QuickSpecs. Models HP FlexFabric V Switch Chassis

Transcription

1 Overview Models HP FlexFabric V Switch Chassis JG608A Key features High-performance CLOS-based switching architecture Large layer 2 scaling with TRILL and HP IRF Feature-rich routing with IPv4/IPv6, MPLS, and QoS Enhanced modularity with control and data plane separation High 10GbE and 40GbE density; 100GbE ready across 7.7 Tb/s switch fabric Product overview The is a high-performance data center aggregation switch that provides line-rate, high-density 10GbE and 40GbE connectivity designed for cost-effective end-of-row (EoR) and small core deployments. With latency as low as 3 ìs, the can scale to 384 1/10GbE, 192 1/10GBASE-T or 64 40GbE ports. The switch delivers up to 7.7 Tb/s switching capacity and 5.8 Bpps forwarding throughput. A broad variety of interface options is available, including 1/10GbE, 1/10GBASE-T and 40GbE. Ready for software-defined networking (SDN), the switch supports full Layer 2 and 3 features, including advanced features such as TRansparent Interconnection of Lots of Links (TRILL) and Intelligent Resilient Framework (IRF), which provides the ability to build large, resilient switching fabrics. The also supports fully redundant and hot-swappable components to complement its other enterprise-class capabilities. Features and benefits Data center optimized Scalable Layer 2 fabrics builds flexible, resilient and scalable Layer 2 fabrics with TRILL together with HP IRF NEW Multitenant Device Context (MDC) virtualizes a physical switch into multiple logical devices, with each logical switch having its own processes, configuration, and administration Data Center Bridging (DCB) protocols supports IEEE 802.1Qaz Data Center Bridging Exchange (DCBX) and Enhanced Transmission Selection (ETS) and IEEE 802.1Qbb Priority Flow Control (PFC) for converged fabrics Fibre Channel over Ethernet (FCoE) capabilities delivers support for FCoE, including expansion, fabric, trunk VF and N ports, and aggregation of E-port and N-port virtualization Edge Virtual Bridging (EVB) with Virtual Ethernet Port Aggregator (VEPA) support provides connectivity into the virtualization-ready data center environment Front-to-back airflow design accomodates deployment in data centers utilizing hot-cold aisles Performance High-performance fully-distributed architecture DA Worldwide Version 6 March 31, 2014 Page 1

2 Overview delivers up to 7.7 Tbps switching capacity and 5.76 Bpps throughput with non-blocking wire-speed performance and latency as low as 3 microseconds High-density 1/10GbE and 40GbE interface connectivity offers up to eight interface module slots to scale up to 384 1GbE/10GbE and 64 40GbE ports Scalable system design provides investment protection to support future technologies and higher-speed connectivity, as the switch is designed for increased backplane bandwidth Product architecture Advanced Comware modular operating system brings native high stability, independent process monitoring and restart through the modular design and multiple processes of HP Comware v7 software; supports enhanced serviceability functions In-Service Software Upgrade (ISSU) provides an upgrade of the entire chassis, or an individual task or process, with zero packet loss Distributed architecture with separation of data and control planes delivers enhanced fault tolerance and facilitates continuous operation and zero service disruption during planned or unplanned control-plane events Resiliency and high availability Intelligent Resilient Framework (IRF) creates virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router; switches do not have to be co-located and can be part of a disaster-recovery system; servers or switches can be attached using standard LACP for automatic load balancing and high availability; can eliminate the need for complex protocols like Spanning Tree Protocol, Equal-Cost Multipath (ECMP), or VRRP, thereby simplifying network operation Redundant/load-sharing fabrics, management, fan assemblies, and power supplies increases total performance and power available while providing hitless, stateful failover Hot-swappable modules allows replacement of modules without any impact on other modules Graceful restart allows routers to indicate to others their capability to maintain a routing table during a temporary shutdown and significantly reduces convergence times upon recovery; supports OSPF, BGP, and IS-IS Virtual Router Redundancy Protocol (VRRP) allows groups of two routers to dynamically back each other up to create highly available routed environments Device Link Detection Protocol (DLDP) monitors link connectivity and shuts down ports at both ends if unidirectional traffic is detected, preventing loops in STP-based networks Hitless patch upgrades allows patches and new service features to be installed without restarting the equipment, increasing network uptime and facilitating maintenance IEEE 802.3ad Link Aggregation Control Protocol (LACP) supports up to 128 trunks, each with 8 links per trunk; supports static or dynamic groups and a user-selectable hashing algorithm Passive design system delivers increased system reliability as backplane has no active components Ultrafast protocol convergence (subsecond) with standard-based failure detection Bidirectional Forwarding Detection (BFD) enables link connectivity monitoring and reduces network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, MPLS, and IRF Layer 2 switching DA Worldwide Version 6 March 31, 2014 Page 2

3 Overview VLAN supports up to 4,094 port-based or IEEE 802.1Q-based VLANs; also supports MAC-based VLANs, protocol-based VLANs, and IPsubnet-based VLANs for added flexibility Bridge Protocol Data Unit (BPDU) tunneling transmits Spanning Tree Protocol BPDUs transparently, allowing correct tree calculations across service providers, WANs, or MANs Port mirroring duplicates port traffic (ingress and egress) to a local or remote monitoring port; supports four mirroring groups, with an unlimited number of ports per group Spanning Tree Protocol (STP) supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence, and IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) protocol snooping controls and manages the flooding of multicast packets in a Layer 2 network IEEE 802.1ad QinQ and selective QinQ increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed campus or metro network Per-VLAN Spanning Tree Plus (PVST+) allows each VLAN to build a separate spanning tree to improve link bandwidth usage in network environments with multiple VLANs Isolation at data link layer with private VLANs provides, through a two-tier VLAN structure, an additional layer of protection, simplifying network configuration while saving VLAN resources Layer 3 routing Open shortest oath first (OSPF) delivers faster convergence; uses this link-state routing Interior Gateway Protocol (IGP), which supports ECMP, NSSA, and MD5 authentication for increased security and graceful restart for faster failure recovery Intermediate system to intermediate system (IS-IS) uses a path vector Interior Gateway Protocol (IGP), which is defined by the ISO organization for IS-IS routing and extended by IETF RFC 1195 to operate in both TCP/IP and the OSI reference model (Integrated IS-IS) Border Gateway Protocol 4 (BGP-4) delivers an implementation of the Exterior Gateway Protocol (EGP) utilizing path vectors; uses TCP for enhanced reliability for the route discovery process; reduces bandwidth consumption by advertising only incremental updates; supports extensive policies for increased flexibility; scales to very large networks Multiprotocol Label Switching (MPLS) uses BGP to advertise routes across Label Switched Paths (LSPs), but uses simple labels to forward packets from any Layer 2 or Layer 3 protocol, which reduces complexity and increases performance; supports graceful restart for reduced failure impact; supports LSP tunneling and multilevel stacks Dual IP stack maintains separate stacks for IPv4 and IPv6 to ease the transition from an IPv4-only network to an IPv6-only network design Equal-Cost Multipath (ECMP) enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth Policy-based routing makes routing decisions based on policies set by the network administrator Static IPv4 routing provides simple manually configured IPv4 routing Routing Information Protocol (RIP) DA Worldwide Version 6 March 31, 2014 Page 3

