Emerson Network Power MPH2 Rack PDU

Transcription

1 1.1 SUMMARY Emerson Network Power MPH2 Rack PDU GUIDE SPECIFICATIONS 2.0 GENERAL This specification document defines the electrical and mechanical characteristics and requirements for the Emerson Network Power MPH2, a continuous-duty, solid-state rack power distribution unit (PDU). The MPH2 system delivers power distribution, monitoring and/or outlet control to plug/cord-connected sensitive electronic equipment. The product is part of the Emerson Network Power Rack PDU platform, a family of rack power distribution systems designed to manage power from the critical source all the way to each individual outlet. 1.2 STANDARDS The MPH2 PDU shall be designed in accordance with the applicable sections of the current revision of the following documents. Where a conflict arises between these documents and statements made herein, the statements in this specification shall govern North America 120V or 200V-240V or 208/120V single-phase; and 200V-240V or 208/120V or 415/240V three-phase units UL (2nd Edition) + Amendment 1:2009 CSA C22.2 NO, (2nd Edition) + Amendment 1:2009 IECEE CB Full Certification Scheme (CB-FCS) FCC Part 15, Class A, Industrial RoHS Compliant (Reduction of Hazardous Substances) WEEE Compliant (Waste of Electrical and Electronic Equipment) PSE Appendix 12 J (H26), J55022(H22) Europe 230V single-phase; and 400/230V three-phase units IEC :2005 (Second Edition) + Amendment 1:2009 CSA C22.2 NO (2nd Edition) + Amendment 1:2009 IECEE CB Full Certification Scheme (CB-FCS) EN55022: A1: 2007, Class A, Industrial, EN55024: A1: A2:2003, Class A, Industrial IEC :2014 (ed.3), IEC :2013 (ed.3) IEC /3/4/5/6/8/11 RoHS Compliant (Reduction of Hazardous Substances) BV Compliant (Bureau Veritas, BV-BG factory inspected) WEEE Compliant (Waste of Electrical and Electronic Equipment) SL-20862_REV1_ Guide Specifications

2 2.1 RACK PDU HARDWARE 2.0 SYSTEM DESCRIPTION The MPH2 rack PDU shall offer remote monitoring and control capabilities as well as environmental monitoring options, multiple input power selections and output configurations. MPH2 managed rack PDUs shall be constructed of extruded aluminum and shall be available in vertical, zero-u or rack-mounted horizontal 1U, 2U form factors. An onboard LCD user interface and general mounting provisions for rack applications shall be provided. Input power shall be via either factory-integrated cord or hard-wired input. All corded MPH2 rack PDUs shall include a 10ft. (3 meter) input power cord with appropriate input plug connection. The cord interface to the MPH2 rack PDU chassis shall be designed for flexibility to accommodate cord bend radius of higher amperage units. Overload protection shall be provided via electronic current sensing and slim profile, 100% rated hydraulicmagnetic branch breakers rated at 5kAIC. IEC output receptacles shall feature locking capability via optional cable restraints or optional locking power cord sets. C13, C19 and C20 inlets shall have locking capability Standard Unit Dimensions (HxWxD) 0U Vertical-Mount, Longest Height, Single Width Dimensions: 77.5" x 2.2" x 2.8" (1971 x 56 x 71mm) 0U Vertical-Mount, Longer Height, Single Width Dimensions: 71.9" x 2.2" x 2.8" (1827 x 56 x 71mm) 0U Vertical-Mount, Standard Height, Single Width Dimensions: 68.4" x 2.2" x 2.4" (1737 x 56 x 61mm) 0U Vertical-Mount, Shorter Height, Single Width Dimensions: 39.5" x 2.2" x 2.5" (1004 x 56 x 64mm) 0U Vertical-Mount, Shortest Height, Single Width Dimensions: 36.1" x 2.0" x 2.5" (917 x 51 x 64mm) 1U 19 Horizontal Rack Mount Dimensions 17.3 x 9.8 x 1.7 (440 x 250 x 44 mm) o 1.75 (44.45mm) rack clearance space per EIA-310-C-Standard 2U 29 Horizontal Rack Mount Dimensions 17.3 x 9.8 x 3.5 (440 x 250 x 88 mm) o 3.5 (88.90mm) rack clearance space per EIA-310-C-Standard 2.2 MONITORING AND CONTROL A. Metering Parameters The MPH2 rack PDU shall monitor the electrical attributes of an individual rack PDU, including real-time remote and local display of aggregate and branch electrical parameters (status, thresholds, alarms) via a factoryintegrated modular, hot swappable RPC2 communications module and an onboard LCD user interface. Parameters displayed by the RPC2 module and LCD shall include voltage, frequency, current, kw, kva, power factor, kwh and crest factor. The MPH2 rack PDU shall also include an LED display to indicate whether input power is On or Off, receptacle status and whether the RPC2 module is transmitting and receiving properly. B. Metering Accuracy Voltage: ±1% +0.1V Current: ±1.5% A from 1% to 10% of unit rating; ±1% +0.01A from >10% to 125% of unit rating C. Supported Management Versions DHCP, LDAP, AD, NTP, SYSLOG, HTTP, HTTPS, SSH, Telnet, CLI, USB 2.0, RS-232 and 1-Wire bus shall be supported. The RPC2 shall provide Web-based remote monitoring via a direct IP network connection. The MPH2 rack PDU supports all major remote authentication and encryption protocols to support seamless integration with any corporate security architecture. SNMP v1, v2 and v3 support IPv4 and IPv6 support Velocity protocol support D. Supported Sensor Configurations Optional Liebert SN sensors shall be available in both integrated and modular configurations. Integrated versions (SN-Zxx) shall provide a temperature and/or humidity monitoring interface. Modular versions (SN- T/TH/3C) shall allow users to build custom configurations with temperature, temperature-plus-humidity, and contact SL-20862_REV1_ Guide Specifications

