Thank you for your interest in Phoenix Composite Solutions, LLC.

Transcription

1 Phoenix Composite Solutions, LLC FAA Repair Station - 4PR734 Dear Quality Manager, Thank you for your interest in Phoenix Composite Solutions, LLC. Due to the extensive number of customer survey requests, we receive and the short time requested for their return, we are now responding with a standard form to address the questions most often asked. Thank you for your understanding and acceptance of our self survey to fulfill your vendor surveillance requirements. If you need any further information please do not hesitate to contact me at or by at [email protected]. Sincerely, Jeffrey Hansen Quality Manager / Chief Inspector Phoenix Composite Solutions, LLC Phone: Cell: Fax: [email protected] 5911 Mission Street Oscoda, MI Phone: Fax:

2 PHOENI COMPOSITE SOLUTIONS, LLC FAA Repair Station 4PR734 Self Survey Introduction: Phoenix Composites Solutions, LLC (PCS), was founded in early 2003 and is a non-union, female owned HUB-Zone qualified small business concern located in Northeast Michigan. We are committed to quality and have been registrared to AS9100 / ISO 9001since November Phoenix Composite Solutions is also a certificated FAA Repair Station, (FAA Certificate; 4PR734) with European Aviation Safety Agency (EASA; ), Civil Aviation Administration of China (CAAC; F ) and Civil Aviation Authority of Vietnam (CAAV; VN- 047Nn/CAAV) approvals. Our customers have recognized our capabilities to manufacture and repair composite and sheet metal parts and components, including fan cases, radomes; with transmissivity testing, thrust reversers, turbine engine test equipment such as Bellmouths and substitute thrust reversers, bond tooling, Heat Shields, and MRI Headrests and arm rests. The Phoenix Composite Solutions team has experience with numerous resin systems and composite materials including; BMI, Poly Amides, Kevlar, Carbon, and fiberglass prepregs and laminates, We also have a very capable in-house Machine Shop with CNC machining capabilities and certified welders. Our support activities such as Phosphoric Acid Anodizing, autoclave, and clean room activities have been approved by our major aerospace customers for repair and manufacturing operations. We are constantly improving and increasing our capabilities to support our existing and future customers. Thank you for your interest in Phoenix Composite Solutions, LLC Mission Drive Oscoda, Michigan Phone: Fax: Page 1 of 10

3 PHOENI COMPOSITE SOLUTIONS, LLC FAA Repair Station 4PR734 Self Survey Company Name: Phoenix Composite Solutions, LLC Address: 5911 Mission Street City: State: Country: Zip Code: Oscoda Web Page: Michigan Phone: USA Fax: FAA Certificate: EASA Certificate: 4PR AS9100: 2009 / ISO 9001:2008 Certificate: C Phoenix Composite Solutions Contacts: President / General Manager / Accountable Manager: John Scanlon [email protected] Quality Manager / Chief Inspector: Jeffrey Hansen [email protected] Director Aerospace Repair Station Vice President Sales and Product Development: Marshall Olger [email protected] Operations Planning Manager Aerospace Repair Station: Jill Brown [email protected] Purchasing Manager: Sandy Scanlon [email protected] Human Resources Manager: Dennis Kelly [email protected] Controller (accounting and financial information) : John Chagnon [email protected] Vietnam Certificate: China Certificate: VN-047NN/CAAV F ITAR Registration Code: M26937 Phone: , ext 202 Phone: , ext 207 Phone: , ext 209 Phone: , ext 215 Phone: , ext 218 Phone: , ext 216 Phone: , ext Mission Drive Oscoda, Michigan Phone: Fax: Page 2 of 10

