Entry & Interior Door Hardware. Technical Catalog Edition 1

Transcription

1 Entry & Interior Door Hardware Technical Catalog Edition 1

2 Coordinated designs and finishes available in 6 different series for all residential openings. Comfortable, ergonomic feel that operates with minimum motion. Cylindrical locks for interior and entry doors fit standard 2 1/8" bore preparation. Quick and easy installation due to pre-assembled components. Non-visible screws for most functions. Ten different finishes on solid brass. Resista finishes have a Limited LIfetime Finish Warranty. UL Listed / ANSI Rated handle sets available. NOTE: All Information is for reference only and subject to change without notice.

3 Contents Resista Finish Page 4 Handing Page 4 UL Listed / ANSI Grades Page 5 Athinai Series Page 6 München Series Page 12 New Orleans Series Page 18 Ródos Series Page 28 Toronto Series Page 38 Verona Series Page 48 Pocket Door Page 54 Deadbolt Page 55 Accessories Page 56 Function & Door Prep Page 64 Tools Page 74 Sales Tools Page 75 Glossary Page 78 Warranties Page 80 Terms & Conditions Page 81 3

4 Resista Finish Resista - The HOPPE Surface Guarantee All HOPPE brass handles are manufactured using the finest quality brass alloys. The surface of the handle is protected by a transparent enamel finish which offers strength, intensity and durability, as well as a smooth, blemish-free surface. It is important to remember to use water and a soft cloth to clean brass. Do not use brass cleaner, detergents or chemical cleansers as they may remove the protective coating. HOPPE s Resista program of finishes is available on selected solid brass handle sets and protects against tarnishing, peeling and cracking for a rich lustre throughout. All Resista finishes are indicated by an R after the handle color code and are covered with our Resista Finish Limited Lifetime Warranty which is explained on page 80. Handing Exterior LH Interior RH Door handing is always determined from the exterior. Inswing or outswing does not determine handing. Note regarding handed F102 Function Entry Lock Sets: Handing of sets is always viewed from the exterior. F102 Function Entry Lock Sets will contain an interior handle that is handed opposite of the set. 4 Call

5 HBL - UL Listed / ANSI Rated UL Listed / ANSI Rated Grading System Many of the hardware sets in the HBL product line are UL Listed / ANSI Rated. ANSI (American National Standards Institute) is a private, non-profit organization that administers and coordinates the voluntary standardization to develop and maintain performance standards for builders hardware. These standards are written descriptions and criteria that precisely define the appropriate operations, peformance characteristics, physical properties, test value, usage parameters, safety criteria, etc. of specific types of hardware. Within this standardization are different product grades which are defined by levels of performance which determine the quality and durability of locksets through a series of operational and security tests. The ANSI Rated Grading System indentifies three levels of performance with regard to residential security. Grade 3 is indicated for a basic level of performance; Grade 2 is intermediate; and the very highest level of peformance in residential security is an ANSI rating of Grade 1. The HBL product line has a series of handle sets which are rated ANSI Grade 2 for operation and ANSI Grade 1 for security. The HBL deadbolt is rated ANSI Grade 1 for security, which is the highest level in security. An upgraded portion of the HBL product line is also UL listed - 90 minute rated. This includes the HBL passage set (F75 function), entry lock set (F95 function) and entry lock set/grip handle (F102 function). All the UL Listed / ANSI rated HBL handle sets are designated as such on each page that applies. 5

6 HBL - Athinai Series Athinai M156/3939 Privacy Set Shown 21mm (0.83) 130mm (5.10) 65mm (2.56) 55mm (2.15) 21mm (0.83) 10mm (0.39) 118mm (4.65) Passage Set Shown 8mm (0.30) Resista Polished Brass/ Polished Chrome/ Description Backset Brass Brushed Brass Br. Stainless Steel (F77-R) (F77-R/F72-R) (F49-R/F69-R) Passage Set F75 Function M156/3939 Privacy Set F76 Function M156/3939S Satin Nickel (F42-R) Dummy Set Function M156/3939/3940 Pair Fixed Dummy M156/3939 Exterior Single Fixed M156/3940 Interior Single Fixed All Standard Sets, except Dummys, include both radius and square cornered faceplates and strikes. All Sets except Single Fixed Dummys are for 35mm (1.375) and 45mm (1.75) door thicknesses. Reference pages for additional door prep information. Passage Sets must be used in conjunction with a deadbolt to conform to an ANSI security rating. Reference page 55 for HBL deadbolts. 6 Call

7 HBL - Athinai Series Athinai M156/3939 UL Listed / ANSI Rated Passage Set Shown 21mm (0.83) 130mm (5.10) 65mm (2.56) 55mm (2.15) 21mm (0.83) 10mm (0.39) 118mm (4.65) Passage Set Shown 8mm (0.30) Description Backset Resista Polished Brass/ Polished Chrome/ Satin Nickel Brass Brushed Brass Br. Stainless Steel (F42-R) (F77-R) (F77-R/F72-R) (F49-R/F69-R) Passage Set F75 Function M156/ All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thicknesses. Reference page 65 for additional door prep information. Passage Sets must be used in conjunction with a deadbolt to conform to an ANSI security rating. Reference page 55 for HBL deadbolts. 7

8 HBL - Athinai Series Athinai M156/3950/3949/ mm (5.50) Entry Set Shown 78mm (3.07) 28mm (1.10) 78mm (3.07) 2 (10.63) 21mm (0.83) 2 (10.63) 21mm (0.83) 118mm (4.65) 130mm (5.10) 54mm (2.13) 54mm (2.13) 118mm (4.65) 130mm (5.10) Exterior Interior Description Backset Resista Polished Brass/ Polished Chrome/ Satin Nickel Brass Brushed Brass Br. Stainless Steel (F42-R) (F77-R) (F77-R/F72-R) (F49-R/F69-R) Entry Lock Set F95 Function M156/3950/3949/ All Standard Sets include both radius and square cornered faceplates and strikes. All Sets are for 45mm (1.75) door thickness. Reference page 68 for additional door prep information. 8 Call

9 HBL - Athinai Series Athinai M156/3950/3949/807 UL Listed / ANSI Rated 140mm (5.50) Entry Set Shown 78mm (3.07) 28mm (1.10) 78mm (3.07) 2 (10.63) 21mm (0.83) 2 (10.63) 21mm (0.83) 118mm (4.65) 130mm (5.10) 54mm (2.13) 54mm (2.13) 118mm (4.65) 130mm (5.10) Exterior Interior Description Backset Resista Polished Brass/ Polished Chrome/ Satin Nickel Brass Brushed Brass Br. Stainless Steel (F42-R) (F77-R) (F77-R/F72-R) (F49-R/F69-R) Entry Lock Set F95 Function M156/3950/3949/ All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. Reference page 69 for additional door prep information. 9

10 HBL - Athinai Series Athinai M5170/3951/3949/807/ mm (5.50) 78mm (3.07) 28mm (1.10) 78mm (3.07) Entry Set Shown 441mm (17.35) 190mm (7.48) 2 (10.63) 11mm (0.43) 5mm (0.20) 2 (10.63) 54mm (2.13) 21mm (0.83) 118mm (4.65) 130mm (5.10) 52mm (2.04) 57mm (2.23) Exterior Resista Polished Brass/ Polished Chrome/ Description Backset Brass Brushed Brass Br. Stainless Steel (F77-R) (F77-R/F72-R) (F49-R/F69-R) Entry Lock Set F102 Function Satin Nickel (F42-R) Interior M5170/3951/3949/807/ Dummy Set Function M5170/3951/3949/807/156 Pair Fixed Dummy All Standard Sets include both radius and square cornered faceplates and strikes, except Dummy Sets. All Sets are for 45mm (1.75) door thickness. Reference page 70 for additional door prep information. 10 Call

