NATILUS. Smallcut Plate System. NATİLUS SMALLCUT PLATE SYSTEM Smallcut Locking Plate Smallcut Dynamic Plate. Features. Indications.

Transcription

1 NATILUS Smallcut Plate System Retractor Canal Radial Fit Low Contact Locking Options Dynamic Options Dynamic Compression NATİLUS SMALLCUT PLATE SYSTEM Smallcut Locking Plate Smallcut Dynamic Plate Natilus Smallcut plate system is a minimal invasive system. Additionally Natilus Smallcut Plate System is more stable than traditional plate systems. In traditional plate systems the loading is perpendicular to the screws, but in Natilus Smallcut System the loading is less ten 90 degrees. That means less bending force at screws and the plate. So early load bearing is available in Natilus Smallcut Plate system Features Small incision is needed for application More stable than traditional plates MRI compatibility Less bending force on the plate Canals in the ends for skin retractor Radial anatomic fit Site canal - low contact surface combination Site canals for multipurpose use Unique plate tips for easy application Dynamic compression ability Locking screw application in locking plates Dynamic loading in dynamic plates Unique screw tip for self drilling and tapping Percutenous screw application Indications Stabilization of long bones; Femur, tibia, humerus, radius, ulna... Contraindications İnfection Severe osteoporotic bone Metal sensitivity Smallcut Incision Psychiatric conditions that patient can not cooperate. Smallcut means small incision for the application

2 Specifications to to to Natilus Smallcut Dynamic Plate 3mm (Stainless Steel) Natilus Smallcut Dynamic Plate 4mm (Stainless Steel) Natilus Smallcut Dynamic Plate 5mm (Stainless Steel) to to to Natilus Smallcut Locking Plate 3mm (Stainless Steel) Natilus Smallcut Locking Plate 4mm (Stainless Steel) Natilus Smallcut Locking Plate 5mm (Stainless Steel) to to to Natilus Normalcut Locking Plate 3mm (Stainless Steel) Natilus Normalcut Locking Plate 4mm (Stainless Steel) Natilus Normalcut Locking Plate 5mm (Stainless Steel) to to to Natilus Normalcut Dynamic Plate 3mm (Stainless Steel) Natilus Normalcut Dynamic Plate 4mm (Stainless Steel) Natilus Normalcut Dynamic Plate 5mm (Stainless Steel) to to to to to to to to to to to to to to to to VS Metric Screw Ø5mm x 20mm to 70mm (SS) VS Metric Locking Screw Ø5mm x 20mm to 70mm (SS) VS Cortical Screw Ø5mm x 20mm to 70mm (SS) VS Cortical Locking Screw Ø5mm x 20mm to 70mm (SS) VS Metrik Screw Ø4.5mm x 16mm to 70mm (SS) VS Metric Locking Screw Ø4.5mm x 16mm to 70mm (SS) VS Cortical Screw Ø4.5mm x 16mm to 70mm (SS) VS Cortical Locking Screw Ø4.5mm x 16mm to 70mm (SS) VS Metrik Screw Ø3.5mm x 10mm to 50mm (SS) VS Metric Locking Screw Ø3.5mm x 10mm to 50mm (SS) VS Cortical Screw Ø3.5mm x 10mm to 50mm (SS) VS Cortical Locking Screw Ø3.5mm x 10mm to 50mm (SS) VS Metrik Screw Ø2.7mm x 10mm to 40mm (SS) VS Metric Locking Screw Ø2.7mm x 10mm to 40mm (SS) VS Cortical Screw Ø2.7mm x 10mm to 40mm (SS) VS Cortical Locking Screw Ø2.7mm x 10mm to 40mm (SS) Headquarters: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, Bahcelievler / Istanbul E- mail: info@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 14, Esenler / Istanbul research@spinamer.com Factory: Sanayi Mah Sok. No: Esenyurt / Istanbul Tel: Fax: factory@spinamer.com Supported by kosgeb R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş

3 OrtoVia External Fixator System Practically Stable Modularity Smart 3D joint Joint Cancelling Easy Pin Holding Multiaxis Pin Insertion Unique Pin Tip ORTOVIA 3D Lower Extremity Fixator System ORTOVIA 3D Fixator System is a series of modular monolateral external fixator that was developed under many years of clinical experience. Features Modularity Easy application Short surgery time MRI compatability Flexibility - Versatility Stability & safety in corrections Patient s comfort Radiolucent components Short learning curve Fixator Modules: Adult Fixator: Clamp : Metaphysis Clamp, Poly Clamp, Sliding Clamp, Half Sliding Clamp. Joint : 3D Joint, BS Joint Body : L20, L25, L30 Pediatric Fixator: Clamp : Pediatric Metafiz Clamp, Pediatric Sliding Clamp Joint : Pediatric 3D, Pediatric BS Joint Distractor : P15, P20, P25 Indications Short Stature Bone loss Open fractures Comminuted fractures Non-union Angular deformities Limb reconstruction

4 Specifications ORTOVIA FIXATOR VIAFIX FIXATOR ORTOVIA Fixator Body L20 ORTOVIA Fixator Body L25 ORTOVIA Fixator Body L30 ORTOVIA Slindig Clamp ORTOVIA Half Slindig Clamp ORTOVIA Methaphisis Clamp ORTOVIA LS2O ORTOVIA L20 ORTOVIA L25 ORTOVIA L30 ORTOVIA LS ORTOVIA R20 ORTOVIA R25 ORTOVIA R30 ORTOVIA RS VIAFIX Fixator Short Body VIAFIX Fixator Medium Body VIAFIX Fixator Long Body VIAFIX Sliding Clamp VIAFIX Poly Clamp VIAFIX Mono Clamp VIAFIX Fixator Rod 150mm VIAFIX Fixator Rod 200mm VIAFIX Fixator Rod 250mm VIAFIX Fixator Rod 300mm VIAFIX Fixator Ball-Socket Joint VIAFIX Fıxator Hinge-Joint VIAFIX Fixator Connector-joint VIAFIX D Fixator Short VIAFIX D Fixator Medium VIAFIX D Fixator Long VIAFIX DT Fixator VIAFIX D Hip Clamp Headquarters: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, Bahcelievler / Istanbul E- mail: info@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 14, Esenler / Istanbul research@spinamer.com Factory: Sanayi Mah Sok. No: Esenyurt / Istanbul Tel: Fax: factory@spinamer.com Supported by kosgeb R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş

5 ANT SCREW ANT SCREW SYSTEMS Multifunction Screws Dual Threads Augmentation Hole Anchor Use Cannulated Options Percutaneous Options Unique Tip ANT SCREW SYSTEMS Canulated screw Percutenous solid screws FEATURES: Designed to stabilize bone fragments. Threaded head provides interfragmentary compression. Threaded conical head design minimizes hardware prominence and soft tissue irritation. Ability of soft tissue augmentation by the hole on the head. Ability of wire augmentation via the hole on the head to fix the fragments. Self driling and tapping ability. INDICATIONS: Alignment and stabilization of bone fractures; such as wrist,elbow,foot,ankle,k nee,patella,hip,etc. Nonunions and malunions Ligament reconstruction. Arthrodesis of the foot,ankle,wrist,elbow and hand. Agumentation of fracture fixation by wire or cable via the hole on the head CONTRAINDICATIONS: Active infection Patient conditions including blood supply limitations, Insufficient quantity or of bone Patients with mental or neurologic conditions who are unwilling or incapaple of following postoperative care instructions. Foreign body sensitivity.

