How To Expand A Bus Slot On A Microsoft Powerbook (For Microsoft) (For A Microsusceptible) (Powerbook) (Microsuspera) ( For A Microsimplified) (Mini-S

Transcription

1 Product We provide wide array of models to meet your desired bus specifications. Bus Extension & Chassis O03 System Expansion Unit / Bus An expansion system is used to expand the number of available bus slots of either CONTEC industrial computers or standard PCs. It is also useful in applications where the power consumption of addon boards exceeds the capacity of the host PC. An expansion system is used to join the expansion chassis and the host PC into one system. Expansion adapter Standard Bus extension This bus extension externally expands bus and transmits signals directly between the expansion chassis and host PC. It is best suited for use in an environment where the measurement control is conducted in close proximity to the host PC. * The expansion adapters to be inserted in the PC and expansion chassis are connected with a 1mlong connection cable. Bus expansion chassis Connecting cable (1m) Expansion adapter & Chassis O0 extension With this style extension, you can conduct highspeed serial transfer (.5Gbps). The expansion adapters to be inserted into the PC and expansion chassis are connected using Category 5e cable creating easy wiring and installation. The included cable can be extended up to 1m, making it an optimal choice where measure / control is conducted at a distance from the host PC. bus compliant, it allows you to construct a system without changing existing boards or software. The of the expansion chassis can be controlled in synchronization with the host PC. category 5e cables (Max. 1m)* Expansion chassis Bus expansion chassis * Category 5e twistedpair cable can be used. In high noise environments use of shielded type (STP) is recommended. Expansion adapter Caution: Please note that the following expansion boards cannot be used inside an expansion chassis. Video boards Additional bus expansion boards Boards with the disclaimer "Cannot be used with to Bridge" Please note that even when a board is compatible with bus specifications, it may not operate due to specification limitations. * For further details, please check the manual or visit our web site. Expansion unit An expansion adapter is an adapter that connects a host PC to an expansion chassis for the purpose of extending highspeed signal transmission. It is not possible to link one expansion chassis to another expansion chassis due to resultant signal degradation. When using more than one expansion chassis, you must allocate an open slot to each chassis for a parallel connection.

2 Bus BoxPCs PanelPCs Bus Extension & Chassis Name EADBELPE EAD(L)BE EAD()BE EAD(CB)BEN ISA Unit ( included) Name FAPAC(PC)MD FAPAC(PC)F1DRV *1: Maximum board length is 0mm. *: Expansion bus adaptor occupies 1 slot from available slot. Bus Name Name BUFCARD(PC)P PCCARD(PC)H Express (for Low Profile Bus slot) (for Low Profile Bus slot) CardBus Bus & Chassis Name EADSFLPE EAD(L)SF EAD(CB)SF BUF() BUF() BUF(PC)E Express (for Low Profile Bus slot) (for Low Profile Bus slot) CardBus Installation Expansion Drive Installable Board Desktop Rack Mount Wall Mount Bay Full Middle Half to ( slot) to ( slot) ISA to ISA PC Card to ISA ISA to PC Card None Standard Included Included Name ECH()BEHB ECH()BEHB ECH()BEFB ECH()BEFB ECH()BEHA ECH()BEHA ECH()BEHA ECH()BEFA ECH()BEFA Bus Name ECH()SFHB ECH()SFHB ECH()SFFB ECH()SFFB ECH()SFHA ECH()SFHA ECH()SFHA ECH()SFFA ECH()SFFA * 1* * 1 Installation Installable Board Desktop Rack Mount Wall Mount Installable Unit of Bus (FAUNIT**) F8DR F8DR F8DR/M F8DR/M Installation Installable Board Desktop Rack Mount Wall Mount F11RFV M11RFV I/O Bus MultiProgrammable O0 Bus Extension Lowcost Multifunction L series Pictograms Expansion adapter Express Card Bus Product is Express standard compliant and can be used in the computer equipped with Express bus expansion slot. Product supports Cardbus that is a 3bit PC card standard bus. PC Board Low Profile Product is standard compliant and can be used in the computer equipped with bus expansion slot. Product is standard/low Profile compliant. A bracket for standardsize slots is provided. Expansion chassis X Slot XX Builtin AC Maximum number of boards that can be installed Maximum board size that can be installed Expansion chassis is equipped with builtin. Includes AC adapter. The expansion chassis has no builtin power source.

