March 2016 Club Scrap Lite. Paris Flea Market. Preparation: Trim the Lt. Gray and White printed cutaparts into sections as indicated by the artwork.

Transcription

1 Assembly Line Scrapbooking March 2016 Club Scrap Lite Paris Flea Market Materials: Paris Flea Market CS Lite Kit Tools and Supplies: 12 Paper Trimmer Adhesive Foam Adhesive Tape 3x14 CS Grid Ruler CS Glue Pen Measurement Conversions:.125 = ⅛.25 = ¼.375 = ⅜.5 = ½.625 = ⅝.75 = ¾.875 = ⅞ LB = Left Base Page RB = Right Base Page CS Ash Ink Scissors Craft Knife and Cutting Mat Stapler and Staples Envelope Punch Board (Optional) Preparation: Trim the Lt. Gray and White printed cutaparts into sections as indicated by the artwork. Open the flaps of the three Dk. Gray coin envelopes and place horizontally into the trimmer with the flap at right; cut at 3.5. Save the envelope flaps for Layouts 1 & 2 and use the envelopes on Layouts 3 & 4. If you have an Envelope Punch Board, place the open flap of the envelope into the board at 1-1/8 and punch to create a thumb hole. *If you do not have an item to complete the layout as shown, simply omit or substitute the item.

2 March 2016 Paris Flea Market CS Lite Page 2 of 6 Paper Trimming Instructions 1. Trim one 12x12 Black Plain at 11.25, 10.5, 9.5, 8.5, 7.25, 6, and Cut the 3.25x12 horizontally at 10.25, 8.5, and Trim each 1.75x3.25 horizontally at 3 and 1.5. Cut the 2.75x12 horizontally at 11.25, 7.5, and Cut one 12x12 Pink Pattern Plain at 10 and 6. Trim the 6x12 horizontally at 8 and 4. Cut the 4x12 horizontally at 11.25, 7.5 and Trim the 2x12 horizontally at 8 and Position one 12x12 Pink Print in the paper trimmer with the bicycles in the upper left corner; trim at 11.5, 8, 5.5, and 2.5. Cut the 2.5x12 without the bicycle image horizontally at 9, 6, and Position one 12x12 White Print in the trimmer with the Eiffel Towers on the bottom edge; trim at 10.5 and 3.5.

3 March 2016 Paris Flea Market CS Lite Page 3 of 6 Layout 1 & 2 3¾x3½ 3¾x3½ 3¾x3½ 12x12 Pink Print (LB) 12x12 Pink Pattern Plain (RB) (2).75x12 Black Plains (3) 3.75x4 Pink Pattern Plains (2) 4.25x6.25 Pink Photo Mats 4.25x6.25 Black Photo Mat White Cutaparts (3) Dk. Gray Coin Envelope Flaps Pink Ribbon Printed Cotton Ribbon Lace Washi Tape 1. Adhere the three envelope flaps behind the 3.75x4 Pink Pattern Plains. 2. Trim the bird cage from the Lt. Gray cutapart and attach with foam adhesive. 3. Cut a 2 length of printed cotton ribbon, fold in half, and tape edges to the back of the Black mat.

4 March 2016 Paris Flea Market CS Lite Page 4 of 6 Layout 3 & 4 12x12 White Print (LB) 12x12 White Plain (RB) 3.25x4.25 Black Plain 2.75x3.75 Black Plain (2) 1.25x12 Black Plains (3) 2x4 Pink Pattern Plains.5x12 Pink Print 2.5x12 Pink Print 3x12 Pink Print (3) 4.25x6.25 Dk. Gray Photo Mats White Cutaparts Lace Washi Tape Cotton Printed Ribbon (3) Coin Envelopes 1. Trim a butterfly from the cotton printed ribbon with a sharp scissors and attach to the Lt. Grey cutapart with a Glue Pen. 2. Wrap the three coin envelopes with cotton ribbon and tape ends on the back.

5 March 2016 Paris Flea Market CS Lite Page 5 of 6 Layout 5 & 6 3¾x5¾ (2) 12x12 Dk. Gray Plains (LB & RB) (2) 1x12 Black Plains (2) 2.75x3.75 Black Plains (4) 1.5x1.75 Black Plains Pink Pattern Plain 3.5x12 Pink Print (4) 2.5x3 Pink Prints 7x12 White Print 4.25x6.25 Pink Photo Mat (2) 4.25x6.25 White Photo Mats Pink Ribbon White Resin Frame 1. Trim the oval Eiffel Tower from the Lt. Gray cutapart and adhere within the opening of the white resin frame.

6 March 2016 Paris Flea Market CS Lite Page 6 of 6 Layout 7 & 8 3¾x5¾ 3¾x5¾ 12x12 White Plain (LB) 12x12 Black Plain (RB) 3.25x4.25 Black Plain (2) Pink Pattern Plains 1.5x12 White Print 3.5x12 White Print 4.25x6.25 White Photo Mat (2) 4.25x6.25 Black Photo Mats White Cutaparts Black Resin Frame Pink Ribbon Cotton Printed Ribbon Lace Washi Tape 1. Cut the oval crown and oval bee from the Lt. Grey cutapart; adhere the crown within the opening of the black resin frame. Staple a small piece of folded ribbon to the top of the bee oval and attach with foam adhesive.