6 Specifications SCREW SIZES: Shaft / thread : lenght 1.6 / 2.5mm: mm in 2mm increment in lenght. 2.0 / 3.0mm: mm in 2mm increment in lenght. 2.5 / 3.5mm: mm in lenght with 2 mm increment and 50-70mm with 5mm increment. 3.5 / 4.5mm: mm in lenght, 20-50mm with 2mm and mm with 5mm increment. 4.5 / 6.5mm: mm in lenght, 16-30mm with 2mm increment and mm with 5mm. Both canulated and uncanulated screws are avalable. Presented as microant and ANT Screw set: microant Screw set: 1.6 / 2.5mm screws 2.0 / 3.0mm screws 2.5 / 3.5mm screws Both canulated and solid ANT Screw set : 3.5 /4.5mm screws 4.5/6.5mm screws Both canulated and solid ANT Screws and microant Screws to to to to to to ORTOVIA Ant Solid Screw 20mm to 100mm Ø4.5mm (Ti) ORTOVIA Ant Cannulated Screw 20mm to 100mm Ø4.5mm (Ti) ORTOVIA Ant Solid Screw 20mm to 120mm 25mm Thread Ø6.5mm (Ti) ORTOVIA Ant Cannulated Screw 20mm to 120mm 25mm Thread Ø6.5mm (Ti) ORTOVIA Ant Solid Screw 75mm to 120mm 35mm Thread Ø6.5mm (Ti) ORTOVIA Ant Cannulated Screw 75mm to 120mm 35mm Thread Ø6.5mm (Ti) to to to to to to ORTOVIA microant Solid Screw 16mm to 30mm Ø2.5mm (Ti) ORTOVIA microant Cannulated Screw 16mm to 30mm Ø2.5mm (Ti) ORTOVIA microant Solid Screw 16mm to 30mm Ø3.0mm (Ti) ORTOVIA microant Cannulated Screw 16mm to 30mm Ø3.0mm (Ti) ORTOVIA microant Solid Screw 16mm to 30mm Ø3.5mm (Ti) ORTOVIA microant Cannulated Screw 16mm to 30mm Ø3.5mm (Ti) Headquarters: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, Bahcelievler / Istanbul E- mail: info@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 14, Esenler / Istanbul research@spinamer.com Factory: Sanayi Mah Sok. No: Esenyurt / Istanbul Tel: Fax: factory@spinamer.com Supported by kosgeb R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş

7 ACONDA DC Dynamic Screw System Stabilize Your Dynamic Compression Dynamic Compression Locked DC Cannulated Option Headless Design Self Drillingtapping Percutenous Application ACONDA DC SCREW 1. Cannulated 2. Percutanous Stalize your dynamic compression Insufficient quantity or quality of the bone Patients with mental or neurological disability Foreign body sensitivity. Features: Available in cannulated and percutaneous solid screws. Designed to stalize large bone fragments. Threaded sleeve helps interfragmentary compression Threaded sleeve strengthens the screw stabilization Dynamic compression of the fragments Stabilization of dynamic compression Headless design minimizes soft tissue irritation Self drilling and tapping ability Material: Titanium alloy, stainless steel. Indications: Alignment and stabilization of large bone fragments Stabilization of periarticular fractures of large joints Nonunions or malunions of large bone fragments Arthrodesis of large joints; foot, knee, ankle, elbow Contraindications Small bone fragmens Active infection in surgical area Systemic contraindications for the surgery

8 Specifications Implant Specifications: Consist of 3 parts: 1. Sleeves: Threaded outer surface Diameter: 9.0mm 25mm and 32mm in lenght 2. Lag screws: Cannulated and percutaneous solid obtions Diameter: 6.5mm Lenght: 70,75,80,85,90,95,100,105,110,115,120,125,130 mm 3. Sleeve-stop screw: Fixes lag screw to sleeve ORTOVIA Aconda DC Screw to to to to to to to to ORTOVIA Aconda DC Screw Ø6.5mm x50 mm to 130mm (Stainless Steel) ORTOVIA Aconda DC Screw Ø6.5mm x50mm to 130mm (Titanium) ORTOVIA Aconda DC Screw Ø4.5mm x50mm to 100mm (Stainless Steel) ORTOVIA Aconda DC Screw Ø4.5mm x50mm to 100mm (Titanium) ORTOVIA Aconda DC Cannulated Screw Ø6.5mm x50 mm to 130mm (S. Steel) ORTOVIA Aconda DC Cannulated Screw Ø6.5mm x50mm to 130mm (Titanium) ORTOVIA Aconda DC Cannulated Screw Ø4.5mm x50mm to 100mm (S. Steel) ORTOVIA Aconda DC Cannulated Screw Ø4.5mm x50mm to 100mm (Titanium) ORTOVIA Aconda Sleeve Ø9.0mm x 32mm (Stainless Steel) ORTOVIA Aconda Sleeve Ø9.0mm x 32mm (Titanium) ORTOVIA Aconda Sleeve Ø9.0mm x 25mm (Stainless Steel) ORTOVIA Aconda Sleeve Ø9.0mm x 25mm (Titanium) Headquarters: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, Bahcelievler / Istanbul E- mail: info@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 14, Esenler / Istanbul research@spinamer.com Factory: Sanayi Mah Sok. No: Esenyurt / Istanbul Tel: Fax: factory@spinamer.com Supported by kosgeb R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş

9 ACONDA Pediatric Modular Hip Plate Modularity Minimaly Invasive Cannulated Lag Screw Adjustable Angle Trochanter Fixation Low Contact Surface ACONDA PEDIATRIC HIP PLATE SYSTEM Smallcut Locking Plate Smallcut Dynamic Plate Aconda Pediatric Hip Plate System fixes proximal femur in children sizes. The system has smallcut locking and dynamic models. Both titanium and stainless steel made models are available Features: Modularity Minimaly invasive Trochanter major fixation Adjustable plate angle Radial fit Unique plate tip Low contact surface Conical and low profile Dynamic and locking obtions Cannulated lag screw obtions Unique Screws with unique tip. Osteopenic bone Nonunions or malunions Contraindicated: İnfection of surgical region Severe osteoporosis and avascular necrosis Psychological conditions that the patient can not tolerate the postoperative regulation Metastatic or malignant disasees of the surgical area İndications: Indicated for fixation of proxiaml femur in children: Fractures of the trochanteric region: Osteotomies of the proximal femur Metastatic fracture of the proximal femur

10 Specifications ACONDA Pediatric Plate to to to to to to to to Dynamic Screw Ø4.0mm to to Locking Screw Ø4.5mm to to Locking Lag Screw Ø5.0mm ORTOVIA Aconda Pediatric Smallcut Dynamic Hip Plate 4mm (Stainless Steel) ORTOVIA Aconda Pediatric Smallcut Dynamic Hip Plate 4mm (Titanium) ORTOVIA Aconda Pediatric Smallcut Locking Hip Plate 4mm (Stainless Steel) ORTOVIA Aconda Pediatric Smallcut Locking Hip Plate 4mm (Titanium) ORTOVIA Aconda Pediatric Normocut Locking Hip Plate 4mm (Stainless Steel) ORTOVIA Aconda Pediatric Normocut Locking Hip Plate 4mm (Titanium) ORTOVIA Aconda Pediatric Normocut Dynamic Hip Plate 4mm (Stainless Steel) ORTOVIA Aconda Pediatric Normocut Dynamic Hip Plate 4mm (Titanium) VS Cortical Screw Ø4mm x 16mm to 42mm (Stainless Steel) VS Cortical Screw Ø4mm x 16mm to 42mm (Titanium) Ascends 2mm till 42mm VS Locking Cortical Screw Ø4.5mm x 20mm to 60mm (Stainless Steel) VS Locking Cortical Screw Ø4.5mm x 20mm to 60mm (Titanium) Ascends 5mm till 60mm to to to to Locking Lag Screw Ø5.0mm x 30mm to 100mm (Stainless Steel) Locking Lag Screw Ø5.0mm x 30mm to 100mm (Titanium) Locking Cannulated Lag Screw Ø5.0mm x 30mm to 100mm (Stainless Steel) Locking Cannulated Lag Screw Ø5.0mm x 30mm to 100mm (Titanium) Ascends 5mm till 100mm Specifications: Plate: Angled plate with 100 degrees. Plate bending site Trochanter major fixation canal Low contact surface Anatomic radial fit Unique tip for skin retractor Smallcut or normalcut options Dynamic or locking shaft holes Plate Sizes: 2,3,4,5,6-holes Lenght: 30,35,40.,90,95,100mm 4.5mm Locking Cortical Screw: 4.5mm locking cortical screw with 110 degree Lenght: 20,25,30,.60mm Unique screw tip for self drilling and tapping 4.0mm Cortical Shaft Screw: Locking or dynamic screw Lenght: 16,18,20 42mm Unique screw tip for self drilling and tapping Lag Screw: 5mm locking lag screw 115 degree to long part of the plate Cunnulated option Headquarters: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, Bahcelievler / Istanbul E- mail: info@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 14, Esenler / Istanbul research@spinamer.com Factory: Sanayi Mah Sok. No: Esenyurt / Istanbul Tel: Fax: factory@spinamer.com Supported by kosgeb R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş

11 HyperFlex Spinal System HyperFlex Flexible Stability Modularity Polyaxial Screw Monoaxial Screw Hyperflex Screw Cannulated Screw Reduction Screw MONOPOLY SPINAL SYSTEM (Adult Set) The system has modular design: Polyaxial, monoaxial, reduction and cannulated screws are represented as tulip head and screw shafts separately offering wide range of combination. Ergonomic tool design offers safer and shorter operation time. ADVANTAGES: Moduler cups and screw shafts for various combinations Pratical and safe design Easy screw application Double flattened rod for derotation effect Eeasy transverse connector application Easy rod application with practical rod suppressor Practical and safe set screw design and application Low profile screw design Safer for screw pull out Ergonomic and anatomic tool design Failed fusion CONTRAINDICATIONS: Morbid obesity Severe psychiatric diseases Alcoholism and drug addiction Pregnancy Metal sensetivity / allergies Severe osteoporosis INDICATIONS: Posterior stabilization of thoracic and lumbar spine pathologies: Trauma Deformities: scoliosis,kyphosis, Degenerative spine diseases Spondylolisthesis Spinal stenosis Tumor Pseudoarthrosis

12 Specifications ORTOVIA Hyperflex Spinal System to to to to to Hyperflex Poliaxial Pedicular Screw Ø5.0mm x 30 to 45mm Hyperflex Poliaxial Pedicular Screw Ø5.5mm x 30 to 45mm Hyperflex Poliaxial Pedicular Screw Ø6.0mm x 30 to 60mm Hyperflex Poliaxial Pedicular Screw Ø6.5mm x 35 to 60mm Hyperflex Poliaxial Pedicular Screw Ø7.0mm x 35 to 65mm to to to to to Hyperflex Monoaxial Pedicular Screw Ø5.0mm x 30 to 45mm Hyperflex Monoaxial Pedicular Screw Ø5.5mm x 30 to 45mm Hyperflex Monoaxial Pedicular Screw Ø6.0mm x 30 to 60mm Hyperflex Monoaxial Pedicular Screw Ø6.5mm x 35 to 60mm Hyperflex Monoaxial Pedicular Screw Ø7.0mm x 35 to 65mm to to to to Hyperflex Poliaxial Pedicular Canulated Ø5.5 x 30 to 55mm Hyperflex Poliaxial Pedicular Canulated Ø6.0 x 30 to 60mm Hyperflex Poliaxial Pedicular Canulated Ø6.5 x 35 to 60mm Hyperflex Poliaxial Pedicular Canulated Ø7.0 x 35 to 65mm to to to to Hyperflex Monoaxial Pedicular Canulated Ø5.5 x 30 to 55mm Hyperflex Monoaxial Pedicular Canulated Ø6.0 x 30 to 60mm Hyperflex Monoaxial Pedicular Canulated Ø6.5 x 35 to 60mm Hyperflex Monoaxial Pedicular Canulated Ø7.0 x 35 to 65mm to to to to to Hyperflex Poliaxial Redüksiyon Pedicular Screw Ø5.0mm x 30 to 45mm Hyperflex Poliaxial Redüksiyon Pedicular Screw Ø5.5mm x 30 to 45mm Hyperflex Poliaxial Redüksiyon Pedicular Screw Ø6.0mm x 30 to 60mm Hyperflex Poliaxial Redüksiyon Pedicular Screw Ø6.5mm x 35 to 60mm Hyperflex Poliaxial Redüksiyon Pedicular Screw Ø7.0mm x 35 to 65mm to to to to to Hyperflex Monoaxial Redüksiyon Pedicular Screw Ø5.0mm x 30 to 45mm Hyperflex Monoaxial Redüksiyon Pedicular Screw Ø5.5mm x 30 to 45mm Hyperflex Monoaxial Redüksiyon Pedicular Screw Ø6.0mm x 30 to 60mm Hyperflex Monoaxial Redüksiyon Pedicular Screw Ø6.5mm x 35 to 60mm Hyperflex Monoaxial Redüksiyon Pedicular Screw Ø7.0mm x 35 to 65mm Headquarters: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, Bahcelievler / Istanbul E- mail: info@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 14, Esenler / Istanbul research@spinamer.com Factory: Sanayi Mah Sok. No: Esenyurt / Istanbul Tel: Fax: factory@spinamer.com Supported by kosgeb R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş

13 Monopoly Spinal System Monopoly Practically Stable Modularity Polyaxial Screw Monopoly Screw Monopoly Reduction Cannulated Screw Polyaxial Reduction MONOPOLY SPINAL SYSTEM Adult set Pediatric set The system has modular design. Polyaxial, monoaxial and cannulated screws are represented as tulip head and screw shafts separately offering wide range of combination. Ergonomic tool design offers safer and shorter operation time. ADVANTAGES: Moduler cups and screw shafts for various combinations Pratical and safe design Easy screw application Double flattened rod for derotation effect Eeasy transverse connector application Easy rod application with practical rod suppressor Practical and safe set screw design and application Low profile screw design Safer for screw pull out Ergonomic and anatomic tool design The system is used for the following pathologies: Trauma Deformities: scoliosis,kyphosis, Degenerative disc disease Spondylolisthesis Spinal stenosis Tumor Pseudoarthrosis Failed fusion CONTRAINDICATIONS: Morbid obesity Severe psychiatric diseases Alcoholism and drug addiction Pregnancy Metal sensetivity / allergies Severe osteoporosis INDICATIONS: The spinal systems are used for posterior stabilization of thoracic and lumbar spine pathologies.

14 Specifications ORTOVIA Monopoly Spinal System to to to to to Monopoly Poliaxial Pedicular Screw Ø5.0mm x 30 to 45mm Monopoly Poliaxial Pedicular Screw Ø5.5mm x 30 to 45mm Monopoly Poliaxial Pedicular Screw Ø6.0mm x 30 to 60mm Monopoly Poliaxial Pedicular Screw Ø6.5mm x 35 to 60mm Monopoly Poliaxial Pedicular Screw Ø7.0mm x 35 to 65mm to to to to to Monopoly Monoaxial Pedicular Screw Ø5.0mm x 30 to 45mm Monopoly Monoaxial Pedicular Screw Ø5.5mm x 30 to 45mm Monopoly Monoaxial Pedicular Screw Ø6.0mm x 30 to 60mm Monopoly Monoaxial Pedicular Screw Ø6.5mm x 35 to 60mm Monopoly Monoaxial Pedicular Screw Ø7.0mm x 35 to 65mm to to to to Monopoly Poliaxial Pedicular Canulated Ø5.5 x 30 to 55mm Monopoly Poliaxial Pedicular Canulated Ø6.0 x 30 to 60mm Monopoly Poliaxial Pedicular Canulated Ø6.5 x 35 to 60mm Monopoly Poliaxial Pedicular Canulated Ø7.0 x 35 to 65mm to to to to Monopoly Monoaxial Pedicular Canulated Ø5.5 x 30 to 55mm Monopoly Monoaxial Pedicular Canulated Ø6.0 x 30 to 60mm Monopoly Monoaxial Pedicular Canulated Ø6.5 x 35 to 60mm Monopoly Monoaxial Pedicular Canulated Ø7.0 x 35 to 65mm to to to to to Monopoly Poliaxial Redüksiyon Pedicular Screw Ø5.0mm x 30 to 45mm Monopoly Poliaxial Redüksiyon Pedicular Screw Ø5.5mm x 30 to 45mm Monopoly Poliaxial Redüksiyon Pedicular Screw Ø6.0mm x 30 to 60mm Monopoly Poliaxial Redüksiyon Pedicular Screw Ø6.5mm x 35 to 60mm Monopoly Poliaxial Redüksiyon Pedicular Screw Ø7.0mm x 35 to 65mm to to to to to Monopoly Monoaxial Redüksiyon Pedicular Screw