4 Overview uses a distance vector algorithm with UDP packets for route determination; supports RIPv1 and RIPv2 routing; includes loop protection IP performance optimization provides a set of tools to improve the performance of IPv4 networks; includes directed broadcasts, customization of TCP parameters, support of ICNP error packets, and extensive display capabilities Unicast Reverse Path Forwarding (urpf) limits erroneous or malicious traffic in accordance with RFC 3074 Static IPv6 routing provides simple, manually configured IPv6 routing Routing Information Protocol next generation (RIPng) extends RIPv2 to support IPv6 addressing OSPFv3 provides OSPF support for IPv6 IS-IS for IPv6 extends IS-IS to support IPv6 addressing BGP+ extends BGP-4 to support Multiprotocol BGP (MBGP), including support for IPv6 addressing Multiprotocol Label Switching (MPLS) Layer 3 VPN allows Layer 3 VPNs across a provider network; uses MP-BGP to establish private routes for increased security; supports RFC 2547bis multiple autonomous system VPNs for added flexibility Multiprotocol Label Switching (MPLS) Layer 2 VPN establishes simple Layer 2 point-to-point VPNs across a provider network using only MPLS Label Distribution Protocol (LDP); requires no routing and therefore decreases complexity, increases performance, and allows VPNs of non-routable protocols; uses no routing information for increased security; supports Circuit Cross Connect (CCC), Static Virtual Circuits (SVCs), Martini draft, and Kompella-draft technologies Virtual Private LAN Service (VPLS) establishes point-to-multipoint Layer 2 VPNs across a provider network IPv6 tunneling provides an important element for the transition from IPv4 to IPv6; allows IPv6 packets to traverse IPv4-only networks by encapsulating the IPv6 packet into a standard IPv4 packet; supports manually configured, 6to4, Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) tunnels, and IPv6 on VPN to Provider Edge (6VPE) router tunnel Quality of Service (QoS) IEEE 802.1p prioritization delivers data to devices based on the priority and type of traffic Flexible classification creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, remark, and logging Bandwidth shaping Port-based rate limiting provides per-port ingress-/egress-enforced increased bandwidth Classifier-based rate limiting uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port Reduced bandwidth provides per-port, per-queue egress-based reduced bandwidth Broad QoS feature set provides support for Strict Priority Queuing (SP), Weighted Fair Queuing (WFQ), Weighted Deficit Round Robin(WDRR), SP+WDRR together, configurable buffers, Explicit Congestion Notification (ECN), and Weighted Random Early Detection (WRED) DA Worldwide Version 6 March 31, 2014 Page 4

5 Overview Traffic policing supports Committed Access Rate (CAR) and line rate Layer 3 services Address Resolution Protocol (ARP) determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network User Datagram Protocol (UDP) helper redirects UDP broadcasts to specific IP subnets to prevent server spoofing Dynamic Host Configuration Protocol (DHCP) simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation across subnets Management Management interface control enables or disables each of the following interfaces depending on security preferences: console port, telnet port, or reset button Industry-standard CLI with a hierarchical structure reduces training time and expenses, and increases productivity in multivendor installations SNMPv1, v2, and v3 provide complete support of SNMP; provide full support of industry-standard Management Information Base (MIB) plus private extensions; SNMPv3 supports increased security using encryption sflow (RFC 3176) provides scalable ASIC-based wirespeed network monitoring and accounting with no impact on network performance; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and realtime network monitoring purposes Remote monitoring (RMON) uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a private alarm extension group Debug and sampler utility supports ping and traceroute for both IPv4 and IPv6 Network Time Protocol (NTP) synchronizes timekeeping among distributed time servers and clients; keeps timekeeping consistent among all clock-dependent devices within the network so that the devices can provide diverse applications based on the consistent time Network Quality Analyzer (NQA) analyzes network performance and service quality by sending test packets, and provides network performance and service quality parameters such as jitter, TCP, or FTP connection delays and file transfer rates; allows a network manager to determine overall network performance and to diagnose and locate network congestion points or failures Information center provides a central information center for system and network information; aggregates all logs, traps, and debugging information generated by the system and maintains them in order of severity; outputs the network information to multiple channels based on user-defined rules IEEE 802.1AB Link Layer Discovery Protocol (LLDP) advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications Connectivity Jumbo frames DA Worldwide Version 6 March 31, 2014 Page 5

