Luckylight. 2mm Tower Type. White LED. Technical Data Sheet. Part No.: 204WM2A-W6-3N
|
|
- Philippa Higgins
- 7 years ago
- Views:
Transcription
1 2mm Tower Type White LED Technical Data Sheet Part No.: 24WM2A-W6-3N Spec No.: B1 X565 Rev No.: V.3 Date: Jun./2/28 Page: 1 OF 9
2 Features: 2mm Tower. Wide viewing angle=4. Available on tape and reel Emission color: X=.43, y=.4. Reliable and robust The product itself will remain within RoHS compliant Version. Descriptions: The series is specially designed for applications requiring higher brightness. The LED lamps are available with different colors. The white LED which was fabricated using a blue LED and a phosphor,and the phosphor is excited by blue light and emits yellow fluorescence.the mixture of blue light and yellow light results in white emission. Utilizing advanced InGaN chip technology. Applications: QA equipment. Backlighting of LCD. Automotive equipment. Replacement of conventional Light bulbs and fluorescent lamps. Indoor and out door displays, etc. Spec No.: B1 X565 Rev No.: V.3 Date: Jun./2/28 Page: 2 OF 9
3 Package Dimension: Part No. Chip Material Lens Color Source Color 24WM2A-W6-3N InGaN White Diffused Warm White Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±.25mm (.1 ) unless otherwise noted. 3. Protruded resin under flange is 1.mm (.39 ) max. 4. Specifications are subject to change without notice. Spec No.: B1 X565 Rev No.: V.3 Date: Jun./2/28 Page: 3 OF 9
4 Absolute Maximum Ratings at Ta=25 Parameters Symbol Max. Unit Power Dissipation PD 95 mw Peak Forward Current (1/1 Duty Cycle,.1ms Pulse Width) IFP 1 ma Forward Current IF 25 ma Reverse Voltage VR 5 V Electrostatic Discharge (HBM) ESD 4 V Operating Temperature Range Topr -4 to +85 Storage Temperature Range Tstg -4 to +1 Lead Soldering Temperature [4mm (.157 ) FromBody] Tsld 26 for 5 Seconds Electrical Optical Characteristics at Ta=25 Parameters Symbol Min. Typ. Max. Unit Test Condition Luminous Intensity IV mcd IF=2mA Viewing Angle 2θ1/ Deg IF=2mA Chromaticity Coordinates x y IF=2mA Forward Voltage VF V IF=2mA Reverse Current IR µa VR=5V Notes: 1. Luminous Intensity Measurement allowance is ± 1%. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. It use many parameters that correspond to the CIE X, Y, and Z are CIE values of Red, Green and Blue content of the measurement. Spec No.: B1 X565 Rev No.: V.3 Date: Jun./2/28 Page: 4 OF 9
5 Typical Electrical / Optical Characteristics Curves (25 Ambient Temperature Unless Otherwise Noted) Spectrum Distribution Forward Current & Forward Voltage Relative Luminous Intensity (%) Relative Luminous Intensity (%) Ta=25 C Wavelength λp (nm) Luminous Intensity & Ambient Temperature Ambient Temperature Ta ( ) Forward Current IF (ma) Luminous Intensity & Forward Current Relative Luminous Intensity (%) Ta=25 C Forward Voltage VF (V) Ta=25 f=1khz Duty=1/ Forward Current IF (ma) Forward Current IF (ma) Forward Current Derating Curve Ambient Temperature Ta ( ) Radiation Diagram o 1 o 2 o 3 o o 5 o 6 o 7 o 8 o 9 o Spec No.: B1 X565 Rev No.: V.3 Date: Jun./2/28 Page: 5 OF 9
6 Warm White CIE 1931 Chromaticity Diagram: Y (.553,.442).44 (.4529,.433) I1-4 I I1-2 I1-1 H1-4 (.413,.417).42 H1-3 I2-4 I2-3 H1-2 H1-1 I2-1 I H2-4 G1-3 H2-3 I3-4 H2-2 I3-3.4 I3-2 H2-1 I3-1 (.3647,.387) G1-2 H3-4 G2-3 H3-3 I H3-2 I4-3 G1-1 H3-1 I4-2 G2-2 I4-1 23K.38 H4-4 F1-3 G3-3 H4-3 (.4715,.3875) G2-1 H G3-2 H4-1 F1-2 29K (.3328,.36) F2-3 G4-3 (.4232,.374).36 F1-1 G3-1 F2-2 G4-2 35K F3-3 E1-3 (.3927,.3614).35 F2-1 G4-1 F3-2 E1-2 F E2-3 (.335,.3325) F3-1 E1-1 F4-2 45K E E3-3 F4-1 (.3559,.338) D1-3 E2-1 E3-2 E D1-2 D2-3 E3-1 55K (.281,.39) E D1-1 (.3319,.32) D2-2 D3-3 E4-1 C1-3 D2-1.3 D3-2 D4-3 C2-3 D3-1 D4-2 7K.29 C1-2 D4-1 (.395,.298) (.2556,2795) C2-2 C3-3 C C3-2 C4-3 C2-1 9K B1-3 C C3-1 (.2925,.283) B2-3 C B1-2 B3-3 B2-2 B4-3 14K.25 B3-2 (.23,.2428) B1-1 (.2731,2575) B4-2 B B3-1 A1-3 B A2-3 A3-3 A1-2 A4-3 4K A2-2 A (.2524,23) A4-2 A1-1 A2-1 A A4-1 (.21,.21) 7K.2 (.236,.25) W6: X Y (.4529,.433) I1-2 I1-3 I1-1 H1-4 (.413,.417) H1-3 I2-4 I2-3 H1-2 I2-2 H1-1 I2-1 H2-4 H2-3 I3-4 H2-2 I3-2 I3-3 H2-1 I3-1 H3-4 H3-3 I4-4 H3-2 I4-3 I4-2 H3-1 I4-1 23K H4-4 H4-3 (.4715,.3875) H4-2 H4-1 29K (.4232,.374) 35K (.3927,.3614) (.553,.442) X I1-4 Spec No.: B1 X565 Rev No.: V.3 Date: Jun./2/28 Page: 6 OF 9