3 Bus BoxPCs PanelPCs I/O Bus MultiProgrammable Bus Extension Selecting Optimal and Bus Extension is best suited for use in an environment where the control is conducted in close proximity to the PC unit. If the expansion unit needs to be further away (up to 1m max), select from the system list on O0 CONTEC offers 3 different configurations based on the type of host PC, needed number and lengths of slots. Expansion adapter for CardBus slot (PC side) EAD(CB)BE Supported OS Vista PC equipped with CardBuscompliant card slot XP Me O0 A dedicated B6connection cable (1m) is included. PC equipped with standard /Low Profile slot Stylish compact black chassis expansion chassis (Includes AC adapter) ECH()BEHB ECH()BEHB ECH()BEFB ECH()BEFB Solid steel industrial chassis ECH()BEHA AC adapter AC adapter Builtin AC adapter AC adapter O05 O05 O05 O05 bus expansion chassis (Builtin ) O06 O03 Bus Extension Expansion adapter for Express compliant Low Profile bus slot (host PC) EADBELPE O0 ECH()BEHA Builtin ECH()BEHA Builtin Builtin Builtin O06 O06 A dedicated connection cable (1m) and standard bus bracket are included. Expansion adapter for compliant Low Profile bus slot (host PC) EAD(L)BE A dedicated connection cable (1m) and standard bus bracket are included. Expansion adapter for bus slot (host PC) EAD()BE O0 O0 A dedicated connection cable (1m) is included. size: A shortsize board can be installed size: A longsize board can be installed Note to customers using the CONTEC's conventional expansion units [FAPAC() and NOTEPAC(PC) Series] When replacing conventional expansion units with expansion chassis and adapters, please refer to the following table so that you can purchase a complete unit with the same specifications as those of the conventional models. bus expansion system FAPAC()H FAPAC()F FAPAC()F CardBus to bus expansion system NOTEPAC()H NOTEPAC()H = = = = = ECH()BEFA ECH()BEFA Expansion adapter EAD()BE EAD()BE EAD()BE EAD(CB)BEN EAD(CB)BEN Builtin Builtin O0 O0 Expansion chassis EAD()BEHA EAD()BEFA EAD()BEFA EAD()BEHB EAD()BEHA

4 Bus Express Express bus slot (Host PC) L bus slot (Host PC) EAD(L)BE bus (5V/3bit 33MHz) can be added using one Low Profile or Standard slot of the host PC Expansion chassis can be selected to meet the required number of bus slot and size of addon board The expansion chassis can be Both Low Profile and Standard slots are supported by using the included bracket bus slot (Host PC) EAD()BE bus (5V/3bit 33MHz) can be added using one slot of the host PC Expansion chassis can be selected to meet the required number of bus slot and size of addon board The expansion chassis can be Card Bus bus (5V/3bit 33MHz) can be added using one Express slot of the host PC. Expansion chassis can be selected to meet the required number of bus slot and size of addon board The expansion chassis can be. Both Low Profile and Standard slots are supported by using the included bracket. CardBus slot expansion adapter (Host PC) EAD(CB)BEN bus (5V/3bit 33MHz) can be added using one CardBus slot of the host PC Expansion chassis can be selected to meet the required number of bus slot and size of addon board The expansion chassis can be Supported OS: XP, 000, Me, 98SE and 98 SUPPORTED OS EADBELPE Vista Low Profile XP Me Low Profile A dedicated device driver needs to be installed under XP and 000. NT.0 and 95 are not supported. BoxPCs PanelPCs I/O Bus MultiProgrammable O0 Bus Extension Lowcost Multifunction L series Card slot Bus Operating Clock Consumption (Max.) Attached cable EADBELPE Express Base Specification Rev.1.0a 11.69(L) 6.90(H) 3.3VDC 300mA (Max.) 0~50ºC, 10~90%RH (no condensation) CBCB68/96 (cable length: 1m) * 1 EAD(L)BE EAD()BE Local Bus Specification Rev.3 (+5V / +3.3V) 11.69(L) 63.1(H) 11.69(L) (H) 33MHz (Max.) 3.3VDC 00mA (Max.) <JP1 1 >, 5VDC 00mA (Max.) <JP1 3 > CBBF96 (cable length: 1m) * 1 *1: Only the cable included with the unit can be used. *: This product can be used with the [ECH()BEFA, FA, HA, HA] expansion chassis under Vista only. Other operating systems cannot support the combination of EAD(CB)BEN and [ECH()BEFA, FA, HA, HA]. EAD(CB)BEN * PC Card Standard CardBus TYPE II ( ) 3.3VDC 00mA (Max.) CBCB68/96 (cable length: 1m) * 1 As shown on the side of product's images, RoHS compliant is a CONTEC original marking for RoHScompliant products.

