TM. Calibrating 5-axis machines to improve part accuracy. 5Align
Calibrating 5-axis machines to improve part accuracy 5Align Productive Process Pyramid TM Understanding and tracking machine behaviour Process verification Thermal compensation In-cycle process control
More informationNDT 2010 Conference Topics
NDT 2010 Conference Topics Session 2B (2) Novel Techniques Chairman Dr R A Smith 14.30 A new and novel inspection system for Titanium billets Authors - Harshad V. Patel, Xiaoming Jian, Simon Woods, Ian
More informationSHIMS STAMPINGS MACHINED COMPONENTS
SHIMS STAMPINGS MACHINED COMPONENTS The Spirol Concept WE ARE SHORT-RUN PRODUCTION SPECIALISTS Our objective is to provide our customers with the highest quality, short run stamped and machined components,
More informationMODEL D GENERATOR COIL REPLACEMENT
MODEL D GENERATOR COIL REPLACEMENT Materials Needed Procedure concept2.com 800.245.5676 (U.S. & Canada only) 0708 REPLACING THE MOUSE ON THE INDOOR ROWER 0409 TOOLS 5/32 7/16 or 11mm concept2.com 1. 2
More informationMTM delivers complete manufacturing solutions from top to bottom enterprise to the factory floor.
Introduction (MTM) delivers high-quality automated portable tools and software systems to the aerospace industry which enable faster time to market for our customers. Our philosophy is to collaborate with
More informationCETAC Z-Drive Assembly
CETAC Z-Drive Assembly Replacement Guide Manual Part Number 610144 Rev 1, 2012 CETAC Technologies, Printed in USA Overview This guide describes the necessary steps to replace the Z-drive assembly on your
More informationSCHATZ - TEST Tool testing systems. SCHATZ -certest-w. Dynamic testing of torque tools
SCHATZ - TEST Tool testing systems SCHATZ -certest Dynamic testing of torque tools SCHATZ -calitest Calibrator for indicating and click-type torque tools SCHATZ -combitest Mobile test center for all torque
More informationStainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
More informationChange Notice Revision 2 adds a definition of NANDTB, and acceptance of the National Aerospace NDT Board of Australia.
Advisory Circular AC43-8 Revision 2 Non-destructive Testing 27 February 2015 General Civil Aviation Authority advisory circulars contain information about standards, practices, and procedures that the
More informationDMU 75 / 95 monoblock
www.dmgmori.com Five-axis universal milling machines DMU 75 / 95 monoblock High tech as standard Five-axis simultaneous machining at the best price. DMU 75 / 95 monoblock Top features for five-axis simultaneous
More informationSPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
More informationreflecta Super 8 Scanner
reflecta Super 8 Scanner User Manual 1 FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part
More informationCerobear Spindle Bearings for Machine Tool Applications
Cerobear Spindle Bearings for Machine Tool Applications Cerobear Spindle Bearings About CEROBEAR Committed to the abbreviation CEramic in ROlling BEARings, CEROBEAR GmbH is the renowned world leader in
More informationFTDI VCP DRIVER (free) (WIN/MAC/LINUX) http://www.ftdichip.com/drivers/vcp.htm
002 - CONNECTING THE PRINTER Now that you have an idea what 3D printing entails, we can continue and connect the printer to your computer. First make sure you have a computer with a decent amount of RAM
More informationTUBE-TO-TUBESHEET JOINTS: THE MANY CHOICES ABSTRACT KEYWORDS. Seal welding, tube-to-tubesheet welds, heat exchanger, mock-up, tube expansion
B. J. Sanders Consultant 307 Meyer Street Alvin, Texas 77511 TUBE-TO-TUBESHEET JOINTS: THE MANY CHOICES ABSTRACT After a decision has been made to use zirconium as the material of construction for a shell
More informationRange Road RR Series Semi-Automatic Firewood Processor. Crated Unit Assembly Manual
Range Road RR Series Semi-Automatic Firewood Processor Crated Unit Assembly Manual 1 1) Undo 8-18mm x 19mm Nuts and bolts, 2 on each leg of top frame 2) Lift top of Metal crate off and move out of work
More informationNON-DESTRUCTIVE TESTING OF PIPELINES. L. Annila. Abstract
NON-DESTRUCTIVE TESTING OF PIPELINES L. Annila Abstract This paper shall present different, contemporarily available non-destructive testing (NDT) methods of pipelines and compare them to each other from
More informationDL-9000 Ticket Eater with AP-100 Logic Board
DL-9000 Ticket Eater with AP-100 Logic Board DL-9000 Ticket Eater by Deltronic Labs February 2013 1 Table of Contents Initial Setup... 3 Handling Messages on the Display... 3 DL Ticket Eater Manager Software...
More informationPart and tooling design. Eastman Tritan copolyester
Part and tooling design Eastman Tritan copolyester Part and tooling design Process Part design Tooling design High cavitation considerations Process Process Project development flow chart Concept OEM generates
More informationRack C. 25 slots (maximum 50 components) Maximum placement area 620 445 mm. Standard placement area 500 360 mm. Rack A
placeall 510 Basic machine Range of applications Dispensing and picking and placing of low volume SMT and small series, up to 4.000 components per hour (cph). Component capability Chips 0402 up to 45 45
More informationGate Leg Drop Leaf Table Plans
Preparing the table top blanks: Cut and glue enough 3/4 stock to make three panels 40 long by 24 wide (they will be cut to final size at a later time). While the glue dries we will work on the legs. Preparing
More information