6 Overview Security allows high-performance backups and disaster-recovery systems with a maximum frame size of 9k bytes Loopback supports internal loopback testing for maintenance purposes and an increase in availability; loopback detection protects against incorrect cabling or network configurations and can be enabled on a per-port or per-vlan basis for added flexibility Ethernet operations, administration and maintenance (OAM) detects data link layer problems that occurred in the "last mile" using the IEEE 802.3ah OAM standard; monitors the status of the link between two devices Monitor link collects statistics on performance and errors on physical links, increasing system availability Packet storm protection protects against unknown broadcast, unknown multicast, or unicast storms with user-defined thresholds Flow control provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations Access control list (ACL) supports powerful ACLs for both IPv4 and IPv6; ACLs are used for filtering traffic to prevent unauthorized users from accessing the network, or for controlling network traffic to save resources; rules can either deny or permit traffic to be forwarded; rules can be based on a Layer 2 header or a Layer 3 protocol header; rules can be set to operate on specific dates or times Remote Authentication Dial-In User Service (RADIUS) eases switch security access administration by using a password authentication server Terminal Access Controller Access-Control System (TACACS+) delivers an authentication tool using TCP with encryption of the full authentication request, providing additional security Secure shell (SSHv2) uses external servers to securely log in to a remote device; with authentication and encryption, it protects against IP spoofing and plain-text password interception; increases the security of Secure FTP (SFTP) transfers DHCP snooping helps ensure that DHCP clients receive IP addresses from authorized DHCP servers and maintain a list of DHCP entries for trusted ports; prevents reception of fake IP addresses and reduces ARP attacks, improving security IP Source Guard filters packets on a per-port basis, which prevents illegal packets from being forwarded ARP attack protection protects against attacks that use a large number of ARP requests, using a host-specific, user-selectable threshold Port security allows access only to specified MAC addresses, which can be learned or specified by the administrator IEEE 802.1X support provides port-based user authentication with support for Extensible Authentication Protocol (EAP) MD5, TLS, TTLS, and PEAP with choice of AES, TKIP, and static or dynamic WEP encryption for protecting wireless traffic between authenticated clients and the access point Multiple user authentication methods IEEE 802.1X uses an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server to authenticate in accordance with industry standards Web-based authentication provides a browser-based environment, similar to IEEE 802.1X, to authenticate clients that do not support the IEEE 802.1X supplicant MAC-based authentication authenticates the client with the RADIUS server based on the client's MAC address DA Worldwide Version 6 March 31, 2014 Page 6

7 Overview Multicast support Integration Internet Group Management Protocol (IGMP) utilizes Any-Source Multicast (ASM) or Source-Specific Multicast (SSM) to manage IPv4 multicast networks; supports IGMPv1, v2, and v3 Protocol Independent Multicast (PIM) defines modes of Internet IPv4 and IPv6 multicasting to allow one-to-many and many-to-many transmission of information; PIM Dense Mode (DM), Sparse Mode (SM), and Source-Specific Mode (SSM) are supported Multicast Source Discovery Protocol (MSDP) allows multiple PIM-SM domains to interoperate; is used for inter-domain multicast applications Multicast Border Gateway Protocol (MBGP) allows multicast traffic to be forwarded across BGP networks separately from unicast traffic VPN 20Gbps Firewall Module provides enhanced stateful packet inspection and filtering; supports flexible security zones and virtual firewall containment; delivers advanced VPN services with 3DES and AES encryption at high performance and low latency; offers Web content filtering and application prioritization and optimization Warranty and support 1-year warranty advance hardware replacement with 10-calendar-day delivery (available in most countries) Electronic and telephone support limited electronic and business-hours telephone support is available from HP for the entire warranty period; to reach our support centers, refer to for details on the duration of support provided with your product purchase, refer to Software releases to find software for your product, refer to for details on the software releases available with your product purchase, refer to DA Worldwide Version 6 March 31, 2014 Page 7

8 Configuration Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack- Shippable solution. HP FF V Switch Chassis Must select min 1 Interface Module Must select min 4 Fabric Modules Must select min 1 Management Module Must select min 1 Power Supply 20U - Height JG608A Internal Power Supplies System (std 0 // max 6) User Selection (min 1 // max 6) per switch enclosure HP FF W AC Power Supply includes 1 x c19, 2500w NOTE: provides 5+1 Redundancy. Select an appropriate number of power supplies based on the maximum output power of your system and redundancy requirements. For component power consumption consult the install guide. PDU Cable NA/MEX/TW/JP " C19 PDU Jumper Cord (NA/MEX/TW/JP) PDU Cable ROW C19 PDU Jumper Cord (ROW) High Volt Switch to Wall Power Cord NEMA L6-20P Cord HP FF W DC Power Supply NEMA L6-20P Cord JG616A See Configuration Note:1, 2, 3 JG616A#B2B JG616A#B2C JG616A#B2E JG617A See Configuration Note:1, 6 Configuration Rules Note 1 Note 2 Note 3 Note 6 If more than 1 power supply is selected they, must all be the same Sku number. Localization required on orders without #B2B, #B2C or #B2E options. #B2E is Offered only in NA, Mexico, Taiwan and Japan. One of these cables is required when ordering this power supply: (Use #B01 if switch is CTO) - if applicable HP V 3m DC Power Supply Cable JG390A HP V 15m DC Power Supply Cable JG391A DA Worldwide Version 6 March 31, 2014 Page 8

9 Configuration Remarks: Drop down under power supply should offer the following options and results: Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO) Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO) High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America, Mexico, Taiwan, and Japan) Modules Interface Modules System (std 0 // max 8) User Selection (min 1 // max 8) per enclosure HP FF p 1/10GBASE-T SF Mod No Transceivers HP FF p 10GbE SFP+ SF Mod min=0 \ max=32 SFP+ Transceivers HP FF p 10GbE SFP+ SF Mod min=0 \ max=48 SFP+ Transceivers HP FF p 40GbE QSFP+ SF Mod min=0 \ max=4 QSFP+ Transceivers HP FF p 40GbE QSFP+ SF Mod min=0 \ max=8 QSFP+ Transceivers HP 10500/11900/ Gbps VPN FW Mod min=0 \ max=2 SFP Transceivers JG615A JG611A See Configuration Note:1, 2, 4 JG612A See Configuration Note:1, 2 JG613A See Configuration Note:3 JG614A See Configuration Note:3 JG372A See Configuration Note:5 Configuration Rules Note 1 The following Transceivers install into this Module: HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver JD109A JD110A JD111A JD112A JD113A DA Worldwide Version 6 March 31, 2014 Page 9