5 Industrial Automation Products Bus BoxPCs PanelPCs I/O Bus MultiProgrammable bus expansion chassis ( size slots, AC ) ECH()BEHB bus expansion chassis ( size slots, AC ) ECH()BEHB expansion slots Length accomodates shortsize addon boards (5V/3bit) The chassis can be turned on & off with the host PC Equipped with a builtin cooling fan The compact chassis design combines spacesaving system configuration with portability Including an AC adapter expansion slots Length accomodates shortsize addon boards (5V/3bit) The chassis can be turned on & off with the host PC Equipped with a builtin cooling fan The compact chassis design combines spacesaving system configuration with portability Including an AC adapter bus expansion chassis ( size slots, AC ) ECH()BEFB bus expansion chassis ( size slots, AC ) ECH()BEFB expansion slots Length accomodates longsize addon boards (5V/3bit) The chassis can be turned on & off with the host PC Equipped with a builtin cooling fan The compact chassis design combines spacesaving system configuration with portability Including an AC adapter expansion slots Length accomodates longsize addon boards (5V/3bit) The chassis can be turned on & off with the host PC Equipped with a builtin cooling fan The compact chassis design combines spacesaving system configuration with portability Including an AC adapter O05 Address Space Interrupt Level Bus Clock User slots Installable Board (mm) supply capacity (Max.) AC input voltage Overall maximum capacity ECH()BEHB ECH()BEHB Local Bus Specification Rev.3 (+5VDC) Memory: 3bit addressing, I/O: 3bit addressing INTAINTD 33MHz (Max.) (size) (size) 16.5(L) 10(H) Output current shall not exceed the following values. +5VDC: A, +3.3VDC: 3A, +1VDC: 1.5A, 1VDC: 0.3A 100 to 0VAC 60W 0~50ºC, 0~80%RH (no condensation) ECH()BEFB (size) 3.8(L) 10(H) ECH()BEFB (size) 1.0(W).0(D) 1.0(H) 11.0(W).0(D) 1.0(H) 1.0(W) 360.0(D) 1.0(H) 11.0(W) 360.0(D) 1.0(H) Bus Extension Weight of Chassis Weight of AC 1.kg 0.9kg 1.5kg 1.6kg.0kg Dimensions ECH()BEHB ECH()BEFB (Unit:mm) ECH()BEHB ECH()BEFB

6 Industrial Automation Products Bus bus ( size slots, On board ) ECH()BEHA Builtin bus ( size slots, On board ) ECH()BEHA Builtin BoxPCs PanelPCs expansion slots Length accomodates shortsize addon boards (5V/3bit) The chassis can be expansion slots Length accomodates shortsize addon boards (5V/3bit) The chassis can be bus ( size slots, On board ) ECH()BEHA Builtin I/O expansion slots Length accomodates shortsize addon boards (5V/3bit) The chassis can be Bus MultiProgrammable Address Space Interrupt Level Bus Clock User slots Installable Board (mm) ECH()BEHA ECH()BEHA * 5 ECH()BEHA * 5 supply capacity (Max.) +5VDC: 11.3A, +3.3VDC: 6A, +1VDC: 3A, 1VDC: 0.A AC input voltage Overall maximum capacity * 1 Weight Local Bus Specification Rev.3 (+5VDC) Memory: 3bit addressing, I/O: 3bit addressing INTAINTD 33MHz (Max.) (shortsize) (shortsize) 16.5(L) 10(H) 115/30VAC (switch selectable) 0W * 3 0~50ºC, 0~80%RH (no condensation) 10.0(W) 35.0(D) 8.0(H) 3.5kg 300.0(W) 8.0(H) 55.0(L) 5.0kg (shortsize) +5VDC: 18A*, +3.3VDC: 15A*, +1VDC: 9A, 1VDC: 0.8A 0~30ºC: 30W, 30~0ºC: 05W, 0~50ºC: 15W *.0(W) 156.0(H) 55.0(L).5kg *1: AC input line voltage range: 90 VAC and VAC. *: The sum of +5VDC and +3.3VDC must not exceed 90W. *3: Condition with CE marking: 0W at 0ºC. *: Condition with CE marking: 15W at 50ºC. *5: This product cannot be used with the expansion adapter [EAD(CB)BE]. O06 Bus Extension Dimensions ECH()BEHA ECH()BEHA (Unit:mm) Lowcost Multifunction L series ECH()BEHA