11 HBL - Athinai Series Athinai M5170/3951/3949/807/156 UL Listed / ANSI Rated 140 mm (5.50) 78mm (3.07) 28mm (1.10) 78mm (3.07) Entry Set Shown 441mm (17.35) 190mm (7.48) 2 (10.63) 11mm (0.43) 5mm (0.20) 2 (10.63) 54mm (2.13) 21mm (0.83) 118mm (4.65) 130mm (5.10) 52mm (2.04) 57mm (2.23) Exterior Resista Polished Brass/ Polished Chrome/ Description Backset Brass Brushed Brass Br. Stainless Steel (F77-R) (F77-R/F72-R) (F49-R/F69-R) Entry Lock Set F102 Function Satin Nickel (F42-R) Interior M5170/3951/3949/807/ All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. Reference page 71 for additional door prep information. 11

12 HBL - München Series München M112PL/3939 Privacy Set RH Shown 33mm (1.29) 126mm (4.96) 65mm (2.56) 59mm (2.34) 26mm (1.01) 10mm (0.39) 114mm (4.49) Passage Set LH Shown 8mm (0.30) Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Passage Set F75 Function RH M112PL/ LH Privacy Set F76 Function RH M112PL/3939S LH Dummy Set Function M112PL/3939/3940 Pair Fixed Dummy M112PL/3939 RH Exterior Single Fixed LH M112PL/3940 RH Interior Single Fixed LH All Standard sets, except Dummys, include both radius and square cornered faceplates and strikes. All sets except Single Fixed Dummys are for 35mm (1.375) and 45mm (1.75) door thicknesses. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference pages for additional door prep information. Passage Sets must be used in conjunction with a deadbolt to conform to an ANSI security rating. Reference page 55 for HBL deadbolts. 12 Call

13 HBL - München Series München M112PL/3939 UL Listed / ANSI Rated Passage Set RH Shown 33mm (1.29) 126mm (4.96) 65mm (2.56) 59mm (2.34) 26mm (1.01) 10mm (0.39) 114mm (4.49) Passage Set LH Shown 8mm (0.30) Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Passage Set F75 Function RH M112PL/ LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All sets are for 45mm (1.75) door thicknesses. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 65 for additional door prep information. Passage Sets must be used in conjunction with a deadbolt to conform to an ANSI security rating. Reference page 55 for HBL deadbolts. 13

14 HBL - München Series München M112PL/3960/3959/807 2 (10.63) 33mm (1.29) 140mm (5.50) Entry Set LH Shown (2.76) 28mm (1.10) (2.76) 2 (10.63) 33mm (1.29) 114mm (4.49) 126mm (4.96) 59mm (2.33) 59mm (2.30) 114mm (4.49) 126mm (4.95) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F95 Function M112PL/3960/3959/807 RH LH All Standard Sets include both radius and square cornered faceplates and strikes. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 68 for additional door prep information. 14 Call

15 HBL - München Series München M112PL/3960/3959/807 UL Listed / ANSI Rated 2 (10.63) 33mm (1.29) 140mm (5.50) Entry Set LH Shown (2.76) 28mm (1.10) (2.76) 2 (10.63) 33mm (1.29) 114mm (4.49) 126mm (4.96) 59mm (2.33) 59mm (2.30) 114mm (4.49) 126mm (4.95) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F95 Function M112PL/3960/3959/807 RH LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 69 for additional door prep information. 15

16 HBL - München Series München M5171/3961/3959/807/112PL 140mm (5.50) (2.76) 28mm (1.10) (2.76) Entry Set LH Shown 441mm (17.35) 190mm (7.48) 2 (10.63) 2 (10.63) 33mm (1.29) 59mm (2.30) 114mm (4.49) 11mm (0.43) 126mm (4.95) 52mm (2.04) 59mm (2.33) 5mm (0.20) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F102 Function M5171/3961/3959/807/112PL RH LH Dummy Set Function M5171/3961/3959/807/112PL RH Pair Fixed Dummy LH All Standard Sets include a square cornered faceplate and strike, except Dummy Sets. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 70 for additional door prep information. Handing of sets is always viewed from the exterior. F102 Function Entry Lock Sets will contain an interior handle that is handed opposite of the set. 16 Call

17 HBL - München Series München M5171/3961/3959/807/112PL UL Listed / ANSI Rated 140mm (5.50) (2.76) 28mm (1.10) (2.76) Entry Set LH Shown 441mm (17.35) 190mm (7.48) 2 (10.63) 2 (10.63) 33mm (1.29) 59mm (2.30) 114mm (4.49) 11mm (0.43) 126mm (4.95) 52mm (2.04) 59mm (2.33) 5mm (0.20) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F102 Function RH M5171/3961/3959/807/112PL LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 71 for additional door prep information. Handing of sets is always viewed from the exterior. F102 Function Entry Lock Sets will contain an interior handle that is handed opposite of the set. 17

18 HBL - New Orleans Series New Orleans M1610/3939 Privacy Set RH Shown 27mm (1.06) 117mm (4.62) 65mm (2.56) (2.37) 27mm (1.08) 10mm (0.39) 105mm (4.13) Passage Set LH Shown 8mm (0.30) Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Passage Set F75 Function M1610/3939 RH LH Privacy Set F76 Function M1610/3939S Dummy Set Function M1610/3939/3940 Pair Fixed Dummy 18 Call RH LH M1610/3939 RH Exterior Single Fixed LH M1610/3040 RH Interior Single Fixed LH All Standard Sets, except Dummys, include both radius and square cornered faceplates and strikes. All Sets except Single Fixed Dummys are for 35mm (1.375) and 45mm (1.75) door thicknesses. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference pages for additional door prep information. Passage Sets must be used in conjunction with a deadbolt to conform to an ANSI security rating. Reference page 55 for HBL deadbolts.

19 HBL - New Orleans Series New Orleans M1610/3939 UL Listed / ANSI Rated Passage Set RH Shown 27mm (1.06) 117mm (4.62) 65mm (2.56) (2.37) 27mm (1.08) 10mm (0.39) 105mm (4.13) Passage Set LH Shown 8mm (0.30) Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Passage Set F75 Function M1610/3939 RH LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thicknesses. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 65 for additional door prep information. Passage Sets must be used in conjunction with a deadbolt to conform to an ANSI security rating. Reference page 55 for HBL deadbolts. 19

20 HBL - New Orleans Series New Orleans M1610/3950/3949/ mm (3.07) 28mm (1.10) 78mm (3.07) 2 (10.63) 2 (10.63) 140mm (5.50) Entry Set LH Shown 105mm (4.13) 117mm (4.61) 58mm (2.30) 59mm (2.33) 105mm (4.13) 117mm (4.61) 27mm (1.06) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F95 Function M1610/3950/3949/807 RH LH All Standard Sets include both radius and square cornered faceplates and strikes. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 68 for additional door prep information. 20 Call

21 HBL - New Orleans Series New Orleans M1610/3950/3949/807 UL Listed / ANSI Rated 78 mm (3.07) 28mm (1.10) 78mm (3.07) 2 (10.63) 2 (10.63) 140mm (5.50) Entry Set LH Shown 105mm (4.13) 117mm (4.61) 58mm (2.30) 59mm (2.33) 105mm (4.13) 117mm (4.61) 27mm (1.06) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F95 Function M1610/3950/3949/807 RH LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 69 for additional door prep information. 21

22 HBL - New Orleans Series New Orleans M1610/3960/3959/ mm (5.50) Entry Set LH Shown (2.76) 28mm (1.10) (2.76) 2 (10.63) 16mm (0.61) 2 (10.63) 105mm (4.13) 117mm (4.61) 58mm (2.30) 59 mm (2.33) 105mm (4.13) 117mm (4.61) 27mm (1.06) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F95 Function M1610/3960/3959/807 RH LH All Standard Sets include both radius and square cornered faceplates and strikes. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 68 for additional door prep information. 22 Call