4 PHOENI COMPOSITE SOLUTIONS, LLC FAA Repair Station 4PR734 Self Survey 1. CERTIFICATIONS Yes No N/A A. Does the vendor hold an FAA Air Agency, or Transport Canada AMO Certificate? B. Are all required certificates, operations specifications, licenses, repairman certificates, and registrations available for review? C. If the repair station has Limited Ratings does the vendor have a capabilities listing that satisfies the requirement of 14 CFR Part 145? D. Does the vendor have an FAA approved and active anti-drug & alcohol misuse prevention plan? Consortium E. Does the vendor have a procedure to: 1. Ensure that their U.S. based sub-contracted maintenance / preventive maintenance providers; at all tiers (certificated and non-certificated), are actively participating in a U.S. Department of Transportation anti-drug and alcohol misuse prevention program? 2. Obtain and subsequently retain; for a minimum of three years from date of work, proof of anti-drug and alcohol misuse prevention program compliance for each subcontract maintenance provider at all tiers at which work is performed. 2. QUALITY CONTROL PROGRAMS Yes No N/A A. Does the vendor have a current Quality Control Manual that includes: 1. Descriptions of the systems and procedures used for: a. Inspecting incoming raw material to ensure acceptable quality? b. Performing preliminary inspection of all articles that are maintained? c. Inspection of all articles that have been involved in an accident for hidden damage before maintenance, or alteration is performed? d. Establishing and maintaining proficiency for inspection personnel? e. Establishing and maintaining current technical data for maintaining articles? f. Qualifying and surveying non-certificated persons who perform maintenance, preventive maintenance, or alterations for the repair station? g. Performing final inspection and return to service of maintained articles? h. Calibrating measuring and test equipment used to maintain articles, including the intervals at which the equipment will be calibrated? i. Taking corrective action on discrepancies? j. Procedures for revising the Quality Control Manual? 2. References where applicable to manufacturer s inspection standards? 3. Samples of and instructions for completing maintenance forms, or reference to a separate forms manual? B. Is the Quality Control Manual Current? C. Does the vendor s program include procedures for controlling shelf life and scrapped parts? 5911 Mission Drive Oscoda, Michigan Phone: Fax: Page 3 of 10

5 PHOENI COMPOSITE SOLUTIONS, LLC FAA Repair Station 4PR734 Self Survey QUALITY CONTROL PROGRAMS (continued) Yes No N/A D. Does the vendor have a Repair Station Manual that contains the following: 1. The vendor s organizational structure including: a. Each management position with authority to act on behalf of the repair station? b. The area of responsibility assigned to each management position? c. Duties, responsibilities, and authority of each management position? d. An organizational chart 2. Procedures for maintaining the roster? 3. A description of the vendor s operations, including housing, facilities, equipment, and materials? 4. Procedures for: a. Revising the capabilities list and notifying the CHDO of revisions to the list? b. Performing a self-evaluation prior to revising the capabilities list? 5. Procedures for revising the training program and submitting revisions to the CHDO for approval (Effective beginning April 6, 2006)? 6. Procedures to govern work performed at another location? 7. Procedures for maintenance, preventive maintenance, alterations, and inspections performed? 8. Procedures for maintaining and revising contract maintenance information and notifying the FAA? 9. A description of record-keeping system? 10. Procedures for revising the repair stations manual and notifying the FAA? 11. A description of the system used to identify and control sections of the Repair Station Manual? E. Is the Repair Station Manual current and available to employees? F. Does the vendor have an internal audit and surveillance function? G. Does the internal audit function ensure compliance with customer specifications? H. Does the internal audit program assure appropriate corrective action? I. Does the vendor maintain a file of audits performed and corrective action for three years? 1. Is it available to the auditor? J. Does the vendor maintain a list of subcontracted maintenance functions and agencies which includes the type of certificate and ratings, if any, held by each facility? K. Does the vendor ensure that subcontractor quality meets customer specifications and legal requirements? L. Does the vendor maintain certification on subcontractor work? 5911 Mission Drive Oscoda, Michigan Phone: Fax: Page 4 of 10

