The Home of Remote Monitoring. & Control

Transcription

1 The Home of Remote Monitoring & Control

2 Introduction As leaders in providing remote monitoring and control solutions, we offer effective, high quality systems and solutions for monitoring environments and controlling equipment remotely. Our IP based systems use the internet and GSM (mobile phone) networks to monitor all manner of sensors and equipment and warn the user of vital equipment breakdown. This allows the user to take appropriate action. Our systems are typically used to remotely monitor servers, fridges and freezers, storage equipment, goods in transportation, food, medicine, warehouses and other environmentally sensitive equipment. We measure temperature, humidity, pressure and can detect gas, flood, smoke, air flow, power, door open/close and others. In addition to remote monitoring our systems are capable of taking automatic action by turning ON/OFF equipment based on certain readings, such as turning ON air conditioning, and in the process saving your time and money. We can also remotely monitor utility meters, PLCs and connect equipment with legacy communication ports to the internet. Our systems and products are cutting edge technology but are simple to use. As a result they appeal to all, from individuals needing to monitor their holiday homes to large organisations monitoring their servers and fridge/ freezer systems. We have a team of engineers that are continuously devising, designing and developing new products using the newest technology to continually enhance our products capability while maintaining simplicity of use. The following pages offer a summary view of popular application examples using our products and systems.

3 Contents Ethernet Based Remote Monitoring 4 Fridge Freezer Monitoring 6 Goods Transportation 8 GSM Based Remote Monitoring 10 Engergy Meter Monitoring 12 Flood and Water-Leak Monitoring 14 I/O Monitoring and Control over Ethernet 16 Sensors 18 Software 19 Installation All our products are devised with ease of use and installation in mind. They are delivered with quick installation guides and anyone with rudimentary knowledge of IT can start deploying our products very quickly. However, there are situations where companies with large or complicated requirements need help with installing their equipment. We offer installation services, using either Sensormetrix engineers or approved installers, for a quick and efficient deployment of our products. All electrical installations, if required, are carried out with engineers qualified to BS 7671 standard for domestic and commercial installation. Hardware and software configuration are carried out to our customers specifications.

4 Temperature Humidity LAN Power 6V-14V DC Temperature Humidity LAN Power 6V-14V DC Environmental Websensor Ethernet Based Remote Monitoring Systems For: server rooms, warehouses, factories, museums, galleries, offices, holiday homes Remote monitoring of server rooms, warehouses and other environments that house equipment essential to any business s well-being, is a crucial activity that has to be taken seriously by companies. Losing a server for even a day when a company s business activity relies so much on communication nowadays can be catastrophic. Whether it is temperature, humidity, CO2, smoke, gas or any other parameter that needs to be measured, a warning system through and/or SMS can save a company thousands in the long run. What we mean by a remote monitoring system is the ability to measure parameter(s) and send alarm(s) to the appropriate personnel to take corrective action. This alarm is primarily in form and the monitoring does not require human intervention after the initial set up. The monitoring system connects to a company s Local Area Network, is configured on a web browser and is left to monitor, log and send alarms. Basic software is free but more sophisticated monitoring and logging software is also available. The most common parameter that is measured is temperature; however humidity, flood, door contact, smoke and many other parameters can be measured depending on their level of importance. Summary Ethernet based monitoring systems can measure almost any sensor and send or SMS alerts to the user. Measured values can be saved in table or graphical formats. This allows the user to keep data history for further analysis or for audit purposes. Sensormetrix Solutions We offer a vast number of high quality Ethernet based remote monitoring systems from the simplest to the more powerful products that can monitor many parameters simultaneously. Setting up of these products is intuitive and free software is provided. Some of our products have been devised, designed and manufactured to eliminate the need for IT know-how to make remote monitoring available to a vast number of companies, others require some IT knowledge to set up. We can virtually monitor any sensor, as we have products that can accept sensors with 1-Wire bus, sensors with dry contact (voltfree) outputs, thermocouples and sensors with 1-10V or 4-20mA outputs. We can also measure power presence and have products that can turn equipment ON or OFF based on sensed inputs Ethernet Argon Neon Series 100 GSM Temperature Monitor Environmental Remote Monitor Argon Neon Series 100 GSM Temperature Monitor Environmental Remote Monitor HWg-STE SIM SIM Monitor, Alert & Log Monitor, Alert & Log Titanium Series Temperature sensor RAID 5 Temperature sensor Temperature, humidity and light sensor RAID 5 Temperature, humidity and light sensor 4 The Home of Remote Monitoring and Control