23 HBL - New Orleans Series New Orleans M1610/3960/3959/807 UL Listed / ANSI Rated 140mm (5.50) Entry Set LH Shown (2.76) 28mm (1.10) (2.76) 2 (10.63) 16mm (0.61) 2 (10.63) 105mm (4.13) 117mm (4.61) 58mm (2.30) 59 mm (2.33) 105mm (4.13) 117mm (4.61) 27mm (1.06) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F95 Function M1610/3960/3959/807 RH LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 69 for additional door prep information. 23

24 HBL - New Orleans Series New Orleans M5170/3951/3949/807/ mm (5.50) 78mm (3.07) 28mm (1.10) 78mm (3.07) Entry Set LH Shown 441mm (17.35) 190 mm (7.48) 2 (10.63) 11mm (0.43) 5mm (0.20) 2 (10.63) 59mm (2.33) 105mm (4.13) 117mm (4.61) 27mm (1.06) 52mm (2.04) 57mm (2.23) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F102 Function M5170/3951/3949/807/1610 RH LH Dummy Set Function M5170/3951/3949/807/1610 RH Pair Fixed Dummy LH All Standard Sets include both radius and square cornered faceplates and strikes. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 70 for additional door prep information. Handing of sets is always viewed from the exterior. F102 Function Entry Lock Sets will contain an interior handle that is handed opposite of the set. 24 Call

25 HBL - New Orleans Series New Orleans M5170/3951/3949/807/1610 UL Listed / ANSI Rated 140mm (5.50) 78mm (3.07) 28mm (1.10) 78mm (3.07) Entry Set LH Shown 441mm (17.35) 190 mm (7.48) 2 (10.63) 11mm (0.43) 5mm (0.20) 2 (10.63) 59mm (2.33) 105mm (4.13) 117mm (4.61) 27mm (1.06) 52mm (2.04) 57mm (2.23) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F102 Function M5170/3951/3949/807/1610 RH LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 71 for additional door prep information. Handing of sets is always viewed from the exterior. F102 Function Entry Lock Sets will contain an interior handle that is handed opposite of the set. 25

26 HBL - New Orleans Series New Orleans M5171/3961/3959/807/ mm (5.50) (2.76) Entry Set LH Shown 441mm (17.35) 52mm (2.04) 190mm (7.48) 2 (10.63) 11mm (0.43) 5mm (0.20) 59mm (2.33) 28mm (1.10) 2 (10.63) 59mm (2.33) (2.76) 105mm (4.13) 117mm (4.61) 27mm (1.06) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F102 Function M5171/3961/3959/807/1610 RH LH Dummy Set Function M5171/3961/3959/807/1610 RH Pair Fixed Dummy LH All Standard Sets include both radius and square cornered faceplates and strikes. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 70 for additional door prep information. Handing of sets is always viewed from the exterior. F102 Function Entry Lock Sets will contain an interior handle that is handed opposite of the set. 26 Call

27 HBL - New Orleans Series New Orleans M1571/3961/3959/807/1610 UL Listed / ANSI Rated 140mm (5.50) (2.76) Entry Set LH Shown 441mm (17.35) 52mm (2.04) 190mm (7.48) 2 (10.63) 11mm (0.43) 5mm (0.20) 59mm (2.33) 28mm (1.10) 2 (10.63) 59mm (2.33) (2.76) 105mm (4.13) 117mm (4.61) 27mm (1.06) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F102 Function RH M5171/3961/3959/807/ LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 71 for additional door prep information. Handing of sets is always viewed from the exterior. F102 Function Entry Lock Sets will contain an interior handle that is handed opposite of the set. 27

28 HBL - Ródos Series Ródos M1603/3939 Privacy Set RH Shown 40mm (1.57) 131mm (5.16) 65mm (2.56) 64mm (2.51) 28mm (1.11) 10mm (0.38) 119mm (4.69) Passage Set LH Shown 8mm (0.30) Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Passage Set F75 Function M1603/3939 RH LH Privacy Set F76 Function M1603/3939S RH LH Dummy Set Function M1603/3939/3940 Pair Fixed Dummy M1603/3939 RH Exterior Single Fixed LH M1603/3940 Interior Single Fixed 28 Call RH LH All Standard Sets, except Dummys, include both radius and square cornered faceplates and strikes. All Sets except Single Fixed Dummys are for 35mm (1.375) and 45mm (1.75) door thicknesses. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference pages for additional door prep information. Passage Sets must be used in conjunction with a deadbolt to conform to an ANSI security rating. Reference page 55 for HBL deadbolts.

29 HBL - Ródos Series Ródos M1603/3939 UL Listed / ANSI Rated Passage Set RH Shown 40mm (1.57) 131mm (5.16) 65mm (2.56) 64mm (2.51) 28mm (1.11) 10mm (0.38) 119mm (4.69) Passage Set LH Shown 8mm (0.30) Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Passage Set F75 Function M1603/3939 RH LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thicknesses. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 65 for additional door prep information. Passage Sets must be used in conjunction with a deadbolt to conform to an ANSI security rating. Reference page 55 for HBL deadbolts. 29

30 HBL - Ródos Series Ródos M1603/3950/3949/ mm (5.50) Entry Set LH Shown 78mm (3.07) 28mm (1.10) 78mm (3.07) 2 (10.63) 40mm (1.57) 2 (10.63) 40mm (1.57) 119mm (4.69) 62mm (2.48) 63mm (2.48) 119mm (4.69) 131mm (5.16) 131mm (5.16) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F95 Function M1603/3950/3949/807 RH LH All Standard Sets include both radius and square cornered faceplates and strikes. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 68 for additional door prep information. 30 Call

31 HBL - Ródos Series Ródos M1603/3950/3949/807 UL Listed / ANSI Rated 140mm (5.50) Entry Set LH Shown 78mm (3.07) 28mm (1.10) 78mm (3.07) 2 (10.63) 40mm (1.57) 2 (10.63) 40mm (1.57) 119mm (4.69) 62mm (2.48) 63mm (2.48) 119mm (4.69) 131mm (5.16) 131mm (5.16) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F95 Function M1603/3950/3949/807 RH LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 69 for additional door prep information. 31

32 HBL - Ródos Series Ródos M1603/3960/3959/ mm (5.50) Entry Set LH Shown (2.76) 28mm (1.10) (2.76) 2 (10.63) 40mm (1.57) 2 (10.63) 40mm (1.59) 119mm (4.69) 131mm (5.16) Exterior 62mm (2.48) 63mm (2.48) Interior 131mm (5.16) Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F95 Function M1603/3960/3959/807 RH LH All Standard Sets include both radius and square cornered faceplates and strikes. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 68 for additional door prep information. 32 Call

33 HBL - Ródos Series Ródos M1603/3960/3959/807 UL Listed / ANSI Rated 140mm (5.50) Entry Set LH Shown (2.76) 28mm (1.10) (2.76) 2 (10.63) 40mm (1.57) 2 (10.63) 40mm (1.59) 119mm (4.69) 131mm (5.16) Exterior 62mm (2.48) 63mm (2.48) Interior 131mm (5.16) Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F95 Function M1603/3960/3959/807 RH LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 69 for additional door prep information. 33