3 monitoring interface. SN sensors shall be cable-connected to the RPC2 module, allowing the user to locate SN sensors to suit positioning requirements. General mounting provisions for rack applications shall be provided. E. External Local Display The optional Liebert RPCBDM-1000 (basic display module) shall provide local display of electrical status for all connected MPH2 systems. Display information shall be accessible via a navigation switch on the RPC BDM The RPC BDM shall be connected to the RPC module with an Ethernet cable, allowing the user to place the display for ease of viewing. An Ethernet cable 6.5 feet (2 m) long and general mounting provisions shall be provided. A single RPC BDM-1000 shall permit viewing up to four MPH2 rack PDUs connected as a Rack PDU Array. The RPC BDM-1000 shall not be required for MPH2 rack PDU operation; its use requires the RPC or RPC2 module. F. Rack PDU Array An optional Rack PDU Array interface can be made to three additional MPH2 rack PDUs, or Emerson MPH and MPX Rack-PDU systems, enabling viewing of up to four rack PDUs over a single IP connection. 2.3 MPH2 Rack PDU Types MPHB: Rack PDU Metered MPHB series PDU s shall provide metering of the overall input and of the individual branches. MPHC: Rack PDU Metered and Outlet Switched MPHC series PDU s shall provide metering of the overall input and of the individual branches and shall support individual On/Off control of each outlet. MPHM: Outlet Metered MPHM series PDU s shall provide metering of the overall input and of the individual branches and individual outlets. MPHR: Outlet Metered and Outlet Switched MPHR series PDU s shall provide metering of the overall input and of the individual branches and individual outlets; and shall support individual On/Off control of each outlet MPH2 Managed Rack PDUs North American Input / Output Systems V-Single-Phase Input / Output Vertical Form Factor 18 receptacles / 20 or 30 Amp shall include 5-20R (T-slot) receptacles; one L5-20P or L5-30P plug connection; one 10-foot (3m) long input power cord; and shall be 68.4 in. (1737mm) long V-Single-Phase Input / Output Vertical Form Factor 16 receptacles / 20 Amp shall include 16 IEC-C13 receptacles, one IEC C20 input connector and shall be in. (1735mm) long V-Single-Phase Input / Output Vertical Form Factor 8 receptacles / 20 Amp shall include eight IEC-C13 receptacles, one IEC C20 input connector and shall be 39.5 in. (1004mm) long V-Single-Phase Input / Output Vertical Form Factor 24 or receptacles / 30 Amp shall include 24 IEC-C13 or 18 IEC-C13 plus six IEC-C19 receptacles, one L6-30P or L14-30 plug connection; one 10-foot (3m) long input power cord; and shall be 68.4 in. (1737mm) long V-Three-Phase Input / Output Vertical Form Factor receptacles / 30 Amp shall include 18 IEC-C13 and six IEC-C19 receptacles; one L15-30 plug connection; one 10-foot (3m) long input power cord; and shall be 68.4 in.(1737mm) long. 120/208V-Single-Phase-Input / Output Vertical Form Factor 24 receptacles / 30 Amp shall include 24 IEC-C13 receptacles; one L14-30P plug connection; one 10-foot (3m) long input power cord; and shall be 68.4 in. (1737mm) long. 120/208V-Three-Phase Input / Single-Phase Output Vertical Form Factor or receptacles / 30 Amp shall include 18 IEC-C13 plus six IEC-C19 or 12 IEC-C13 plus four IEC-C19 plus six 5-20R (T-slot) receptacles; one L21-30P plug connection; one 10-foot (3m) long input power cord; and shall be 68.4 in. (1737mm) long. SL-20862_REV1_ Guide Specifications

