SOLAR PUMPING SYSTEM

Transcription

1 SOLAR PUMPING SYSTEM

2 SOLAR PUMPING SYSTEM Continuous data connection for remote telemetry made available via a RS-485 port. IP55, NEMA 3 rated enclosure for outdoor use. Easy to read, 3 digit, 7 segment LED display. Provides ease of programming and troubleshooting. Push button navigation for ease of programming and display control. Sliding door protects display from wildlife and environmental abuse. DC and AC power supply input. Automatic switching to AC generator backup power if no DC is available from the solar array. Contacts for up to two level control switches (can also operate from a pressure switch, used for long pipe runs). TRIP contact for flow switch to detect dry run conditions and protect the motor. Removable bottom gland plate makes conduit installation simple. Robust enclosure made of 1.9 and 1.5mm (14 and 16 gauge) zinc-plated and powder coated steel to stand up to the toughest environmental conditions. Applications Livestock watering Tank/Cistern filling Wildlife refuge & game farms Rural water supply for villages & homesteads Irrigation systems Fountains Vineyards Renewable energy projects Built-in Diagnostics and Protection The SubDrive Solar QuickPAK products include diagnostic features and built-in protection from potentially harmful conditions. Surge Short circuit Underload Overheated controller Undervoltage Dry run Locked pump Reverse polarity Open circuit

3 System Solutions All-in-One Package The SubDrive Solar QuickPAK is the System Solution to your solar pumping requirements. Using Franklin quality components, our technical expertise in groundwater pumping, and innovative thinking based on global market inputs, we have developed a rugged, high-output system which tackles the challenges of remote and harsh environments. No other system delivers the features, benefits, and reliability of SubDrive Solar QuickPAK in just one package! The SubDrive QuickPAK includes: Franklin Solar motor Franklin Solar pump SubDrive Solar controller Flow switch with 1m cable Variety of flow rates available in: 3, 45, 7, 15, and 27 lpm (1, 15, 25, 45, and 9 USGPM) Motor and drive ratings available in: 1.1 and 2.2 kw (1.5 and 3. hp) Features High flow system for faster tank fill and significant water output Proven motor and pump technology and reliability Robust IP55, NEMA 3 drive enclosure minimizes impact of wildlife, insects, dust, and weather DC and AC power inputs with auto-switching to generator back-up Seven segment controller display shows real-time input watts and system status Remote telemetry capability through a RS-485 continuous data port MPPT Max Power Point Tracking for maximizing efficiency of input power Soft start feature prevents water hammer and increases system life Allows use of new solar array or retrofit to existing array (subject to size and performance check) Simple installation and no required maintenance Built-in diagnostics and protection C-tick and UL approved 1

4 Ordering Information Contents SubDrive Solar QuickPAK Ordering Information...2 SubDrive Solar QuickPAK 1.1 kw Performance SubDrive Solar QuickPAK 2.2 kw Performance Dimensions...13 Drive Specifications...14 Quick Install Guide...15 Model Number Description XXX SS QP - X.XKW Motor Rating: 1.1, or 2.2 kw (1.5 or 3. hp) QuickPAK SubDrive Solar Pump Flow: 3, 45, 7, 15, or 27 lpm (1, 15, 25, 45, or 9 USGPM) SubDrive Solar QuickPAK Model Numbers Solar QuickPAK SubDrive Solar Controller Solar Pump BSPP Solar Motor Flow Switch BSPP Order No. QuickPAK Model Drive Model Part No. LPM USGPM Solar Pump Part No. kw Part No. Model Part No SSQP-1.1 kw SD Solar 1.1 kw N SL15S4-PEXB S C SSQP-2.2 kw SD Solar 2.2 kw N SL15S4-PEXB C SSQP-1.1 kw SD Solar 1.1 kw N SL15S4-PEXB S C SSQP-2.2 kw SD Solar 2.2 kw N SL15S4-PEXB C SSQP-1.1 kw SD Solar 1.1 kw N SL15S4-PEXB S C SSQP-2.2 kw SD Solar 2.2 kw N SL15S4-PEXB C (a) 15SSQP-1.1 kw SD Solar 1.1 kw N SL15S4-PEXB S F (a) 15SSQP-2.2 kw SD Solar 2.2 kw N SL15S4-PEXB F (a) 27SSQP-1.1 kw SD Solar 1.1 kw N SL15S4-PEXB S F (a) 27SSQP-2.2 kw SD Solar 2.2 kw N SL15S4-PEXB F Solar QuickPAK SubDrive Solar Controller Solar Pump NPT Solar Motor Flow Switch NPT Order No. QuickPAK Model Drive Model Part No. USGPM LPM Solar Pump Part No. kw Part No. Model Part No SSQP-1.5 hp SD Solar 1.1 kw N SL15S4-PEX S C SSQP-3. hp SD Solar 2.2 kw N SL15S4-PEX C SSQP-1.5 hp SD Solar 1.1 kw N SL15S4-PEX S C SSQP-3. hp SD Solar 2.2 kw N SL15S4-PEX C SSQP-1.5 hp SD Solar 1.1 kw N SL15S4-PEX S C SSQP-3. hp SD Solar 2.2 kw N SL15S4-PEX C (a) 45SSQP-1.5 hp SD Solar 1.1 kw N SL15S4-PEX S F (a) 45SSQP-3. hp SD Solar 2.2 kw N SL15S4-PEX F (a) 9SSQP-1.5 hp SD Solar 1.1 kw N SL15S4-PEX S F (a) 9SSQP-3. hp SD Solar 2.2 kw N SL15S4-PEX F * A 1 meter (~33 foot) cable for use with the flow switch is included in the controller packaging ** 316SS Motors available on request (a) High capacity pumps, 15 lpm (45 USGPM) and higher, in a QuickPAK are not supplied with an internal check valve. 2