34 HBL - Ródos Series Ródos M5170/3951/3949/807/ mm (5.50) 78mm (3.07) 28mm (1.10) 78mm (3.07) Entry Set LH Shown 441mm (17.35) 190mm (7.48) 2 (10.63) 5mm (0.20) 11mm (0.43) 63mm (2.48) 2 (10.63) 119mm (4.69) 40mm (1.57) 131mm (5.16) 52mm (2.04) 57mm (2.23) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F102 Function M5170/3951/3949/807/1603 RH LH Dummy Set Function M5170/3951/3949/807/1603 RH Pair Fixed Dummy LH All Standard Sets include both radius and square cornered faceplates and strikes. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 70 for additional door prep information. Handing of sets is always viewed from the exterior. F102 Function Entry Lock Sets will contain an interior handle that is handed opposite of the set. 34 Call

35 HBL - Ródos Series Ródos M5170/3951/3949/807/1603 UL Listed / ANSI Rated 140mm (5.50) 78mm (3.07) 28mm (1.10) 78mm (3.07) Entry Set LH Shown 441mm (17.35) 190mm (7.48) 2 (10.63) 5mm (0.20) 11mm (0.43) 63mm (2.48) 2 (10.63) 119mm (4.69) 40mm (1.57) 131mm (5.16) 52mm (2.04) 57mm (2.23) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F102 Function M5170/3951/3949/807/1603 RH LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 71 for additional door prep information. Handing of sets is always viewed from the exterior. F102 Function Entry Lock Sets will contain an interior handle that is handed opposite of the set. 35

36 HBL - Ródos Series Ródos M5171/3961/3959/807/ mm (5.50) (2.76) 28mm (1.10) (2.76) Entry Set LH Shown 441mm (17.35) 190mm (7.48) 2 (10.63) 11mm (0.43) 2 (10.63) 63mm (2.48) 40mm (1.57) 119mm (4.69) 131mm (5.16) 52mm (2.04) 59mm (2.33) 5mm (0.20) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F102 Function M5171/3961/3959/807/1603 RH LH Dummy Set Function M5171/3961/3959/807/1603 RH Pair Fixed Dummy LH All Standard Sets include both radius and square cornered faceplates and strikes. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 70 for additional door prep information. Handing of sets is always viewed from the exterior. F102 Function Entry Lock Sets will contain an interior handle that is handed opposite of the set. 36 Call

37 HBL - Ródos Series Ródos M5171/3961/3959/807/1603 UL Listed / ANSI Rated 140mm (5.50) (2.76) 28mm (1.10) (2.76) Entry Set LH Shown 441mm (17.35) 190mm (7.48) 2 (10.63) 11mm (0.43) 2 (10.63) 63mm (2.48) 40mm (1.57) 119mm (4.69) 131mm (5.16) 52mm (2.04) 59mm (2.33) 5mm (0.20) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F102 Function M5171/3961/3959/807/1603 RH LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 71 for additional door prep information. Handing of sets is always viewed from the exterior. F102 Function Entry Lock Sets will contain an interior handle that is handed opposite of the set. 37

38 HBL - Toronto Series Toronto M1020/3939 Privacy Set RH Shown 32mm (1.26) 129mm (5.08) 65mm (2.56) 51mm (2.01) 18mm (0.71) 10mm (0.39) 114mm (4.49) Passage Set LH Shown 8mm (0.30) Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Passage Set F75 Function M1020/3939 RH LH Privacy Set F76 Function M1020/3939S RH LH Dummy Set Function M1020/3939/3940 Pair Fixed Dummy M1020/3939 RH Exterior Single Fixed LH M1020/3940 RH Interior Single Fixed LH All Standard Sets, except Dummys, include both radius and square cornered faceplates and strikes. All Sets except Single Fixed Dummys are for 35mm (1.375) and 45mm (1.75) door thicknesses. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference pages for additional door prep information. Passage Sets must be used in conjunction with a deadbolt to conform to an ANSI security rating. Reference page 55 for HBL deadbolts. 38 Call

39 HBL - Toronto Series Toronto M1020/3939 UL Listed / ANSI Rated Passage Set RH Shown 32mm (1.26) 129mm (5.08) 65mm (2.56) 51mm (2.01) 18mm (0.71) 10mm (0.39) 114mm (4.49) Passage Set LH Shown 8mm (0.30) Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Passage Set F75 Function M1020/3939 RH LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thicknesses. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 65 for additional door prep information. Passage Sets must be used in conjunction with a deadbolt to conform to an ANSI security rating. Reference page 55 for HBL deadbolts. 39

40 HBL - Toronto Series Toronto M1020/3950/3949/ mm (5.51) Entry Set LH Shown 28mm (1.10) 78mm (3.07) 2 (10.63) 2 (10.63) 114mm (4.49) 129mm (5.08) 52mm (2.05) 52mm (2.05) 114mm (4.49) 129mm (5.08) 32mm (1.26) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F95 Function RH M1020/3950/3949/ LH All Standard Sets include both radius and square cornered faceplates and strikes. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 68 for additional door prep information. 40 Call

41 HBL - Toronto Series Toronto M1020/3950/3949/807 UL Listed / ANSI Rated 140mm (5.51) Entry Set LH Shown 28mm (1.10) 78mm (3.07) 2 (10.63) 2 (10.63) 114mm (4.49) 129mm (5.08) 52mm (2.05) 52mm (2.05) 114mm (4.49) 129mm (5.08) 32mm (1.26) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F95 Function M1020/3950/3949/807 RH LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 69 for additional door prep information. 41

42 HBL - Toronto Series Toronto M1020/3960/3959/ mm (5.51) Entry Set LH Shown (2.76) 28mm (1.10) (2.76) 2 (10.63) 2 (10.63) 114mm (4.49) 129mm (5.08) 52mm (2.05) 52mm (2.05) 114mm (4.49) 129mm (5.08) 32mm (1.26) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F95 Function M1020/3960/3959/807 RH LH All Standard Sets include both radius and square cornered faceplates and strikes. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 68 for additional door prep information. 42 Call

43 HBL - Toronto Series Toronto M1020/3960/3959/807 UL Listed / ANSI Rated 140mm (5.51) Entry Set LH Shown (2.76) 28mm (1.10) (2.76) 2 (10.63) 2 (10.63) 114mm (4.49) 129mm (5.08) 52mm (2.05) 52mm (2.05) 114mm (4.49) 129mm (5.08) 32mm (1.26) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F95 Function RH M1020/3960/3959/ LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 69 for additional door prep information. 43

44 140mm (5.50) HBL - Toronto Series Toronto M5170/3951/3949/807/ mm (3.07) 28mm (1.10) 78mm (3.07) Entry Set LH Shown 441mm (17.35) 190mm (7.48) 2 (10.63) 11mm (0.43) 5mm (0.20) 2 (10.63) 114mm (4.49) 129mm (5.08) 32mm (1.26) 52mm (2.04) 57mm (2.24) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F102 Function M5170/3951/3949/807/1020 RH LH Dummy Set Function M5170/3951/3949/807/1020 RH Pair Fixed Dummy LH All Standard Sets include both radius and square cornered faceplates and strikes. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 70 for additional door prep information. Handing of sets is always viewed from the exterior. F102 Function Entry Lock Sets will contain an interior handle that is handed opposite of the set. 44 Call

45 140mm (5.50) HBL - Toronto Series Toronto M5170/3951/3949/807/1020 UL Listed / ANSI Rated 78mm (3.07) 28mm (1.10) 78mm (3.07) Entry Set LH Shown 441mm (17.35) 190mm (7.48) 2 (10.63) 11mm (0.43) 5mm (0.20) 2 (10.63) 114mm (4.49) 129mm (5.08) 32mm (1.26) 52mm (2.04) 57mm (2.24) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F102 Function RH M5170/3951/3949/807/ LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 71 for additional door prep information. Handing of sets is always viewed from the exterior. F102 Function Entry Lock Sets will contain an interior handle that is handed opposite of the set. 45

46 140mm (5.50) HBL - Toronto Series Toronto M5171/3961/3959/807/1020 (2.76) 28mm (1.10) (2.76) Entry Set LH Shown 441mm (17.35) 190mm (7.48) 2 (10.63) 11mm (0.43) 5mm (0.20) 2 (10.63) 114mm (4.49) 129mm (5.08) 32mm (1.26) 52mm (2.04) 59mm (2.33) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F102 Function M5171/3961/3959/807/1020 Dummy Set Function 46 Call RH LH M5171/3961/3959/807/1020 RH Pair Fixed Dummy LH All Standard Sets include both radius and square cornered faceplates and strikes. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 70 for additional door prep information. Handing of sets is always viewed from the exterior. F102 Function Entry Lock Sets will contain an interior handle that is handed opposite of the set.