10 Configuration Note 2 Note 3 Note 4 Note 5 HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X120 1G SFP LC LH100 Transceiver HP X125 1G SFP LC LH nm Transceiver HP X120 1G SFP LC LH nm Transceiver HP X120 1G SFP RJ45 T Transceiver HP X120 1G SFP LC SX Transceiver HP X120 1G SFP LC LX Transceiver HP X125 1G SFP LC LH70 Transceiver HP X120 1G SFP LC BX 10-U Transceiver HP X120 1G SFP LC BX 10-D Transceiver The following Transceivers install into this Module: HP X130 10G SFP+ LC SR Transceiver HP X130 10G SFP+ LC LR Transceiver HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable HP X130 10G SFP+ LC ER 40km Transceiver The following 40G Transceivers install into this Module: HP X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver HP X140 40G QSFP+ MPO SR4 Transceiver HP X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver HP X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable HP X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable HP X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable HP X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable HP X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable The following Transceivers install into this Module: HP X130 10G SFP+ LC LRM Transceiver The following Transceivers install into this Module: HP X125 1G SFP LC LH nm Transceiver HP X120 1G SFP LC LH nm Transceiver HP X125 1G SFP LC LH70 Transceiver HP X120 1G SFP LC SX Transceiver HP X120 1G SFP LC LX Transceiver JD114A JD115A JD116A JD103A JD061A JD062A JD089B JD118B JD119B JD063B JD098B JD099B JD092B JD094B JD095C JD096C JD097C JG081C JC784C JG234A JG661A JG325B JG709A JG327A JG328A JG329A JG330A JG331A JD093B JD061A JD062A JD063B JD118B JD119B Fabric Modules DA Worldwide Version 6 March 31, 2014 Page 10

11 Configuration System (std 0 // max 4) User Selection (min 4 // max 4) per enclosure HP FF Tbps Type D Fabric Mod No supported Transceivers JG610A Management Modules System (std 0 // max 2) User Selection (min 1 // max 2) per enclosure HP FF Main Processing Unit JG609A Remarks: These modules can only be inserted into Slots 4 and 5. Transceivers SFP Transceivers HP X120 1G SFP RJ45 T Transceiver HP X120 1G SFP LC BX 10-U Transceiver HP X120 1G SFP LC BX 10-D Transceiver HP X120 1G SFP LC LH100 Transceiver HP X120 1G SFP LC LH nm XCVR HP X120 1G SFP LC SX Transceiver HP X120 1G SFP LC LX Transceiver HP X125 1G SFP LC LH nm XCVR HP X125 1G SFP LC LH70 Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver JD089B JD098B JD099B JD103A JD062A JD118B JD119B JD061A JD063B JD109A JD110A JD111A JD112A JD113A JD114A JD115A JD116A SFP+ Transceivers HP X130 10G SFP+ LC SR Transceiver HP X130 10G SFP+ LC LRM Transceiver HP X130 10G SFP+ LC LR Transceiver HP X130 10G SFP+ LC ER 40km Transceiver HP X240 10G SFP+ SFP+ 0.65m DAC Cable HP X240 10G SFP+ SFP+ 1.2m DAC Cable HP X240 10G SFP+ SFP+ 3m DAC Cable HP X240 10G SFP+ SFP+ 5m DAC Cable JD092B JD093B JD094B JG234A JD095C JD096C JD097C JG081C DA Worldwide Version 6 March 31, 2014 Page 11

12 Configuration HP X240 10G SFP+ 7m DAC Cable JC784C QSFP+ Transceivers HP X140 40G QSFP+ LC LR4 SM XCVR HP X140 40G QSFP+ MPO SR4 XCVR HP X140 40G QSFP+ CSR4 300m XCVR HP X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable HP X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable HP X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable HP X240 QSFP+ 4x10G SFP+ 1m Direct Attach Copper Cable HP X240 QSFP+ 4x10G SFP+ 3m Direct Attach Copper Cable HP X240 QSFP+ 4x10G SFP+ 5m Direct Attach Copper Cable JG661A JG325B JG709A JG326A JG327A JG328A JG329A JG330A JG331A Switch Enclosure Options Mounting Kit HP X421 Chassis Universal Rck Mntg Kit JC665A See Configuration Note:1 Configuration Rules Note 1 Remarks: If any switch is installed into a rack, Then this Rack Mounting kit is required. Default a quantity of 1 when Switch is selected. Fans HP FF V Spare Fan Assy JG618A Power Supply Cables (std 0 // max 1) User Selection (min 1 // max 1) per DC Power Supply HP V 3m DC Power Supply Cable HP V 15m DC Power Supply Cable JG390A JG391A DA Worldwide Version 6 March 31, 2014 Page 12

13 Technical Specifications HP FlexFabric V Switch Chassis (JG608A) I/O ports and slots 8 I/O module slots Supports a maximum of 384 1/10GbE ports or 192 1/10GBASE-T ports or 64 40GbE ports, or a combination Additional ports and slots 2 MPU (for management modules) slots 4 switch fabric slots Power supplies Fan tray 6 power supply slots 1 minimum power supply required (ordered separately) includes: 1 x JC634A 1 fan tray slot Physical characteristics Dimensions 17.32(w) x 25.98(d) x 34.88(h) in (43.99 x x 88.6 (20U height) Weight Full configuration weight lb (76.9 kg) chassis lb ( kg) Memory and processor Management module Dual Core 1.2 GHz, 512 MB flash, 8 GB DDR2 SDRAM Mounting Mounts in an EIA-standard 19 in. rack or other equipment cabinet (hardware included); horizontal surface mounting only Performance Throughput up to 5.8 Bpps (64-byte packets Switching capacity Routing table size MAC address table size 7.7 Tb/s entries (IPv4), 8192 entries (IPv6) entries Reliability Availability % Environment Operating temperature 32 F to 113 F (0 C to 45 C) Operating relative humidity Nonoperating/Storage temperature Nonoperating/Storage relative humidity Altitude Acoustic 10% to 95%, noncondensing -40 F to 158 F (-40 C to 70 C) 5% to 95%, noncondensing up to 13,123 ft (4 km) Electrical characteristics AC Voltage / VAC Safety Current Power output Frequency Notes Low-speed fan: 61.6 db, High-speed fan: 72.6 db 16/60 A 2500 W 50/60 Hz Based on a common power supply of 2,500 W (AC) CAN/CSA 22.2 No ; FCC Part 15, Subpart B; FDA 21 CFR Subchapter J; ROHS Compliance; IEC :Second Edition ; EN : A11:2009; AS/NZS ; IEC ; UL , 2nd Edition; EN :2004+A1:2007 Emissions VCCI Class A; EN Class A; CISPR 22 Class A; IEC/EN ; IEC/EN ; ICES-003 Class A; AS/NZS CISPR 22 Class A; FCC (CFR 47, Part 15) Class A; GB9254 Immunity Generic Directive 2004/108/EC DA Worldwide Version 6 March 31, 2014 Page 13

