STRAUMANN DENTAL IMPLANT SYSTEM RESToRATIVE SELECTION GUIDE

Transcription

1 STRAUMANN DENTAL IMPLANT SYSTEM RESToRATIVE SELECTION GUIDE

2 The ITI (International Team for Implantology) is academic partner of Institut Straumann in the areas of research and education.

3 RESTORATIVE SELECTION GUIDE Straumann Bone Level Prosthetics Single Crown 1 Bridge 4 Removable 7 Straumann Tissue Level Prosthetics Single Crown 10 Bridge 13 Removable 15

4 BONE LEVEL SINGLE CROWN Description BONE LEVEL REGULAR CONNECTION Gold abutment Straumann CADCAM abutment, ZrO 2 RC Straumann Anatomic IPS e.max 0 Final RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max Screw Retained RC Straumann Anatomic IPS e.max 15 RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 15 RC Straumann Anatomic IPS e.max short/ long BONE LEVEL NARROW CONNECTION Gold abutment, crown Straumann CADCAM abutment, ZrO short/ long IPS e.max is a registered trademark of Ivoclar Vivadent, AG.

5 Description BONE LEVEL REGULAR CONNECTION RC Anatomic abutment 0 GH 2.0 mm RC Anatomic abutment 0 GH 3.5 mm RC Anatomic abutment 15 GH 2.0 mm RC Anatomic abutment 15 GH 3.5 mm Final / Meso abutment Gold abutment, crown cement retained Straumann CADCAM abutment, ZrO 2 Straumann CADCAM abutment, Ti RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 15 RC Straumann Anatomic IPS e.max 15 RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 15 RC Straumann Anatomic IPS e.max 15 D 5.0 mm, GH 1.0 mm, AH 4.0 mm, crown short/ long D 5.0 mm, GH 2.0 mm, AH 4.0 mm, crown D 5.0 mm, GH 3.0 mm, AH 4.0 mm, crown D 5.0 mm, GH 1.0 mm, AH 5.5 mm, crown D 5.0 mm, GH 2.0 mm, AH 5.5 mm, crown D 5.0 mm, GH 3.0 mm, AH 5.5 mm, crown D 6.5 mm, GH 1.0 mm, AH 4.0 mm, crown D 6.5 mm, GH 2.0 mm, AH 4.0 mm, crown D 6.5 mm, GH 3.0 mm, AH 4.0 mm, crown D 6.5 mm, GH 1.0 mm, AH 5.5 mm, crown D 6.5 mm, GH 2.0 mm, AH 5.5 mm, crown D 6.5 mm, GH 3.0 mm, AH 5.5 mm, crown Bone-Level Cementable All-In-One Sets contain cementable abutment, screw, analog, burnout coping, impression cap and protective cap.

6 BONE LEVEL SINGLE CROWN (continued) Description NARROW CONNECTION NC Anatomic abutment 0 GH 2.0 mm NC Anatomic abutment 0 GH 3.5 mm NC Anatomic abutment 15º GH 2.0 mm Final / NC Anatomic abutment 15º GH 3.5 mm short/ long Meso abutment Gold abutment cement retained Straumann CADCAM abutment, ZrO 2 Straumann CADCAM abutment, Ti NC Cementable All-In-One Set, D 3.5 mm, GH 1.0 mm, AH 4.0 mm, crown NC Cementable All-In-One Set, D 3.5 mm, GH 2.0 mm, AH 4.0 mm, crown NC Cementable All-In-One Set, D 3.5 mm, GH 3.0 mm, AH 4.0 mm, crown NC Cementable abutment, D 3.5 mm, GH 1.0 mm, AH 5.5 mm/ NC Cementable abutment, D 3.5 mm, GH 2.0 mm, AH 5.5 mm/ NC Cementable abutment, D 3.5 mm, GH 3.0 mm, AH 5.5 mm/ / plastic / plastic / plastic NC Cementable All-In-One Set, D 5.0 mm, GH 1.0 mm, AH 4.0 mm, crown NC Cementable All-In-One Set, D 5.0 mm, GH 2.0 mm, AH 4.0 mm, crown NC Cementable All-In-One Set, D 5.0 mm, GH 3.0 mm, AH 4.0 mm, crown NC Cementable All-In-One Set, D 5.0 mm, GH 1.0 mm, AH 5.5 mm, crown NC Cementable All-In-One Set, D 5.0 mm, GH 2.0 mm, AH 5.5 mm, crown NC Cementable All-In-One Set, D 5.0 mm, GH 3.0 mm, AH 5.5 mm, crown

