Notes: 4" 102mm. (1) Compatible with Redwood systems

Transcription

1 PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 4" 102mm ORDERING CODE 4 5/32 106mm PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 VERSION 3 NOM. LUMENS/FT 4 COLOUR TEMP. 5 SHEILDING 6 LENGTH/FT BBR recessed led B1 B1 (factory preset) lm/ft k SO spotless lens lm/ft k (1) lm/ft k (1) ' 12 12' S# System Run (1) 8 Week lead time for 3000k and 4000k 7 SPECIFY LENGTH 8 MR 9 FINISH 10 VOLTAGE 11 DRIVER 12 CIRCUITS NL nominal MR16# MR 16 AP aluminum paint V R regular 1 1 regular EX exact W white V D dimming 2A/B 2 alternating C custom UNV universal LT lutron +E# emergency section RD redwood ready (1) +NL# night light section +GTD# generator transfer device +M MR Add 9" per lamp (1) Compatible with Redwood systems 13 MOUNTING/SUSPENSION 14 BATTERY 15 OTHER 16 IC CONTROLS 17 CUSTOM TB9# t-bar 9/16 B# battery pack F fuse DS# daylight sensor C custom TB15# t-bar 15/16 EF end feed OS# occupancy sensor ST screw slot t-bar FW# flex whip (6 std) DS+OS# daylight+occupancy sensor TG9 regular 9/16 CP Chicago plenum TG15 regular 15/16 DF drywall flange D drywall flangeless DB slip-through bracket DS drywall spackle flange See integrated controls guide for further details Please specify Driver, Battery Pack and Integrated Control Details and Custom Description: FILE NAME:BBR..SPEC August 1, 2012 Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information Axis Lighting Inc. Page: 1 / 6

2 SPECIFICATIONS RECESSED MOUNT CONSTRUCTION Housing Extruded Aluminum (0.075'' nominal) up to 70% recycled content End Cap Sheet Steel (18 ga) Interior Brackets Die Formed Sheet Steel (18 ga) Reflectors White Powder Coated Sheet Steel (22 ga) Blank Extruded Aluminum (0.075'' nominal) Lens Spotless frosted acrylic lens T-Bar Bracket Die Formed Sheet Steel (16 ga) Screw Slot T-Bar Bracket Die Formed Sheet Steel (16 ga) Slip-Through Bracket Die Formed Sheet Steel (18 ga) Spackle Flange Die Formed Perforated Sheet Steel (20 ga) Flange Extruded Aluminum (0.075'' nominal) visible flange width: 9/16" ELECTRICAL Use of Optima technology based on mid-flux Input Voltage 120V, 277V, UNV. Driver Regular, Dimming, HiLume, EcoSystem, DALI, Redwood optional CRI Minimum 80 color rendering index CCT Choice of 3000k, 3500k and 4000k color temperature with a great color consistency (within 3.5 step MacAdam ellipse). life Minimum 50,000h with 70% of lumen maintenance in 25 0 C ambient temperature, in compliance with IES LM-80 testing measurements. Thermal management Aluminium housing acting as the heat spreader to maximize life. Emergency Emergency battery pack or emergency circuit optional. FINISH Powder Coated and custom finishes are also available. WEIGHT 4 ft 14.5 lbs / 6.6 kg 8 ft 29.0 lbs / 13.2 Kg 12 ft 43.5 lbs / 19.7 Kg APPROVALS Certified to UL and CUL standards Meets NYC requirements Meets CCEC requirements (Chicago plenum) SYSTEM (S#) BEAM 4 linear systems, with the use of a strong profile, allow for a nearly hair thin connection system of continuous runs. Lengths of 4', 8', 12' as well as custom lengths are available. Runs of BEAM 4 that are greater than 12ft in length are designated as systems (S#). This means that the run is comprised of a combination of 4', 8' and/or 12' sections to be assembled on site using our joining system. For more information on systems and joining, please refer to the BEAM installation sheets available for download at. PERFORMANCE PER LINEAR FOOT AT 3500K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 600 lm 6.8w/ft 80 lm/w 800 lm 10.0w/ft 75 lm/w 1000 lm 13.6w/ft 69 lm/w * Based on a 4 foot luminaire using one driver Posibility to customize lumen output and wattage. Please consult factory FILE NAME:BBR..SPEC August 1, 2012 Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information Axis Lighting Inc. Page: 2 / 6

3 OPTICS MR16 LAMPS SO spotless lens SPOTLESS LENS Frosted acrylic snap-in lens with micro lens Blank MR16 Quantity Spacing Extruded Aluminum (0.075'' nominal) 2.0'' diameter For every 4' section, there may be up to a maximum of 4 x MR16 lamps. Each MR16 lamp is placed centered on a blank section 9'' in length. CORNERS Unlit Corners - BEAM4 features a multitude of layout patterns with the use of a number of corners, corner, T or X junctions unlit corner 4 5 / 32 " 4" For a series of MR16's within a given section length, they will be spaced evenly on a longer blank section. The directed light of MR16 lamps are fixed downward. Custom spacing may be available on special request. Between sections corner X junction T junction Lit Corners - In addition Axis offers Lit Corners including Ceiling to Ceiling, Wall to Ceiling and Ceiling to Wall. wall to ceiling lit corner At luminare ends 9" 9" For custom corner angles, please consult factory. Specifications sheets for all corners are available at: Several in a long blank section variable WARRANTY Axis lighting will warrant defective s, boards, and drivers for 5 years from date of purchase. Warranty is valid if luminaire is installed and used according to specifications. If defective, Axis will send replacement boards or drivers at no cost along with detailed replacement instructions and instructions on how to return defective components to Axis. Base Type GU 5.3 Beam Angle 40 nominal degrees Input Watts 6W Numinal Lumens 300 lumens Efficacy 50 lumens per watt Color Rendering Index (CRI) 85 Central Beam Candle Power (CBCP) 584 candelas Life 25,000 hours at L 70 Correlated color temperature (CCT) 2700K More options are available upon request. Please consult factory. FILE NAME:BBR..SPEC August 1, 2012 Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information Axis Lighting Inc. Page: 3 / 6

4 TB CEILING MOUNTING OPTIONS 4 31 /32 " 5 1 /16 " 4 31 /32 " 5 1 /16 " 4 5 /8 " 4 3 /4 " TB15 15/16" T-BAR TB9 9/16" T-BAR ST SCREW SLOT T-BAR 4 5 /8 " 5 1 /8 " 4 5 /8 " 4 3 /4 " TG15 15/16" TEGULAR TG9 9/16" T-TEGULAR DRYWALL CEILING MOUNTING OPTIONS 4 7 /32 " /32 " 4 23 /32 " 5 9 /32 " 4 29 /32 " 6 21 /32 " /32 " D FLANGELESS WITH 1/4-20 STUD MOUNTING DB VISIBLE FLANGES WITH SLIP-THROUGH BRACKET DF VISIBLE FLANGES WITH 1/4-20 STUD MOUNTING DS SPACKLE FLANGES OTHER MOUNTING OPTIONS BEAM 4 is also available with pendant, surface, wall and recessed wall mounted options. Specification sheets and Installation sheets for all mounting for BEAM luminaires are available for download at FILE NAME:BBR..SPEC August 1, 2012 Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information Axis Lighting Inc. Page: 4 / 6

5 INTEGRATED CONTROL OPTIONS BEAM 4 luminaires allow the use of integrated controls such as daylight sensors (DS), occupancy sensors (OS) and individual daylight sensors and occupancy sensors (DS+OS). These options can be seamlessly integrated into our luminaires. The control system could be used to optimize the lighting of the space by reducing energy consumption through daylight harvesting and occupancy, thereby improving the overall interior environment and allowing for LEED credits. CONTROL SENSORS Consult factory for other options. SENSORS BRAND Model TYPE CODE COMPATIBLE DRIVER Lutron EC-DIR-WH Daylight LD EcoSystem Daylight Sensor (DS) Occupancy Sensor (OS) Daylight and Occupancy Sensors (OS+DS) Wattstopper FD-301 Daylight WD Dimming 0-10V Philips Luxsense Daylight PL Dimming 0-10V Wattstopper FS-205 PIR Occupancy WP1 Dimming or non-dimming FS-355 (Consult Factory) PIR Occupancy WP2 Dimming or non-dimming FS-505 (Consult Factory) Ultrasonic Occupancy WU1 Dimming or non-dimming FS-505C Ultrasonic Occupancy WU2 Dimming or non-dimming Wattstopper Philips Please consult factory Dimming 0-10V PHOTOMETRIC DATA 600 lm/ft CANDELA DISTRIBUTION COEFFICIENTS OF UTILIZATION (%) Zonal Lumens Ceiling PHOTOMETRIC CURVE Vertical Angle Wall Based on floor reflectance of LUMINANCE DATA (CD/M 2) Vertical Angle Lumaire Lumens: 2145 lm Input Watts: 6.8 w Efficacy: 80 lm/w IES FILE: BBD-B SO-4.IES All IES files for other lamping are available for download at: FILE NAME:BBR..SPEC August 1, 2012 Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information Axis Lighting Inc. Page: 5 / 6

6 PHOTOMETRIC DATA 800 lm/ft CANDELA DISTRIBUTION COEFFICIENTS OF UTILIZATION (%) PHOTOMETRIC CURVE Lumaire Lumens: 2982 lm Input Watts: 10.8 w Efficacy: 75 lm/w IES FILE: BBD-B SO-4.IES Zonal Lumens Vertical Angle LUMINANCE DATA (CD/M 2) Vertical Angle Ceiling Wall Based on floor reflectance of lm/ft PHOTOMETRIC CURVE CANDELA DISTRIBUTION Zonal Lumens Vertical Angle LUMINANCE DATA (CD/M 2) COEFFICIENTS OF UTILIZATION (%) Ceiling Wall Based on floor reflectance of Lumaire Lumens: 3744 lm Input Watts: 13.6 w Efficacy: 69 lm/w IES FILE: BBD-B SO-4.IES Vertical Angle All IES files for other lamping are available for download at: FILE NAME:BBR..SPEC August 1, 2012 Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information Axis Lighting Inc. Page: 6 / 6