47 140mm (5.50) HBL - Toronto Series Toronto M5171/3961/3959/807/1020 UL Listed / ANSI Rated (2.76) 28mm (1.10) (2.76) Entry Set LH Shown 441mm (17.35) 190mm (7.48) 2 (10.63) 11mm (0.43) 5mm (0.20) 2 (10.63) 114mm (4.49) 129mm (5.08) 32mm (1.26) 52mm (2.04) 59mm (2.33) Exterior Interior Description Handing Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F102 Function RH M5171/3961/3959/807/ LH All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4. Reference page 71 for additional door prep information. Handing of sets is always viewed from the exterior. F102 Function Entry Lock Sets will contain an interior handle that is handed opposite of the set. 47

48 HBL - Verona Series Verona M151/3939 Privacy Set Shown 21mm (0.83) 124mm (4.90) 112mm (4.41) 54mm (2.15) 21mm (0.83) Passage Set Shown 8mm (0.30) Description Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Passage Set F75 Function M151/3939 Privacy Set F76 Function M151/3939S Dummy Set Function M151/3939/3940 Pair Fixed Dummy M151/3939 Exterior Single Fixed M151/3940 Interior Single Fixed All Standard Sets, except Dummys, include both radius and square cornered faceplates and strikes. All Sets except Single Fixed Dummys are for 35mm (1.375) and 45mm (1.75) door thicknesses. Reference pages for additional door prep information. Passage Sets must be used in conjunction with a deadbolt to conform to an ANSI security rating. Reference page 55 for HBL deadbolts. 48 Call

49 HBL - Verona Series Verona M151/3939 UL Listed / ANSI Rated Passage Set Shown 21mm (0.83) 124mm (4.90) 54mm (2.15) 21mm (0.83) 112mm (4.41) Passage Set Shown 8mm (0.30) Description Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Passage Set F75 Function M151/ All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thicknesses. Reference page 65 for additional door prep information. Passage Sets must be used in conjunction with a deadbolt to conform to an ANSI security rating. Reference page 55 for HBL deadbolts. 49

50 HBL - Verona Series Verona M151/3950/3949/ mm (5.50) Entry Set Shown 78mm (3.07) 28mm (1.10) 78mm (3.07) 2 (10.63) 21mm (0.83) 2 (10.63) 21mm (0.83) 112mm (4.41) 124mm (4.89) 53mm (2.09) 54mm (2.13) 112mm (4.41) 124mm (4.89) Exterior Interior Description Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F95 Function M151/3950/3949/ All Standard Sets include both radius and square cornered faceplates and strikes. All Sets are for 45mm (1.75) door thickness. Reference page 68 for additional door prep information. 50 Call

51 HBL - Verona Series Verona M151/3950/3949/807 UL Listed / ANSI Rated 140mm (5.50) Entry Set Shown 78mm (3.07) 28mm (1.10) 78mm (3.07) 2 (10.63) 21mm (0.83) 2 (10.63) 21mm (0.83) 112mm (4.41) 124mm (4.89) 53mm (2.09) 54mm (2.13) 112mm (4.41) 124mm (4.89) Exterior Interior Description Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F95 Function M151/3950/3949/ All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. Reference page 69 for additional door prep information. 51

52 HBL - Verona Series Verona M5170/3951/3949/807/ mm (5.50) 78mm (3.07) 28mm (1.10) 78mm (3.07) Entry Set Shown 441mm (17.35) 190mm (7.48) 2 (10.63) 11mm (0.43) 5mm (0.20) 2 (10.63) 54mm (2.13) 112mm (4.41) 124mm (4.89) 21mm (0.83) 52mm (2.04) 57mm (2.23) Exterior Interior Description Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F102 Function M5170/3951/3949/807/ Dummy Set Function M5170/3951/3949/807/151 Pair Fixed Dummy All Standard Sets include both radius and square cornered faceplates and strikes, except Dummy Sets. All Sets are for 45mm (1.75) door thickness. Reference page 70 for additional door prep information. 52 Call

53 HBL - Verona Series Verona M5170/3951/3949/807/151 UL Listed / ANSI Rated 140mm (5.50) 78mm (3.07) 28mm (1.10) 78mm (3.07) Entry Set Shown 441mm (17.35) 190mm (7.48) 2 (10.63) 11mm (0.43) 5mm (0.20) 2 (10.63) 54mm (2.13) 112mm (4.41) 124mm (4.89) 21mm (0.83) 52mm (2.04) 57mm (2.23) Exterior Interior Description Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Entry Lock Set F102 Function M5170/3951/3949/807/ All UL Listed / ANSI Rated Sets include a square cornered faceplate and strike. All Sets are for 45mm (1.75) door thickness. Reference page 71 for additional door prep information. 53

54 HBL Pocket Door Pocket Door M492 Privacy shown 16mm (.63) 14mm (.55) Door Edge Pull Strike Lockcase Exterior Finger Grip with Emergency Release Interior Finger Grip with Thumb Turn 64mm (2.52) 18mm (.71) 28mm (1.10) 2mm (.08) 82mm (3.23) 1 (6.30) Door Prep 2mm (.71) 68mm (2.68) 100mm (3.93) 61mm (2.40) 140mm (5.51) 50mm (1.97) 30mm (1.18) 16mm (.63) 30mm (1.18) 19mm (.75) 2mm (.08) 22mm (.87) 25mm (.98) (2.36) 3.0mm (.12) 3.0mm (.12) 48mm (1.89) 48mm (1.89) (2.36) 11mm (.43) 11mm (.43) Description Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Passage Finger Grips (2) & Pull 50mm M492 (1.97) Privacy Finger Grips (2), Pull, Lockcase & Strike 50mm M492 (1.97) Passage Set Finger Grips do not include emergency release or thumb turn. Privacy set for 35mm (1.375) and 45mm (1.75) door thicknesses. Reference pages for additional door prep information. 54 Call

55 HBL Deadbolt Deadbolt Deadbolt E0152 Trim Ring 45mm (1 3/4") door thickness Trim Ring not required 35mm (1 3/8") door thickness Trim Ring required Exterior Interior Trim Ring 65mm (2.55) 10mm (0.39) 65mm (2.56) (2.77) 15mm (0.58) 28mm (1.09) 5mm (0.20) Standard Description Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Deadbolt Function E0152 M452/3940S/ ) UL Listed / ANSI Rated Description Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber Deadbolt Function E0152 M452/3940S/ All Sets for 45mm (1.75) door thickness. Add Trim Ring for 35mm (1.375) door thickness. Reference pages for additional door prep information. Trim Ring for Deadbolt Description Backset Brass Brass Chrome Chrome Brass Black Nickel Nickel Umber M