7 BONE LEVEL BRIDGE Description Final / REGULAR CONNECTION Gold abutment, bridge short/ long D 4.5 mm, H 1.0 mm/ / gold or plastic D 4.5 mm, H 2.5 mm/ / gold or plastic D 4.5 mm, H 4.0 mm/ / gold or plastic D 6.5 mm, H 1.0 mm/ / gold or plastic D 6.5 mm, H 2.5 mm/ / gold or plastic D 6.5 mm, H 4.0 mm/ / gold or plastic Screw Retained RC Multi-Base abutment 25º A/ RC Multi-Base abutment 25º B/ NARROW CONNECTION / gold or plastic / gold or plastic D 3.5 mm, H 1.0 mm/ / gold plastic D 3.5 mm, H 2.5 mm/ / gold plastic D 3.5 mm, H 4.0 mm/ / gold plastic D 4.5 mm, H 1.0 mm/ / gold plastic D 4.5 mm, H 2.5 mm/ / gold plastic D 4.5 mm, H 4.0 mm/ / gold plastic NC Multi-Base abutment 25º A/ / gold plastic NC Multi-Base abutment 25º B/ / gold plastic 4

8 BONE LEVEL BRIDGE (continued) Description REGULAR CONNECTION RC Anatomic abutment 0 GH 2.0 mm RC Anatomic abutment 0 GH 3.5 mm RC Anatomic abutment 15 GH 2.0 mm RC Anatomic abutment 15 GH 3.5 mm Final / CEMENT Retained Meso abutment Straumann CADCAM abutment, ZrO 2 Straumann CADCAM abutment, Ti RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 15 RC Straumann Anatomic IPS e.max 15 RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 15 RC Straumann Anatomic IPS e.max short/ long Gold abutment, bridge short/ long

9 Description NARROW CONNECTION Final / CEMENT Retained NC Anatomic abutment 0 GH 2.0 mm NC Anatomic abutment 0 GH 3.5 mm NC Anatomic abutment 15º GH 2.0 mm NC Anatomic abutment 15º GH 3.5 mm short/ long Meso abutment Gold abutment Straumann CADCAM abutment, ZrO 2 Straumann CADCAM abutment, Ti 6

10 BONE LEVEL REMOVABLE Description REGULAR CONNECTION Final / Gold abutment, bridge short/ long D 4.5 mm, H 1.0 mm/ D 4.5 mm, H 2.5 mm/ D 4.5 mm, H 4.0 mm/ D 6.5 mm, H 1.0 mm/ D 6.5 mm, H 2.5 mm/ D 6.5 mm, H 4.0 mm/ RC Multi-Base abutment 25º A/ RC Multi-Base abutment 25º B/ RC abutment for bars, Gold / gold/ plastic or Ti / gold/ plastic or Ti / gold/ plastic or Ti / gold/ plastic or Ti / gold/ plastic or Ti / gold/ plastic or Ti / gold/ plastic or Ti / gold/ plastic or Ti BAR short/ RC abutment for bars, Ti long Connection Bars Dolder bar, mini/matrix / Dolder bar, regular/matrix / NARROW CONNECTION D 3.5 mm, H 1.0 mm/ D 3.5 mm, H 2.5 mm/ D 3.5 mm, H 4.0 mm/ D 4.5 mm, H 1.0 mm/ D 4.5 mm, H 2.5 mm/ D 4.5 mm, H 4.0 mm/ NC Multi-Base abutment 25º A/ / plastic/ Gold or Ti / plastic/ Gold or Ti / plastic/ Gold or Ti / plastic/ Gold or Ti / plastic/ Gold or Ti / plastic/ Gold or Ti / plastic/ Gold/ Ti NC Multi-Base abutment 25º B/ / plastic/ Gold/ Ti NC for Bars, Gold NC for Bars, Ti short/ long

11 Description REGULAR CONNECTION RC LOCATOR, AH 1.0 mm Final RC LOCATOR, AH 2.0 mm RC LOCATOR, AH 3.0 mm RC LOCATOR, AH 4.0 mm V RC LOCATOR, AH 5.0 mm RC LOCATOR, AH 6.0 mm NARROW CONNECTION NC LOCATOR, AH 2.0 mm NC LOCATOR, AH 3.0 mm LOCATOR NC LOCATOR, AH 4.0 mm V NC LOCATOR, AH 5.0 mm NC LOCATOR, AH 6.0 mm Components for denture LOCATOR male processing package V2 Clear, 5 lbs V4 Pink, 3 lbs V4 Blue, 1.5 lbs V4 LOCATOR male processing package, extended range V2 Green, 3 4 lbs V4 Orange, 2 lbs V4 Red, 1.5 lbs V4 Grey, 0 lbs V coping V4 Block-out spacer V20 Processing male V4 Processing Spacer V4 Holder V4 8 LOCATOR is a registered trademark of Zest Anchors, Inc.