5 Pump Performance 3SSQP-1.1 kw SubDrive Solar 1.1 kw, 3 lpm Pump End, 1.1 kw Motor m (57 psi) 6m (85 psi) m (114 psi) 1 FLOW (LITERS/MINUTE) m (142 psi) 12m (17 psi) 14m (199 psi) FLOW (US GALLONS/MINUTE) PV POWER (WATTS) PV Power (Watts) Head (m) * 1 bar = 1.2 meters of head **Refer to Drive Specifications table on page 14 for PV source power and voltage recommended operating ranges 3

6 Pump Performance 45SSQP-1.1 kw SubDrive Solar 1.1 kw, 45 lpm Pump End, 1.1 kw Motor 8 7 4m (57 psi) 2 FLOW (LITERS/MINUTE) m (85 psi) 8m (114 psi) 1m (142 psi) 12m (17 psi) 14m (199 psi) 15 1 FLOW (US GALLONS/MINUTE) PV POWER (WATTS) PV Power (Watts) Head (m) * 1 bar = 1.2 meters of head **Refer to Drive Specifications table on page 14 for PV source power and voltage recommended operating ranges 4

7 Pump Performance 7SSQP-1.1 kw SubDrive Solar 1.1 kw, 7 lpm Pump End, 1.1 kw Motor FLOW (LITERS/MINUTE) m (28 psi) 3m (43 psi) 4m (57 psi) 5m (71 psi) 6m (85 psi) 7m (1 psi) 8m (114 psi) 9m (128 psi) FLOW (US GALLONS/MINUTE) PV POWER (WATTS) PV Power (Watts) Head (m) * 1 bar = 1.2 meters of head **Refer to Drive Specifications table on page 14 for PV source power and voltage recommended operating ranges 5

8 Pump Performance 15SSQP-1.1 kw SubDrive Solar 1.1 kw, 15 lpm Pump End, 1.1 kw Motor m (14 psi) 15m (21 psi) 2m (28 psi) m (36 psi) 4 FLOW (LITERS/MINUTE) m (43 psi) 35m (5 psi) 4m (57 psi) 45m (64 psi) 3 2 FLOW (US GALLONS/MINUTE) PV POWER (WATTS) PV Power (Watts) Head (m) * 1 bar = 1.2 meters of head **Refer to Drive Specifications table on page 14 for PV source power and voltage recommended operating ranges 6

9 Pump Performance 27SSQP-1.1 kw SubDrive Solar 1.1 kw, 27 lpm Pump End, 1.1 kw Motor FLOW (LITERS/MINUTE) m (14 psi) 15m (21 psi) 2m (28 psi) FLOW (US GALLONS/MINUTE) PV POWER (WATTS) PV Power (Watts) Head (m) * 1 bar = 1.2 meters of head **Refer to Drive Specifications table on page 14 for PV source power and voltage recommended operating ranges 7