7 Chromaticity Coordinates Specifications for Bin Rank: Bin Code Right x Right y Top x Top y Left x Left y Bottom x Bottom y H H H H H H H H H H H H H H H H I I I I I I I I I I I I I I I I Notes: 1. Color coordinates measurement allowance is ± One delivery will include up to two consecutive color ranks and three luminous intensity ranks of the products the quantity-ratio of the ranks is decided by Luckylight. Spec No.: B1 X565 Rev No.: V.3 Date: Jun./2/28 Page: 7 OF 9
8 Reliability Test Items And Conditions: The reliability of products shall be satisfied with items listed below: Confidence level: 9%. LTPD: 1%. 1) Test Items and Results: Standard Test Item Test Conditions Test Method Resistance to Soldering Heat Solder ability Thermal Shock Temperature Cycle Moisture Resistance Cycle High Temperature Storage Terminal Strength (Pull test) Terminal Strength (bending test) Temperature Humidity Storage Low Temperature Storage Steady State Operating Life Steady State Operating Life of High Humidity Heat Steady State Operating Life of Low Temperature Tsld=26±5, 1sec 4mm from the base of the epoxy bulb Tsld=235±5, 5sec(using flux) Note Number of Damaged 1time /1 1time over 95% /1 ~1 15sec, 15sec 1 cycles /1-4 ~25 ~1 ~25 3min,5min,3min,5min 25 ~65 ~-1 9%RH 24hrs/1cycle 1 cycles /1 1 cycles /1 Ta=1 1hrs /1 Load 1N (1kgf) 1±1sec Load 5N (.5kgf) ~9 ~ bend 2 times No noticeable damage No noticeable damage /1 /1 Ta=6, RH=9% 1hrs /1 Ta=-4 1hrs /1 Ta=25, IF=3mA 1hrs /1 Ta=6, RH=9%, IF=3mA 5hrs /1 Ta=-3, IF=3mA 1hrs /1 2) Criteria For Judging The Damage: Item Symbol Test Conditions Criteria for Judgment Min Max Forward Voltage VF IF=2mA --- F.V.*) 1.1 Reverse Current IR VR=5V --- F.V.*) 2. Luminous Intensity IV IF=2mA F.V.*) *) F.V.: First Value. Spec No.: B1 X565 Rev No.: V.3 Date: Jun./2/28 Page: 8 OF 9
9 Please read the following notes before using the product: 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 3 or less and 8%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 3 or less and 6%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 3. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 26 for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 4. Soldering When soldering, for Lamp without stopper type and must be leave a minimum of 3mm clearance from the base of the lens to the soldering point. To avoided the Epoxy climb up on lead frame and was impact to non-soldering problem, dipping the lens into the solder must be avoided. Do not apply any external stress to the lead frame during soldering while the LED is at high temperature. Recommended soldering conditions: Temperature Soldering Time Soldering Iron 3 Max. 3sec.Max. (one time only) Pre-heat Pre-heat Time Solder Wave Soldering Time Wave Soldering 1 Max. 6 sec. Max. 26 Max. 5sec.Max. Note: Excessive soldering temperature and / or time might result in deformation of the LED lens or catastrophic failure of the LED. 5. Repairing RepairshouldnotbedoneaftertheLEDshavebeensoldered.Whenrepairingisunavoidable,a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 6. Caution in ESD Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices equipment and machinery must be properly grounded. Spec No.: B1 X565 Rev No.: V.3 Date: Jun./2/28 Page: 9 OF 9
Preliminary. 5mm Round White LED T-1 3/4 Technical Data Sheet. Model :LL-504WC2E-W2