5 Sensormetrix Solutions for Ethernet Based Remote Monitoring Systems Neon Low Cost Temperature & Humidity Sensor Designed for its user friendly deployment, the Neon 100 monitors temperature and humidity as standard. alert and periodical live readings and data history are sent automatically to the user, delivering an effective remote monitoring system with a price to match, at domestic homes or any kind of industrial situations. Temperature measurement range: -40 C to +125 C Temperature accuracy: ±0.3 C (measured at 25 C) Temperature resolution: 0.01 C Humidity measurement range: 0 to 100%RH (non-condensing) Humidity accuracy: ±3.0%RH (20 to 80%RH) Humidity resolution: 0.01%RH Poseidon - Family of multisensor products A family of products with the capability of monitoring practically any sensor, the Poseidon family is designed primarily for complex systems, yet each member of the family is straightforward to set up and use. Some members of the family like the 4002 and 2250 can send SMS alerts, as well as , and others like the 3468 and 3268 also have relay outputs that enable the users to control other equipment (a pump for example) based on sensor inputs. Capable of monitoring many parameters Temperature and humidity Smoke, flood, door contact, gas and more Mains power Option to send SMS as well as alerts Control of other equipment based on sensor inputs Advanced software suite for monitoring and graphical representation SNMP EM01b - Family of monitors approved by Nagios Proven, reliable and with a long history of successful sales, the EM01b family of sensors approved by Nagios is designed with performance in mind. Monitoring temperature, humidity and light as standard, the additional options include extra temperature sensor, flood sensors, door contact, voltage detection and LCD display. All plugins for Nagios, as well as What s up Gold and Cacti monitoring software is available from Sensormetrix. Temperature, humidity and light sensors as standard Temperature measurement range -40 to + 60 C, Accuracy ±0.2 C Relative Humidity measurement range 5% to 95% Illumination measurement range 0 to 1000 Lux Contact us on: +44 (0)

6 Fridge and Freezer Monitoring (Medicine and Food Storage) For: Medicines, drugs, food, perishable goods, cold rooms, goods transportation Monitoring and recording of temperature values of Industrial and commercial Fridges and Freezers, especially for Medicines and Food storage is now a requirement, thanks to legislation and safety directives. Interestingly many of these directives are not concerned with recording of the actual temperature values but the minimum and maximum levels. These include directives and guidance in the Duthie report from Royal Pharmaceutical Society for medicine storage and Food Standards Agency for storage of food. Moreover, it is a requirement that all the temperature monitoring and logging systems are calibrated to EU standard, so that the accuracy of the readings can be verified independently of the equipment supplier. Data-loggers also need to be battery operated, with a long battery life and battery low indicator, to ensure that the user has sufficient warning to replace the battery. Summary Battery operated with long battery life and battery low warning Calibrated temperature sensors Recording and presentation of maximum and minimum levels Ability to download stored data for further analysis and inspection LAN and WAN monitoring This typical system can be used over Local Area Network or very remotely over a Wide Area Network Ethernet Dual Channel Temperature Data-logger S0121 USB Humidity and Temperature Data-logger Quad Channel Temperature Data-logger LOG ALARM R3120 S0141 Our family of battery operated, calibrated data-loggers have an unrivalled number of combinations to suit any situation. These data-loggers can measure and record temperature, humidity and other values and make this information available as live data. alerts, as well as visual alerts are available, making these one of the most versatile products available in the market today. A number of the data-loggers have an integrated LCD display that show the current, as well as maximum and minimum values. Some can monitor up to 4 fridges and freezers at a time, reducing cost. All are IP67 rated, meaning that they can be cleaned periodically for hygiene purposes. Up to temperature and/or humidity values at user defined intervals can be recorded. The battery can last up to 6 years (with battery low indicator) and all data can be downloaded on to a PC/server in spread-sheet form or in graphical representation form. For companies using many data-loggers, our software suite allows monitoring to be done in one portal and enable automatic download of recorded data and graphical representation of all data in one place. All logger data can be downloaded into a PC, using specially designed communication cables. 6 The Home of Remote Monitoring and Control