56 HBL Accessories Brass Full Lip Latch Strike 14mm (9/16) 1.20mm (3/64) 23.80mm (15/16) 12mm (1/2) 1.20mm (3/64) 41mm (1 5/8) 57mm (2 1/4) 57mm (2 1/4) 35mm (1 3/8) Full Lip Latch Strike Dustcap For Latch Strike Full Lip Latch Strike Packs Include both Radius and Square Cornered Strikes, Screws and Dustcap Door Thickness Resista Polished Brass/ Antique Brushed Polished Polished Chrome/ Oil-Rubbed Matte Satin Antique Rustic Brass Brushed Brass Brass Chrome Chrome Br. Stainless Steel Brass Black Nickel Nickel Umber (F77-R) (F77-R/F72-R) (F73) (F41-R) (F49-R) (F49-R/F69-R) (F79) (F9714) (F42-R) (F44-R) (F8709) 35 & 45mm (1.375 & 1.75) Brass Full Lip Latch Strikes do not meet UL - Listed requirements. Please reference page 58 for UL Listed handle set accessories. Brass T-Latch Strike 7.37mm (11/16) 28mm (1 1/16) 54mm (2 1/8) (2 3/4) 1.20mm (3/64) 28mm (1 1/8) 4.75mm (3/16) 23.80mm (15/16) 12mm (1/2) 1.20mm (3/64) 54mm (2 1/8) (2 3/4) 57mm (2 1/4) 28.80mm (1 1/8) T-Latch Strike Underplate For T-Latch Strike Dustcap For Latch Strike T-Latch Strike Packs Include both Radius and Square Cornered Strikes, Underplate, Screws and Dustcap Door Thickness 35 & 45mm (1.375 & 1.75) Resista Polished Brass/ Antique Brushed Polished Polished Chrome/ Oil-Rubbed Matte Satin Antique Rustic Brass Brushed Brass Brass Chrome Chrome Br. Stainless Steel Brass Black Nickel Nickel Umber (F77-R) (F77-R/F72-R) (F73) (F41-R) (F49-R) (F49-R/F69-R) (F79) (F9714) (F42-R) (F44-R) (F8709) Call

57 HBL Accessories Stainless Steel Full Lip Latch Strike 20.6mm (5/64) 57mm (2 1/4) 41mm (1 5/8) 2.28mm (3/32) Full Lip Latch Strike Packs Include Square Cornered Strikes and Screws Door Thickness 35mm (1.375) 45mm (1.75) 57mm (2.25) Resista Polished Brass/ Antique Brushed Polished Polished Chrome/ Oil-Rubbed Matte Satin Antique Rustic Brass Brushed Brass Brass Chrome Chrome Br. Stainless Steel Brass Black Nickel Nickel Umber (F77-R) (F77-R/F72-R) (F73) (F41-R) (F49-R) (F49-R/F69-R) (F79) (F9714) (F42-R) (F44-R) (F8709) Latch Faceplate 25mm ( 1 ) 1.25mm (3/64) 57mm (2 1/4) 41mm (1 5/8) 37mm (29/64) Latch Faceplate Pack Includes both Radius and Square Cornered Faceplates and Screws Resista Polished Brass/ Antique Brushed Polished Polished Chrome/ Oil-Rubbed Matte Satin Antique Rustic Brass Brushed Brass Brass Chrome Chrome Br. Stainless Steel Brass Black Nickel Nickel Umber (F77-R) (F77-R/F72-R) (F73) (F41-R) (F49-R) (F49-R/F69-R) (F79) (F9714) (F42-R) (F44-R) (F8709) Standard Latch Faceplates do not meet UL Listed requirements. Please reference page 58 for UL Listed handle set accessories. 57

58 HBL Accessories Tubular Latch Tubular Latch Description Backset Brass Finish Nickel Finish Passage F75 Function Privacy F76 Function Standard Tubular Latches do not meet UL Listed requiremnts. Please see below for UL Listed handles set accessories. UL Listed / ANSI Rated UL Listed Latch Conversion / Replacement Kit Door Resista Polished Brass/ Antique Brushed Polished Pol. Chrome/ Oil-Rubbed Matte Satin Antique Rustic Description Thickness Backset Brass Brushed Brass Brass Chrome Chrome Br. Stain. Steel Brass Black Nickel Nickel Umber (F77-R) (F77-R/F72-R) (F73) (F41-R) (F49-R) (F49-R/F69-R) (F79) (F9714) (F42-R) (F44-R) (F8709) 35mm (1.375) F75 Function F95 Function F102 Function 45mm (1.75) mm (2.25) mm (1.375) Privacy Set 45mm F76 Function (1.75) mm (2.25) UL Listed Latch Conversion / Replacement Kit transforms a standard handle set into a UL listed / ANSI Rated handle set or provides replacement parts for an existing UL Listed / ANSI Rated handle set. The kit includes a UL Listed latch, UL Listed latch faceplate, stainless steel strike plate and necessary screws. All these components must be used together for the handle set to be UL Listed / ANSI Rated. 58 Call

59 HBL Accessories Deadbolt Faceplate 25mm ( 1 ) 1.25mm (3/64) 57mm (2 1/4) 41mm (1 5/8) Deadbolt Faceplate Pack Includes both Radius and Square Cornered Faceplates and Screws Resista Polished Brass/ Antique Brushed Polished Polished Chrome/ Oil-Rubbed Matte Satin Antique Rustic Brass Brushed Brass Brass Chrome Chrome Br. Stainless Steel Brass Black Nickel Nickel Umber (F77-R) (F77-R/F72-R) (F73) (F41-R) (F49-R) (F49-R/F69-R) (F79) (F9714) (F42-R) (F44-R) (F8709) UL Listed / ANSI Rated Deadbolt Faceplate Pack Includes Square Cornered Faceplate and Screws Resista Polished Brass/ Antique Brushed Polished Polished Chrome/ Oil-Rubbed Matte Satin Antique Rustic Brass Brushed Brass Brass Chrome Chrome Br. Stainless Steel Brass Black Nickel Nickel Umber (F77-R) (F77-R/F72-R) (F73) (F41-R) (F49-R) (F49-R/F69-R) (F79) (F9714) (F42-R) (F44-R) (F8709) Tubular Deadbolt UL Listed / ANSI Rated Tubular Deadbolt Backset Brass Finish Nickel Finish Tubular Deadbolt Backset Brass Finish Nickel Finish

60 HBL Accessories Deadbolt Strike 29mm (1 1/8) 1.40mm (1/16) 28mm (1 1/8) 4.75mm (3/16) 26.90mm (1 1/16) 1.20mm (3/64) 26mm ( 1 ) 54mm (2 1/8) (2 3/4) 54mm (2 1/8) 69mm (2 23/32) 66mm (2 9/16) Deadbolt Strike Underplate For Deadbolt Strike Dustcap For Deadbolt Strike Standard Deadbolt Strike Pack includes both Radius and Square Cornered Strikes, Underplate, Screws & Dustcap Resista Polished Brass/ Antique Brushed Polished Polished Chrome/ Oil-Rubbed Matte Satin Antique Rustic Brass Brushed Brass Brass Chrome Chrome Br. Stainless Steel Brass Black Nickel Nickel Umber (F77-R) (F77-R/F72-R) (F73) (F41-R) (F49-R) (F49-R/F69-R) (F79) (F9714) (F42-R) (F44-R) (F8709) Door Handle Shafts 8mm Door Handle Shaft Function Door Thickness Item Number F75 35mm, 45mm & 57mm (1.375, 1.75 & 2.25) F76 35mm, 45mm & 57mm (1.375, 1.75 & 2.25) F95 35mm, 45mm & 57mm (1.375, 1.75 & 2.25) Function Door Thickness Item Number F102 35mm & 45mm Outswing (1.375 & 1.75) F102 57mm Inswing (2.25) Anti-panic door shafts for F95 & F102 functions. 60 Call