Preliminary 5mm Round White LED T-1 3/4 Technical Data Sheet Model :LL-504WC2E-W2 Spec No: ITO-ET00N Rev No:V.1 Date: Dec/05/2004 Page: 1 OF 10 Features Popular T-1 3/4 diameter package. Choice of various
More information0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B
.45mm Height 42 Package Pure Green Chip LED Technical Data Sheet Part No.: LL-S16PGC-G5-1B Spec No.: S16 Rev No.: V.2 Date: Dec./6/25 Page: 1 OF 9 Features: Package in 8mm tape on 7" diameter reel. Compatible
More informationLuckylight. 1.9mm (0.8") 8 8 White Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-20882XWB-Y
.9mm (.8") 8 8 White Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-88XWB-Y Spec No: W88C/D Rev No: V. Date: Sep// Page: OF Features:.8inch (.mm) Matrix height. Colors: White. Flat package
More information1.50mm Height 2220 Package Top View Full Color Chip LEDs Technical Data Sheet. Part No.: LL-R5050RGBC-001
.5mm Height 222 Package Top View Full Color Chip LEDs Technical Data Sheet Part No.: LL-R55RGBC- Spec No.: R55 Rev No.: V.2 Date: Mar./6/26 Page: OF 2 Features: P-LCC-6 package. White package. Optical
More informationLuckylight. 60.20mm (2.4") 8 8 RGB color Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-50884XRGBB
6.2mm (2.4") RGB color Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-54XRGBB Spec No: W23A/BRGB Rev No: V.2 Date:Sep//29 Page: OF 9 Features: 2.4inch (6.2mm) digit height. Excellent segment
More informationLuckylight. 3.0mm (1.2") 8 8 Super Yellow Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-30881XUYB
3.mm (.") 8 8 Super Yellow Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-388XUYB Spec No: W88A/B Rev No: V. Date:Sep/3/8 Page: OF 6 Features:.inch (3.mm) Matrix height. Colors: Super Yellow.
More information3.0*3.0mm (1.2") 8 8 Super Yellow Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-R30881XUYB
3.*3.mm (.2") 8 8 Super Yellow Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-R388XUYB Spec No: W288A/B Rev No: V.2 Date: Sep/8/27 Page: OF 6 Features:.2inch (3.7mm) Matrix height. Colors:Super
More information3.0mm (1.2") 8 8 Hyper Red Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-30881XVB
.mm (.") Hyper Red Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-XVB Spec No: WA/B Rev No: V. Date:Sep// Page of Features:.inch (.mm) Matrix height. Colors: Hyper Red. Flat package and light
More information1W High Power Purple LED Technical Data Sheet. Part No.: LL-HP60MUVA
1W High Power Purple LED Technical Data Sheet Part No.: LL-HP60MUVA Spec No.: HP60M Rev No.: V.2 Date: Aug./18/2009 Page: 1 OF 8 Features: Luckylight High power LED type. Lead frame type package (Heat
More information0.28" Quadruple Digit Numeric Displays. Technical Data Sheet. Model No.: KW4-281XSB
.28" Quadruple Digit Numeric Displays Technical Data Sheet Model No.: KW4-281XSB Spec No.:W2841C/D Rev No.: V.2 Date:Sep/3/29 Page: 1 OF 6 Features:.28 (inch) digit height. Excellent segment uniformity.
More informationHL-A-3528H308W-S1-13. Description. Applications. Recommended Soldering. Package Dimensions
RoHS Specification Client Name: Client P/N: Factory P/N: HL-A-3528H308W-S1-13 OF-SMD3528WN Sending Date: Client approval Hong li approval Approval Audit Confirmation Approval Audit Confirmation 殷 小 平 王
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Chip LED with Bi-Color (Multi-Color) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
More informationTechnical Data Sheet 2.0*5.0mm Rectangle Type LED Lamps
Features : Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free The product itself will remain within RoHS compliant version. Descriptions : The series is specially
More informationSPECIFICATION. PART NO. : MT0380-UV-A 5.0mm ROUND LED LAMP. 3Northway Lane North Latham,New York 12110.