7 Sensormetrix Solutions for Fridge and Freezer Monitoring Designed for monitoring and storing temperature (and humidity in some cases) values for any situation, our calibrated data-loggers are especially suitable for fridge and freezer monitoring, with medicine and food storage in mind as they conform to all the requirements that are set out by the appropriate bodies. Common Features Fully calibrated to traceable EU standard Accuracy: ±0.4 C Battery operated Battery lasts up to six years Software Battery Low indicator Our data-loggers include free software that allows download and view of all stored data on to a PC. For customers using a number of data-loggers, we recommend our state of the art database suite, that allows data from all units to be stored in one portal for easy analysis and reporting. Logging interval 10s to 24hrs Store up to 32,000 values Maximum and minimum value indicators Download of stored data to a PC in spread-sheet format (CSV) IP67 rated (water and dust proof) Ability to send alerts (with additional software) Ability to send SMS alerts (with optional software and modem) Example of some of our products: S Calibrated Data-logger Integrated Temperature sensor Temperature measurement range: -30 to + 70 C LCD Display with current, maximum and minimum values S Calibrated Data-logger Can monitor up to 4 fridges and freezers Uses 4 cabled temperature sensors Cable lengths 1m, 2m, 5m and 10m as standard Temperature measuring range up to -80 to +200 C LCD Display will give current, maximum and minimumvalues R Calibrated Data-logger Temperature and humidity logger Integrated sensors High accuracy Contact us on: +44 (0)

8 RECORD ALARM DATA LOGGER T-PRINT Goods Transportation (Environmental Conditions) For: Transport of goods, medicines, food, animals Monitoring the environmental condition of goods during transportation, as proof to the customer that their conditions have been met has now become a requirement in many goods delivery situations. This is mainly due to legislation, especially where food is concerned. Using a Sensormetrix data-logger is a great way of ensuring that no environmental damage has been done to the cargo in transit and proving it. The requirements for monitoring goods during transportation are varied. Below is a list of typical scenarios that are easily used in goods transportation to prove the provenance of correct transit of goods. Summary Solutions range from low cost but effective USB data-loggers to sophisticated loggers that can display the temperature in the driver cabin and with printer for proof of conditions during transportation. and SMS alerts can be sent from the vehicle to headquarters in the event of environmental conditions going outside specified range when using the GSM based data-loggers. 1. Low cost USB data-loggers: These are battery operated Temperature and/or Humidity USB loggers that connect easily to a PC via USB socket. USB data-loggers are configured simply, using a PC and are packed with the goods during transportation. The collected data can be downloaded on to a PC on delivery but max. and min. values are shown on the logger if it has an LCD display. Low cost, the USB loggers generally come without calibration but are low cost and very easy and convenient to use. 3. Loggers with on-board printer: Very similar to the calibrated data-loggers but include on-board printer. Upon delivery of goods the driver can print a log of the values measured in transit. The Loggers with printer are normally not battery operated and use the vehicle battery for power, via the cigarette lighter socket or permanently wired if preferred. 2. Calibrated Loggers: These record Temperature and/ or Humidity and are battery operated with long battery life. More importantly these products are fully calibrated, which is a requirement for food and medicine storage and transportation specially. Some versions of these parts come with an LCD display and use an external sensor. These products are rather useful, as they can be placed in the driver s cabin with the sensor placed with the goods. The driver can then keep an eye on the temperature and humidity, as well as record them. Like the USB dataloggers, these products are simply connected to a PC for set up and download of recorded data. 4. GSM based loggers: GSM based loggers monitor the goods during delivery and if the temperature and/or humidity go outside of safe limits will send , SMS and phone call alerts to previously set phone numbers and addresses. The stored data can be downloaded with an request and current values can be viewed using text. Prints results Results: Minimum: -35 C Maximum: 10 C RECORD ALARM DATA LOGGER -5 C T-PRINT G0221 S The Home of Remote Monitoring and Control

