PHOTOCRYL Radiation curable oligomers amine modified

Transcription

1 PHOTOCRYL Radiation curable oligomers amine modified A100 Amine functional polyether 100-0,09 Amine functional oligomer with extremely low viscosity. Can be used in all applications where reactivity and low viscosity is required. E.g. Wood coating, flexographic inks, OPV. A101 Acrylated amine synergist 100-0,02 Amine synergist for all applications, to enhance reactivity and as co-initiator for Benzophenone. Low odour! A102 Acrylated amine Synergist High viscosity amine synergist designed for use in both overprint varnishes and offset inks. Used in areas where low taint and odour are required.

2 PHOTOCRYL Radiation curable epoxy oligomers E200/6GP Epoxy 94 GPTA 3 (70 C) E200/20GP Epoxy 80 GPTA 50 E200/25GP Epoxy 75 GPTA 29 This product is suited to a variety of applications both in printing inks and varnishes. It is particularly useful in lithographic inks due to its dilution in GPTA. Supplied in oligomeric tri for enhanced reactivity. Ideally suited for use in pigmented coatings, inks or where low irritancy is required. Suited for a variety of applications both in printing inks and varnishes. This product is particularly useful in lithographic inks due to its dilution in GPTA. E200/20HD Epoxy 80 HDDA 12 Suited for a variety of applications both in printing inks and varnishes. This product is particularly useful screen inks. E200/20TP Epoxy 80 TPGDA 32 E200/40TM Epoxy 60 TMPTA 8 Bisphenol A epoxy which imparts outstanding reactivity, flow and gloss. Suitable for water white coatings and overprint varnishes. Suited for a variety of applications both in printing inks and varnishes. This product is particularly useful in printed circuit boards as well as metal decorating finishes.

3 PHOTOCRYL Radiation curable epoxy oligomers E202 Epoxy Low viscosity epoxy which exhibits excellent reactivity, good flexibility and substrate wetting. Suitable for monomer free coatings, applications where low taint and odour are required as well as metallic pigment pastes. E203/20HD Epoxy novolac 80 HDDA 15 Lower viscosity. Better adhesion due too HDDA. E203/20TP Epoxy novolac 80 TPGDA 45 Highly functional oligomer which has outstanding hardness and chemical and humidity resistance. Can be used on glass, aluminium and plastics. Ideal for CD and DVD coatings. E204/35BG Epoxy novolac 65 Butylglycol acetate 14 Can be used in various electronic areas such as solder mask or etch resists. The resin contributes significantly to adhesion, heat resistance and chemical resistance. E204/35PM Epoxy novolac 65 PMA 12 Can be used in various electronic areas such as solder mask or etch resists. The resin contributes significantly to adhesion, heat resistance and chemical resistance. E205 Acrylated epoxidised soyabean oil Outstanding pigment wetting characteristics, ideally suited for use in litho and flexographic inks to improve gloss and colour strength. Also enhances flexibility in coatings and varnishes.

4 PHOTOCRYL Radiation curable epoxy oligomers E207 Epoxy >150 Because of the high molecular weight this solid resin shows a physical dry film after applicationand very low shrinkage. So it is ideal for laminating adhesives, DVD bonder and coatings,etc. E207/25HD Epoxy 75 HDDA 18 Highly flexible oligomer with excellent elasticity and adhesion properties, it is non-yellowing with extremely good exterior durability, so can replace aliphatic urethane s. Wide range of applications including parquet flooring, inks, coatings for plastic and metal substrates. E207/25TP Epoxy 75 TPGDA 38 Highly flexible oligomer with excellent elasticity and adhesion properties, it is non-yellowing with extremely good exterior durability, so can replace aliphatic urethane s. Wide range of applications including parquet flooring, inks, coatings for plastic and metal substrates.

5 PHOTOCRYL Radiation curable polyester s P300 Polyester Low viscosity polyester suited for a variety of applications both in printing inks and varnishes. This product is particularly useful in areas where there are adhesive problems or where low monomer content is a requirement. It is a durable resin which can be used in many applications as well as in plastics, such as in primers and sealers for wood. P301 Aminated polyester Low viscosity polyester suited for a variety of applications both in printing inks and varnishes. This product is particularly useful in areas where there are adhesive problems or where low monomer content and reactivity is a requirement. P302 Polyester 100-1,2 Low viscosity polyester suited for a variety of applications both in printing inks and varnishes. This product is particularly useful in areas where there are adhesive problems or where low monomer content is a requirement. It is a durable resin which can be used in many applications as well as in plastics, such as in primers and sealers for wood. P303 Polyester 100-6,0 Low viscosity polyester for systems with high reactivity, hardness and chemical resistance. Good pigment wetting. Cross-linkable with isocyanates for dual cure applications. DP 68 Polyester 100-0,4 Low viscosity, polyester suited for a variety of applications both in printing inks and varnishes. This product is particularly useful in areas where low viscosity is a requirement. Because of its functionality of four, high reactivity and crosslinking density is provided. Ideal for spray application onto wood and metal where Xi labelling is to be avoided.