3Northway Lane North Latham,New York 12110. Tollfree:1.800.984.5337 Phone:1.518.956.2980 Fax:1.518.785.4725 Http://www.marktechopto.com SPECIFICATION PART NO. : MT0380-UV-A LAMP ATTENTION OBSERVE PRECAUTION
More informationTechnical Data Sheet 3.0mm Round Type LED Lamps
Features : Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free Descriptions : The series is specially designed for applications requiring higher brightness The led
More informationNo. STSE-CW2163B <Cat.No.031110> SPECIFICATIONS FOR NICHIA WHITE LED MODEL : NSPW315BS NICHIA CORPORATION -0-
No. STSE-CW2163B SPECIFICATIONS FOR NICHIA WHITE LED MODEL : NSPW315BS -0- 1.SPECIFICATIONS (1) Absolute Maximum Ratings (Ta=25 C) Item Symbol Absolute Maximum Rating Unit Forward Current IF 30 ma Pulse
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0603 Package Chip LED (0.8 mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
More informationSPEC NO: DSAJ8637 REV NO: V.6B DATE: JUL/01/2016 PAGE: 1 OF 5 APPROVED:
1.0X0.5mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APHHS1005ZGC Green Features 1.0mmX0.5mm SMD LED, 0.5mm thickness. Low power
More information703-0148 InGaN / Sapphire White Water clear. Parameter Rating Unit
Package Dimensions: * All dimensions are in mm * Tolerance: ±.6mm unless otherwise noted. LED Chip Lens Colour Ant Part No. Material Colour Coordinates 73-148 InGaN / Sapphire White Water clear Absolute
More informationrred.com ieverred.com
1Features/ Emitting Color/Green/ Lens Type/Water Clear/ Device Outline/3.52.81.9mm RoHS compliant/ RoHS 2Applications/ Backlight for MobileMachine Vision LCD Display/ Backlight in Dashboard and switch
More information3W RGB High Power LED
Features: Super high flux output and high luminance Designed for high current operation Low thermal resistance No UV Package Dimensions: Typical Applications Reading lights Portable flashlight Uplighters
More information2016 Mid Power LED. 2016 Mid Power Product Datasheet. Features: Table of Contents. Applications
2016 Mid Power LED Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Diagram.... 5 Color Ranks.... 5 Features: High efficacy CRI Options:
More informationMP-1919 XNOVA Cube TM SMD LED
MP-1919 XNOVA Cube TM SMD LED Features: Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Binning.... 5 Chromaticity Diagram.... 6 Characteristic
More information3528 SMD LED. Applications. Signal & Symbol Indicators. Illuminations(illuminated advertising & general lighting). Amusement Machines.
Applications Signal & Symbol Indicators. Illuminations(illuminated advertising & general lighting). Amusement Machines. LCD Backlighting. Indoor & Outdoor Displays. Automobile Interior Lighting. Edition:
More informationSMD Low Power LED 61-238/XK2C-BXXXXXXXXXX/ET
SMD Low Power LED Features P-LCC-6 package Top view LED Wide viewing angle:120 High Luminous intensity High Efficacy Pb-free RoHS-compliant. Description The Everlight 61-238 package has high efficacy,
More informationTechnical Data Sheet 5.0mm Round Type LED Lamps
Features : Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free The product itself will remain within RoHS compliant version. Descriptions : The series is specially
More informationData Sheets of AVA Technology SMD Type White LED. Model : T5050. AVA Technology Co.
Data Sheets of AVA Technology SMD Type White LED Model : AVA Technology Co. 2640 S. Myrtle Ave. Suite 6 Monrovia, CA 91016 P: 626-574-7726 F: 626-574-7732 http://www.led4light.com Top View LED with Reflector
More informationSPECIFICATION. Topview 5550 SMD LED IWS 505-RB. Product : Topview 5550 SMD LED Part No : IWS-505-RB Customer : Date : 2007. 11. 10 Ver.1.0.
SPECIFICATION Product : Topview 555 SMD LED Part No : Customer : Date : 27.. Ver.. Customer : Approval Manufacturer : ITSWELL Co., LTD Proposed By Approval Comment Suwon Company : 442-9, 82 Uman Industrial
More informationEVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 0805 Package Chip LED Preliminary
Feature RoHS compliant. This is a preliminary specification Chip LED package. intended for design purposes and Colorless clear resin. Wide viewing angle 130 o. subject to change without prior Brightness:
More informationHarvatek Surface Mount LED Data Sheet. HT-F195 Series
Harvatek Surface Mount LED Data Sheet Official Product Product: Data Sheet No. Tentative Product **************** Jul. 15, 2005 Version of 1.4 Page 1/20 DISCLAIMER...3 PRODUCT SPECIFICATIONS...4 ATTENTION:
More information: 5050 White LED PKG. Specification Sheet
5050 White LED PKG Specification Sheet For General Lighting 1 / 12 _ 5050 White LED Specification Sheet Approved rank specification for NC LED Iv: Min 5,000mcd (500mcd Sorting) Vf: 3.0 ~ 3.4V (0.1V Sorting)
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFICTION SMD Type Size (mm):3.2*1.6*1.1 Emitting Color:White SMT package Suitable for all SMT assembly and soldering method Pb-free Reflow soldering application RoHS Compliant Features: Light
More informationSLLP-5630-150-G PRODUCT DATASHEET. RoHS Compliant
PRODUCT DATASHEET SLLP-5630-150-G Table of Contents Features... 1 Applications 1 Characteristics.. 1 Typical Electro optical Characteristics Curves... 3 Mechanical Dimensions... 4 Carrier Tape Dimensions.....
More informationEVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED 1W (Preliminary)
Technical Data Sheet High Power LED 1W (Preliminary) Features Feature of the device: small package with high efficiency Typical view angle: 150. Typical light flux output: 30 lm @ 350mA. ESD protection.
More information3mm Photodiode,T-1 PD204-6C/L3
3mm Photodiode,T-1 Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high
More informationPART NO.: L-C150SRCT REV: A / 4
PARA LIGHT ELECTRONICS CO., LTD. 4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan, R.O.C. Tel: 886-2-2225-3733 Fax: 886-2-2225-4800 E-mail: para@para.com.tw http://www.para.com.tw DATA SHEET
More information1W High Power LED. Features. Applications. Catalog
Features Highest flux per LED family in the world Very long operating life (up to 100k hours) Available in Red, Yellow, Green, Blue, White Lambertian radiation pattern More energy efficient than incandescent
More informationHarvatek Surface Mount LED Data Sheet HT-T167 Ultra-bright Reverse Gullwing Series
Harvatek Surface Mount LED Data Sheet HT-T167 Ultra-bright Reverse Gullwing Series Jul. 21, 2005 Version of 1.1 Page 1/22 DISCLAIMER...3 PRODUCT SPECIFICATIONS...4 LABEL SPECIFICATIONS...5 PRODUCT CHARACTERISTICS...10
More informationNichia STS-DA1-0774 <Cat.No.090427> SPECIFICATIONS FOR NICHIA UV NSHU591B MODEL : NICHIA CORPORATION
SPECIFICATIONS FOR NICHIA UV LED MODEL : NSHU591B 1.SPECIFICATIONS (1) Absolute Maximum Ratings (Ta=25 C) Item Symbol Absolute Maximum Rating Unit Forward Current IF 25 ma Pulse Forward Current IFP 80
More informationNo. 3, Gongye E. 3rd Road, Hsinchu Science Park, Hsinchu 30075, Taiwan TEL:886-3-565-8800. Lextar.com 50W-100W COB LED. Updated on 2012/010/11
Lextar.com 50W-100W COB LED Updated on 2012/010/11 Approval Sheet 50W COB LED Product Specification Product COB Part Number PB50H01 Customer Issue Date 2012/10 Feature LED COB Dice Technology : InGaN High
More informationSPECIFICATIONS FOR APPROVAL
CUSTOMER :. DATE : 2010. 12. 16. SPECIFICATIONS FOR APPROVAL PRODUCT NAME : Top View Type White SMD LED MODEL NAME : LEMWS59T80LZ00 APPROVAL REMARK APPENDIX Designed Checked Approved LG Innotek Co., Ltd.
More information1 W High Power LED TPLG-MR7171R-H11-0L0M. 1 W High Power Warm White LED. Features. Applications. Device Selection Guide
1 W High Power LED 1 W High Power Warm White LED Features InGaN technology High flux output Lambertian distribution pattern Flexible lens design Good reliability performance RoHS Compliance M7171 Applications
More information5W HI-POWER LED SPECIFICATION
5W HI-POWER LED SPECIFICATION HPG8b-495xWHCx Drawn by Checked by Approved by RoHS Conformity DATE:2013/4/9 REV:A HUEY JANN High Power 5W LED is made of GaInN chips with precise package technique which
More information30W Epistar 45mil Chip High Power LED
30W Epistar 45mil Chip High Power LED White:LEDE-P30-DH-White Warm White:LEDE-P30-DWH Features Long operating life Highest Luminous flux Wide range of colours:2500k-25000k Chip size: Epistar 45*45mil More
More informationSPECIFICATION FOR APPROVAL
LED Model No: WSD-5050A120RGBW-02 5050-RGBCW Commodity: Emission Color:RGB+Cool 5050 RGB+Pure SMD White Model Lens No: Appearance: 5050-RGB Water Clear Quality CUSTOMER & Safety APPROVED Certification:
More informationNo. STSE-CC5037A <Cat.No.050411> SPECIFICATIONS FOR NICHIA CHIP TYPE BLUE LED MODEL : NSSB100BT NICHIA CORPORATION -0-
No. STSE-CC5037A SPECIFICATIONS FOR NICHIA CHIP TYPE BLUE LED MODEL : NSSB100BT NICHIA CORPORATION -0- 1.SPECIFICATIONS (1) Absolute Maximum Ratings () Item Symbol Absolute Maximum Rating Unit Forward
More informationFeatures: Dimensional drawing: Shape Specification:
Features: High efficiency; Reliable and Robust; The product itself will remain within ROHS compliant; The series is specially designed for applications requiring higher brightness; The LED lamps are available
More informationHarvatek Surface Mount CHIP LED Data Sheet HT-380FCH-ZZZZ
Harvatek Surface Mount CHIP LED Data Sheet Official Product HT Part No. Customer Part No. Data Sheet No. Tentative Product **************** **************** May. 14, 2007 Version of 1.1 Page 1/15 DISCLAIMER...