10 Pump Performance 3SSQP-2.2 kw SubDrive Solar 2.2 kw, 3 lpm Pump End, 2.2 kw Motor FLOW (LITERS/MINUTE) m (57 psi) 6m (85 psi) 8m (114 psi) 1m (142 psi) 12m (17 psi) 14m (199 psi) 16m (227 psi) 18m (256 psi) 2m (284 psi) FLOW (US GALLONS/MINUTE) PV POWER (WATTS) PV Power (Watts) Head (m) * 1 bar = 1.2 meters of head **Refer to Drive Specifications table on page 14 for PV source power and voltage recommended operating ranges 8

11 Pump Performance 45SSQP-2.2 kw SubDrive Solar 2.2 kw, 45 lpm Pump End, 2.2 kw Motor FLOW (LITERS/MINUTE) m (57 psi) 6m (85 psi) 8m (114 psi) 1m (142 psi) 12m (17 psi) 14m (199 psi) 16m (227 psi) 18m (256 psi) 2m (284 psi) FLOW (US GALLONS/MINUTE) PV POWER (WATTS) PV Power (Watts) Head (m) * 1 bar = 1.2 meters of head **Refer to Drive Specifications table on page 14 for PV source power and voltage recommended operating ranges 9

12 Pump Performance 7SSQP-2.2 kw SubDrive Solar 2.2 kw, 7 lpm Pump End, 2.2 kw Motor FLOW (LITERS/MINUTE) m (57 psi) 6m (85 psi) 8m (114 psi) 1m (142 psi) 12m (171 psi) 14m (2 psi) FLOW (US GALLONS/MINUTE) PV POWER (WATTS) PV Power (Watts) Head (m) * 1 bar = 1.2 meters of head **Refer to Drive Specifications table on page 14 for PV source power and voltage recommended operating ranges 1

13 Pump Performance 15SSQP-2.2 kw SubDrive Solar 2.2 kw, 15 lpm Pump End, 2.2 kw Motor 3 FLOW (LITERS/MINUTE) m (14 psi) 15m (21 psi) 2m (28 psi) 25m (36 psi) 3m (43 psi) 35m (5 psi) 4m (57 psi) 45m (64 psi) 5m (71 psi) 55m (78 psi) 6m (85 psi) FLOW (US GALLONS/MINUTE) PV POWER (WATTS) PV Power (Watts) Head (m) * 1 bar = 1.2 meters of head **Refer to Drive Specifications table on page 14 for PV source power and voltage recommended operating ranges 11

14 Pump Performance 27SSQP-2.2 kw SubDrive Solar 2.2 kw, 27 lpm Pump End, 2.2 kw Motor FLOW (LITERS/MINUTE) m (14 psi) 15m (21 psi) 2m (28 psi) 25m (36 psi) 3m (43 psi) 35m (5 psi) FLOW (US GALLONS/MINUTE) PV POWER (WATTS) PV Power (Watts) Head (m) * 1 bar = 1.2 meters of head **Refer to Drive Specifications table on page 14 for PV source power and voltage recommended operating ranges 12

15 Dimensions A B D C G.1 G.2 F E SubDrive Solar Controller Dimensions A B C D E F G.1 G.2 Centimeters Inches A B C Solar PMA Dimensions A B C lpm USGPM kw hp Stages Discharge mm inches mm inches mm inches /4" /4" /4" " " /4" /4" /4" " " Note: Maximum diameter across cable guard is 99.1 mm (3.9") on all models. 13

16 Drive Specifications SubDrive Solar Controller Specifications 1.1 kw model 2.2 kw model Controller Model No General Output voltage, max 2 V AC, 3-phase 2 V AC, 3-phase Max Amps (RMS) 6.8 A, each phase 12.5 A, each phase Output Frequency 3-58 Hz 3-68 Hz Efficiency at Max Power 96% 96% PV Source Input Voltage, at mpp 15* 33 V DC 15* 33 V DC Max Amps Input 7 A DC, continuous 12 A DC, continuous Power at mpp 5 2 watts watts Alternate AC Generator Input voltage 23 V AC, single-phase 23 V AC, single-phase Max Amps (RMS) 16 A 25 A Power and VA capability For Use With Follow Instruction Manual for proper Generator Sizing Data Follow Instruction Manual for proper Generator Sizing Data SubDrive Solar Motor S** ** SubDrive Solar Pumps (BSPP) SubDrive Solar Pumps (NPT) lpm USGPM Controller Size L X W X D L X W X D Centimeters (53.34 X X 21.87cm) (53.34 X X 26.31cm) Inches (21." X 1.19" X 8.61") (21." X 1.19" X 1.36") Weight Operating Conditions Temperature Range 19 kg (41 lbs) 22 kg (47 lbs) -25 C to 5 C (4 C max when using AC generator) -25 C to 5 C (4 C max when using AC generator) Relative Humidity Range to 1% Condensing to 1% Condensing * Drive will attempt to pump with input voltage as low as 15 V DC, and will maintain logic functions at even lower voltage. However, 15 V DC should not be interpreted as an adequate rated PV array output voltage for any installation. ** Motor model without lead - The lead is provided in the QuickPAK carton. Contact local FE office for lead replacement part numbers 14