7 Industrial Automation Products Bus BoxPCs PanelPCs bus ( size slots, On board ) ECH()BEFA Builtin bus ( size slots, On board ) ECH()BEFA Builtin expansion slots Length accomodates longsize addon boards (5V/3bit) The chassis can be expansion slots Length accomodates longsize addon boards (5V/3bit) The chassis can be I/O Bus MultiProgrammable O0 Bus Extension Address Space Interrupt Level Bus Clock User slots Installable Board (mm) supply capacity (Max.) AC input voltage Overall maximum capacity * 1 Weight ECH()BEFA * 5 ECH()BEFA * 5 Local Bus Specification Rev.3 (+5VDC) Memory: 3bit addressing, I/O: 3bit addressing INTAINTD 33MHz (Max.) (size) 3.8(L) 10(H) +5VDC: 11.3A, +3.3VDC: 6A, +1VDC: 3A, 1VDC: 0.A 115/30VAC (switch selectable) 0~30ºC: 30W, 30~0ºC: 05W, 0W * 3 0~50ºC: 15W * 0~50ºC, 0~80%RH (no condensation) 300.0(W) 8.0(H) 33.(L) 6.0kg (size) +5VDC: 18A*, +3.3VDC: 15A*, +1VDC: 9A, 1VDC: 0.8A".0(W) 156.0(H) 33.(L) 9.0kg *1: AC input line voltage range: 90 VAC and VAC. *: The sum of +5VDC and +3.3VDC must not exceed 90W. *3: Condition with CE marking: 0W at 0ºC. *: Condition with CE marking: 15W at 50ºC. *5: This product cannot be used with the expansion adapter [EAD(CB)BE]. Dimensions ECH()BEFA ECH()BEFA 33. (Unit:mm)

8 Bus Selecting Optimal and A system is best suited for measurement control when distance between host PC and chassis is required. When using an expansion chassis in close proximity to the host PC, select from the Bus Extension list on O03 CONTEC offers 3 different configurations based on the type of host PC, needed number and lengths of slots. PC equipped with CardBuscompliant card slot Stylish compact black chassis expansion chassis (Includes AC adapter) BoxPCs PanelPCs Expansion adapter for CardBus slot (PC side) EAD(CB)SF Supported OS XP (1m) Category 5e STP cables are included. 000 O09 ECH()SFHB ECH()SFHB ECH()SFFB ECH()SFFB AC adapter AC adapter AC adapter AC adapter O10 O10 O10 O10 I/O Bus MultiProgrammable PC equipped with standard /Low Profile slot Solid steel industrial chassis bus expansion chassis (Builtin ) ECH()SFHA Builtin O11 O08 Expansion adapter for Express compliant Low Profile bus slot (host PC) EADSFLPE O09 (1m) Category 5e STP cables and standard bus bracket included Expansion adapter for compliant Low Profile bus slot (host PC) EAD(L)SF ECH()SFHA ECH()SFHA ECH()SFFA ECH()SFFA Builtin Builtin Builtin Builtin O11 O11 O1 O1 Bus Extension Lowcost Multifunction L series O09 size: A shortsize board can be installed size: A longsize board can be installed (1m) Category 5e STP cables and standard bus bracket included * Category 5e twistedpair cable can be used. In high noise environments, shielded cable (STP) is recommended.