Ø5.0mm x 30 to 45mm Monopoly Monoaxial Redüksiyon Pedicular Screw Ø5.5mm x 30 to 45mm Monopoly Monoaxial Redüksiyon Pedicular Screw Ø6.0mm x 30 to 60mm Monopoly Monoaxial Redüksiyon Pedicular Screw Ø6.5mm x 35 to 60mm Monopoly Monoaxial Redüksiyon Pedicular Screw Ø7.0mm x 35 to 65mm Headquarters: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, Bahcelievler / Istanbul E- mail: info@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 14, Esenler / Istanbul research@spinamer.com Factory: Sanayi Mah Sok. No: Esenyurt / Istanbul Tel: Fax: factory@spinamer.com Supported by kosgeb R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş

15 ACONDA Modular Hip Plate System excellent hip solutions Minimaly invasive Anotomic plate Locking Dynamic Cannulated lag screws T.major Fixation Low contact surface ACONDA MODULAR HIP PLATE SYSTEM Smallcut Plate Normalcut Plate Aconda is an anatomic and dynamic plate for fixation of proximal femur having five modules to fix proximal femur. The system has normalcutl and smallcut models having locking and dynamic models. The material is MRI friendly stainless steel. Indications Fractures of proximal femur Combined fractures of the proximal femur and ipsilateral shaft fractures Metastatic fracture of the proximal femur Osteotomies of the proximal femur Osteopenic bone Nonunions or malunions Contraindications İnfection of surgical region Severe osteoporosis and avascular necrosis Metal sensitivity Metastatic or malignant disasees of the surgical area Psychological conditions that the patient can not tolerate the postoperative care

16 Specifications to to to to Aconda Smallcut Dynamic Plate 6mm (S. Steel) (2 to 8 holes) Aconda Smallcut Locking Plate 6mm (S. Steel) (2 to 8 hole) Aconda Normalcut Locking Plate 6mm (S. Steel) (2 to 8 hole) Aconda Normalcut Dynamic Plate 6mm (S. Steel) (2 to 8 holes) to to Aconda Dynamic Compression Screw ø 6.5mm (S. Steel) (50 to 130mm) Aconda Cannulated Dynamic Comp. Screw ø 6.5mm (S. Steel) (50 to 130mm) Aconda Compression Threaded Sleeve ø 9.0 X 32mm (S. Steel) Aconda Compression Threaded Sleeve ø 9.0 X 25mm (S. Steel) to Aconda Major Screw ø 3.5mm (S. Steel) X 16mm to 60mm to to VS Cortical Screw ø 5.0mm (S. Steel) x 20mm to 70mm VS Cortical Locking Screw ø 5.0mm (S. Steel) x 20mm to 70mm Ortovia Cable ø 1.6mm ( S. Steel) Ortovia Cable ø 1.7mm ( S. Steel) Ortovia Cable ø 2.0mm (S. Steel) Headquarter & Sales: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, Bahcelievler / Istanbul info@spinamer.com, sales@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 114, Esenler / Istanbul research@spinamer.com Factory: Sanayi Mah Sok. No: Esenyurt / Istanbul Tel: Fax: factory@spinamer.com Supported by kosgeb R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş

17 ORTOVIA Upper Extremity Smart Fixation Dorsal-side fixing radiolucent Joint telescopic Body Slyding clamp Easy lengthening MRI Compatability Fixat Types Wrist Forearm Humerus ORTOVIA Upper Extremity Fixator System is a series of modular monolateral external fixators for upper extremity that was developed under many years of clinical experience. The system is composed of wrist, forearm and humerus fixators. Features Modularity Easy application Short surgery time MRI compatability Flexibility-versatility Stability & safety in corrections Patient s comfort Radiolucent components Short learning curve Indications Bone loss Open fractures Comminuted fractures Non-union Angular deformities Limb reconstruction

18 Specifications Ortovia Slyding Clamp Small Ortovia Metaphysis Clamp Small Ortovia Polyclamp Small Ortovia Open Clamp Small Ortovia 3D Joint Small Ortovia Hinge Joint Small Ortovia Fixator Body LS10 Ortovia Fixator Body LS20 Ortovia Fixator Body LS25 Ortovia Wrist Fixator Short Ortovia Wrist Fixator Long Ortovia Shanz Screw 20mm Thread (S.Steel) Ø3X50MM Ortovia Shanz Screw 20mm Thread (S.Steel) Ø3X60MM Ortovia Shanz Screw 20mm Thread (S.Steel) Ø3X70MM Ortovia Shanz Screw 35mm Thread (S.Steel) Ø3X70MM Ortovia Shanz Screw 35mm Thread (S.Steel) Ø4X70MM Ortovia Shanz Screw 35mm Thread (S.Steel) Ø4X80MM Ortovia Shanz Screw 20mm Thread (Titanium) Ø3X50MM Ortovia Shanz Screw 20mm Thread (Titanium) Ø3X60MM Ortovia Shanz Screw 20mm Thread (Titanium) Ø3X70MM Ortovia Shanz Screw 35mm Thread (Titanium) Ø3X70MM Ortovia Shanz Screw 35mm Thread (Titanium) Ø4X70MM Ortovia Shanz Screw 35mm Thread (Titanium) Ø4X80MM Headquarter & Sales: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, Bahcelievler / Istanbul info@spinamer.com, sales@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 114, Esenler / Istanbul research@spinamer.com Factory: Sanayi Mah Sok. No: Esenyurt / Istanbul Tel: Fax: factory@spinamer.com Supported by kosgeb R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş

19 Ortovia android External Lengthening System Software Control Remote Access Internet Connection Lengthening Shortening Precise Mechatronic Ortovia android Lengthening system designed to be used in lengthening and shortening purpose of the limb is a rigid and precision mechatronic external lengthening system. Ortovia app. is a spetial android-based software that authrized orthopedic surgeon can program and operate the system with remote access via the Internet. On this system Ortovia.app is installed in patient s mobile phone, the doctor by his mobile phone or PC can reach the relevant patient s lengthening system and obtain information about the current situation, and also he can reprogram the lengthening or shortening process. Indications: lengthening and shortening process in long bones Contraindications: In case the patient does not have enough psychological and intellectual abilities to sustain the operation and postoperative treatment. Other known contraindications of limb lengthening process.

20 Specifications Ortovia L30 android fixator Ortovia L25 android fixator Ortovia L20 android fixator Ortovia LS25 android fixator Ortovia LS20 android fixator Ortovia LR25 android fixator Ortovia LR20 android fixator Ortovia LRS20 android fixator ORTOVIA SLYDING CLAMP ORTOVIA SLYDING CLAMP 1/2 ORTOVIA METAPHYSIS CLAMP ORTOVIA POLYCLAMP Electronic Control Unit Ortovia app. Software Headquarter & Sales: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, Bahcelievler / Istanbul info@spinamer.com, sales@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 114, Esenler / Istanbul research@spinamer.com Factory: Sanayi Mah Sok. No: Esenyurt / Istanbul Tel: Fax: factory@spinamer.com Supported by kosgeb R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş