for wire (UTP / STP ) or wire and multi - conductor cable from 3.5mm - 9mm Max.

Transcription

1 Tools 312 SP7600 ~ SP blades model SP7603 ~ SP blades model SP76055 Adjusting the stripping length by following steps : 1. Use the HEX wrench to push out the shaft of the body and the pin of the blade. 2. Use a tweezer to remove the blades into position as Fig.C. 3. Reinstall the shaft and blade pin. for cable RG-58 (3C2V), 59/62 (4C2V), RG-6 (5C2V), 6QS. Stripping tool SP7607 SP /8" universal stripping tool for wire (UTP / STP ) or wire and multi - conductor cable from 3.5mm - 9mm Max. SP76071 SP76071 Easy stripper for UTP / STP wire for stripping wire diameter 5Ø - 6Ømm, made of poly-resin, economic type. SP76072 Keystone jack fixture SP76072 Impact and punch down tool SP76081 x Blade SP76081 Series impact tool For seating wire into terminal block or cut off wire end after terminated. SP76082 Series punch down tool With impact functiion W/O impact pressure adjusting control. SP76083 Series punch down tool Economic type W/O impact function. Blade Terminal block A B D E A B C D SP7608A for use on 66 type SP7608B for use on 110/88 type SP7608C both 66 & 110/88 type SP7608D use on 630A phone jack SP76081 SP76082 SP76083 C E SP7608E for use on krone type

2 313 Tools & Tool Kits Coax crimping tool SP76090 ~ SP76097 For crimping RG type cable SP ,62,6 8.2mm mm mm 5.4mm mm BNC,TNC,UHF,SMA-58,59, mm UHF mm SP ,6,11, mm 8.2mm 5.4mm SP ,11, mm 8.2mm mm.322 6,11,213,5,21,143,212,222, mm 8.2mm mm belden:8281,9231,9141 SP76090 SP76091 SP76095 SP mm 8.2mm SP mm F-59,62,6 mm 11,213 Coax crimping tool - ratchet type ~ SP7618 pin SQ.pin For crimping RG type cable SP7611 SP7613 SP SP7616 SP SP Coax tool kits SP76190 ~ SP76193 Coax Tool ,59,62,174,fiber optic ,179,fiber optic,belden ,59,62,174 7C,5C,4C 8,11,174,179,213 Crimping tool pin For crimping RG type cable HEX spec. SP76055(6/58/59/62) 3 blades model SP76191 for.41 6,55,58,141,142,223,303, ,fiber optic 6,58,59, SP76190 for.41 58,59,62,.187 SP76192 for.41 SP7601 (58/59/62) 2 blades model SP76193 for.41 59,62,140,210 6,59,62,140,210 59,62,140,210 6,59,62,140,210 Coax tool kits SP76195 pin SQ.pin For crimping RG type cable SP ,58,59,62,140,141,142,210, ,303,400,fiber optic,belden ,59,62,140,210,belden ,58,141,142, SP ,62,8X,140,210,belden ,58,141,142,174, SP ,174,179,180,187,188,195,fiber optic ,316,belden 8218 SP ,9,11,87A,149,165,213,214,216, ,174,179,187,188,316,belden /2 cable cutter for cutting cable Max.41 Ø(10.5mmØ) SP coax stripper for stripping RG58/59/62/6/3C2V...

3 Tools SP76200 SP SP SP SP76233 SP7626A /B SP7624 SP7627 4" Insertion & extraction tools for RS232 (20AWG) crimp type contact pin (9 1/2)" IDC crimping fixture to assemble flat cable onto IDC-type connectors for connectors Height mm 8" Modular crimping tool For cuts-strips-crimps 2 types of plug in 1 For 6P6C/RJ-12, 6P4C/RJ-11, 6P2C, 4P4C, 4P2C 8" Modular crimping tool For cuts-strips-crimps 2 types of plug in 1 For 8P8C/RJ-45, 6P6C/RJ-12, 6P4C/RJ-11, 6P2C 8" Professional modular crimping tool For 8P8C/RJ-45, 6P6C/RJ-12, 6P4C/RJ-11 and 6P6C off-set The DEC plug and 4P4C, 4P2C W/ratchet strips & cuts 5" and cutter W/adjustable screw controller 10 to 30 AWG 5.5 to 0.2mm 2 (6 1/2)" Cable cutter curve blade cuts wire up to 8Ømm 6.6" Flat cable cutter For Max. 30mm width 7.3" Crimping tool For insulated, non-insulated terminal AWG, AWG, AWG mm 2 8" Crimping tool W/cushion handle for comfortable operation For non-insulated terminal AWG 1.5, 2.5 mm 2 8.7" Ratchet crimping tool for pin terminal (insulated or non-insulated ferrules) A: AWG mm 2 B: AWG mm 2 8.7" Ratchet crimping tool For insulated terminals AWG mm 2 314

4 315 Tools SP76273 SP7628 SP76274 SP7629A /B /C SP76275 SP " Ratchet crimping tool for non-insulated open barrel and D-Sub connector AWG 8.25" Ratchet crimping tool for non-insulated open barrel and D-Sub connector (18-22AWG, 24-30AWG) 7" Computer cable stripping, splitting, cutting tool 7.3" Nibbling tool (nickel plated) Cuts up to 18AWG soft steel 1/16" soft plate 6.8" 7 In 1 tool wire stripper, wire cutter, steel wire cutter, pliers, wire loop, scale mm & inch, crimping tool A: AWG mm 2 B: AWG mm 2 C: AWG mm 2 (7 1/4)" Modular crimping tool 4P2C 4P4C 4P/6P/8P 8P2C 8P4C 8P6C 8P8C 6P2C 6P4C 6P6C SP76276 SP7642 SP76278 SP76421 SP76279 SP " Fiber optic crimping tool for.042".068".133".162".195" 3.6" Fiber optic stripping tool for wire size Ø mm 5.8" Fiber optic cutting tool 6.8" Tie gun tying and cutting 6.3" Tie gun tying and cutting (6 1/2)" Self adjusting cutter / stripper for 0.5-8mm 2 Adjustment adjusting the blades for soft or very hard sheaths Replaceable blade system every time can strip length; 25mm, 1inch Adjustable stop for consistency in wire strip lengths

5 Tools 316 SP76433A /B 6.6" 5 In 1 tool Wire stripper, wire cutter, steel wire cutter, pliers, wire loop A: AWG mm 2 B: AWG mm 2 SP " F waterproof connector crimping tool For RG59, RG6 SP7645 (9 1/2)" Coax crimping tool mm 2.5 mm 5.4 mm mm 8.2 mm Pressure adjustment (With six sections) SP " F connector tool To screw twist on F connector to the cable Push to release SP7649 (7 3/4)" Multi cutter Stainless steel blade & aluminum handle W/tpr grips SP76552 For RG-6 SP76553 For RG " F connector tool The combination tool one end for enlarging space between shield and insulation the other end to screw twist on F-connector to the cable SP " Duct cutter SP76555A /B /C F connector removal tool Blade length : A: 6" (156+2mm) B: 8" (206+2mm) C: 12"(308+2mm) SP " F connector crimping tool For F59 & F56 rings SP " Heat-sink tool For absorb heat during soldering SP76512A /B /C 8" F connector crimping tool A: RG59/62, 6 HEX type B: RG59/62, 8, 11 oval type C: RG59/62, 6 oval type SP " Telecom splices crimping tool For (UR.UG), (UY) AWG