6 PHOENI COMPOSITE SOLUTIONS, LLC FAA Repair Station 4PR734 Self Survey QUALITY CONTROL PROGRAMS (continued) Yes No N/A M. Does the vendor have a contract allowing the FAA to inspect non-certificated subcontractors? N. Does the vendor have a procedure for reporting defects or un-airworthy conditions to the customer and the FAA? 3. INSPECTION PROGRAMS Yes No N/A A. Does the vendor have an acceptable receiving inspection system? B. Does the vendor have an acceptable system for controlling stamps, for both inspection and production personnel? C. Are acceptable sampling procedures adequate to ensure quality? 4. PERSONNEL Yes No N/A A. Has the vendor designated an employee as the Accountable Manager? B. Does the repair station roster(s) identify all management, supervisory, and inspection personnel? C. Does the roster identify all personnel authorized for return-to-service? D. Does the repair station have an employment summary for all personnel listed on the repair station roster? E. Do the vendor s supervisory personnel satisfy the requirements of 14 CFR Part 145? F. Do the vendor s inspection personnel satisfy the requirements of 14 CFR Part 145? G. Do the vendor s return-to-service personnel satisfy the requirements of 14 CFR Part 145? H. Are specific individuals, by title, responsible for the following programs? 1. Technical Data? 2. Shelf life? 3. Calibrated tooling? 4. Scrap parts? I. Is there a back-up person identified by title for the Technical Data, Shelf life, Calibrated tooling, and Scrap parts programs? 5. TECHNICAL DATA PROGRAM Yes No N/A A. Does the vendor have the required shop manuals and specifications to perform the repair/overhaul in accordance with customer specifications? B. Are there, established approved procedures controlling revisions in manuals deviating from OEM specifications? (E.g., EO or EA) C. Does the vendor have a documented system to ensure technical data is current? D. Does the Company have SFAR authorization? 5911 Mission Drive Oscoda, Michigan Phone: Fax: Page 5 of 10

7 PHOENI COMPOSITE SOLUTIONS, LLC FAA Repair Station 4PR734 Self Survey TECHNICAL DATA PROGRAM (continued) Yes No N/A E. Does the vendor have records of manual revisions? F. Are manual revisions up to date? G. Is the technical data properly identified and available to mechanics? H. Does the vendor have a system to control working copies of manuals to ensure they are revised with the masters? I. Is technical data stored in a manner that will protect it from dirt and damage? J. Are adequate viewing devices in good condition and available for viewing technical data? 6. SHELF LIFE PROGRAM Yes No N/A A. Does the vendor have a documented shelf life program? B. Does the program list parts and materials that have shelf life limits? C. Does each shelf life item have the shelf life expiration limit displayed? D. Is there an adequate system to assure that no item will be issued or used past its expiration date? E. Were items sampled for shelf life within limits? 7. CALIBRATION PROGRAM Yes No N/A A. Does the vendor have a documented calibration program? B. Are tools requiring calibration identified and on the tool calibration list? C. Are standards used to calibrate tools acceptable to the FAA? E.g., NIST D. Is there a system to identify each tool in the program, its calibration frequency and its calibration due date? E. Does the vendor have a procedure for identifying, controlling and/or preventing out-of-service and due-for-calibration tools and equipment from being used? F. Does the vendor have a procedure to control the calibration of personal tools? G. Did a sample check of calibrated tooling indicate that the tooling is within calibration? H. Are the tools and test equipment in a serviceable condition? I. Do records: 1. Show date calibrated? 2. Show calibration due date? 3. Identify individual or vendor that performed calibration or check? 4. Contain a calibration certificate for each item calibrated by an outside agency? 5. Record details of adjustments and repairs? 6. Show the P/N and S/N of the standard used to perform the calibration? 5911 Mission Drive Oscoda, Michigan Phone: Fax: Page 6 of 10