More information1 W High Power LED TPLG-MR7171LS-H11-1G. 1 W High Power Warm White LED. Features. Applications. Device Selection Guide
1 W High Power LED 1 W High Power Warm White LED Features InGaN technology High flux output Lambertian distribution pattern Flexible lens design Good reliability performance RoHS Compliance M7171 Applications
More informationLumimicro 3528 One Chip Specification
Doc. No : LUMI 3528-2P- 05 08 17- SPEC 3528-2PIN-SMD LED White LED Customer Approval Model Issued Date LMFL2P35A1WHZ03 2005 08-17 Checked By Approved By Description SMD Type LED Written By Checked By Approved
More informationSpecification MBT801-S
Specification MBT801S Drawn SSC Approval 고객명 Approval.com MBT801S 1. Features 2. Absolute Maximum Ratings 3. Electro Characteristics 4. Optical characteristics 5. Outline Dimension 6. Packing 7. Soldering
More informationDATA SHEET PART NO. : L-314YD REV : A / 4
PARA LIGHT ELECTRONICS CO., LTD. 4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan, R.O.C. Tel: 886-2-2225-3733 Fax: 886-2-2225-4800 E-mail: para@para.com.tw http://www.para.com.tw DATA SHEET
More informationSMD LED Product Data Sheet LTST-S310F2KT Spec No.: DS22-2003-047 Effective Date: 10/30/2013 LITE-ON DCC RELEASE
SMD LED Product Data Sheet LTST-S310F2KT Spec No.: DS22-2003-047 Effective Date: 10/30/2013 Revision: E LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road,
More information3W High Power LED. Features. Applications. Catalog
Features Highest flux per LED family in the world Very long operating life (up to 100k hours) Available in Red, Yellow, Green, Blue, White Lambertian radiation pattern More energy efficient than incandescent
More informationData Sheet. HLMP-Yxxx T-1 (3 mm) AlInGaP LED Lamps. Description. Features. Applications. Package Dimension
HLMP-Yxxx T-1 (3 mm) AlInGaP LED Lamps Data Sheet Description This family of T-1 lamps is widely used in general purpose indicator and back lighting applications. The optical design is balanced to yield
More informationContents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18
Rev : 00 ISSUE NO : DATE OF ISSUE : 2009. 04. 10 S P E C I F I CATION MODEL : SLHNNWW629T1S0U0S0 [Rank : (S0), (U0), (S0)] HIGH POWER LED - SUNNIX6 CUSTOMER : CUSTOMER CHECKED CHECKED APPROVED SAMSUNG
More informationDOMINANT. Opto Technologies Innovating Illumination. InGaN White S-Spice : SSW-SLD DATA SHEET: SpiceLED TM. Features: Applications:
DATA SHEET: SpiceLED TM SpiceLED TM Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size
More informationSURFACE MOUNT LED LAMP STANDARD BRIGHT 0606
PACKAGE DIMENSIONS 0.075 (1.9) 0.063 (1.6) 0.035 (0.9) TOP 0.047 (1.2) 0.012 (0.3) 0.032 [0.8] SIDE 0.043 [1.1] 1 3 0.020 [0.5] 2 4 BOTTOM CATHODE MASK 1 2 3 4 HER / AlGaAs Red / Yellow (for-34) Green
More informationCDSX56F series. Package Dimensions. Package Package Dimensions. Package Dimensions. package dimensions. 0.56 Single Digit Seven Segment Display
American Opto Opto Plus Plus LED LED American A561X-5 G/W Opto G/W Plus LED American A561X-5 Opto G/W Plus LED 0.56 0.56 Single Single Digit Digit Seven Seven Segment Segment Display Display specifications
More informationTechnical Data Sheet 3mm Infrared LED, T-1
Technical Data Sheet 3mm Infrared LED, T-1 Features High reliability High radiant intensity Peak wavelength p=85nm 2.54mm Lead spacing Low forward voltage Pb free HIR24 Descriptions EVERLIGHT s infrared
More informationCree 5-mm Red and Amber Round LED C503B-RAS/RAN/AAS/AAN C503B-RBS/RBN/ABS/ABN C503B-RCS/RCN/ACS/ACN
PRODUCT FAMILY DATA SHEET Cree 5-mm Red and Amber Round LED CLD-CT1079.005 PRODUCT DESCRIPTION Round LEDs offer superior light output for excellent readability in sunlight and dependable performance. They
More information0.3 Dual A302X Digit Seven Segment Display 0.3 Dual Digit Seven Segment Display. package dimensions
specifications Package Dimensions Package Dimensions Package Dimensions Package Dimensions American American Opto Opto Plus Plus LED LED American American A302X Opto A302X Opto G/W Plus G/W Plus LED LED
More informationPower SMD LED PLCC-2 Plus
Power SMD LED PLCC-2 Plus 2238 DESCRIPTION The VLMW51.. white LED in PLCC-2 plus package is an advanced product in terms of high luminous flux and low thermal resistance. In combination with the small
More informationData Sheet. Nationstar LED
Data Sheet Nationstar LED 1 Table of Contents General Informations:... 3 Electrical and Flux Characteristics... 3 Color Wavelength Diagram:... 6 Mechanical Dimensions:... 7 Electrical Connection:... 7
More informationCree P4 LED CP42B-RKS CP42B-AKS
Cree P4 LED CP42B-RKS CP42B-AKS PRODUCT FAMILY DATA SHEET CLD-CT1133.001 PRODUCT DESCRIPTION This revolutionary package design allows the lighting designer to reduce the number of LEDs required and provide
More informationEdixeon S White Series Datasheet
Edixeon S White Series Datasheet Edixeon Series Features : Various colors More energy efficient than incandescent and most halogen lamps Low voltage operation Instant light Long operating life Copyright
More informationEdixeon S5 White Series Datasheet
Edixeon S5 White Series Datasheet Edixeon Series Features : Various colors for choice Low voltage operation Instant light Long operating life Reflow process compatible Copyright 2013 Edison Opto Corporation.
