Design Project. Necklace. Bouquet of Flowers

Transcription

1 Design Project Necklace Bouquet of Flowers

2 Design Project Necklace Bouquet of Flowers Wiring Stringing Swarovski crystals Article Product Group Article No. Amount Size Color Color Code Beads pcs. 8 mm Siam 208 Beads pcs. 12x8 mm Siam 208 Beads pcs. 4 mm Crystal Luminous Green 001 LUMG Beads pcs. 4 mm Indian Pink 289 Beads pcs. 4 mm Light Siam 227 Beads pcs. 4 mm Siam 208 crystal Pearls pcs. 8 mm Crystal Rose Gold Pearl crystal Pearls pcs. 10 mm Crystal Iridescent Green Pearl crystal Pearls pcs. 11.5x6 mm Crystal Iridescent Green Pearl crystal Pearls pcs. 6 mm Crystal Iridescent Green Pearl Pendants pcs. 11x5.5 mm Crystal Iridescent Green 001 IRIG Pendants pcs. 8 mm Crystal Iridescent Green 001 IRIG Supplies & Tools Supplies Chain, rose gold, 12 cm 2x Crimping bead, rose gold 11x Eye pin, rose gold Glue 12x Head pin, rose gold 30x Jump ring, rose gold, 4 mm 7x Jump ring, rose gold, 5 mm 1x Jump ring, rose gold, 8 mm 1x Lobster clasp 2x Split ring, rose gold, 6 mm 3x Synthetic flowers, green 1x Synthetic flowers, light rose 4x Synthetic flowers, pink 2x Synthetic flowers, purple 2x Synthetic flowers, red Tag chain, rose gold, 0.8 m Tiger tail, rose gold, 65 cm, 0.38 mm Tools Crimping pliers Flat nose pliers Round nose pliers Side cutter Beads pcs. 8 mm Crystal Golden Shadow 001 GSHA Level of design: INTERMEDIATE Have also a look at the text instructions at the last page! STEP 1 Repeat Step x8: Step 2 2/12

3 Step STEP 2 2 Step 2 Step 3 Step STEP 3 3 Repeat step x2 Repeat step x2 Repeat step x2 STEP 4 Step 4 Repeat step x4: Step 5 3/12

4 STEP 5 Repeat step 4: Repeat step x3: Step STEP 6 6 Repeat step x4: Step 7 4/12 Repeat step x2:

5 STEP 7 Step 7 Repeat step x4: Step 7 Repeat step x2: Step 8 STEP 8 Step Repeat 8 step x2: Glue Glue Repeat step x2 Step 8 Step 9 Glue Repeat step x2 Repeat step x2 Step STEP 9 9 6mm x1, 9mm x1, 10mm x1, 12mm x3, 19mm x2, 20mm x2, 22mm x1 26mm x3, 27mm x1, 28mm x1, 32mm x1, 33mm x1, 35mm x1, 36mm x1, 37mm x2, 39mm x2, 44mm x1, 48mm x1, 57mm x1, 64mm x1 6mm x1, 9mm x1, 10mm x1, 12mm x3, 19mm x2, 20mm x2, 22mm x1 26mm x3, 27mm x1, 28mm x1, 32mm x1, 33mm x1, 35mm x1, 36mm x1, 37mm x2, 39mm x2, 44mm x1, 48mm x1, 57mm x1, 64mm x1 5/12

6 A. 9 mm 12 mm 3/ B. C. D. E. 12 mm 32 mm 39 mm 22 mm 20 mm 19 mm 6/12

7 F. G. H. I. 35 mm 26 mm 57 mm 26 mm 37 mm J. K. L. M. 26 mm 36 mm 44 mm 39 mm 48 mm 10 mm 6 mm 7/12

8 N. O. P. Q. 19 mm 33 mm 37 mm 20 mm 64 mm 12 mm R. S. 27 mm 28 mm 8/12

9 STEP 10 Step cm /12

10 STEP 11 Step 11 10/12

11 STEP 12 Step /12

12 Design Project Necklace Bouquet of Flowers STEP 1: STEP 2: STEP 3: STEP 4: STEP 5: STEP 6: STEP 7: STEP 8: STEP 9: STEP 10: STEP 11: STEP 12: insert Swarovski Bead art mm Indian Pink onto a headpin and turn a loop at the end as shown. Use wire cutters to trim excess wire. Repeat this step 8 more times with the remaining 4 mm Swarovski Beads in Indian Pink, Siam and Light Siam. open the loop of an eye pin and insert one Indian Pink, one Siam and one Light Siam beaded headpin made in step 1. Close the loop to secure. Repeat this step two more times with the remaining beaded headpins (see illustration for details.) insert the green flower onto the eye pins created in step 2 and turn a loop at the end as shown. Repeat this step with the other two eye pins created in step 2. insert Swarovski Bead art mm Crystal Golden Shadow onto a headpin and then insert the pink flower onto it. Form a loop and wind it as shown in the illustrations. Twist this loop close to the outside of the flower. Repeat this step two more times with the remaining Swarovski Bead art mm Crystal Golden Shadow and then twice more with the Swarovski Crystal Pearl art mm Crystal Golden Shadow. You will use one pink flower and one light rose flower with the pearls. cut off the head of a head pin and insert it through Swarovski Crystal Pearl art mm Crystal Iridescent Green Pearl. Fold both the ends upwards in a way that the Swarovski Crystal Pearl lies in the middle (see illustration for details). Insert a purple flower through both ends of the headpin. Twist one of the ends to form a loop and then twist the other end over this. As in step 4 twist this loop close to the back of the flower. Repeat once to make another purple flower. Repeat two more times using the 8 mm Swarovski Bead art in Siam with the two red flowers. insert Swarovski Bead art x8 mm Siam onto an eye pin and twist the other end to a loop too. Repeat this step 4 more times with Swarovski Bead art mm Crystal Luminous Green. insert Swarovski Bead art x8mm Siam onto a head pin and twist the other end to a loop. Repeat this step two more times. cut an eye pin exactly to the size so that it fits into Swarovski Crystal Pearl art x6 mm Crystal Iridescent Green Pearl. Glue the eye pin into the Swarovski Crystal Pearl. Repeat this step two more times. cut chains to lengths as shown in the illustrations. Create the various beaded chain designs as shown in the illustrations labelled A-S. Open and close loops and jump rings wherever necessary. cut 65 cm long tiger tail. Insert eleven Swarovski Crystal Pearls art mm Crystal Iridescent Green Pearl onto it. Alternate one previously prepared chain with a Swarovski Crystal Pearl as depicted in the illustrations. Insert eleven more of the Crystal Pearls. Insert the tiger tail through a crimp bead, then through the split ring and back through the crimp bead and three of the Crystal Pearls. Crimp the crimping bead and cut off the extra tiger tail. Repeat this at the other end as well. attach an 8 mm jump ring to one of the ends using a 5 mm jump ring and a lobster clasp to the other end also using a 5 mm jump ring. Attach an extension chain with the 8 mm jump ring. open the loop of the extension chain and attach Swarovski Bead art x8 mm Siam on the headpin to it. 12/12