9 Bus BoxPCs PanelPCs Express Low Profile Express bus slot (Host PC) EADSFLPE bus (5V/3bit 33MHz) can be added using one Express slot of the host PC 1m bus expansion and highspeed serial transfer (.5Gbps)are supported bus compatibility helps users to use bus boards in expansion units without changing existing software Uses noise resistant Category 5e STP cable easy wiring and installation Expansion chassis can be selected to meet the required number of bus slot and size of addon board The expansion chassis can be Both Low Profile and Standard slots are supported by using the included bracket Low Profile I/O Bus MultiProgrammable L bus slot (Host PC) EAD(L)SF bus (5V/3bit 33MHz) can be added using one Low Profile or Standard slot of the host PC 1m bus expansion and highspeed serial transfer (.5Gbps)are supported buscompliant, eliminating any need to change addon boards or software Uses noise resistant Cat 5e STP cable easy wiring and installation The expansion chassis can be Expansion chassis can be selected to meet the required number of bus slot and size of addon board Both Low Profile and Standard slots are supported by using the included bracket O09 Bus Extension Card Bus CardBus slot (Host PC) EAD(CB)SF expansion (5V/3bit 33MHz) using CardBus slot of the note PC 1m bus expansion and highspeed serial transfer (.5Gbps)are supported Uses noise resistant Cat 5e STP cable easy wiring and installation The expansion chassis can be Expansion chassis can be selected to meet the required number of bus slot and size of addon board SUPPORTED OS XP 000 A dedicated device driver needs to be installed under XP and 000. Bus / (mm) Consumption (Max.) Attached cable * 1 EADSFLPE EAD(L)SF EAD(CB)SF * Express Base Specification Rev.1.0a / 11.69(L) 6.90(H) 3.3VDC 00mA (Max.) 0~50ºC, 10~90%RH (no condensation) Category 5e STP cables (1m) Local Bus Specification Rev. PC Card Standard CardBuscompliant / TYPE II (+5V / +3.3V) / 11.69(L) 63.1(H) ( ) 3.3VDC 50mA (Max.) <JP1 1 >, 3.3VDC 50mA (Max.) 5VDC 350mA (Max.) <JP1 3 > *1: Category 5e twistedpair cable can be used. In noisy environments shielded cable (STP) is recommended. *: This product cannot be used with the expansion chassis [ECH()SFFA, FA]. 0~50ºC, 0~90%RH (no condensation)

10 POWE R POWE R Industrial Automation Products Bus bus ( size slots, AC ) ECH()SFHB bus ( size slots, AC ) ECH()SFHB expansion slots Length accomodates shortsize addon boards (5V/3bit) The chassis can be turned on & off with the host PC Equipped with a builtin cooling fan The compact chassis design combines spacesaving system configuration with portability Includeing an AC adapter expansion slots Length accomodates shortsize addon boards (5V/3bit) The chassis can be turned on & off with the host PC Equipped with a builtin cooling fan The compact chassis design combines spacesaving system configuration with portability Includeing an AC adapter bus ( size slots, AC ) ECH()SFFB bus ( size slots, AC ) ECH()SFFB expansion slots Length accomodates longsize addon boards (5V/3bit) The chassis can be turned on & off with the host PC Equipped with a builtin cooling fan The compact chassis design combines spacesaving system configuration with portability Includeing an AC adapter expansion slots Length accomodates longsize addon boards (5V/3bit) The chassis can be turned on & off with the host PC Equipped with a builtin cooling fan The compact chassis design combines spacesaving system configuration with portability Includeing an AC adapter BoxPCs PanelPCs I/O Bus MultiProgrammable Address Space Interrupt Level Bus Clock User slots Installable Board (mm) supply capacity (Max.) AC input voltage Overall maximum capacity ECH()SFHB ECH()SFHB Local Bus Specification Rev. (+5VDC) Memory: 3bit addressing, I/O: 3bit addressing INTAINTD 33MHz (Max.) (size) (size) 16.5(L) 10(H) The output current shall not exceed the following values. +5VDC: A, +3.3VDC: 3A, +1VDC: 1.5A, 1VDC: 0.3A 100 to 0VAC 60W 0~50ºC, 0~80%RH (no condensation) ECH()SFFB (size) 3.8(L) 10(H) ECH()SFFB (size) O10 1.0(W).0(D) 1.0(H) 11.0(W).0(D) 1.0(H) 1.0(W) 360.0(D) 1.0(H) 11.0(W) 360.0(D) 1.0(H) Weight of Chassis Weight of AC 1.kg 0.9kg 1.5kg 1.6kg.0kg Bus Extension Dimensions ECH()SFHB ECH()SFFB (Unit:mm) Lowcost Multifunction L series ECH()SFHB ECH()SFFB