12 STRAUMANN PROSTHETICS For both tissue-level and bone-level implants, Straumann offers a broad range of standard and custom abutments in a range of materials, heights, diameters and angulations. PROSTHETIC SIMPLICITY n All-In-One Sets package compatible components in a single kit n One restorative kit for bone-level and tissue-level implants n Color-coded prosthetic components for easy reference n Prosthetic planning kits let you plan the ideal esthetics for your patients designed for a Secure, Precise Fit Morse Taper and CrossFit Connection n Morse taper connection to Straumann tissue-level implants provides a secure, frictional fit n CrossFit Connection is designed to ensure a secure and precise fit between the Straumann bone-level implant and authentic Straumann bone-level abutments. No other manufacturer has the CrossFit Connection. Customers have reported implant and abutment failures when non-straumann abutments are used with Straumann implants. Authentic Straumann CrossFit Connection CrossFit Connection A A A Groove Limitations of competitor design n Competitor abutments are not designed using Straumann s precise engineering specifications n The square-shaped connection, shown below, provides surface contact with only the protrusions and can undermine security n The resulting imprecise fit leaves gaps that can lead to compromised performance Cylinder Groove Each CrossFit design element is designed to serve an important purpose n The CrossFit Connection supports the distribution of anti-rotational and bending forces n The grooves (A) ensure proper seating of the Straumann abutment n The cylinder connection supports mechanical stability Square-shaped connection No cylinder to support mechanical stability No CrossFit grooves to provide a secure and precise fit with the Straumann bone-level implant 9

13 TISSUE LEVEL CROWN Description REGULAR NECK Final / COPING / gold RN synocta 1.5 abutment or plastic/ short/ V long & V4 RN synocta Gold abutment RN synocta 15 A / V4 / RN synocta 15 B RN synocta 20 A / V4 / / V4 / Screw Retained RN synocta 20 B RN synocta 15 A RN synocta 15 B RN synocta 20 A short/ long V4 & V / V4 / / V4 / / V4 / / V4 / RN synocta 20 B / V4 / RN synocta transversal (TS) abutment / gold or plastic/ WIDE NECK / gold WN synocta 1.5 abutment/coping or plastic/ & WN synocta Gold abutment

14 TISSUE LEVEL CROWN (continued) Description REGULAR NECK Final / RN Solid abutment All-In-One set, 4.0 mm RN Solid abutment All-In-One set, 5.5 mm RN Solid abutment All-In-One set, 7.0 mm RN Solid abutment, 4.0 mm/ V4/ V4 or / plastic CEMENT Retained RN Solid abutment, 5.5 mm/ RN Solid abutment, 7.0 mm/ RN synocta cementable 5.5/ RN synocta 15 A Plastic shoulder RN synocta 15 B Plastic shoulder RN synocta 20 A Plastic shoulder RN synocta 20 B Plastic shoulder RN synocta 15 A Plastic shoulder RN synocta 15 B Plastic shoulder RN synocta 20 A Plastic shoulder RN synocta 20 B Plastic shoulder short/ long V4/ V4 or V4/ V4 or V4 & V / plastic / plastic / / V / V / V / V / V / V / V / V4 RN synocta Meso abutment Straumann CADCAM abutment, ZrO 2 Straumann CADCAM abutment, Ti RN synocta gold abutment, crown

15 WIDE NECK Description Final WN Solid abutment All-in-One set, 4.0 mm WN Solid abutment All-in-One set, 5.5 mm CEMENT Retained WN Solid abutment, 4.0 mm/ WN Solid abutment, 5.5 mm/ WN synocta cementable abutment, H 5.5 mm WN synocta 15 A / or / or / plastic / plastic / / WN synocta 15 B / WN synocta Gold abutment & WN synocta Meso abutment Straumann CADCAM abutment, Ti 12

16 TISSUE LEVEL BRIDGE Description REGULAR NECK Final / COPING RN synocta 1.5 abutment/ / gold or plastic RN synocta 15 A / V4 RN synocta 15 B / V4 Screw Retained RN synocta 20 A RN synocta 20 B RN synocta 15 A RN synocta 15 B RN synocta 20 A short/ long V4 & V / V / V / V / V / V4 RN synocta 20 B / V4 WIDE NECK WN synocta 1.5 abutment/ & / gold or plastic 13

17 Description REGULAR NECK Final / COPING RN synocta 1.5 abutment/ short/ long V4 & V or / gold or plastic RN Solid abutment All-In-One set, 4.0 mm RN Solid abutment All-In-One set, 5.5 mm RN Solid abutment All-In-One set, 7.0 mm RN synocta Gold abutment short/ long V4 & V RN synocta 5.5 abutment RN Meso abutment RN synocta abutment 15 A / V4 CEMENT Retained RN synocta abutment 15 B RN synocta abutment 20 A RN synocta abutment 20 B RN synocta abutment 15 A RN synocta abutment 15 B RN synocta abutment 20 A short/ long V4 & V / V / V / V / V / V / V4 RN synocta abutment 20 B / V4 WIDE NECK WN Solid abutment All-in-One set, 4.0 mm WN Solid abutment All-in-One set, 5.5 mm WN synocta 1.5 abutment/ / gold or plastic WN synocta cementable abutment/ / plastic WN synocta cementable abutment 15 A/ WN synocta cementable abutment 15 B/ & / plastic / plastic WN synocta Gold abutment WN synocta Meso abutment