4 240/415V-Three-Phase Input / Single-Phase Output Vertical Form Factor or receptacles / 30 Amp shall include six IEC-C13 plus 12 IEC-C19 or 18 IEC-C13 plus six IEC-C19 receptacles; one L22-30P plug connection; one 10-foot (3m) long input power cord; and shall be 68.4 in. (1737mm) long V-Single-Phase Input / Output Horizontal Form Factor 9 receptacles / 15 Amp shall include nine 5-20R receptacles; one 5-15P plug connection 19 1U horizontal rack mount unit with 2 mounting brackets V-Single-Phase Input / Output Horizontal Form Factor 9 receptacles / 20 Amp shall include nine 5-20R receptacles; one L5-20P plug connection 19 1U V-Single-Phase Input / Output Horizontal Form Factor 9 receptacles / 30 Amp shall include nine 5-20R receptacles; one L5-30P plug connection 19 1U 9 receptacles / 20 Amp shall include nine IEC-C13 receptacles; one IEC C20 input connector 19 1U 8 receptacles / 20 Amp shall include six IEC-C13 plus two IEC-C19 receptacles; one IEC C20 input connector 19 1U 10 receptacles / 20 Amp shall include eight IEC-C13 plus two IEC-C19 receptacles; one IEC C20 input connector 19 1U 12 receptacles / 20 Amp shall include twelve IEC-C13 receptacles; one IEC C20 input connector 19 1U 9 receptacles / 20 Amp shall include nine IEC-C13 receptacles; one L6-20P plug connection 19 1U 12 receptacles / 20 Amp shall include twelve IEC-C13 receptacles; one L6-20P plug connection 19 1U 8 receptacles / 30 Amp shall include two IEC-C13 plus six IEC-C19 receptacles; one L6-30P plug connection 19 1U 9 receptacles / 30 Amp shall include nine IEC-C13 receptacles; one L6-30P plug connection 19 1U 12 receptacles / 30 Amp shall include twelve IEC-C13 receptacles; one L6-30P plug connection 19 1U 8 receptacles / 30 Amp shall include six IEC-C13 plus two 5-20R receptacles; one L14-30P plug connection 19 1U V-Three-Phase Input / Output Horizontal Form Factor 8 receptacles / 30 Amp shall include two IEC-C13 plus six IEC-C19 receptacles; one L15-30P plug connection 19 1U V-Three-Phase Input / Output Horizontal Form Factor 16 receptacles / 50 Amp shall include four IEC-C13 plus twelve IEC-C19 receptacles; one CS8365C plug connection 19 2U V-Three-Phase Input / Output Horizontal Form Factor 16 receptacles / 60 Amp shall include four IEC-C13 plus twelve IEC-C19 receptacles; one IEC A 3P4W plug connection 19 2U SL-20862_REV1_ Guide Specifications

5 208/120V -Three-Phase Input / Output Horizontal Form Factor 8 receptacles / 30 Amp shall include two IEC-C13 plus six IEC-C19 receptacles; one L21-30 plug connection 19 1U 415/240V-Three-Phase Input / 240V Output Horizontal Form Factor 18 receptacles / 30 Amp shall include eighteen IEC-C13 receptacles; one L22-30 plug connection 19 2U SL-20862_REV1_ Guide Specifications

6 A. Ambient Temperature Operating: 32A or Less Input Models: 32 F to 140 F (0 C to 60 C) Operating: 40A and 48A Input Models with case ventilation: 32 F to 140 F (0 C to 60 C) Storage: -13 F to 185 F (-25 C to 85 C) B. Relative Humidity 10 to 90% non-condensing 3.0 ENVIRONMENTAL CONDITIONS C. Altitude 6562 ft. (2,000m) without power derating when operated within the temperature range specified in Section 1.5, Item A D. Electrostatic Discharge The 120/230V units shall be able to withstand an electrostatic discharge compliant to EN , Level 3, Criteria A, without damage and without affecting the connected load. E. Overcurrent protection F. Insulation UL489-Listed, CSA, TUV, CCC Overcurrent circuit breaker, 20A, 5000 A A.I.C Class I, Reinforced SELV 3.1 USER ACCESSORIES AND PACKAGING The MPH2 system shall be supplied with one user manual. The manual shall include installation drawings and instructions, a functional description of the equipment, safety precautions, illustrations and operating procedures. A quick-start guide and general mounting provisions for rack applications shall be provided. The shipping packaging shall meet the requirements of ISTA Procedure 1A and 2A. 3.2 WARRANTY Emerson Network Power shall warrant the MPH2 against defects in materials and workmanship for two (2) years. Optional one-year and three-year extensions shall be available from Emerson. The manufacturer s standard and extended warranties shall cover all parts. Refer to the MPH2 warranty statement for specific terms. 3.3 QUALITY ASSURANCE Manufacturer Qualifications Emerson provides more than 30 years of experience in the design, manufacture and testing of solid-state IT support systems and the company shall be certified to ISO 9001 (2008) Factory Testing Before shipment, the product shall be fully tested to ensure compliance with the specification. SL-20862_REV1_ Guide Specifications