17 Programming Header System Quick Install Guide DC Power Solar PV Array Alternate AC Power (Optional) SubDrive Solar Controller 3A - 2 Pole DC Rated Disconnect COMM. COMM. STATUS UP MENU SELECT DOWN , , 4-2mA -5VDC 4-2mA OUT SOLAR SUBMERSIBLE PUMP CONTROLLER DC Polarity Green = OK E1 E2 E3 E4 E5 E6 E7 Motor Under Locked External Open Short Overheated Red = Reversed Underloaded Voltage Pump Circuit Circuit Controller Running Power On Suitable for use on a circuit capable of delivering not more than 5 rms symmetrical amperes, 25V COM maximum. Use 9 ºC CU wire rate 3V min. Tighten line terminals to 15 in-lbs. NC NO + - L1 L2 BLK RED YEL RUN STOP TRIP SOLAR PRIMARY BACKUP DC AC MOTOR E8 Internal Error Pump/Motor Flow Switch (required for operation) Level Control Stop (OPEN) (CLOSED) Level Control Run (OPEN) (CLOSED) 2 Level Control Switch Operation Trip 15

18 16 Notes

19 SOLAR PUMPING SYSTEM SubDrive Solar and QuickPAK Selector: Franklin s user-friendly Solar SubDrive QuickPAK Selector helps you determine the optimal system for your solar project. Simply input your location, duty requirements, and solar panel characteristics (if known) and the system will automatically recommend the Solar QuickPAK model and array configuration best for your application. * Above screen shot is illustrative only and is subject to continuous improvement The Franklin Electric SubDrive Solar Selector and other information on our series of solar products can be found on Franklin Electric s Solar Website:

20 ASEAN Franklin Electric (SEA) Pte. Ltd. Singapore Representative Office 1 Changi Business Park Avenue 1 # 3-1, Ultro Building Singapore Phone: Fax: CHINA Franklin Electric (Shanghai) Co. Ltd. Unit 12-3, Shanghai Central Plaza No. 227, Huang Pi Bei Road, Shanghai 23, China Phone: Fax: INDIA Franklin Electric India Pvt. Ltd. DBS-26, 1st Floor World Trade Tower Barakhamba Avenue New Delhi 11 1, India Tel: Fax: KOREA Franklin Electric Korea 9th Floor Heraffice Building SaDang-dong DongJak-gu, Seoul , Republic of Korea Phone: Fax: SOUTH AFRICA Franklin Electric South Africa (Pty) Limited P.O. Box 8136, Edengie, Engwena Road, Sebenza, Edenvale, 161 South Africa Phone: Fax: AUSTRALIA / NEW ZEALAND Franklin Electric (Australia) Pty. Ltd Micro Circuit Dandenong South, Victoria 3175 Australia Phone: Fax: Hotline: 1.3 FRANKLIN ( ) EUROPE/MID-EAST/N. AFRICA Franklin Electric Europa GmbH Rudolf-Diesel-Straße 2 D Wittlich, Germany Phone: Fax: JAPAN Franklin Electric International, Inc. Aoba Bldg. 4F , Sugamo Toshima-Ku, Tokyo 17-2, Japan Phone: Fax: LATIN AMERICA Motores Franklin S.A. de C.V. Avenida Churubusco #16 (Bodega #16) Col. Francisco I. Madero Monterrey, N.L. Mexico C.P Phone: Fax: UNITED STATES Franklin Electric Co., Inc. 4 E. Spring St., Bluffton, IN USA Phone: Fax: M