11 Industrial Automation Products Bus BoxPCs PanelPCs bus ( size slots, On board ) ECH()SFHA Builtin bus ( size slots, On board ) ECH()SFHA Builtin expansion slots Length accomodates shortsize addon boards (5V/3bit) The chassis can be expansion slots Length accomodates shortsize addon boards (5V/3bit) The chassis can be t urned on & off with the host PC I/O bus ( size slots, On board ) ECH()SFHA Builtin Bus MultiProgrammable expansion slots Length accomodates shortsize addon boards (5V/3bit) The chassis can be O11 Bus Extension Address Space Interrupt Level Bus Clock User slots Installable Board (mm) Dimensions ECH()SFHA ECH()SFHA ECH()SFHA * 5 ECH()SFHA * 5 supply capacity (Max.) +5VDC: 11.3A, +3.3VDC: 6A, +1VDC: 3A, 1VDC: 0.A AC input voltage Overall maximum capacity * 1 Weight Local Bus Specification Rev.3 (+5VDC) Memory: 3bit addressing, I/O: 3bit addressing INTAINTD 33MHz (Max.) (shortsize) (shortsize) 16.5(L) 10(H) 115/30VAC (switch selectable) 0W * 3 0~50ºC, 0~80%RH (no condensation) 10.0(W) 35.0(D) 8.0(H) 3.5kg (W) 8.0(H) 55.0(L) 5.0kg (shortsize) +5VDC: 18A*, +3.3VDC: 15A*, +1VDC: 9A, 1VDC: 0.8A 0~30ºC: 30W, 30~0ºC: 05W, 0~50ºC: 15W *.0(W) 156.0(H) 55.0(L).5kg *1: AC input line voltage range: 90 VAC and VAC. *: The sum of +5VDC and +3.3VDC must not exceed 90W. *3: Condition with CE marking: 0W at 0ºC. *: Condition with CE marking: 15W at 50ºC. *5: This product cannot be used with the expansion adapter [EAD(CB)BE]. ECH()SFHA (Unit:mm) ECH()SFHA

12 Industrial Automation Products Bus bus ( size slots, On board ) ECH()SFFA Builtin bus ( size slots, On board ) ECH()SFFA Builtin BoxPCs PanelPCs expansion slots Length accomodates longsize addon boards (5V/3bit) The chassis can be expansion slots Length accomodates longsize addon boards (5V/3bit) The chassis can be I/O Bus MultiProgrammable Address Space Interrupt Level Bus Clock User slots Installable Board (mm) supply capacity (Max.) AC input voltage Overall maximum power supply capacity * 1 Weight ECH()SFFA * 5 ECH()SFFA * 5 Local Bus Specification Rev.3 (+5VDC) Memory: 3bit addressing, I/O: 3bit addressing INTAINTD 33MHz (Max.) (size) 3.8(L) 10(H) +5VDC: 11.3A, +3.3VDC: 6A, +1VDC: 3A, 1VDC: 0.A 115/30VAC (switch selectable) 0~30ºC: 30W, 30~0ºC: 05W, 0W * 3 0~50ºC: 15W * 0~50ºC, 0~80%RH (no condensation) 300.0(W) 8.0(H) 33.(L) 6.0kg (size) +5VDC: 18A*, +3.3VDC: 15A*, +1VDC: 9A, 1VDC: 0.8A.0(W) 156.0(H) 33.(L) 9.0kg *1: AC input line voltage range: 90 VAC and VAC. *: The sum of +5VDC and +3.3VDC must not exceed 90W. *3: Condition with CE marking: 0W at 0ºC. *: Condition with CE marking: 15W at 50ºC. *5: This product cannot be used with the expansion adapter [EAD(CB)BE]. O1 Bus Extension Dimensions ECH()SFFA ECH()SFFA 33. (Unit:mm) Lowcost Multifunction L series