14 Technical Specifications Management Standards and protocols (applies to all products in series) EN ESD EN Radiated EN EFT/Burst EN Surge EN Conducted EN Power frequency magnetic field Voltage dips and interruptions EN 55024:1998+ A1: A2:2003; ETSI EN V1.3.3 IEC EN Harmonics EN , IEC Flicker EN , IEC IMC - Intelligent Management Center; command-line interface; out-of-band management (serial RS-232C); SNMP Manager; Telnet; terminal interface (serial RS-232C); modem interface; IEEE Ethernet MIB; Ethernet Interface MIB Refer to the HP website at: for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office. BGP RFC 1771 BGPv4 RFC 1772 Application of the BGP RFC 1997 BGP Communities Attribute RFC 1998 PPP Gandalf FZA Compression Protocol RFC 2385 BGP Session Protection via TCP MD5 RFC 2439 BGP Route Flap Damping RFC 2796 BGP Route Reflection RFC 2858 BGP-4 Multi-Protocol Extensions RFC 2918 Route Refresh Capability RFC 3065 Autonomous System Confederations for BGP RFC 3392 Capabilities Advertisement with BGP-4 RFC 4271 A Border Gateway Protocol 4 (BGP-4) RFC 4272 BGP Security Vulnerabilities Analysis RFC 4273 Definitions of Managed Objects for BGP-4 RFC 4274 BGP-4 Protocol Analysis RFC 4275 BGP-4 MIB Implementation Survey RFC 4276 BGP-4 Implementation Report RFC 4277 Experience with the BGP-4 Protocol RFC 4360 BGP Extended Communities Attribute RFC 4456 BGP Route Reflection: An Alternative to Full Mesh Internal BGP (IBGP) RFC 5291 Outbound Route Filtering Capability for BGP-4 RFC 5292 Address-Prefix-Based Outbound Route Filter for BGP-4 Denial of service protection RFC 3315 DHCPv6 (client and relay) RFC 3484 Default Address Selection for IPv6 RFC 3513 IPv6 Addressing Architecture RFC 3736 Stateless Dynamic Host Configuration Protocol (DHCP) Service for IPv6 RFC 3810 MLDv2 for IPv6 RFC 4214 Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) RFC 4861 IPv6 Neighbor Discovery RFC 4862 IPv6 Stateless Address Auto-configuration MIBs RFC 1156 (TCP/IP MIB) RFC 1157 A Simple Network Management Protocol (SNMP) RFC 1215 A Convention for Defining Traps for use with the SNMP RFC 1229 Interface MIB Extensions RFC 1493 Bridge MIB RFC 1573 SNMP MIB II RFC 1643 Ethernet MIB RFC 1657 BGP-4 MIB RFC 1724 RIPv2 MIB RFC 1907 SNMPv2 MIB RFC 2011 SNMPv2 MIB for IP RFC 2012 SNMPv2 MIB for TCP RFC 2013 SNMPv2 MIB for UDP RFC 2096 IP Forwarding Table MIB RFC 2233 Interface MIB DA Worldwide Version 6 March 31, 2014 Page 14

15 Technical Specifications Automatic filtering of well-known denial-of-service packets CPU DoS Protection Rate Limiting by ACLs Device management RFC 1157 SNMPv1/v2c RFC 1305 NTPv3 RFC 1902 (SNMPv2) RFC 2579 (SMIv2 Text Conventions) RFC 2580 (SMIv2 Conformance) RFC 2819 (RMON groups Alarm, Event, History and Statistics only) HTTP, SSHv1, and Telnet Multiple Configuration Files Multiple Software Images SSHv1/SSHv2 Secure Shell TACACS/TACACS+ Web UI General protocols IEEE 802.1ad Q-in-Q IEEE 802.1ag Service Layer OAM IEEE 802.1p Priority IEEE 802.1Q VLANs IEEE 802.1s Multiple Spanning Trees IEEE 802.1w Rapid Reconfiguration of Spanning Tree IEEE 802.1X PAE IEEE 802.3ab 1000BASE-T IEEE 802.3ac (VLAN Tagging Extension) IEEE 802.3ad Link Aggregation Control Protocol (LACP) IEEE 802.3ae 10-Gigabit Ethernet IEEE 802.3ah Ethernet in First Mile over Point to Point Fiber - EFMF IEEE 802.3ba 40 and 100 Gigabit Ethernet Architecture IEEE 802.3x Flow Control IEEE 802.3z 1000BASE-X RFC 768 UDP RFC 783 TFTP Protocol (revision 2) RFC 791 IP RFC 792 ICMP RFC 793 TCP RFC 826 ARP RFC 854 TELNET RFC 894 IP over Ethernet RFC 925 Multi-LAN Address Resolution RFC 950 Internet Standard Subnetting Procedure RFC 959 File Transfer Protocol (FTP) RFC 1027 Proxy ARP RFC 2452 IPV6-TCP-MIB RFC 2454 IPV6-UDP-MIB RFC 2465 IPv6 MIB RFC 2466 ICMPv6 MIB RFC 2571 SNMP Framework MIB RFC 2572 SNMP-MPD MIB RFC 2573 SNMP-Target MIB RFC 2578 Structure of Management Information Version 2 (SMIv2) RFC 2580 Conformance Statements for SMIv2 RFC 2618 RADIUS Client MIB RFC 2620 RADIUS Accounting MIB RFC 2665 Ethernet-Like-MIB RFC MAU MIB RFC p and IEEE 802.1Q Bridge MIB RFC 2787 VRRP MIB RFC 2819 RMON MIB RFC 2925 Ping MIB RFC 2932IP (Multicast Routing MIB) RFC 2933 IGMP MIB RFC 2934 Protocol Independent Multicast MIB for IPv4 RFC 3414 SNMP-User based-sm MIB RFC 3415 SNMP-View based-acm MIB RFC 3417 Simple Network Management Protocol (SNMP) over IEEE 802 Networks RFC 3418 MIB for SNMPv3 RFC 3595 Textual Conventions for IPv6 Flow Label RFC 3621 Power Ethernet MIB RFC 3813 MPLS LSR MIB RFC 3814 MPLS FTN MIB RFC 3815 MPLS LDP MIB RFC 3826 AES for SNMP's USM MIB RFC 4133 Entity MIB (Version 3) RFC 4444 Management Information Base for Intermediate System to Intermediate System (IS-IS) MPLS RFC 2205 Resource ReSerVation Protocol RFC 2209 Resource ReSerVation Protocol (RSVP) RFC 2702 Requirements for Traffic Engineering Over MPLS RFC 2858 Multiprotocol Extensions for BGP-4 RFC 2961 RSVP Refresh Overhead Reduction Extensions RFC 3031 Multiprotocol Label Switching Architecture RFC 3032 MPLS Label Stack Encoding RFC 3107 Carrying Label Information in BGP-4 RFC 3212 Constraint-Based LSP Setup using LDP RFC 3479 Fault Tolerance for the Label Distribution DA Worldwide Version 6 March 31, 2014 Page 15

16 Technical Specifications RFC 1035 Domain Implementation and Specification RFC 1042 IP Datagrams RFC 1058 RIPv1 RFC 1142 OSI IS-IS Intra-domain Routing Protocol RFC 1195 OSI ISIS for IP and Dual Environments RFC 1213 Management Information Base for Network Management of TCP/IP-based internets RFC 1293 Inverse Address Resolution Protocol RFC 1305 NTPv3 RFC 1350 TFTP Protocol (revision 2) RFC 1393 Traceroute Using an IP Option RFC 1519 CIDR RFC 1531 Dynamic Host Configuration Protocol RFC 1533 DHCP Options and BOOTP Vendor Extensions RFC 1591 DNS (client only) RFC 1624 Incremental Internet Checksum RFC 1701 Generic Routing Encapsulation RFC 1721 RIP-2 Analysis RFC 1723 RIP v2 RFC 1812 IPv4 Routing RFC 2082 RIP-2 MD5 Authentication RFC 2091 Trigger RIP RFC 2131 DHCP RFC 2138 Remote Authentication Dial In User Service (RADIUS) RFC 2236 IGMP Snooping RFC 2338 VRRP RFC 2453 RIPv2 RFC 2644 Directed Broadcast Control RFC 2763 Dynamic Name-to-System ID mapping support RFC 2784 Generic Routing Encapsulation (GRE) RFC 2865 Remote Authentication Dial In User Service (RADIUS) RFC 2966 Domain-wide Prefix Distribution with Two-Level IS-IS RFC 2973 IS-IS Mesh Groups RFC 3022 Traditional IP Network Address Translator (Traditional NAT) RFC 3277 IS-IS Transient Blackhole Avoidance RFC 3567 Intermediate System to Intermediate System (IS-IS) Cryptographic Authentication RFC 3719 Recommendations for Interoperable Networks using Intermediate System to Intermediate System (IS-IS) RFC 3784 ISIS TE support RFC 3786 Extending the Number of IS-IS LSP Fragments Beyond the 256 Limit Protocol (LDP) RFC 3487 Graceful Restart Mechanism for LDP RFC 3564 Requirements for Support of Differentiated Service-aware MPLS Traffic Engineering RFC 4364 BGP/MPLS IP Virtual Private Networks (VPNs) RFC 4379 Detecting Multi-Protocol Label Switched (MPLS) Data Plane Failures RFC 4447 Pseudowire Setup and Maintenance Using LDP RFC 4448 Encapsulation Methods for Transport of Ethernet over MPLS Networks RFC 4664 Framework for Layer 2 Virtual Private Networks RFC 4665 Service Requirements for Layer 2 Provider Provisioned Virtual Private Networks RFC 4761 Virtual Private LAN Service (VPLS) Using BGP for Auto-Discovery and Signaling RFC 4762 Virtual Private LAN Service (VPLS) Using Label Distribution Protocol (LDP) Signaling RFC 5036 LDP Specification Network management IEEE 802.1AB Link Layer Discovery Protocol (LLDP) RFC 1155 Structure of Management Information RFC 1157 SNMPv1 RFC 1448 Protocol Operations for version 2 of the Simple Network Management Protocol (SNMPv2) RFC 2211 Controlled-Load Network RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events) RFC 3176 sflow RFC 3411 SNMP Management Frameworks RFC 3412 SNMPv3 Message Processing RFC 3414 SNMPv3 User-based Security Model (USM) RFC 3415 SNMPv3 View-based Access Control Model VACM) ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED) OSPF RFC 1245 OSPF protocol analysis RFC 1246 Experience with OSPF RFC 1765 OSPF Database Overflow RFC 1850 OSPFv2 Management Information Base (MIB), traps RFC 2154 OSPF w/ Digital Signatures (Password, MD-5) RFC 2328 OSPFv2 DA Worldwide Version 6 March 31, 2014 Page 16