8 PHOENI COMPOSITE SOLUTIONS, LLC FAA Repair Station 4PR734 Self Survey 8. TRAINING Yes No N/A A. Does the vendor have a documented training program? B. Does the training program include all mechanics, inspectors, and technical supervisors? C. Are mechanics, inspectors, and supervisors properly trained, authorized, and certificated, if required, for the work they perform? D. Is formal and OJT training documented? E. Are training records for mechanics, inspectors, and supervisors retained for two years after the person leaves the company? 9. HOUSING AND FACILITIES Yes No N/A A. If the vendor deals in non-aircraft parts, materials, and/or maintenance activities, are they adequately segregated from the aircraft functions? B. Does the vendor have: 1. Sufficient workspace and areas for the proper segregation and protection of articles? 2. Segregated work areas enabling environmentally hazardous or sensitive operations such as painting, cleaning, welding, avionics work, and machining to be done properly and in a manner that does not adversely affect other maintenance? 3. Suitable racks, hoists, trays, stands, and other segregation means for the storage and protection of all articles? 4. Space sufficient to segregate articles and materials stocked for installation from those undergoing maintenance, preventive maintenance, or alterations? 5. Ventilation, lighting, and control of temperature, humidity, and other climatic conditions sufficient to ensure personnel perform maintenance, preventive maintenance, or alterations to the standard required by the part? 6. Areas for receiving and for shipping customers units with adequate space, lighting, shelving, security, and fire protection to accommodate customers units in a manner that will preclude damage, loss, or theft? 7. Adequate and appropriate storage area to safely store customer s reusable shipping containers and to protect them from environmental damage? C. If the vendor performs maintenance, preventive maintenance, or alterations on articles outside of its housing, does it provide suitable facilities that are acceptable to the FAA and its customers Mission Drive Oscoda, Michigan Phone: Fax: Page 7 of 10

9 PHOENI COMPOSITE SOLUTIONS, LLC FAA Repair Station 4PR734 Self Survey 10. SAFETY/SECURITY/FIRE PROTECTION Yes No N/A A. Does the vendor provide adequate security for parts in its possession? B. Does management or an outside vendor review the security system periodically? C. Are fire protection devices inspected periodically? D. Are fire stations identified and extinguishers in serviceable condition? E. Are fire lanes, doors and fire extinguishers clear of obstructions? F. Are safety guards in place on power equipment? G. Are the vendor s shop operations conducted in a safe manner and environment? 11. STORAGE Yes No N/A A. Are parts and materials correctly identified and properly stored? B. Do parts in bins match part numbers on bins? C. Does the vendor have a quarantine area for rejected parts and materials awaiting disposition? D. Are parts and material properly protected from damage and deterioration? E. Are flammable, toxic, or volatile materials properly identified and stored? F. Are sensitive parts and equipment properly packaged, identified, and stored to protect from damage and contamination? G. Are high-pressure bottles correctly labeled, properly stored and secured? H. Does the vendor maintain traceability certification on all parts and raw materials? 12. WORK PROCESSING Yes No N/A A. Does the vendor observe duty time limitations? B. Does the vendor only perform work for which it is authorized on its Operations Specifications? C. Does the vendor have adequate tooling and test equipment to perform the work? D. Where a vendor uses specified OEM test equipment and/or test equipment other than that specified by the OEM, does that vendor: 1. Have an operating manual and maintenance manual for the equipment? 2. Perform maintenance and servicing per the manual? 3. Maintain maintenance and servicing records for two years? 4. Where applicable, list the equipment in their calibration program? E. Where a vendor uses non-oem specified equipment, is the equipment properly certified? F. Are adequate tools and current manuals available or at the mechanics workstations? 5911 Mission Drive Oscoda, Michigan Phone: Fax: Page 8 of 10