13 Bus BoxPCs PanelPCs slots ISA bus Chassis ( Middle size slots) FAPAC(PC)MD Middle Half Builtin 1slots ISA bus Chassis 1 Full ( 10 Full, Half size slots) FAPAC(PC)F1DRV Middle Half Builtin slots ISA bus passive backplane The FAPAC series are AT bus chassis that can be used for port expansion of a PC 1slots ISA bus passive backplane The FAPAC series are AT bus chassis that can be used for port expansion of a PC I/O Bus MultiProgrammable O Bus Extension User slots Installable Board (mm) supply capacity (Max.) AC input voltage Input current Rackmount FAN Drive bay Weight FAPAC(PC)MD (Middle size) * 1 0(L) 1(H) Max. +5V 8.0A, 5V 0.3A, +1V 1.5A, 1V 1.0A * 85 to 50VAC (50 to 60Hz) 1.5A 1 (front).5kg FAPAC(PC)F1DRV 1 ( 10 Full, Half size) * 1 Full size: 30.5(L) 1(H), Half size: 0(L) 1(H) Max. +5V 3.0A, 5V 0.1A, +1V 15.0A, 1V 0.5A 90 to VAC, 180 to 6VAC (50 to 60Hz) A(115VAC) / A(30VAC) EIA 19inch 5inch bay, 1 3.5inch bay (shadow bay) 1.0kg *1: These products can be used for both CPU unit and I/O expansion unit. To use the products as I/O expansion unit, 1 slot is used for I/O bus adapter. I/O bus adapter are purchased separately. *: Total maximum output electricity is 50W. Dimensions FAPAC(PC)MD 11 6 FAPAC(PC)F1DRV (Unit:mm) [18.0] Dimension in the [ ] brackets is the height including the rubber foot.

14 Bus to Bus Expansion System ( ) BUF() External backplane expansion slots function as regular slots Using ATX, Chassis can be turned on & off with the host PC. * It cannot be used in PC9800 series. to Bus Expansion System ( ) BUF() External backplane expansion slots function as regular slots Using ATX, Chassis can be turned on & off with the host PC. * It cannot be used in PC9800 series. BoxPCs PanelPCs I/O Bus MultiProgrammable Address space User slots Interrupt Level DMA Accessible I/O space Accessible Memory Bus Clock Consumption (Max.) Attached cable BUF() BUF() 3bit bus Rev.1 (+5V) I/O: 3bit addressing, Memory: 3bit addressing INTAINTD 33MHz (Max.) BUSPC() (PC side): +5VDC 00mA (Max.) / +5VDC 300mA (typ) BUSPAC() (Extension side: +5VDC 00mA(Max.) / +5VDC 500mA (typ) 0~50ºC, 30~90%RH(no condensation) BUSPC() (PC side): 1.0(L) 10.0(H) 18.5(D) BUSPAC() (Extension side): 1.0(L) 10.0(H) 18.5(D) PCMB8() (Back plane): 0.0(L) 185.0(H) 0.0(D) 96pin shielded cable, 1m * 1 BUSPC() (PC side): +5VDC 00mA (Max.) / +5VDC 300mA (typ) BUSPAC() (Extension side): +5VDC 1500mA (Max.) / +5VDC 900mA (typ) BUSPC() (PC side): 1.0(L) 10.0(H) 18.5(D) BUSPAC() (Extension side): 1.0(L) 10.0(H) 18.5(D) PCMB8() (Back plane): (L) 185.0(H) 0.0(D) *1: Only the Attached cable can be used. *:This product provides I/O access to ISA bus board. It is subject to software and hardware restrictions. Please contact General Information for details. O1 Bus Extension Lowcost Multifunction L series

15 Bus BoxPCs PanelPCs PCMCIA to ISA Bus Conversion System BUFCARD(PC)P Standard ISA slots can be connected from a PC Card (PCMCIA) slot of host PC. Supported OS: XP/000/98/ 95/3.1, MSDOS ISA to ISA Bus Expansion System BUF(PC)E Standard ISA slots can be connected from a ISA slot of host PC. ISA to PCMCIA Expansion Board PCCARD(PC)H I/O Bus MultiProgrammable Compatible with PC card I, II, and III based on PCMCIA.1 / J EIDA. or late Maximum pcs. can be mounted simultaneously on the same system. BUFCARD(PC)P * 1 PCMCIA to ISA Bus expansion BUF(PC)E ISA to ISA BUFCARD(PC)H Card slot JEIDA Ver..1 / PCMCIA Rel..0 (TYPE II) O15 Bus Extension Card type I/O Adress DMA Bus Clock Data Bus width Accessible I/O space Accessible Memory Interrupt Level Consumption (Max.) Applicable s Attached cable Bus / (mm) Not supported 8bit (16bit not available) I/O: 3 consecutive ports can be selected as following: 03F,05F,60F,809F,A0BF, C0DF,E0FF,30031F,3033F,3035F, 3603F,38039F,3A03BF,3C03DF,3E03FF Not supported One of IRQ 3~, 9~1, 1 or 15 (jumper selectable) BUSCARD(PM)P (PC side): +5VDC 100mA BUSCARD(PC) (Extension side): +5VDC 500mA 0~50ºC, 0~90%RH (no condensation) BUSPC() (PC side): 5.0(L) 85.6(H) 5.0(D) BUSPAC() (Extension side): 160.0(L) 1.0(H) 18.5(D) ATcompliant PC equipped with a card slot compatible with a JEIDA.1 / PCMCIA.0 or later II card (should be compatible with Card Service Release.0 or later) 3pin shielded cable, 1m * 8MHz 0000H FFFFH (unrelated to expansion bus adapters) H 09FFFFH (DIP switch selectable) 0C0000H 0DFFFFH (DIP switch selectable) H FEFFFFH (DIP switch selectable) IRQ 3, 91, 1, 15 (rotary SW selectable) BUSPC(PC)E (PC side): +5VDC 300mA BUSPAC(PC)E (Extension side): +5VDC 500mA 0~50ºC, 30~90%RH (no condensation) Both PC & Extension side: 160.0(L) 1.0(H).0(D) 96pin shielded cable, 1m * PC Card: JEIDA. / PCMCIA.0 or later TYPE I, II, III ( consumption 1.A Max.) ports (X3E0h, X3E1) +5VDC 150mA (without PC Card) 0~50ºC, 0~90%RH (no condensation) ISA / 160(L) 10(H) *1: There might be boards that cannot be used in some conditions. Please contact General Information for details. *: Only the Attached cable can be used.