6 PHOTOCRYL Radiation curable polyester s DP 97 DP143 Aminated polyester Aminated polyester 100-2,0 Low viscosity polyester for systems with high reactivity, hardness and chemical resistance. Ideal for spray applications and systems onto wood and metal where Xi labelling is to be avoided ,5 DP143 is a low viscosity aminated polyester which can be cured under ultraviolet light or electron beam. The structure of the molecule is such that it has excellent flexibility, low film shrinkage and excellent cure response.dp143 is suited for a variety of applications both in printing inks and varnishes. This product is particularly useful in areas where there are adhesive problems or where low monomer or amine/ amine synergist content is a requirement. It is a durable resin which can be used in many applications as well as in plastics, such as in primers and sealers for wood. The level of amination is such that the product gives minimal yellowing.

7 PHOTOCRYL Radiation curable urethane oligomers U400 Aromatic Urethane C Very flexible. Good cure response. Good adhesion to plastic. Elongation >100%! U401 Aliphatic Urethane >100 Very flexible. Good cure response. Good adhesion to plastic. Good durability and non yellowing properties.elongation >100%! U402/20HD Aliphatic Urethane 80 HDDA 20 Reactive, aliphatic urethane. Hard, durable, non-yellowing. Ideal for exterior coatings, screen inks and general top coats. DP 84 Aliphatic Urethane 80 HDDA C Good cure response. Good adhesion to difficult substrates. Hard but flexible films. Good durability and non yellowing properties. Ideal for screen inks and to improve adhesion. DP102 Aliphatic Urethane 80 IDA C PHOTOCRYL DP102 is a urethane which can be cured under ultraviolet light or electron beam. The structure of the molecule is such that it is highly reactive with the product giving excellent film properties. The product gives good tough, abrasion resistant coatings. DP102 is suited for a variety of applications in printing inks, varnishes and adhesives. This product was specifically developed for use as a DVD adhesive, either alone or in combination with other resins such as E207. DP102 has very low (undeterminable) levels of reactive free isocyanate groups.

8 PHOTOCRYL Specialities DP73 Acrylate 60 HDDA >100 Suited for a variety of applications both in printing inks and varnishes. This product is particularly useful as a primer/ base coat onto substrates which are normally difficult to adhere to. PHOTOCRYL DP73 has been formulated specifically to improve adhesion, however additionally it does give relatively good film performance and gives excellent weatherability results. It is therefore recommended for both internal and external use.

9 PHOTOCRYL Water based Emulsions content (%) Typical C phvalue MfT W500 Urethane copolymer dispersion 37 <250 m Pa.s 7,5-8,5 ca. 18 C W500 shows an excellent chemical resistance and hardness. The cure response is fast. The very fine particle size of the emulsion leads to coatings showing superior transparency. W500 shows a physical dry as well, so it is an ideal binder for waterbased UV curable wood coatings. W501 Urethane copolymer dispersion 37 <250 m Pa.s 7,5-8,5 < 0 C W501 has good chemical resistance and hardness. The cure response is fast. The very fine particle size of the emulsion leads to coatings showing superior transparency. W501 shows a physical dry as well so it is an ideal binder for waterbased UV curable wood coatings. In comparision to PHOTOCRYL W 500 the coating shows more flexibility. PHOTOCRYL W 501 is free of reactive monomers or solvents and does not require any labelling W502 Urethane copolymer dispersion 37 <250 m Pa.s 7,5-8,5 < 0 C In comparision to PHOTOCRYL W 501 the coating is softer. W 502 is free of reactive monomers or solvents and does not require any labelling. W503 Urethane copolymer dispersion 37 <250 m Pa.s 7,5-8,5 < 0 C In comparision to PHOTOCRYL W 500 the coating shows a fast physical dry, but less chemical resistance. PHOTOCRYL W 503 is free of reactive monomers or solvents and does not require any labelling.