18 TISSUE LEVEL REMOVABLE Description REGULAR NECK Final RN synocta 1.5 abutment/ short/ long V / gold/ plastic/ gold or Ti BAR Connection bars Dolder bar, mini/matrix / Dolder bar, regular/matrix / WIDE NECK WN synocta 1.5 abutment/ & / gold or plastic REGULAR NECK RETENTIVE ANCHOR Retentive Anchor abutment Components for denture Elliptical matrix Ti matrix Gold matrix Dolder is a registered trademark of Prof. Eugen Dolder, former director of the School of Dentistry at the University of Zurich.

19 Description REGULAR NECK RN LOCATOR, AH 1.0 mm Final RN LOCATOR, AH 2.0 mm RN LOCATOR, AH 3.0 mm RN LOCATOR, AH 4.0 mm V V RN LOCATOR, AH 5.0 mm RN LOCATOR, AH 6.0 mm WIDE NECK WN LOCATOR, AH 1.0 mm WN LOCATOR, AH 2.0 mm LOCATOR WN LOCATOR, AH 3.0 mm V V4 WN LOCATOR, AH 4.0 mm WN LOCATOR, AH 5.0 mm Components for denture LOCATOR male processing package V2 Clear, 5 lbs V4 Pink, 3 lbs V4 Blue, 1.5 lbs V4 LOCATOR male processing package, extended range V2 Green, 3 4 lbs V4 Orange, 2 lbs V4 Red, 1.5 lbs V V4 Grey, 0 lbs V4 coping V4 Block-out spacer V20 Processing male V4 Processing Spacer V4 Holder V4 16 LOCATOR is a registered trademark of Zest Anchors, Inc.

20 do more with confidence Straumann delivers confidence on every level with products built on innovation, precision, reliability and simplicity supported by rigorous scientific and clinical evidence. Every Straumann dental implant and abutment is backed by our exclusive ten-year limited warranty. So look for the Certificate of Authenticity to be sure you are using genuine Straumann components. It s the mark of confidence. The value of authenticity Look-alike implant and abutment systems attempt to copy the original manufacturer s design, but cannot give assurance of equal precision or material quality. Compromises, such as a poor connection between the implant and abutment, can lead to complications. That s why practitioners should insist on genuine Straumann implants and restorative components. Manufactured: Straumann USA, 916A 113th Street, Arlington, TX cadcam.straumann.com Materials: Ivoclar Vivadent, AG Bendererstrasse Schaan Liechtenstein Phone: Fax: IPS e.max CAD RESTORATIONS BY STRAUMANN CADCAM Straumann certifies that IPS e.max CAD is a lithium-disilicate glass-ceramic for the CADCAM technique. Composition Elements Percentage SiO % Li 2 O % K 2 O 0 13 % P 2 O % ZrO % ZnO 0 8 % Others + coloring oxides 0 12 % Dental Copy (attach to patient record) Straumann is a registered trademark of Straumann Holding AG or its affiliates. IPS e.max is a registered trademark of Ivoclar Vivadent, AG, Liechtenstein. All rights reserved. The Certificate of Authenticity for Straumann implants is sent by the surgeon to the restorative doctor indicating that the surgeon has placed a genuine Straumann implant. The Straumann Lab Authenticity sticker is sent by the restorative doctor to the lab to request that only genuine Straumann components are used for the restoration. The CADCAM Materials Authenticity sticker certifies the composition of each Straumann CADCAM element for its corresponding restoration. It is sent to the dental lab from the milling center with the Straumann abutment, coping or framework. International Headquarters Institut Straumann AG Peter Merian-Weg 12 CH-4002 Basel, Switzerland Phone +41 (0) Fax +41 (0) Straumann USA Straumann USA, LLC 60 Minuteman Road Andover, MA Phone 800/ / Fax 978/ Straumann Canada Straumann Canada Limited 3115 Harvester Road, Suite 100 Burlington, ON L7N 3N8 Phone 800/ / Fax 905/ Straumann USA, LLC All rights reserved. Straumann and/or other trademarks and logos from Straumann that are mentioned herein are the trademarks or registered trademarks of Straumann Holding AG and/or its affiliates. All rights reserved. Straumann products are CE marked 8/10 USLIT 330