PLCC W White Datasheet

Transcription

1 PLCC Series PLCC W White Datasheet Features : High luminous Intensity and high efficiency Based on InGaN / GaN technology Wide viewing angle : 120 Excellent performance and visibility Suitable for all SMT assembly methods IR reflow process compatible Environmental friendly; RoHS compliance Typical Applications : Signal and Symbol Luminaire Indoor and Outdoor Displays Backlighting (illuminated advertising, general lighting) Interior Automotive Lighting Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 8 1

2 Table of Contents General Information...3 Absolute Maximum Ratings...4 Characteristics...4 Luminous Flux Characteristic...5 Voltage Bin Structure...5 Mechanical Dimensions...6 Color BIN code...7 Characteristic Curve...12 Reflow Profile...14 Reliability...15 Product Packaging Information...16 Revision History...17 About Edison Opto...17 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 8 2

3 General Information Introduction Ultra high luminous efficacy, combined with the flexibility in design due to its slim and miniature size, PLCC LED Series are optimized to be used as lighting for signboard. Ordering Code Format 2 T 04 X2 xw xx 000 xxx X1 X2 X3-X4 X5-X6 X7-X8 X9-X10 X11-X13 X14-X16 X1 X2 X3-X4 X5-X6 X7-X8 Type Component Series Wattage Color 2 Emitter T PLCC X2 0.2W CW Cool White NW WW Neutral White Warm White X9-X10 X11-X13 X14-X16 Internal code PCB Board Serial Number Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 8 3

4 Absolute Maximum Ratings Absolute maximum ratings (T a =25 o C) Parameter Symbol Value Units DC Forward Current I F 90 ma Pulse Forward Current (tp 100μs, Duty cycle=0.25) I pulse 200 ma Reverse Voltage V R 5 V LED Junction Temperature T J 125 C Operating Temperature ~ +85 C Storage Temperature ~ +125 C ESD Sensitivity (HBM) V B 2,000 V Soldering Temperature T s Reflow Soldering : 255~260 o C/10~30sec Manual Soldering : 350 o C/3sec Note: I pulse condition: pulse width 0.1msec and duty 1/10. Characteristics Parameter Symbol Value Units Viewing Angle (Typ.) 2Θ 1/2 120 Degree Thermal resistance - 30 CRI (Typ.) - CCT (Cool White) (Neutral White) (Warm White) JEDEC Moisture Sensitivity - - CW-70 NW-75 WW Level 2a Floor Life Conditions: 30 C / 60% RH Soak Requirements(Standard) Time (hours): 120+1/-0 Conditions: 60 C / 60% RH o C/W - K - Notes: 1. 2θ 1/2 is the off-axis angle where the luminous intensity is half of the axial luminous intensity. 2. Color rendering index CRI tolerance : ±2. 3. CIE_x/y tolerance: ± Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 8 4

5 Luminous Flux Characteristic Luminous Flux Characteristics, I F =60mA and T J =25 C Color Group Min. Luminous Max. Luminous Typ. Luminous Intensity (mcd) Forward Current (ma) Order Code Cool White ,500 2T04X2CW A Neutral White Warm White ,300 2T04X2NW ,200 2T04X2WW Note: The luminous flux performance is guaranteed within published operating conditions. Edison Opto maintains a tolerance of ±10% on flux measurements. Voltage Bin Structure Group Min. Voltage (V) Max. Voltage (V) VA VB VC VA VB VC VA Note: Forward voltage measurement allowance is ± 0.06V. Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 8 5

6 Mechanical Dimensions Emitter Type Dimension Polarity mark Unit: mm Tolerance: ±0.2mm Housing Lead Frame Circuit Solder Pad Polarity + Notes: 1. All dimensions are measured in mm. 2. Tolerance : ± 0.2 mm Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 8 6

7 Color BIN code Cool White CIE-y K Y K Y K Y K X40 X30 X20 X10 Y10 W50 W40 W30 W20 W K V40 V30 V20 V10 V K CIE-x Neutral White K 4100K K S40 CIE-y K U40 U30 U20 U10 T30 T20 T10 T00 T40 S10 S00 S20 S U CIE-x Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 8 7

8 Warm White CIE-y R K 3500K N40 M40 P40 Q40 N30 M30 R40 P30 Q30 M20 N20 R30 P20 Q20 M10 N10 R20 P10 Q10 M00 N00 R10 P00 Q K 2850K 2670K 3050K CIE-x Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 8 8

9 Cool White Y10 Y20 Y30 Y40 X Y X Y X Y X Y X10 X20 X30 X40 X Y X Y X Y X Y W10 W20 W30 W40 W V00 V10 V20 V30 V Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 8 9

10 Neutral White U00 U10 U20 U30 U T00 T10 T20 T30 T S00 S10 S20 S30 S Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 8 10

11 Warm White R00 R10 R20 R30 R Q00 Q10 Q20 Q30 Q P00 P10 P20 P30 P N00 N10 N20 N30 N M00 M10 M20 M30 M Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 8 11