17 Technical Specifications RFC 3787 Recommendations for Interoperable IP Networks using Intermediate System to Intermediate System (IS-IS) RFC 3847 Restart signaling for IS-IS RFC 4251 The Secure Shell (SSH) Protocol Architecture RFC 4486 Subcodes for BGP Cease Notification Message RFC 4884 Extended ICMP to Support Multi-Part Messages RFC 4941 Privacy Extensions for Stateless Address Autoconfiguration in IPv6 RFC 5130 A Policy Control Mechanism in IS-IS Using Administrative Tags IP multicast RFC 2236 IGMPv2 RFC 2283 Multiprotocol Extensions for BGP-4 RFC 2362 PIM Sparse Mode RFC 3376 IGMPv3 RFC 3446 Anycast Rendezvous Point (RP) mechanism using Protocol Independent Multicast (PIM) and Multicast Source Discovery Protocol (MSDP) RFC 3618 Multicast Source Discovery Protocol (MSDP) RFC 3973 PIM Dense Mode RFC 4541 Considerations for Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Snooping Switches RFC 4601 PIM Sparse Mode RFC 4604 Using Internet Group Management Protocol Version 3 (IGMPv3) and Multicast Listener Discovery Protocol Version 2 (MLDv2) for Source-Specific Multicast RFC 4605 IGMP/MLD Proxying RFC 4607 Source-Specific Multicast for IP RFC 5059 Bootstrap Router (BSR) Mechanism for Protocol Independent Multicast (PIM) IPv6 RFC 1886 DNS Extension for IPv6 RFC 1887 IPv6 Unicast Address Allocation Architecture RFC 1981 IPv6 Path MTU Discovery RFC 2080 RIPng for IPv6 RFC 2081 RIPng Protocol Applicability Statement RFC 2292 Advanced Sockets API for IPv6 RFC 2373 IPv6 Addressing Architecture RFC 2375 IPv6 Multicast Address Assignments RFC 2370 OSPF Opaque LSA Option RFC 3101 OSPF NSSA RFC 3137 OSPF Stub Router Advertisement RFC 3623 Graceful OSPF Restart RFC 3630 Traffic Engineering Extensions to OSPFv2 RFC 4061 Benchmarking Basic OSPF Single Router Control Plane Convergence RFC 4062 OSPF Benchmarking Terminology and Concepts RFC 4063 Considerations When Using Basic OSPF Convergence Benchmarks RFC 4222 Prioritized Treatment of Specific OSPF Version 2 Packets and Congestion Avoidance RFC 4577 OSPF as the Provider/Customer Edge Protocol for BGP/MPLS IP Virtual Private Networks (VPNs) RFC 4811 OSPF Out-of-Band LSDB Resynchronization RFC 4812 OSPF Restart Signaling RFC 4813 OSPF Link-Local Signaling RFC 4940 IANA Considerations for OSPF QoS/CoS IEEE 802.1P (CoS) RFC 1349 Type of Service in the Internet Protocol Suite RFC 2211 Specification of the Controlled-Load Network Element Service RFC 2212 Guaranteed Quality of Service RFC 2474 DSCP DiffServ RFC 2475 DiffServ Architecture RFC 2597 DiffServ Assured Forwarding (AF) RFC 2598 DiffServ Expedited Forwarding (EF) Security IEEE 802.1X Port Based Network Access Control RFC 1321 The MD5 Message-Digest Algorithm RFC 1334 PPP Authentication Protocols (PAP) RFC 1492 TACACS+ RFC 1994 PPP Challenge Handshake Authentication Protocol (CHAP) RFC 2082 RIP-2 MD5 Authentication RFC 2104 Keyed-Hashing for Message Authentication RFC 2408 Internet Security Association and Key Management Protocol (ISAKMP) RFC 2409 The Internet Key Exchange (IKE) RFC 2716 PPP EAP TLS Authentication Protocol RFC 2865 RADIUS Authentication DA Worldwide Version 6 March 31, 2014 Page 17

18 Technical Specifications RFC 2460 IPv6 Specification RFC 2461 IPv6 Neighbor Discovery RFC 2462 IPv6 Stateless Address Auto-configuration RFC 2463 ICMPv6 RFC 2464 Transmission of IPv6 over Ethernet Networks RFC 2473 Generic Packet Tunneling in IPv6 RFC 2526 Reserved IPv6 Subnet Anycast Addresses RFC 2529 Transmission of IPv6 Packets over IPv4 RFC 2545 Use of MP-BGP-4 for IPv6 RFC 2553 Basic Socket Interface Extensions for IPv6 RFC 2710 Multicast Listener Discovery (MLD) for IPv6 RFC 2740 OSPFv3 for IPv6 RFC 2767 Dual stacks IPv46 & IPv6 RFC 2893 Transition Mechanisms for IPv6 Hosts and Routers RFC 3056 Connection of IPv6 Domains via IPv4 Clouds RFC 3307 IPv6 Multicast Address Allocation RFC 2866 RADIUS Accounting RFC 2868 RADIUS Attributes for Tunnel Protocol Support RFC 2869 RADIUS Extensions Access Control Lists (ACLs) Guest VLAN for 802.1x MAC Authentication Port Security SSHv1/SSHv2 Secure Shell VPN RFC HMAC-MD5-96 RFC HMAC-SHA1-96 RFC DES-CBC Cipher algorithm RFC Domain of interpretation RFC 2547 BGP/MPLS VPNs RFC 2917 A Core MPLS IP VPN Architecture RFC IP Authentication Header (AH) RFC IP Encapsulating Security Payload (ESP) DA Worldwide Version 6 March 31, 2014 Page 18

19 Accessories accessories Modules HP FlexFabric port 10GbE SFP+ SF Module HP FlexFabric port 10GbE SFP+ SF Module HP FlexFabric Main Processing Unit NEW HP FlexFabric port 1/10GBASE-T SF Module HP FlexFabric port 40GbE QSFP+ SF Module HP FlexFabric port 40GbE QSFP+ SF Module Transceivers HP X120 1G SFP RJ45 T Transceiver HP X120 1G SFP LC SX Transceiver HP X120 1G SFP LC LX Transceiver HP X125 1G SFP LC LH nm Transceiver HP X120 1G SFP LC LH nm Transceiver HP X125 1G SFP LC LH70 Transceiver HP X120 1G SFP LC LH100 Transceiver HP X120 1G SFP LC BX 10-D Transceiver HP X120 1G SFP LC BX 10-U Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X170 1G SFP LC LH Transceiver HP X130 10G SFP+ LC SR Transceiver HP X130 10G SFP+ LC LRM Transceiver HP X130 10G SFP+ LC LR Transceiver HP X130 10G SFP+ LC ER 40km Transceiver HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable HP X140 40G QSFP+ MPO SR4 Transceiver HP X240 40G QSFP+ to QSFP+ 1m Direct Attach Copper Cable HP X240 40G QSFP+ to QSFP+ 3m Direct Attach Copper Cable HP X240 40G QSFP+ to QSFP+ 5m Direct Attach Copper Cable HP X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable HP X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable HP X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable HP X140 40G QSFP+ MPO SR4 Transceiver JG612A JG611A JG609A JG615A JG613A JG614A JD089B JD118B JD119B JD061A JD062A JD063B JD103A JD099B JD098B JD113A JD114A JD115A JD116A JD109A JD110A JD111A JD112A JD092B JD093B JD094B JG234A JD095C JD096C JD097C JG081C JC784C JG325A JG326A JG327A JG328A JG329A JG330A JG331A JG325B DA Worldwide Version 6 March 31, 2014 Page 19