9 Sensormetrix Solutions for Goods Transportation Example of some of our products: Carbon-LCD-63 - USB Data-logger Log Temperature and humidity values USB interface for easy connection to a PC Download of logged data in spreadsheet and graphical formats Battery operated - battery lasts for up to one year LCD display Warning LED light if temperature and/or humidity go above or below pre-set values 40,000+ records Battery included S Calibrated Data-logger External temperature sensor Traceable calibration certificate included Fast data transfer to the PC - full memory of 32,000 readings for approximately 30sec. Data extraction via USB, RS232, Ethernet, GSM modem Permanent connection to PC, data is possible to download even during logging Large dual line display with special symbols Optional display of maximum and minimum measured values Alarm is indicated by blinking of the value on the LCD display or LED G0221E - Data-logger with Printer Temperature data-logger with printer and display Used for proof of temperature of goods during transportation Printer gives details of temperature sensor during transportation Can accept up to two temperature sensors Display can be used to view live data Large memory can keep data for many years Argon GSM Based Data-logger Works out of the box (requires SIM) Global Quad Band GSM/GPRS Engine Up to 10 numbers for SMS temperature alerts Up to 10 numbers for ring out temperature alert temperature alerts Temperature data-logger, s temperature history report Programmable via SMS Request current temperature via SMS Wall mountable Contact us on: +44 (0)

10 Mobile/GSM Remote Monitoring For: Server rooms, warehouses, outstations and any location where Ethernet is not available Many companies with remote sites and outbuildings require monitoring of their equipment on a regular basis, to ensure that they are in perfect working condition. This monitoring could be in the form of checking temperature, humidity, pressure and other parameters, or could be in the form of smoke detection, gas detection, door open/close etc. The following products use the GSM/Mobile network for remote monitoring and do not require the internet to relay alerts and measured history of data. This makes them a unique remote monitoring system solution, as customers will continue to get alerts even when their network is down. Summary There are two main reasons to use GSM based remote monitoring systems: 1. The user requires a monitoring system that is independent of the Local Area Network 2. The remote location or equipment that need monitoring has no access to Ethernet. GSM based monitoring systems are ideal for both the above situations. The units with internal battery are especially useful, as alerts will also be sent if mains power is lost. Scenarios for Mobile Network only Monitors 1. Most remote sites do not have a broadband/internet connection or a Local Area Network. This is where remote monitoring equipment using the GSM/mobile network is unbeatable. 2. There are also situations where companies prefer a monitoring solution that is independent of their Local Area Network, to ensure that they will still receive alerts regardless of their server /network condition. Mobile ALERT: SMS ALERT: Phonecall ALERT: , Data Download Mobile Network Internet Argon Series GSM Temperature Monitor HWg-ARES12 SIM SENSORS IN 1 IN 2 SIM Card ETHERNET Temperature, Humidity, Smoke, Gas, Power, Door Contact, Flood Temperature 10 The Home of Remote Monitoring and Control

11 Sensormetrix Solutions for GSM Remote Monitoring Sensormetrix offer a number of GSM based monitoring systems, where these products do not need to connect to a Local Area Network to monitor, send SMS and alerts and also act as a data-logger to allow the user to download data history to analyse. These products can use any SIM card as long as they are data enabled to relay information to the user. Argon GSM Temperature Monitor Simple, reliable temperature monitor that sends SMS, and phone call alerts when the temperature goes outside the limits set by the user. Data history can also be sent to the user in spread-sheet format as an attachment. The Argon 100 can be configured using a PC or a mobile phone with text messages. Up to 10 recipients can receive the alerts, ensuring that warnings are not missed. Works out of the box (requires SIM) Temperature monitor with , SMS and phone call alerts Configurable with a PC or with text messaging Quad Band GSM frequencies - Can be used anywhere in the world Request current status via SMS Delivered with all accessories (requires SIM and Sensor) Ares12 - GSM Temperature and Humidity Monitor A very versatile monitoring system, capable of measuring temperature and humidity, as well as other parameters such as smoke detection, motion detection, door open/close, presence of power and others. The Ares12 incorporates an internal battery that allows it to send an alert when it loses mains power. However it can carry on monitoring for a few hours while the power issue is resolved. Temperature and/or Humidity monitor Quad Band GSM frequencies Can be used anywhere in the world Internal battery allows user alert when mains power is lost Delivered with all accessories (requires Sensor(s) and SIM card) Two additional dry contact inputs for door, gas, smoke and flood monitoring Logs recorded values in internal memory Contact us on: +44 (0)

