WSO2 Business Process Server Clustering Guide for 3.2.0

Transcription

1 WSO2 Business Process Server Clustering Guide for Throughout this document we would refer to WSO2 Business Process server as BPS. Cluster Architecture Server clustering is done mainly in order to achieve high availability and scalability. High Availability High availability means there is redundancy in the system such that service is available to outside world irrespective of individual component failures. For example, if we have a two node cluster, even if one node fails, the other node would continue to serve requests till the failed node is restored again. Scalability Scalability means increasing the processing capacity by adding more server nodes. Load Balancer Load balancing is the method of distributing workload to multiple server nodes. In order to achieve proper clustering function you would require a Load Balancer. The function of the load balancer is to monitor the availability of the server nodes in the cluster and route requests to all the available nodes in a fair manner. Load balancer would be the external facing interface of the cluster and it would receive all the requests coming to the cluster. Then it would distribute this load to all available nodes. If a node has failed, then the load balancer will not route requests to that node till that node is back online. WSO2 Business Process Server Cluster Architecture In order to build a wso2 business process server cluster you would require the following. 1. Load balancer 2. Hardware / VM nodes for BPS Nodes 3. Database Server Following diagram depicts the deployment of a two node wso2 bps cluster.

2 Load Balancer will receive all the requests and distribute the load (Requests) to the two BPS nodes. BPS Nodes can be configured as master node and slave node. A BPS cluster can have one master node and multiple slave nodes. BPS Master Nodes / Slave Nodes Master node is where the workflow artifacts (Business processes / Human Tasks) are first deployed. The slave nodes will look at the configuration generated by the master node for a given deployment artifact and then deploy those artifacts in its runtime. WSO2 BPS requires this method of deployment because it does automatic versioning of the deployed bpel /human task artifacts. Hence, in order to have the same version number for a given deployment artifact across all the nodes, we need to do the versioning at one node (Master Node). A BPS server decides whether it is a master node or a slave node by looking at its configuration registry mounting configuration. We will look at that configuration in detail later. BPS and Registry In the simplest terms, registry is an abstraction over a database schema. It provides an API using which you can store data and retrieve data to a database. WSO2 BPS embeds the registry component and hence has a build in registry. Registry is divided into three spaces. Local Registry

3 Local registry is used to store information local to a server node. Configuration Registry Configuration Registry is used to store information that needs to be shared across same type of server nodes. For example, configuration registry is shared across BPS server nodes. However, this same configuration registry would not be shared across another type of server nodes. Governance Registry Governance Registry is used to store information that can be shared across multiple clusters of different type of servers. For example governance registry can be shared across BPS and ESB cluster. In the above diagram, these different registry configurations are depicted as individual databases. Note: BPS Master Node refers to the configuration registry using a Read/Write link while the BPS Slave nodes refer to the configuration registry using a Read/Only link. BPS and User Store BPS management console requires a user to login to the system in order to do management activities. Additionally various permissions levels can be configured for access management. In human tasks, depending on the logged in user, what he can do with tasks will change. All this access control/authentication/authorization functions are inherited to the BPS server from carbon kernel. You can also configure an external LDAP/Active directory to grant users access to the server. All this user information / permission information is kept in the user store database. In the above diagram, UM DB refers to this database. This database is also shared across all the cluster nodes. BPS Persistence DB BPS handles long running processes and human tasks. This means, the runtime state of the process instances/ human task instances have to be persisted to a database. BPS persistence database is the databases where we store these process / t ask configuration data and process / task instance state. Configuring the BPS Cluster Now that we have understood the individual components depicted in the above diagram, we can proceed to implement our BPS cluster. I will break down the steps in configuring the cluster into following steps. The only major difference between the master node and slave node is in registry.xml configuration. If you are using two machines (hardware or VM) all other configurations are identical for master node and slave node except IP addresses, ports and deployment synchronizer entry. However, if you are configuring the cluster on the same machine for testing purpose, you will need to change multiple files as port conflicts can occur. 1. Create database schemas. 2. Configure the master datasource.xml ( Registry and User manager databases )

4 3. Configure datasources.properties ( BPS Persistence database ) 4. Configure registry.xml ( Different for master node and slave node) 5. Configure the user-mgt.xml 6. Configure axis2.xml 7. Configure tasks-config.xml 8. Configure bps.xml 9. Configure carbon.xml 10. Configure the server startup script Creating database schemas WSO2 BPS supports the following major databases. 1. Oracle 2. MySQL 3. MSSQL 4. PostgreSQL In the above diagram, we have depicted 5 databases. We can use H2 as the local registry for each BPS Node. We can create one schema for registry and configure registry mounting configuration for configuration registry and governance registry. Hence we will have to create 3 more databases for registry, user store and BPS persistence db. Database Schema Requirement DB Name Configuration/Governance Registry User store database BPS Persistence database REGISTRY_DB UM_DB BPS_DB You can find the corresponding SQL scripts for creating registry databases from wso2bps-3.2.0/dbscripts directory. SQL script for bps persistence database can be found at wso2bps-3.2.0/dbscripts/bps directory. As an example of creating a database, we will show the steps for creating a database using MySQL. mysql> create database REGISTRY_DB; mysql> use REGISTRY_DB; mysql> source <BPS_HOME>/dbscripts/mysql.sql;