12 Characteristic Curve Spectrum Normalized Relative Intensity Ta = 25 o C I F = 20mA/chip Normalized Relative Intensity Ta = 25 o C I F = 20mA/chip Wavelength λ(nm) Wavelength vs. relative intensity for PLCC 5050 series Cool White. Wavelength λ(nm) Wavelength vs. relative intensity for PLCC 5050 series Neutral White. Radiation Diagram Normalized Relative Intensity Ta = 25 o C I F = 20mA/chip Normalized Relative Intensity Ta = 25 o C I F = 20mA/chip Wavelength λ(nm) Wavelength & relative intensity for PLCC 5050 series Warm White Radiation Angle Beam pattern diagram for PLCC 5050 series Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 8 12

13 Luminous Flux vs. Forward Current Forward Voltage vs. Forward Current Normalized Relative Intensity Forward Current I F (ma) / Chip Forward Current I F (ma) / Chip Forward current vs. relative intensity for PLCC 5050 series Forward Voltage V F (V) Forward current vs. forward voltage for PLCC 5050 series Luminous Flux vs. Ambient Temperature Normalized Relative Intensity I F =20A/ Chip Ambient Temperature T a ( o C) Ambient temperature & relative intensity for PLCC 5050 series Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 8 13

14 Reflow Profile The following reflow profile is from IPC/JEDEC J-STD-020D which provided here for reference. Reflow Profiles Classification Reflow Profiles Profile Feature Preheat & Soak Temperature min (Tsmin) Temperature max (Tsmax) Time (Tsmin to Tsmax) (ts) Average ramp-up rate (Tsmax to Tp) Liquidous temperature (TL) Time at liquidous (tl) Pb-Free Assembly 150 C 200 C seconds 3 C/second max. 217 C seconds Peak package body temperature (Tp)* 255 C ~260 C * Classification temperature (Tc) 260 C Time (tp)** within 5 C of the specified classification temperature (Tc) Average ramp-down rate (Tp to Tsmax) Time 25 o C to peak temperature 30** seconds 6 C/second max. 8 minutes max. Notes: 1. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum. 2. ** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum. Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 8 14

15 Reliability NO. Test Item Test Condition Remark 1 Temperature Cycle 2 Thermal Shock -40 C~100 C 30, 30, mins -40 C~100 C 15, 15 mins 10 sec 100 Cycle 100 Cycle 3 Resistance to Soldering Heat T SOL =260 C, 30 sec 3 times 4 Moisture Resistance 25 C~65 C 90% RH 24 hrs / 1 cycle 10 Cycle 5 High-Temperature Storage T A =100 C 1,000 hrs 6 Humidity Heat Storage T A =85 C RH=85% 1,000 hrs 7 Low-Temperature Storage T A =-40 C 1,000 hrs 8 Operation Life test 25 C 1,000 hrs 9 High Temperature Operation Life test 85 C 1,000 hrs 10 High Humidity Heat Life Test 85 o C, 85%RH 1,000 hrs 11 ON/OFF Test 30 sec ON, 30 sec OFF 1.5W times Failure Criteria Item Criteria for Judgment Min. Max. Lumen Maintenance 85% - Δu'v' Forward Voltage - Initial Data x 1.1 Reverse Current - 10 μa Resistance to Soldering Heat No dead lamps or visual damage Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 8 15

16 Product Packaging Information (-) (+) Seal Reel Taping reel dimensions Label Moisture absorbent material Package & label Label Moisture proof bag Item Quantity Total Dimensions(mm) Reel 1,000pcs 1,000pcs R=178 Box 4 Reels 4,000pcs 240*235*67 Carton 5 boxes 20,000pcs 353*254*256 Starting with 50pcs empty, and 50pcs empty at the last Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 8 16

17 Revision History Versions Description Release Date 1 Establish order code information 2012/11/ Update the value of Characteristic 2. Correct the crucuit of mechanical dimension 1. Correct the Unit of Luminous Flux 2. Revise the name of Datasheet 3. Add JEDEC Moisture Sensitivity 4. Add Reliability 1. Add Color BIN Code 2. Update luminous flux characteristic 3. Revise Voltage bin structure 2013/04/ /08/ /01/09 5 Revise color BIN value 2015/03/05 6 Revise Luminous flux characteristic 2015/04/01 7 Update Luminous flux characteristic 2015/05/08 8 Revise CW Luminous flux characteristic 2015/06/02 About Edison Opto Edison Opto is a leading manufacturer of high power LED and a solution provider experienced in LDMS. LDMS is an integrated program derived from the four essential technologies in LED lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical Optimization, to provide customer with various LED components and modules. More Information about the company and our products can be found at Copyright 2015 Edison Opto. All rights reserved. No part of publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photo copy, recording or any other information storage and retrieval system, without prior permission in writing from the publisher. The information in this publication are subject to change without notice. For general assistance please contact: [email protected] For technical assistance please contact: [email protected] Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 8 17