61 HBL Accessories Bushings and Set Screws Bushing Gold F7501 Steel Grey F7502 Dark Silver Black Set Screw Brass Nickel Black Nickel Cover Caps and Mounting Bolts Cover Cap for Mounting Bolt for F102 Function Resista Polished Brass/ Antique Brushed Polished Polished Chrome/ Oil-Rubbed Matte Satin Antique Rustic Brass Brushed Brass Brass Chrome Chrome Br. Stainless Steel Brass Black Nickel Nickel Umber (F77-R) (F77-R/F72-R) (F73) (F41-R) (F49-R) (F49-R/F69-R) (F79) (F9714) (F42-R) (F44-R) (F8709) Handle Mounting Bolt for F102 Function Description Door Thickness Item Number M12x1.25x 35mm & 45mm (1.375 & 1.75) M12x1.25x80mm 57mm (2.25)

62 HBL Accessories Cylinder and Shaft Positioning Spring Cylinder Brass Nickel Shaft Positioning Spring F75, F76, F95, F102 Functions Keyed Differently (Single) Keyed Alike (Sets of 25) Extended Cylinder Tail Piece for 2-1/4 Door Thickness / Part # Interconnecting Plate HBL Body Interconnecting Plate F95, F102 Functions HBL Body F75, F76, F95, F102 Functions Call

63 HBL Accessories Screws Mounting Screw for Deadbolt, Rosette and Entry Door Backplate Resista Polished Brass/ Antique Brushed Polished Polished Chrome/ Oil-Rubbed Matte Satin Antique Rustic Description Brass Brushed Brass) Brass Chrome Chrome Br. Stainless Steel Brass Black Nickel Nickel Umber (F77-R) F77-R/F72-R) (F73) (F41-R) (F49-R) (F49-R/F69-R) (F79) (F9714) (F42-R) (F44-R) (F8709) M5x Mounting Screw Pack Resista Polished Brass/ Antique Brushed Polished Polished Chrome/ Oil-Rubbed Matte Satin Antique Rustic Door Thickness Brass Brushed Brass) Brass Chrome Chrome Br. Stainless Steel Brass Black Nickel Nickel Umber (F77-R) F77-R/F72-R) (F73) (F41-R) (F49-R) (F49-R/F69-R) (F79) (F9714) (F42-R) (F44-R) (F8709) Passage F75 / Privacy F76 Function Handle Set 35mm & 45mm (1.375 & 1.75) mm (2.25) Entry F95 & F102 Function Handle Set 45mm (1.75) mm (2.25) Deadbolt E0152 Function 35mm & 45mm (1.375 & 1.75) mm (2.25) Single Exterior Dummy Handle Set 35mm & 45mm (1.375 & 1.75) Dummy Handle Pair 35mm & 45mm (1.375 & 1.75) Mounting Screw Pack for Strikes and Faceplates / 2 per pack Resista Polished Brass/ Antique Brushed Polished Polished Chrome/ Oil-Rubbed Matte Satin Antique Rustic Countersunk Screws #8 Brass Brushed Brass Brass Chrome Chrome Br. Stainless Steel Brass Black Nickel Nickel Umber (F77-R) (F77-R/F72-R) (F73) (F41-R) (F49-R) (F49-R/F69-R) (F79) (F9714) (F42-R) (F44-R) (F8709) 19mm Long (0.75) mm Long (1.50)

64 HBL Functions & Door Preparation Passage Set F75 Function Door Prep (2 3/8) or (2 3/4) 25.4 mm (1) (2) 2.8mm (7/64) 41.3 mm (1 5/8) 4 mm (5/32) 25.4mm (1.00) 54mm (2 1/8) 57.2 mm (2 1/4) T T / mm (1 1/8) 14.7mm (37/64) 57mm (2 1/4) 41.2mm (1 5/8) 33mm (1 5/16) Strike Prep R6.4mm (1/4) 2.4mm (3/32) 16.6mm (21/32) (2) 2.5mm (7/64) 25.4mm (1) 64 Call

65 HBL Functions & Door Preparation Passage Set F75 Function UL Listed / ANSI Rated Door Prep (2 3/8) or (2 3/4) 25.4 mm (1) (2) 2.8mm (7/64) 41.3 mm (1 5/8) 4 mm (5/32) 25.4mm (1.00) 54mm (2 1/8) 57.2 mm (2 1/4) T T / mm (9/16) 57mm (2 1/4) Strike Prep 2.38mm (3/32) 15.88mm (5/8) R6.35mm (1/4) (2) 2.5mm (7/64) 25.4mm (1) 33mm (1 5/16) mm (1 5/8) 65

66 HBL Functions & Door Preparation Privacy Set F76 Function Door Prep (2 3/8) or (2 3/4) 25.4mm (1) (2) 2.8mm (7/64) 41.3 mm (1 5/8) 4mm (5/32) 25.4mm (1.00) 54mm (2 1/8) 57.2mm (2 1/4) T T / 2 Strike Prep 28.6mm (1 1/8) 14.7mm (37/64) 41.2mm (1 5/8) 33mm (1 5/16) R6.4mm (1/4) 57mm (2 1/4) 2.4mm (9/32) 16.6mm (21/32) (2) 2.5mm (7/64) 25.4mm (1) 66 Call

67 HBL Functions & Door Preparation Dummy Passage Set (2) 10.3mm (13/32) 40mm (1 9/16) (0.79) 20mm OF ACTIVE DOOR PREP 20mm (0.79) (2 3/8) or (2 3/4) 67

68 HBL Functions & Door Preparation Entry Lock Set F95 Function Door Prep (2 3/8) or (2 3/4) (2) 25.4mm (1) (4) 2.8mm (7/64) (2) 4mm (5/32) 54mm (2 1/8) 139.7mm (5 1/2) (2) 57.2mm (2 1/4) 25.4mm (1) (2) ÿ 3.5mm (9/64) (2) 25.4mm (1) (4) 2.5mm (7/64) Strike Prep (2) 28.6mm (1 1/8) 8mm (5/16) 57mm (2 1/4) 33mm (1 5/16) 41mm (1 5/8) 139.7mm (5 1/2) T / 2 (2) 41.3mm (1 5/8) T (2 3/4) (8) R6.35mm (1/4) 38mm (1 1/2) 54mm (2 1/8) 6.15mm (15/64) 35.3mm (1 3/8) 16.6mm (21/32) 2.40mm (3/32) 68 Call

69 HBL Functions & Door Preparation Entry Lock Set F95 Function UL Listed / ANSI Rated Door Prep (2 3/8) or (2 3/4) (2) 25.4mm (1) (4) 2.8mm (7/64) (2) 4mm (5/32) 54mm (2 1/8) 139.7mm (5 1/2) (2) 57.2mm (2 1/4) 25.4mm (1) 139.7mm (5 1/2) T / 2 (2) 41.3mm (1 5/8) (2) 3.5mm (9/64) (2) 25.4mm (1) (4) 2.5mm (7/64) (8) R6.35mm (1/4) T Strike Prep (2) 28.6mm (1 1/8) 8mm (5/16) 57mm (2 1/4) 33mm (1 5/16) (2 3/4) 41mm (1 5/8) 38mm (1 1/2) 54mm (2 1/8) 28.58mm (1 1/8) 15.88mm (5/8) For a UL Listed / ANSI Rated deadbolt, the underplate must be installed with the deadbolt behind the deadbolt strike. 69

70 HBL Functions & Door Preparation Entry Lock Set/Grip Handle F102 Function Door Prep 54mm (2 1/8) (2) 25.4mm (1) (4) 2.8mm (7/64) (2 3/8) or (2 3/4) (2) 4mm (5/32) 25.4 mm (1) 139.7mm (5 1/2) 139.7mm (5 1/2) (2) 3.5mm (9/64) (2) 28.6mm (1 1/8) 8mm (5/16) (2) 25.4mm (1) (4) 2.5mm (7/64) (8) R6.35mm (1/4) 57mm (2 1/4) (2) 57.2mm (2 1/4) 33mm (1 5/16) 41mm (1 5/8) 210mm (8 1/4) T / 2 (2) 41.3mm (1 5/8) 14.3mm (9/16) T Strike Prep (2 3/4) 38mm (1 1/2) 54mm (2 1/8) 6.15mm (15/64) 35.3mm (1 3/8) 16.6mm (21/32) 2.40mm (3/32) 70 Call