5 mysql> grant all on REGISTRY_DB.* TO identified by "password"; Download and copy the MySQL connector to <BPS_HOME>/repository/components/lib directory. Configuring master-datasources.xml You can configure data sources for registry and user store in master-datasources.xml file found in <BPS_HOME>/ repository/conf/datasources directory. <datasources-configurationxmlns:svns=" <providers> <provider>org.wso2.carbon.ndatasource.rdbms.rdbmsdatasourcereader</provider> </providers> <datasources> <datasource> <name>wso2_carbon_db</name> <description>thedatasourceusedforregistryandusermanager</description> <jndiconfig> <name>jdbc/wso2carbondb</name> </jndiconfig> <definitiontype="rdbms"> <configuration> <url>jdbc:h2:repository/database/wso2carbon_db;db_close_on_exit=false;lock_timeout=60000</url> <username>wso2carbon</username> <password>wso2carbon</password> <driverclassname>org.h2.driver</driverclassname> <maxactive>50</maxactive> <maxwait>60000</maxwait> <testonborrow>true</testonborrow> <validationquery>select1</validationquery> <validationinterval>30000</validationinterval> </configuration> </definition> </datasource> <datasource> <name>wso2_registry_db</name> <description>thedatasourceusedforregistry- config/governance</description> <jndiconfig> <name>jdbc/wso2registrydb</name> </jndiconfig> <definitiontype="rdbms"> <configuration> <url>jdbc:mysql://localhost:3306/registry_db?autoreconnect=true</url> <username>root</username> <password>root</password> <driverclassname>com.mysql.jdbc.driver</driverclassname> <maxactive>50</maxactive> <maxwait>60000</maxwait> <testonborrow>true</testonborrow> <validationquery>select1</validationquery> <validationinterval>30000</validationinterval> </configuration> </definition> </datasource> <datasource> <name>wso2_um_db</name> <description>thedatasourceusedforregistry- local</description> <jndiconfig> <name>jdbc/wso2umdb</name> </jndiconfig> <definitiontype="rdbms"> <configuration> <url>jdbc:mysql://localhost:3306/um_db?autoreconnect=true</url> <username>root</username>

6 <password>root</password> <driverclassname>com.mysql.jdbc.driver</driverclassname> <maxactive>50</maxactive> <maxwait>60000</maxwait> <testonborrow>true</testonborrow> <validationquery>select1</validationquery> <validationinterval>30000</validationinterval> </configuration> </definition> </datasource> </datasources> </datasources-configuration> Most of the entries are self-explanatory. Configure datasources.properties (BPS Persistence database) Open <BPS_HOME>/repository/conf/datasources.properties and add the relevant entries such as database name, driver class and database connection URL. Following is the matching configuration for mysql. synapse.datasources=bpsds synapse.datasources.icfactory=com.sun.jndi.rmi.registry.registrycontextfactory synapse.datasources.providerport=2199 synapse.datasources.bpsds.registry=jndi synapse.datasources.bpsds.type=basicdatasource synapse.datasources.bpsds.driverclassname=com.mysql.jdbc.driver synapse.datasources.bpsds.url=jdbc:mysql://localhost:3306/bps_db?autoreconnect=true synapse.datasources.bpsds.username=root synapse.datasources.bpsds.password=root synapse.datasources.bpsds.validationquery=select 1 synapse.datasources.bpsds.dsname=bpsds synapse.datasources.bpsds.maxactive=100 synapse.datasources.bpsds.maxidle=20 synapse.datasources.bpsds.maxwait=10000 You need to do this for each node in the cluster. Configure registry.xml Registry mount path is used to identify the type of registry. For example /_system/config refers to configuration registry and "/_system/governance" refers to governance registry. Following is an example configuration for bps mount. I will highlight each section and describe them below. I will only describe the additions to the registry.xml file below. Leave the configuration for local registry as it is and add following new entries. Registry configuration for BPS master node <dbconfigname="wso2bpsregistry"> <datasource>jdbc/wso2registrydb</datasource> </dbconfig> <remoteinstanceurl=" <id>instanceid</id>