More informationHLMP-1600, HLMP-1601, HLMP-1620, HLMP-1621 HLMP-1640, HLMP-1641, HLMP-3600, HLMP-3601 HLMP-3650, HLMP-3651, HLMP-3680, HLMP-3681
HLMP-16, HLMP-161, HLMP-162, HLMP-1621 HLMP-16, HLMP-161, HLMP-36, HLMP-361 HLMP-365, HLMP-3651, HLMP-368, HLMP-3681 T 1 3 / (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet
More informationEVERLIGHT ELECTRONICS CO., LTD.
ECN : PAGE : 1/7 Features : Fast response time High photo sensitivity Small junction capacitance High reliability Description : is a high speed silicon NPN epitaxial planar phototransistor in a compact
More informationCree PLCC6 3 in 1 SMD LED SLV6A-FKB
Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1320.001 PRODUCT DESCRIPTION These SMD LEDs are packaged in an industry standard PLCC6 package. These high performance tricolor SMT LEDs are designed
More informationStandard 0603 SMD LED
TLMS, TLMO, TLMY, TLMG, TLMP, TLMB Standard 63 SMD LED DESCRIPTION 8562 The new 63 LED series have been designed in the smallest SMD package. This innovative 63 LED technology opens the way to smaller
More informationCHM-27 COB Arrays White LED
CHM-27 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Product Ordering & Shipping Part Numbers...4 Product Typical Flux Range. 5
More informationFeatures. Typical Applications G9. ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 1 DS-0042
ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 Features High Color rendering index Follow ANSI C78.788.2008 Chromaticity co-ordinates High flux per LED Good color uniformity Industry
More information50W EdiStar. Approved By Customer. Designer Checker Approval. Ultra High Power LED
Ultra High Power LED 50W EdiStar EdiStar Emitter Approved By Customer Designer Checker Approval Date:2006/12/04 Version:Preliminary V0.1 4F, No. 800, Chung-Cheng Rd, Chung-Ho, Taipei 235, Taiwan Tel: 886-2-8227-6996
More informationData Sheet. HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps. Description.
HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps Data Sheet Description These tinted diffused LED lamps are designed and optimized specifically
More informationAgilent T-1 3 / 4 (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet
Agilent T-1 3 / (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet HLMP-16, HLMP-161, HLMP-162, HLMP-1621 HLMP-16, HLMP-161, HLMP-36, HLMP-361 HLMP-365, HLMP-3651, HLMP-36, HLMP-361
More informationCree PLCC6 3-in-1 SMD LED CLP6C-FKB
PRODUCT FAMILY DATA SHEET CLD-CT933.002 Cree PLCC6 3-in-1 SMD LED PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.
More informationHLCP-J100, HDSP-4820, HDSP-4830 & HDSP-4832 10-Element Bar Graph Array. Features
HLCP-J, HDSP-, HDSP- & HDSP- -Element Bar Graph Array Data Sheet Description These -element LED arrays are designed to display information in easily recognizable bar graph form. The packages are end stackable
More informationUltrabright White LED, Ø 3 mm
Ultrabright White LED, Ø 3 mm DESCRIPTION The VLHW41 series is a clear, untinted 3 mm LED for high end applications where supreme luminous intensity is required. These lamps utilize the highly developed
More informationDiscontinued. LUXEON V Portable. power light source. Introduction
Preliminary Technical Datasheet DS40 power light source LUXEON V Portable Introduction LUXEON is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability
More informationWL-SWTC SMD White Top View Ceramic LED
A Dimensions: [mm] B Recommended land pattern: [mm] D Absolute Maximum Ratings (Ambient Temperature 25 C): Properties Test conditions Value Unit Power dissipation P Diss 2.52 W Peak Forward Current duty/10@1khz
More informationDOMINANT. Opto Technologies Innovating Illumination. 150 InGaN Warm White : NAF-BSG DATA SHEET : Primax TM. Features: Applications:
DATA SHEET : Primax TM 150 InGaN Warm White : NAF-BSG Primax TM Synonymous with function and performance, enter the Primax, the new era of high intensity illumination in LED. With its high flux output
More informationB Recommended land pattern: [mm] 2013-09-10. SSt. SSt. SSt. HOe 2013-05-14 2013-04-10. SSt. SSt. SSt 2012-12-10. SSt 2012-11-05. HOe. SSt.