12 Energy Meter Monitoring For: Monitoring of utility meters, including alerts in the event of unusual energy usage, billing and more. Monitoring the consumption of Electricity, Water, Gas and Heat is an important aspect of cost saving and environmental obligation for many companies. This can only be done if accurate, reliable and complete data is made available to decision makers. There are many ways that energy consumption data from meters can be transferred for analysis but the most reliable method is through Local Area Network. This allows remote downloading of data in a very efficient manner. Sensormetrix remote power monitoring solutions enable M-Bus* meters and Pulse meters to be connected to Ethernet/LAN with ease and transfer energy consumption information to a server remotely. The included Sensormetrix software collects this information for manipulation of data as required. In addition graphical and spread-sheet representation of the data is straightforward with this software package. alerts, in the event of irregular usage or reaching pre-determined maximum values are standard for the Sensormetrix solutions. Also, our remote monitoring systems can be connected to many meters at a time (up to 25), making them ideal for use in buildings with many occupants, especially for billing purposes. Summary Energy usage can be monitored by either using M-Bus interface or Pulse counting methods. alerts are generated and sent to the user as a warning regarding energy usage. Analysis of energy used and billing calculations can be made if required. Deployment is very straightforward and can be carried out with minimum of fuss. Electricity Meters with Pulse Outputs Electricity Meters with M-BUS Meter Meter Meter Meter HWg-PWR Damocles 1208 Internet (Intranet) Report of electricity usage 12 The Home of Remote Monitoring and Control

13 Sensormetrix Solutions for Energy Meter Monitoring HWg-PWR - Remote Energy Meter Monitor Capable of monitoring as many as 25 M-Bus meters, HWg-PWR products can be connected to a server through Local Area Network/Ethernet/Internet to a server with our advanced software and usage details measured, analysed and downloaded automatically. M-Bus energy meter readings through Internet Graphical representation of all consumption alerts and notifications Complete data download Works with industry standard energy meters (Power, Gas, Water) Furthermore, notifications in the form of alarms can be sent when irregular usage is encountered. Reports of usage for a set period of time can also be sent simply using these products. Our systems also allow billing to be calculated, when using with tested M-Bus energy meters. Energy meters with M-Bus protocol provide many levels of data, from usage to live readings and outages and this detail can be read remotely through Ethernet connection. Graphical representation of data, as well as complete download is possible through our software, giving complete analysis of energy consumption. HWg-PWR 3/12/25 products monitor energy consumption using standard M-Bus energy meters produced by well-known manufacturers. IP Based Units - Pulse Output Meter Pulse Counters with Ethernet connection: The Damocles family of products come with a number of inputs each capable of pulse counting and transmitting this data over a Local Area Network to a PC/Server. Work with any energy meter with pulse output The pulse output of the energy meter is connected to one of the inputs of the Damocles family. Each input can be connected to a meter, making it possible that up to 24 meters are monitored with one Damocles unit. There are three products in this family: Damocles: 2404i: 24 Inputs Damocles: 1208: 12 Inputs Damocles Mini: 4 Inputs The Damocles then works as a pulse counter with Ethernet output PDMS Software (see software section) allows conversion of pulses to energy consumption, enabling analysis of the data *For more information regarding M-Bus meters refer to our website. Contact us on: +44 (0)

14 TRANSMIT POWER Temperature, Humidity & Illumination LAN www. sensormetrix.co.uk 12V DC AUX SENSOR TRANSMIT POWER Temperature, Humidity & Illumination LAN www. sensormetrix.co.uk 12V DC AUX SENSOR TRANSMIT POWER Temperature, Humidity & Illumination LAN www. sensormetrix.co.uk 12V DC AUX SENSOR TRANSMIT TRANSMIT TRANSMIT POWER POWER POWER Temperature, Humidity & Illumination Temperature, Humidity & Illumination Temperature, Humidity & Illumination www. sensormetrix.co.uk LAN www. sensormetrix.co.uk LAN www. sensormetrix.co.uk 12V DC LAN AUX 12V DC SENSOR AUX 12V DC SENSOR AUX SENSOR Flood and Water-Leak Monitoring For: Server rooms, warehouses, factories, museums, galleries, storage locations Water leak or flood damage is often very costly so it s well worth making sure you re protected against any potential risk from water leak or flooding. It s not just your expensive electrical systems or data that s prone to water damage but also the interior of the room with carpets, wall and even flooring at risk. Sensormetrix has a number of reliable and tested solutions that will alert you through or SMS before a leak or flood becomes critical and puts your systems at risk. These systems are simple to install and use. They have proven to be a very reliable and low cost way of ensuring that warnings are sent in a timely fashion before disaster happens. Methods of Sensing Flood and Water-Leak There are two types of sensors that can be used to detect water. The low cost versions detect presence of water in a small localised point. The more sophisticated sensors will detect water presence along a length of sensing cable. This cable can be as long as 98m. Alarm Methods Alarms can be sent in the form of , SMS or a phone call. We have a range of products for both connecting to a local area network and to the GSM network. Both send alerts via or text in the event of a user defined water ingress or flood. Also in our range are products that just give a relay output that connect to your existing warning system if required. For companies that use monitoring services such as Nagios, Cacti, What s up Gold or others, we also offer state of the art, proven equipment that connects seamlessly to these monitoring services. All plugin software is available free of charge. Summary Presence of water or any conductive liquid can be detected and or SMS alerts sent quickly and efficiently. Coverage can be from a single spot to a large area to ensure that all vulnerable areas are covered. Ethernet Websensor EM01b HVAC Monitor Websensor EM01b HVAC Monitor Websensor EM01b HVAC Monitor Websensor Websensor EM01b HVAC Monitor Websensor EM01b HVAC Monitor EM01b HVAC Monitor Temperature, humidity and light sensor RAID 5 Temperature, humidity and light sensor Temperature, humidity and light sensor RAID 5 Temperature, humidity and light sensor Flood sensor 14 The Home of Remote Monitoring and Control

15 Sensormetrix Solutions for Flood and Water-Leak Monitoring HWg-WLD (PoE) - Water Leak Detector HWg-WLD is a simple Flood monitor. It uses a sensing cable along which any small amount of water will trigger an alert. The HWg-WLD requires connection to Ethernet. A PoE version is also available. Detects water (or any conductive liquid) and sends alerts Detects even the smallest volume of liquid Comes with a 2m extension and 2m sensing cable. Other lengths are available In built web browser. Comes with all software Connects to your Ethernet port for communication Sends alert in the event of flooding or water-leak SNMP Trap, XML EM01b-FLD - Flood Detection Monitor A member of the highly successful and popular EM0b family of monitoring solutions, the EM01b-FLD not only detects water via its remote sensor but also measures temperature, humidity and light and will warn users if any of these parameters go outside the boundaries set by the user. Up to five separate flood sensors can be used simultaneously with an EM01b and an EShub. The ES01 flood sensor can be sited anywhere, as the length of the cable from the EM01b to the flood sensor is not critical. The EM01b family was primarily designed to work by Nagios but is also compatible with other free monitoring solutions available in the market such as Cacti and What s up Gold. Free software is available from our website to support all these monitoring suites. Works out of the box Attaches to a standard 10/100 Mbps Ethernet port Embedded web server Water detection Additional sensors for temperature, relative humidity and illumination Programmable /text alerts - means 24/7 monitoring HWg-WLD Relay - Flood Detector with Relay Output The HWg-WLD Relay is a simple Flood monitoring solution that uses a sensing cable for detection and produces a relay output as a result. Yet this product opens the possibility of getting alerts using a number of other monitoring products. The Relay output of this unit is Voltfree, meaning that it can connect to any system using a dry contact input. This can be the Ares12 GSM for SMS alerts or any of our multi-sensor products with dry contact inputs such as the 4002 or the H3531R. The HWg-WLD Relay allows monitoring systems for server rooms, warehouses, galleries, museums and storage locations to add flood monitoring to an array of sensors available from Sensormetrix. Contact us on: +44 (0)

16 Link Power I/O Monitoring and Control Over Ethernet For: Security systems, fire panels, SCADA systems, control of pumps, gates and air conditioning For many companies connecting their product to their Local Area Network is desirable and is now easily and simply done with a number of Sensormetrix Ethernet enabled products. However, there are a number of applications where the requirement is to go one step further than Ethernet enabling to enhance system capability by monitoring and controlling their equipment remotely. notifications and alerts: One requirement for many companies is to be able to get notifications or alerts in the event of some desired or undesired activity happening with their product, such as an output being triggered. This could be from CCTV security systems, alarm panels or SCADA systems. Control of other equipment: Another requirement includes control of one piece of remote system as a result of an event from another system elsewhere both connected to a Local Area Network. These include, for example, opening or closing of gates, turning ON air conditioning, or operating a pump, alas a result of an event happening at the other end. Using Sensormetrix products this is easily done remotely via Local Area Network. Summary Control of systems and products over the Ethernet network is easily achieved by Sensormetrix IO controllers with digital inputs and outputs. These products take over the decision making process and are capable of making decisions based on their inputs to control other equipment with minimal fuss. All easily set up by the user and is reliable in use. Server with control application and operater Remote control Ethernet SNMP Trap Box-2-Box Damocles 2404i 1 2 Damocles MINI ETHERNET Site 1 Gate open/close Site 2 16 The Home of Remote Monitoring and Control

17 Sensormetrix Solutions for I/O Monitoring and Control Over Ethernet Sensormetrix Solutions Our family of I/O controllers over Ethernet come in a number of shapes and sizes to meet the majority of applications and are designed and manufactured to allow for added intelligence within your system. An example of this type of operation is the ability of our I/O Controllers to respond (send notifications or trigger output relays) based on a combination of outputs received from equipment that the I/O controller is monitoring. This added intelligence allows companies to respond to a varied set of requirements based on the output(s) from their own systems. These can be remotely received via Ethernet or directly connected to the I/O Controller. Box to Box Mode Our family of Ethernet I/O controllers also work in what is called a Box-to-Box mode. This advanced and very useful feature allows remote monitoring and control in the same building at long distances by enabling one unit to be controlled by another. For example you could connect a Damocles 2404i to your Fire Panel and your LAN and connect another 2404i on your Local Area Network in another part of your building and the second unit will trigger a relay or send alerts in the event of a triggered output from your Fire Panel. The Damocles 2404i has 24 independent inputs and 4 independent outputs. This allows a large combination of inputs and outputs to be operated based on your requirements. There are two other products in this family. The Damocles 1208 has 12 inputs and 8 outputs and the Damocles Mini has 4 inputs and 2 outputs. Damocles 2404i, 1208 and Mini Three products from the same family but with a different number of Inputs and Outputs depending on the application. All work in Box-to-Box mode 2404i: 24 I/P and 4 O/P 1208: 12 I/P and 8 O/P Mini: 4 I/P and 2 O/P Features alerts based on Input(s) value(s) Pulse counting for each input Works with SNMP and Modbus I/O Controller 2 The I/O Controller 2 is a RS232/RS485 to Ethernet converter and also employs 8 Digital Inputs and 8 Digital outputs that can be used for detection and control purposes. Full RS232 or RS485 to Ethernet converter 8 Digital Inputs and 8 Digital Outputs Protocols: http, Modbus/TCP, Telnet, TCP Server, TCP Client/Server Contact us on: +44 (0)

18 Sensors A selection of sensors available from Sensormetrix Introduction We offer a range of high quality sensors with flexible combinations of housing and accuracy to be used with our monitors. Although our sensors are designed to interface with our products, they are universal enough to work with any monitoring system that complies with the output of our sensors. Below is a selection of families of sensors we offer. Each family contains a number of sensors with different characteristics. For a full coverage of the range of our sensors and their capacity, please look at the sensors section on our website. Sensors with 1 Wire Bus Interface Used with: Ethernet bases monitoring systems, GSM Based monitoring systems Robust, reliable and employing the widely used 1 Wire Bus interface these sensors are used for measuring Temperature, Humidity, Voltage and Current. These sensors come in a wide variety of cable lengths and encapsulations to enable them to be used virtually anywhere. They are low cost but have a good degree of accuracy for their price. Sensors with Dry Contact/Voltfree Output Used with: Any product that can accept a Dry Contact, low voltage input Indicating the presence of the parameter they are sensing, these sensors basically provide an ON/OFF presence at their output. Sensing parameters: Door Contact, Water Leak, Flood, Gas, Smoke, Fire, Airflow and Power. Pt1000 Temperature Sensor Probes Used with: Calibrated Data-loggers Available in a wide range of temperature ranges and used in harsh, very cold or very hot environments, these sensors are available in cabled format with lengths of 1m, 2m, 5m and 10m. The sensor tips are normally IP67 rated with PVC cables. Digital Temperature Sensor Probes Used with: Titanium Series of Ethernet based remote monitors Cabled sensors with IP67 rated sensor tip and PVC cables, these sensors are available in a wide temperature range and cable lengths and are designed to be used in the harshest of conditions. Sensors with 4-20mA or 0-10V Output Used with: Any instrument that can accept 4-20mA or 0-10V values Boxed products and also available with a display these sensors are primarily available as temperature or temperature and humidity. The current value is displayed on the LCD, as well as being available as an analogue output for instruments, loggers, monitoring systems. Sensors with RS232/RS485 output Used with: Any monitoring system that can accept RS232/RS485 Bus Mainly measuring temperature or temperature and humidity and available with an LCD display, these sensors are compatible with the popular industrial RS232 and RS485 Buses, covering long distances between sensors and the monitoring units. 18 The Home of Remote Monitoring and Control

19 Software Introduction All our products are supplied with free software that allow our customers to operate our systems. However, to allow greater flexibility, we also offer software packages that enhance the capabilities of our monitoring system. Sensormetrix offer two software packages that will automatically record measured data to provide a historical record as required by many regulations, providing an easy method of demonstrating compliance. PDMS The PDMS software package collects data obtained from the devices that it monitors and stores it automatically in a database, from which data can be viewed graphically and/or exported to Microsoft Excel as a report containing graphs. Data is collected at a user programmable time interval from any unit that PDMS can reach using an IP connection. Units on the local network are automatically detected; those on external networks can be explicitly added. For data-loggers on external networks, PDMS has a unique way of collecting data via as a neat solution for avoiding firewall issues. PDMS is not limited in the number of units or sensors for which it can log and record data. Viewing data graphically may be done directly from the PDMS package. Individual sensors can be selected for graphing, and the time interval of the window into the data is completely programmable. Any or all devices and sensors being monitored can be selected to be included in a.xls file format export to Excel, where all logged values are displayed together with a graphical view of the data. Alarm conditions may be included in the reports. Advanced options allow current values recorded by PDMS to be viewed on a web interface, allowing viewing of the data from many different computers, including those off site. XLS reports may also be automatically generated and ed. CDB The CDB software package listens for SOAP messages containing data to be logged to be received, and stores the data into an SQL database as it is received. This received data can be both measurements and alarm condition information. The advantage of sending data via SOAP is that remote locations will not need special configuration to pass the SOAP messages through the firewall. Only the firewall at the server will need to be configured, making logging of multiple sites very simple to set up. As data is expected to be received periodically, the user may be warned if data appears to be stale due to a network connection problem. The server is able to send out s (and optionally SMS text messages) when alarm events occur, either within the remote units being monitored or from the application itself. Data logged into the database may be viewed using a database viewer program, DBV. Measurements over specific time periods can be displayed both as a table of data and as graphs. The start and end points in time are configurable down to the second, as are the units and sensors to be displayed. Statistical information on the data windowed can be displayed. The ability to show the maximum and minimum values is especially useful to demonstrate compliance to regulations in the food and medical industries. Data may be exported as pdf reports or as a CSV file for import into other programs such as excel. When alerts occur, as well as sending or text messages, audio and visual alerts can be created on the computer which is being used to view data. It is possible for a user to cancel these alarms, and the cancellation event may be logged (including details of the user who cancelled the alarm). Contact us on: +44 (0)

20 sales fax accounts +44 (0) (0) (0) Basingstoke Road Spencers Wood Reading Berkshire RG7 1PW United Kingdom Company No VAT Registration No. GB A division of Sequoia Technology Group Limited Rev 1.1