20 Accessories NEW HP X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver Power Supply HP FlexFabric W AC Power Supply HP FlexFabric W DC Power Supply Mounting Kit HP X421 Chassis Universal 4-post Rack Mounting Kit Power cords HP V 3m DC Power Supply Cable HP V 15m DC Power Supply Cable HP FlexFabric V Switch Chassis (JG608A) HP FlexFabric Tbps Type D Fabric Module HP FlexFabric V Spare Fan Assembly JG709A JG616A JG617A JC665A JG390A JG391A JG610A JG618A DA Worldwide Version 6 March 31, 2014 Page 20

21 Accessory Product Details NOTE: Details are not available for all accessories. The following specifications were available at the time of publication. Modules HP FlexFabric Main Processing Unit (JG609A)Physical characteristics Dimensions 15.71(w) x 13.86(d) x 1.57(h) in (39.9 x 35.2 x 3.99 Weight 6.55 lb (2.97 kg) HP FlexFabric port 10GbE SFP+ SF Module (JG611A) Ports 32 SFP+ 1/10GbE ports Physical characteristics Dimensions 15.71(w) x 13.86(d) x 1.57(h) in (39.9 x 35.2 x 3.99 Weight 7.61 lb (3.45 kg) HP FlexFabric port 10GbE SFP+ SF Module (JG612A) Ports 48 SFP+ 1/10GbE ports Physical characteristics Dimensions 15.71(w) x 13.86(d) x 1.57(h) in (39.9 x 35.2 x 3.99 Weight 9.1 lb (4.13 kg) HP FlexFabric port 40GbE QSFP+ SF Module (JG613A) Ports 4 QSFP+ 40-GbE ports Physical characteristics Dimensions 15.71(w) x 13.86(d) x 1.57(h) in (39.9 x 35.2 x 3.99 Weight 6.92 lb (3.14 kg) DA Worldwide Version 6 March 31, 2014 Page 21

22 Accessory Product Details HP FlexFabric port 40GbE QSFP+ SF Module (JG614A) Ports 8 QSFP+ 40-GbE ports Physical characteristics Dimensions 15.71(w) x 13.86(d) x 1.57(h) in (39.9 x 35.2 x 3.99 Weight 7.43 lb (3.37 kg) Transceivers HP X125 1G SFP LC LH nm Transceiver (JD061A) A small form-factor pluggable SFP Gigabit LH40 transceiver that provides a full duplex Gigabit solution up to 40km on a singlemode fiber. Ports 1 LC 1000Base-LH port (no IEEE standard exists for 1550 nm optics) Connectivity Connector type LC Wavelength 1310 nm Physical characteristics Dimensions 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 Full configuration weight 0.04 lb. (0.02 kg) Electrical characteristics typical 0.8 W 1.0 W maximum Cabling Cable type: Single-mode fiber optic, complying with ITU-T G.652; Maximum distance: 40km distance Fiber type Single Mode HP X120 1G SFP LC LH nm Transceiver (JD062A) A small form-factor pluggable (SFP) Gigabit LH40 transceiver that provides a full-duplex Gigabit solution up to 40 km on a single mode fiber. Ports 1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics) Connectivity Connector type LC Wavelength 1550 nm Physical characteristics Dimensions 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 Full configuration weight 0.04 lb. (0.02 kg) Electrical characteristics typical 0.8 W 1.0 W maximum Cabling Cable type: Single-mode fiber optic, complying with ITU-T G.652; Maximum distance: 40km distance Fiber type Single Mode DA Worldwide Version 6 March 31, 2014 Page 22

23 Accessory Product Details HP X125 1G SFP LC LH70 Transceiver (JD063B) A small form-factor pluggable (SFP) Gigabit LH70 transceiver that provides a full-duplex Gigabit solution up to 70km on a single-mode fiber. Ports 1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics) Connectivity Connector type LC Wavelength 1550 nm Physical characteristics Dimensions 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 Electrical characteristics Cabling Full configuration weight typical maximum 0.04 lb. (0.02 kg) 0.8 W 1.0 W Cable type: Single-mode fiber optic, complying with ITU-T G.652; Maximum distance: 70km Fiber type Single Mode HP X125 1G SFP RJ45 T Transceiver (JD089B) A small form factor pluggable (SFP) Gigabit 1000Base-T transceiver that provides a full duplex Gigabit solution up to 100m on a Cat-5+ cable. Ports 1 RJ BASE-T port (IEEE 802.3ab Type 1000BASE-T) Connectivity Connector type RJ-45 Physical characteristics Dimensions 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 Electrical characteristics Cabling Full configuration weight typical maximum 0.07 lb. (0.03 kg) 0.8 W 1.0 W Cable type: 1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4- pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T; Maximum distance: 100m DA Worldwide Version 6 March 31, 2014 Page 23

24 Accessory Product Details HP X120 1G SFP LC BX 10- U Transceiver (JD098B) A small form-factor pluggable (SFP) Gigabit LX- BX10-U transceiver that provides a full duplex Gigabit solution up to 10km on a single mode cable. Ports 1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U); Duplex: full only Connectivity Connector type LC Physical characteristics Dimensions 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 Electrical characteristics Cabling Notes Full configuration weight typical maximum Maximum distance: 10km Fiber type TX 1310nm RX 1490nm 0.04 lb. (0.02 kg) 0.8 W 1.0 W Single Mode HP X120 1G SFP LC BX 10- D Transceiver (JD099B) A small form-factor pluggable (SFP) Gigabit LX- BX10-D transceiver that provides a full duplex Gigabit solution up to 10km on a single mode cable. Ports 1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D); Duplex: full only Connectivity Connector type LC Physical characteristics Dimensions 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 Electrical characteristics Cabling Notes Full configuration weight typical maximum Maximum distance: Up to 10km Fiber type TX 1490nm RX 1310nm 0.04 lb. (0.02 kg) 0.8 W 1.0 W Single Mode DA Worldwide Version 6 March 31, 2014 Page 24