A Dimensions: [mm] B Recommended land pattern: [mm] D Absolute Maximum Ratings (Ambient Temperature 25 C): Properties Test conditions Value Unit Power dissipation P Diss 105 mw Peak Forward Current duty/10@1khz
More informationSpecification MWT801-S
Specification MWT801S Drawn SSC Approval Customer Approval.com MWT801S 1. Features 2. Absolute Maimum Ratings 3. Electro Characteristics 4. Optical characteristics 5. CIE Chromaticit Diagram 6. Outline
More informationP2O LED. High Power LED PRODUCT DATASHEET. Introduction. RoHS Compliant
P2O LED High Power LED Introduction The P2O LEDs from SemiLEDs utilize innovative MvpLED technology which delivers superior levels of optical performance and reliability. Use of state of the art silicone
More informationStandard SMD LED PLCC-2
Standard SMD LED PLCC-2 19225 DESCRIPTION This device has been designed to meet the increasing demand for white SMD LED. The package of the VLMW41.. is the PLCC-2. It consists of a lead frame which is
More informationP2N LED. High Power LED PRODUCT DATASHEET. Introduction. RoHS Compliant
PRODUCT DATASHEET P2N LED High Power LED Introduction The P2N LED brings industry leading technology to the solid state lighting market with its high quality and performance. With a silicone lens, P2N
More informationEMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 16290(LED TYPES) EXAMINED BY : FILE NO. CAS-10251 ISSUE : JUL.03,2001 TOTAL PAGE : 7
EXAMINED BY : FILE NO. CAS-10251 EMERGING DISPLAY ISSUE : JUL.03,2001 APPROVED BY: TECHNOLOGIES CORPORATION TOTAL PAGE : 7 VERSION : 1 CUSTOMER ACCEPTANCE SPECIFICATIONS MODEL NO. : 16290(LED TYPES) FOR
More informationLZC-00MC40. LedEngin, Inc. High Luminous Efficacy RGB LED Emitter. Key Features. Typical Applications. Description
Key Features High Luminous Efficacy RGB LED Emitter LZC-MC4 Ultra-bright, Ultra-compact 4W RGB LED Full spectrum of brilliant colors with superior color mixing Small high density foot print 9.mm x 9.mm
More informationCree 5mm Round LED C503B-WAN
PRODUCT FAMILY DATA SHEET CLD-CT876.002 Cree 5mm Round LED PRODUCT DESCRIPTION Round LEDs offer superior light output for excellent readability in sunlight and dependable performance. They provide extremely
More informationLow Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
More informationTLRK1100C(T11), TLRMK1100C(T11), TLSK1100C(T11), TLOK1100C(T11), TLYK1100C(T11)
TOSHIBA LED Lamps TL(RK,RMK,SK,OK,YK)C(T) TLRKC(T), TLRMKC(T), TLSKC(T), TLOKC(T), TLYKC(T) Panel Circuit Indicators Unit: mm Surface-mount devices.2 (L) mm 2.8 (W) mm.9 (H) mm Flat-top type InGaAlP LEDs
More informationLUXEON S. High Flux Density
LUXEON S Optimized solution for applications requiring high flux and tight beam control Technical Datasheet DS80 LUXEON S High Flux Density Introduction The LUXEON S emitters deliver uniform beam intensity
More informationData Sheet. HCMS-235x CMOS Extended Temperature Range 5 x 7 Alphanumeric Display. Features. Description. Typical Applications
HCMS-235x CMOS Extended Temperature Range 5 x 7 Alphanumeric Display Data Sheet Description This sunlight viewable 5 x 7 LED four-character display is contained in 12 pin dual-in-line packages designed
More informationLow Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
More informationAmbient Light Sensor DIP 5mm T-1 3/4 EAALST05RDMA0
Features Close responsively to the human eye spectrum Light to Current, analog output Good output linearity across wide illumination range Low sensitivity variation across various light sources Guaranteed
More informationCree 5-mm Round LED C503C-WAS/WAN
Cree 5-mm Round LED PRODUCT FAMILY DATA SHEET CLD-CT1098.008 PRODUCT DESCRIPTION Round LEDs offer superior light output for excellent readability in sunlight and dependable performance. They provide extremely
More informationStandard SMD LED PLCC-2
Standard SMD LED PLCC-2 DESCRIPTION 948553 This device has been designed for applications requiring narrow brightness and color selection. The package of this device is the PLCC-2. It consists of a lead
More informationCree PLCC4 SMD LED CLA2A-WKW
PRODUCT FAMILY DATA SHEET CLD-CT931.002 Cree PLCC4 SMD LED PRODUCT DESCRIPTION SMD LEDs is packaged in the industry standard package. These LEDs have high reliability performance and are designed to work
More informationCree PLCC6 3 in 1 SMD LED CLY6C-FKC
Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1323.005 PRODUCT DESCRIPTION This SMD LED features an IPx8 water resistant rating in a PLCC6 package. These high performance tricolor SMT LEDs
More information