16 Bus BoxPCs AC power supply FAN FAN (with a sensor) Filter (10 pcs) *1: al parts POW300 POW301 POW100 POW300X POW50X POW51X POW150X FAN138 FAN095 FAN080 FAN15S FAN095S FAN085S FLT10 FLT11 FLT90 FLT91 FLT9 FLT93 FLT80 FLT81 Chassis FAPAC(PC)F1DRV, FAPAC(PC)F1DR, FAUNITF8DR/M, FAUNITF8DR FAPAC(PC)H1RF FAUNITF11RFV, FAUNITF6RFV, FAUNITM11RFV, FAUNITM6RFV FAUNITF1BE, FAUNITF1ME, FAUNITF11BE, FAUNITF11ME, FAUNITM11BE FAUNITM11ME, FAUNITM6BE, FAUNITMBE, FAUNITF6BE/U FAPAC(PC)F, ECH()BEFA, ECH()SFFA, ECH()BEHA, ECH()SFHA FAUNITHBE FAPAC(PC)F, FAPAC(PC)H, ECH()BEHA, ECH()BEFA, ECH()SFHA, ECH()SFFA, ECH()BEHA, ECH()SFHA FAPAC(PC)F1DRV, FAUNITF8DR/M, FAUNITF8DR, FAUNIT**RFV series * 1 FAPAC(PC)F1DR, FAPAC(PC)H1RF, FAUNITF6DR, FAPAC(PC)F, FAPAC(PC)F, FAPAC(PC)H, ECH(PC)BEHA, ECH(PC)BEFA, ECH(PC)BEFA, ECH(PC)SFHA, ECH(PC)SFFA, ECH(PC)SFFA, ECH(PC)BEHA, ECH(PC)BEHA, ECH(PC)SFHA, ECH(PC)SFHA FAPAC(PC)MD, FAPAC(PC)H5DR FAUNITF1BE, FAUNITF1ME, FAUNITF11BE, FAUNITF11ME, FAUNITM11BE, FAUNITM11ME, FAUNITM6BE, FAUNITMBE FAUNITHBE FAUNITF1ME, FAUNITF11ME, FAUNITM11ME, FAUNITF6BE/U FAPAC(PC)F1DRV, FAUNITF8DR FAUNITF1BE, FAUNITF1ME, FAUNITF11BE, FAUNITF11ME, FAUNITM11BE, FAUNITM11ME, FAUNITM6BE, FAUNITMBE, FAUNITF8DR/M FAUNITF6DR, FAPAC()H, ECH()BEHA, ECH()SFHA FAPAC()F, ECH()BEFA, ECH()SFFA, ECH()BEHA, ECH()SFHA FAPAC()F, ECH()BEFA, ECH()SFFA, ECH()BEHA, ECH()SFHA FAUNITHBE FAPAC(PC)MD, FAPAC(PC)H5DR FAUNITF6BE/U PanelPCs I/O Bus MultiProgrammable O16 Bus Extension Lowcost Multifunction L series