10 PHOENI COMPOSITE SOLUTIONS, LLC FAA Repair Station 4PR734 Self Survey WORK PROCESSING (continued) Yes No N/A G. Are customer parts properly identified throughout the maintenance actions and in storage? H. Is there a work turnover procedure used? I. Does the shop segregate serviceable from unserviceable components? J. Does the facility provide adequate protection of parts in work? E.g., filtered air or clean room depending on type of part? K. Are smoking, eating, and drinking forbidden in the work area or does the vendor have a written program to ensure units are protected from contamination? L. Are fluid dispensing cans and servicing units properly identified? M. Are the vendor s work records complete, in order, and legible? N. Do the records contain: 1. The description of the work performed or a reference to data, including revision level; acceptable to the administrator? 2. The date of completion of the work performed? 3. The name of the person performing the work? 4. The name of the person inspecting the work? 5. The signature, certificate number of the person returning the article to service? P. Are all test and inspection records in work package? Q. Does the vendor s return-to-service document meet customer and FAA requirements? R. Does the vendor s record keeping system and retention time meet 14 CFR requirements? 13. SHIPPING Yes No N/A A. Are components returned to the customer shipped in an appropriate container or as specified by the customer? B. Does the vendor verify that all identifying data such as P/N, S/N, nomenclature, etc. on the documentation and data plate match? 14. SCRAPPED PARTS Yes No N/A A. Does the vendor have a documented procedure to assure that scrapped parts are either returned to the customer or mutilated beyond repair? B. Does the vendor maintain a record of scrapped life limited parts scrapped for at least two years? C. Does the record include P/N, S/N, and date of scrapping? 5911 Mission Drive Oscoda, Michigan Phone: Fax: Page 9 of 10

11 PHOENI COMPOSITE SOLUTIONS, LLC FAA Repair Station 4PR734 Self Survey Company Information: Total Number of Employees: Number of Inspectors: Number of RII Inspectors: Engineering: Date of Last FAA Audit: Number of Supervisors: Number of Production Personnel: Number of Support Staff: Certificated Personnel: Date of Last Registrar Audit: Principle Products and Services: Special Processes: Major Equipment: Airline and other Customers: Sub-contracted Maintenance: Comments: Name of person completing this form: Jeffrey Hansen Signature: Title: Quality Manager 5911 Mission Drive Oscoda, Michigan Phone: Fax: Page 10 of 10

12

13 U.S. Department of Transportation Federal Aviation Administration Operations Specifications Table of Contents Part A HQ CONTROL DATE EFFECTIVE DATE AMENDMENT NUMBER 001 Issuance and Applicability 01/31/ /18/ Definitions and Abbreviations 01/12/ /18/ Ratings and Limitations 01/30/ /31/ Summary of Special Authorizations and Limitations 09/23/ /02/ Designated Persons 12/19/ /11/ Electronic/Digital Recordkeeping System, Electronic/Digital Signature, and Electronic Media 11/16/ /15/ Additional Fixed Locations 11/16/ /30/ Antidrug and Alcohol Misuse Prevention Program 07/17/ /14/ Phoenix Composite Solutions, LLC Part A-1 Print Date: 7/31/2013 Certificate No.: 4PR734

14

15

16

17

18

19 U.S. Department of Transportation Federal Aviation Administration Operations Specifications A003. Ratings and Limitations HQ Control: 01/30/2004 HQ Revision: 010 The Certificate Holder is authorized the following Ratings and/or Limitations: Class Ratings None authorized Limited Ratings Rating Manufacturer Make/Model Limitations Airframe Airbus A300, A310, A318, A319, A320, A321, A330, A340, All Series Boeing B-707, 717, 720, 727, 737, 747, 757, 767, 777, All Series McDonnell Douglas Gulfstream Embraer Limited to repair/overhaul of flight control surfaces and attached components, wing leading edge assemblies and attached components including de-icer boots, panels, acoustic panels, fillets, doors and attached components, tailcones, fairings, cowlings, inlets, thrust reversers, exhaust nozzles and plugs, stabilizers, liners, floors, struts and attachments, wing tips, radomes, landing gear doors and landing gear components, interior panels and parts, environmental air ducting and water storage tanks Limited to repair/overhaul of flight control surfaces and attached components, wing leading edge assemblies and attached components including de-icer boots, panels, acoustic panels, fillets, doors and attached components, tailcones, fairings, cowlings, inlets, thrust reversers, exhaust nozzles and plugs, stabilizers, liners, floors, struts and attachments, wing tips, radomes, landing gear doors and landing gear components, interior panels and parts, environmental air ducting and water storage tanks DC-8, DC-9, DC-10, Limited to repair/overhaul of flight control surfaces and MD-11, MD-81, MD- attached components, wing leading edge assemblies and 82, MD-83, MD-87, attached components including de-icer boots, panels, MD-88, MD-90, All acoustic panels, fillets, doors and attached components, Series tailcones, fairings, cowlings, inlets, thrust reversers, exhaust nozzles and plugs, stabilizers, liners, floors, struts and attachments, wing tips, radomes, landing gear doors and landing gear components, interior panels and parts, environmental air ducting and water storage tanks G-II, GIII, GIV, GV, All Series EMB-120, EMB-135, EMB-145, ERJ 170, ERJ 190, All Series Limited to repair/overhaul of flight control surfaces and attached components, wing leading edge assemblies and attached components including de-icer boots, panels, acoustic panels, fillets, doors and attached components, tailcones, fairings, cowlings, inlets, thrust reversers, exhaust nozzles and plugs, stabilizers, liners, floors, struts and attachments, wing tips, radomes, landing gear doors and landing gear components, interior panels and parts, environmental air ducting and water storage tanks Limited to repair/overhaul of flight control surfaces and attached components, wing leading edge assemblies and attached components including de-icer boots, panels, Phoenix Composite Solutions, LLC A003-1 Amdt. No: 9 Certificate No.: 4PR734