71 HBL Functions & Door Preparation Entry Lock Set/Grip Handle F102 Function UL Listed / ANSI Rated Door Prep 54mm (2 1/8) (2) 25.4mm (1) (4) 2.8mm (7/64) (2) 4mm (5/32) (2 3/8) or (2 3/4) 25.4 mm (1) 139.7mm (5 1/2) 139.7mm (5 1/2) (2) 57.2mm (2 1/4) 210mm (8 1/4) T / 2 (2) 41.3mm (1 5/8) 14.3mm (9/16) T Strike Prep (2) 3.5mm (9/64) (2 3/4) (2) 25.4mm (1) (4) 2.5mm (7/64) (8) R6.35mm (1/4) (2) 28.6mm (1 1/8) 8mm (5/16) 57mm (2 1/4) 33mm (1 5/16) 41mm (1 5/8) 38mm (1 1/2) 54mm (2 1/8) 28.58mm (1 1/8) 15.88mm (5/8) For a UL Listed / ANSI Rated deadbolt, the underplate must be installed with the deadbolt behind the deadbolt strike. 71

72 HBL Functions & Door Preparation Thumb Turn & Deadbolt E0152 Function Door Prep (2 3/8) or (2 3/4) 25.4mm (1) 4mm (5/32) (2) 2.5 mm (7/64) 25.4mm (1) 54mm (2 1/8) 57.2mm (2 1/4) T / mm (1 5/8) T Strike Prep 8mm (5/16) (2) 3.5mm (9/64) (4) R6.4mm (1/4) 38mm (1 1/2) 54mm (2 1/8) (2 3/4) (2) 2.5mm (7/64) 22mm (7/8) 28.6mm (1 1/8) 7.34mm (19/64) 35.3mm (1 3/8) 72 Call

73 HBL Functions & Door Preparation Thumb Turn & Deadbolt E0152 Function UL Listed / ANSI Rated Door Prep (2 3/8) or (2 3/4) 25.4mm (1) 4mm (5/32) (2) 2.5 mm (7/64) 25.4mm (1) 54mm (2 1/8) 57.2mm (2 1/4) T / mm (1 5/8) T Strike Prep 8mm (5/16) (2) 3.5mm (9/64) (4) R6.4mm (1/4) 38mm (1 1/2) 54mm (2 1/8) (2 3/4) (2) 2.5mm (7/64) 22mm (7/8) 28.6mm (1 1/8) 6.35mm (1/4) 28.6mm (1 1/8) For a UL Listed / ANSI Rated deadbolt, the underplate must be installed with the deadbolt behind the deadbolt strike. 73

74 HBL Tools Installation Tool Kit for Wood Doors Consists of: 3 x High Speed Spur Bits (2 1/2", 1 1/2", 1") 1 x Center Marker (1") 1 x Drill Fixture for 25mm (1") - 73mm (2 1/8") Door Thickness x Quick Release Drill Adaptor (3/8") for Boring Bits 4 x Router Templates including Locators for Faceplate and Strike Plate Preparation Drill Jig Adapter Includes Hole Saw for Non-Wood Doors Note: Can be used with Drill Fixture (see Installation Tool Kit) Radius Corner Chisel 6mm (1/4") Replacement High Speed Spur Bit 25mm (1") mm (2 1/8") Call

75 HBL Sales Tools 6 Sided Display - Rotating Description Qty. Part Finish Required Number Profile Kit including Screws and Mounting Brackets Header and Base Kit including Screws and Series Cherry Display Board with Verona Series Cherry Display Board with München Series Cherry Display Board with New Orleans Series Mahogany Display Board with Ródos Series Mahogany Display Board with Ródos Series Mahogany Display Board with New Orleans Series Maple Display Board with Athinai Series Maple Display Board with Athinai Series Maple Display Board with Toronto Series Maple Display Board with Toronto Series Select Any 6 Display Boards Satin Nickel (F42-R) Matte Black (F9714) Matt Black (F9714) Oil-Rubbed Brass (F79) Rustic Umber (F8709) Antique Nickel (F44-R) Polished Chrome / Stainless Steel (F49-R/F69-R) Resista Brass/ Br. Brass (F77-R/F72-R) Resista Brass (F77-R) Antique Brass ((F73) Sided Rotating Display 3 Sided Display - Non Rotating Description Qty. Part Finish Required Number Profile Kit including Screws and Mounting Brackets Header and Base Kit including Screws and Labels Cherry Display Board with Verona Series Cherry Display Board with München Series Cherry Display Board with New Orleans Series Mahogany Display Board with Ródos Series Mahogany Display Board with Ródos Series Mahogany Display Board with New Orleans Series Maple Display Board with Athinai Series Maple Display Board with Athinai Series Maple Display Board with Toronto Series Maple Display Board with Toronto Series Select Any 3 Display Boards Satin Nickel (F42-R) Matte Black (F9714) Matt Black (F9714) Oil-Rubbed Brass (F79) Rustic Umber (F8709) Antique Nickel (F44-R) Polished Chrome/ Brushed Chrome (F49-R/F69-R) Resista Brass/ Br. Brass (F77-R/F72-R) Resista Brass (F77-R) Antique Brass (F73)

76 HBL Sales Tools SIS System Call your local representative for details Color Finish Ring Description 9 Finishes F77-R, F73, F41-R, F42-R, F44-R F49-R, F9714, F79, F8709 Part Number Table Top Pocket Door Display Description Cherry Display Privacy Version (M492) Mahogany Display Privacy Version (M492) Finish Polished Chrome (F49-R) Resista Brass (F77-R) Part Number Call

77 HBL Sales Tools Table Top 6-Pack Display Description Finish Part Number Cherry Display Displays include all Mahogany Display 6 series handles in F44-R, F42-R, F41-R, Maple Display F79, F9714 & F49-R/F69-R Table Top Interior Handle Display Description Cherry Display with New Orleans Handle (M1610/3939S) Cherry Display with Ródos Handle (M1603/3939S) Cherry Display with Verona Handle (M151/3939S) Mahogany Display with) Athinai Handle (M156/3939S) Mahogany Display with New Orleans Handle (M1610/3939S) Mahogany Display with München Handle (M112PL/3939S) Mahogany Display with Ródos Handle (M1603/3939S) Maple Display with Athinai Handle (M156/3939S) Maple Display with München Handle (M112PL/3939S) Maple Display with Verona Handle (M151/3939S) Finish Satin Nickel (F42-R) Matte Black (F9714) Satin Nickel (F42-R) Resista Brass/ Br. Brass (F77-R/F72-R) Satin Nickel (F42-R) Antique Nickel (F44-R) Antique Nickel (F44-R) Polished Chrome/ Br. Stainless Steel (F49-R/F69-R) Matte Black (F9714) Matte Black (F9714) Part Number Table Top Entry Handle Display Description Cherry Display with Ródos Handle (M5171/3961/3959/1603) Cherry Display with Verona Handle (M5171/3951/3949/151) Mahogany Display with New Orleans Handle (M5171/3961/3959/1610) Mahogany Display with Athinai Handle (M5170/3951/3949/156) Maple Display with München Handle (M5171/3961/3959/112) Finish Oil-Rubbed Brass (F79) Matte Black (F9714) Satin Nickel (F42-R) Resista Brass/ Brushed Brass (F77-R/F72-R) Antique Nickel (F44-R) Part Number