7 <dbconfig>wso2bpsregistry</dbconfig> <readonly>false</readonly> <enablecache>true</enablecache> <registryroot>/</registryroot> </remoteinstance> <mountpath="/_system/config" overwrite="virtual"> <instanceid>instanceid</instanceid> <targetpath>/_system/bpsconfig</targetpath> </mount> <mountpath="/_system/governance" overwrite="virtual"> <instanceid>instanceid</instanceid> <targetpath>/_system/governance</targetpath> </mount> Let s look at above configuration in detail. We are identifying the data source we configured in the master datasources xml using the dbconfig entry and we give a unique name to refer to that datasource entry which is wso2bpsregistry ; Remote instance section refers to an external registry mount. We can specify the read only/read write nature of this instance as well as caching configurations and registry root location. Additionally we need to specify cacheid for caching to function properly in the clustered environment. Note that cacheid is same as the jdbc connection URL to our registry database. We define a unique name id for each remote instance which is then referred from mount configurations. In the above example, our unique id for remote instance is instanceid In each of the mounting configurations, we specify the actual mount patch and target mount path. Registry configuration for BPS Salve node <dbconfigname="wso2bpsregistry"> <datasource>jdbc/wso2registrydb</datasource> </dbconfig> <remoteinstanceurl=" <id>instanceid</id> <dbconfig>wso2bpsregistry</dbconfig> <readonly>true</readonly> <enablecache>true</enablecache> <registryroot>/</registryroot> <cacheid>root@jdbc:mysql://localhost:3306/ REGISTRY_DB</cacheId> </remoteinstance> <mountpath="/_system/config" overwrite="virtual"> <instanceid>instanceid</instanceid> <targetpath>/_system/bpsconfig</targetpath> </mount> <mountpath="/_system/governance" overwrite="virtual"> <instanceid>instanceid</instanceid> <targetpath>/_system/governance</targetpath> </mount> This configuration is same as above with readonly property set to true for remote instance configuration. Configure user-mgt.xml

8 In the user-mgt.xml enter the datasource information for user store which we configured previously in master-datasoures.xml file. You can change the admin username and password as well. However, you should do this before starting the server. <Configuration> <AddAdmin>true</AddAdmin> <AdminRole>admin</AdminRole> <AdminUser> <UserName>admin</UserName> <Password>admin</Password> </AdminUser> <EveryOneRoleName>everyone</EveryOneRoleName> <Propertyname="dataSource">jdbc/WSO2UMDB</Property> </Configuration> Configure axis2.xml We use axis2.xml to enable clustering. We will use well known address (WKA) based clustering method. In WKA based clustering, we need to have a subset of cluster members configured in all the members of the cluster. At least one well known member has to be operational at all times. In the axis2.xml, find the clustering section. <clusteringclass="org.wso2.carbon.core.clustering.hazelcast.hazelcastclusteringagent" enable="true"> <parametername="membershipscheme">wka</parameter> <parametername="localmemberhost"> </parameter> <parametername="localmemberport">4000</parameter> <members> <member> <hostname> </hostname> <port>4000</port> </member> <member> <hostname> </hostname> <port>4010</port> </member> </members> </clustering> Change enabled parameter to true. Find the parameter membershipschema and set wka option. Then configure the loadmemberhost and LocalMemberport Entries. Under the members section, add the host name and port for each wka member. As we have only two nodes in our sample cluster configuration, we will configure both nodes as WKA nodes. Configure task-config.xml BPS packages the task server component as well. By default, when we enable clustering, this component waits for two task server nodes. Hence we need to change this entry in order to start the bps server. Open task-config.xml and change task server mode. <taskservermode>standalone</taskservermode> Configure bps.xml

9 In bps.xml, you need to configure the following entries. 1. Enable distributed lock <tns:usedistributedlock>true</tns:usedistributedlock> This entry enables hazelcast based synchronizations mechanism in order to prevent concurrent modification of instance state by cluster members. 2. Configure scheduler thread pool size <tns:odeschedulerthreadpoolsize>0</tns:odeschedulerthreadpoolsize> Thread pool size should always be smaller than maxactive database connections configured in datasources.properties file. When configuring the thread pool size allocate threads per core depending on your setup. Then leave some additional number of database connections since bps uses database connections for management API as well. Example settings for a two node cluster. MySQL Server configured database connection size 250. maxactive entry in datasource.properties files for each node 100 SchedulerTreadPool size for each node 50 Configure carbon.xml If you want automatic deployment of artifacts across the cluster nodes, you can enable deployment synchronizer feature from carbon.xml. <DeploymentSynchronizer> <Enabled>true</Enabled> <AutoCommit>true</AutoCommit> <AutoCheckout>true</AutoCheckout> <RepositoryType>svn</RepositoryType> <SvnUrl> <SvnUser>wso2</SvnUser> <SvnPassword>wso2123</SvnPassword> <SvnUrlAppendTenantId>true</SvnUrlAppendTenantId> </DeploymentSynchronizer> Deployment synchronizer functions by committing the artifacts to the configured svn location from one node (Node with AutoCommit option set to true) and sending cluster messages to all other nodes about the addition / change of the artifact. When the cluster message is received, all other nodes will do an svn update resulting in obtaining the changes to relevant deployment directories. Now the server will automatically deploy these artifacts.

10 For the master node, keep AutoCommit and AutoCheckout entries as true. For all other nodes, change autocommit entry to false. Configure the server startup script In the server startup script, you can configure the memory allocation for the server node as well as jvm tuning parameters. If you open the wso2server.sh or wso2server.bat file located at the <BPS_HOME>/bin directory and go to the bottom of the file, you will find those parameters. Change them according to the expected server load. Following is the default memory allocation for a wso2 server. -Xms256m -Xmx1024m -XX:MaxPermSize=256m Cluster artifact deployment best practices 1. Always deploy the artifact on the master node first and on slave nodes after some delay. 2. Use deployment synchronizer if a protected svn repository is available in the network. 3. Otherwise you can use simple file coping to deploy artifacts