20 U.S. Department of Transportation Federal Aviation Administration Operations Specifications Rating Manufacturer Make/Model Limitations acoustic panels, fillets, doors and attached components, tailcones, fairings, cowlings, inlets, thrust reversers, exhaust nozzles and plugs, stabilizers, liners, floors, struts and attachments, wing tips, radomes, landing gear doors and landing gear components, interior panels and parts, environmental air ducting and water storage tanks Canadair CL-600 All Series Limited to repair/overhaul of flight control surfaces and attached components, wing leading edge assemblies and attached components including de-icer boots, panels, acoustic panels, fillets, doors and attached components, tailcones, fairings, cowlings, inlets, thrust reversers, exhaust nozzles and plugs, stabilizers, liners, floors, struts and attachments, wing tips, radomes, landing gear doors and landing gear components, interior panels and parts, environmental air ducting and water storage tanks British Aerospace Jetstream 3101 Raytheon Aircraft DH-125, HS-125, BAE-125 And Hawker, All Series Hawker Beechcraft 1900 Series Construcciones Aeronauticas, S.A. LearJet LR-20, 30, 40, 50, 60 Series Limited to repair/overhaul of flight control surfaces and attached components, wing leading edge assemblies and attached components including de-icer boots, panels, acoustic panels, fillets, doors and attached components, tailcones, fairings, cowlings, inlets, thrust reversers, exhaust nozzles and plugs, stabilizers, liners, floors, struts and attachments, wing tips, radomes, landing gear doors and landing gear components, interior panels and parts, environmental air ducting and water storage tanks Limited to repair/overhaul of flight control surfaces and attached components, wing leading edge assemblies and attached components including de-icer boots, panels, acoustic panels, fillets, doors and attached components, tailcones, fairings, cowlings, inlets, thrust reversers, exhaust nozzles and plugs, stabilizers, liners, floors, struts and attachments, wing tips, radomes, landing gear doors and landing gear components, interior panels and parts, environmental air ducting and water storage tanks Limited to repair/overhaul of flight control surfaces and attached components, wing leading edge assemblies and attached components including de-icer boots, panels, acoustic panels, fillets, doors and attached components, tailcones, fairings, cowlings, inlets, thrust reversers, exhaust nozzles and plugs, stabilizers, liners, floors, struts and attachments, wing tips, radomes, landing gear doors and landing gear components, interior panels and parts, environmental air ducting and water storage tanks C-212 Series Limited to repair/overhaul of flight control surfaces and attached components, wing leading edge assemblies and attached components including de-icer boots, panels, acoustic panels, fillets, doors and attached components, tailcones, fairings, cowlings, inlets, thrust reversers, exhaust nozzles and plugs, stabilizers, liners, floors, struts and attachments, wing tips, radomes, landing gear doors and landing gear components, interior panels and parts, environmental air ducting and water storage tanks Limited to repair/overhaul of flight control surfaces and attached components, wing leading edge assemblies and attached components including de-icer boots, panels, Phoenix Composite Solutions, LLC A003-2 Amdt. No: 9 Certificate No.: 4PR734

21 U.S. Department of Transportation Federal Aviation Administration Operations Specifications Rating Manufacturer Make/Model Limitations FOKKER F.27 Series, F.28 Series Aerospatiale ATR-42 Series, ATR-72 Series M7 Aerospace LP SA226, SA227, SA26, All Series Powerplant From the accepted Capability List, as amended. Aircraft Fabric Work Boeing, McDonnell Douglas From the accepted Capability List, as amended. All acoustic panels, fillets, doors and attached components, tailcones, fairings, cowlings, inlets, thrust reversers, exhaust nozzles and plugs, stabilizers, liners, floors, struts and attachments, wing tips, radomes, landing gear doors and landing gear components, interior panels and parts, environmental air ducting and water storage tanks Limited to repair/overhaul of flight control surfaces and attached components, wing leading edge assemblies and attached components including de-icer boots, panels, acoustic panels, fillets, doors and attached components, tailcones, fairings, cowlings, inlets, thrust reversers, exhaust nozzles and plugs, stabilizers, liners, floors, struts and attachments, wing tips, radomes, landing gear doors and landing gear components, interior panels and parts, environmental air ducting and water storage tanks Limited to repair/overhaul of flight control surfaces and attached components, wing leading edge assemblies and attached components including de-icer boots, panels, acoustic panels, fillets, doors and attached components, tailcones, fairings, cowlings, inlets, thrust reversers, exhaust nozzles and plugs, stabilizers, liners, floors, struts and attachments, wing tips, radomes, landing gear doors and landing gear components, interior panels and parts, environmental air ducting and water storage tanks Limited to repair/overhaul of flight control surfaces and attached components, wing leading edge assemblies and attached components including de-icer boots, panels, acoustic panels, fillets, doors and attached components, tailcones, fairings, cowlings, inlets, thrust reversers, exhaust nozzles and plugs, stabilizers, liners, floors, struts and attachments, wing tips, radomes, landing gear doors and landing gear components, interior panels and parts, environmental air ducting and water storage tanks Limited to maintenance of: metal to metal bonding, metal to metal honeycomb composite repair, composite to composite bonding, composite to metal bonding and metal repairs. Limited to aircraft fabric maintenance/replacement and associated component disassembly/assembly, excluding removal or installation, in accordance with manufacturers' technical data, or other data accepted or approved by the Administrator. Limited Ratings - Specialized Services Rating Non-Destructive Inspection, Testing and Processing Specifications Limitations ASTM E-1417 Liquid Penetrant only; Use the methods, techniques, and practices prescribed in the current manufacturers maintenance manual or Instructions for Continued Airworthiness, or other methods, techniques, and practices acceptable to the Administrator. Phoenix Composite Solutions, LLC A003-3 Amdt. No: 9 Certificate No.: 4PR734

22

23

24

25

26 U.S. Department of Transportation Federal Aviation Administration Operations Specifications A101. Additional Fixed Locations HQ Control: 11/16/2004 HQ Revision: 010 a. The certificate holder may perform work at the following additional fixed location(s) listed in Table 1, provided it has the facilities, material, equipment and technical personnel to perform the work authorized : Table 1 Additional Location Address(es) Address City State Country Postal Code 3951 East Arc Street, Building 289 Oscoda Michigan UNITED STATES North Michigan Avenue Building 394 Oscoda Michigan UNITED STATES b. This authorizes the certificate holder to use multiple locations to perform its operations under a single certificate. c. This authorization does not constitute a geographic authorization for work performed at another location. d. The certificate holder may perform continuous operations at the facilities listed in Table 1 above. e. Privileges of a line station, as set forth by any EASA line station rating, are authorized at these locations, as applicable. f. All the authorizations and exemptions authorized for the certificate holder apply at these locations, as applicable. Phoenix Composite Solutions, LLC A101-1 Amdt. No: 4 Certificate No.: 4PR734

27

28

29

30

31

32

33

34

35

36