Plate Door Handles. We take the worry out of protecting what s valuable to you. Lockwood: no worries.

Transcription

1 Plate Door Handles We take the worry out of protecting what s valuable to you. Lockwood: no worries

2 We take the worry out of protecting what s valuable to you. Lockwood: no worries

3 Contents 1800 Series 2800 Series 4800 Series 5800 Series Brass Levers Square End Brass Plate Furniture Round End Brass Plate Furniture Narrow Stile Square End Brass Plate Furniture Narrow Stile Round End Brass Plate Furniture page 4 page 6 page 9 page 11 page Series Artefact 202 Series Artefact 212 Series Artefact 224 Series Artefact Detention Series Square Corner Plate Furniture Radius Corner Plate Furniture Oval Corner Plate Furniture Rectangular Plate Furniture Square and Rectangular Furniture page 23 page 25 page 28 page 30 page 33 Brass Furniture Thicker Door Accessories 49 Lockwood Door Furniture Handing Convention 50 Palladium Series Door Handles Diecast Levers page 43 page 47 3

4 1800 Series Square End Brass Plate Furniture For a smart look choose this rectangular plate with bevelled edges and corners. It features concealed fixing on the outside plate. Application Designed for use with Lockwood Selector and Synergy Mortice Locks and Latches Product Details Door Thickness Dimensions Fixing Handing Standard Finishes Non Standard Finishes Special Finishes Turn Functions External plates are supplied with fixing screws to suit door thickness between 32 and 45mm. For thicker doors, please refer to the brass furniture thicker doors page at the end of this catalogue section. 166 x 48 x 12mm Plates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. Plates are not handed; levers may be reversed by removing the stop screw, except for handed levers and functions as shown in the ordering procedure. Satin Chrome Brushed (SC) Polished Brass (PB) Chrome Plate (CP) Polyester Powdercoat (PC)* Polished Brass Unlaqured (BU) Satin Brass (SB) Architectural Bronze (AZ) Architectural Bronze Unlaqured (AU) Antique Copper (AC) Oil Rubbed Bronze (ORB) Turn functions feature a unique mechanism that automatically adjusts the length of the tail bar to suit a particular door thickness. Standards and Compliance Successfully tested up to 4 hours on fire door assemblies in accordance with Australian Standard AS Part 1: Fire Resistant Doorsets. High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Tested to AS for Neutral Salt Spray with SC Finish Passing C10 Extreme Corrosion Resistance hours. Australian Made AS Compliance The range includes AS compliant levers and turns as shown. * For the Powdercoat colour range, please see the Dulux Powdercoat Range at the end of this catalogue section. 4

5 1800 Series Levers and Functions Levers and Knobs 92 to Suit A B For lever images and dimensions, see page 15. Plates and Functions * 1941 * * Refer to ordering procedure for part number when ordering with 3770 Series. Plates and Functions Legend Cylinder Hole Turnknob Emergency Turn Fixed Lever Disabled Turnknob LED Indicating Turnknob Indicating Emergency Turn Lever 5

6 2800 Series Round End Brass Plate Furniture For a smart look choose this rectangular plate with bevelled edges and round ends. It features concealed fixing on the outside plate. Application Designed for use with Lockwood Selector and Synergy Mortice Locks and Latches Product Details Door Thickness Dimensions Fixing Handing Standard Finishes Non Standard Finishes Special Finishes Turn Functions External plates are supplied with fixing screws to suit door thickness between 32 and 45mm. For thicker doors, please refer to the brass furniture thicker doors page at the end of this catalogue section. 166 x 48 x 12mm Plates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. Plates are not handed; levers may be reversed by removing the stop screw, except for handed levers and functions as shown in the ordering procedure. Satin Chrome Brushed (SC) Polished Brass (PB) Chrome Plate (CP) Polyester Powdercoat (PC)* Polished Brass Unlaqured (BU) Satin Brass (SB) Architectural Bronze (AZ) Architectural Bronze Unlaqured (AU) Antique Copper (AC) Oil Rubbed Bronze (ORB) Turn functions feature a unique mechanism that automatically adjusts the length of the tail bar to suit a particular door thickness. Standards and Compliance Successfully tested up to 4 hours on fire door assemblies in accordance with Australian Standard AS Part 1: Fire Resistant Doorsets. High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Tested to AS for Neutral Salt Spray with SC Finish Passing C10 Extreme Corrosion Resistance hours. Australian Made AS Compliance The range includes AS compliant levers and turns as shown. * For the Powdercoat colour range, please see the Dulux Powdercoat Range at the end of this catalogue section. 6

7 2800 Series Levers and Functions Levers and Knobs 92 to Suit A B For lever images and dimensions, see page 15. Plates and Functions * 2941 * * Refer to ordering procedure for part number when ordering with 3770 Series Plates and Functions Legend Cylinder Hole Turnknob Emergency Turn Fixed Lever Disabled Turnknob LED Indicating Turnknob Indicating Emergency Turn Lever 7

8 1800 and 2800 Series Ordering Procedure For example: Sample part number 1801/41LCP is made up of several selections. Choose your product by selecting an option from each section. Plate Type Plate Function Lever/ Knob Handing Finish / 41 L CP Plate Type Exterior Square End 18 Interior Square End 19 Exterior Round End 28 Interior Round End 29 Plate Function Cylinder Only 00 Cylinder & Lever 01 Emergency Turn & Lever 03 Turnknob & Lever 04 Lever Only 05 Turnknob Only 06 Plain Plate 07 Cylinder & Fixed lever 08 Fixed Lever Only 09 Plate Function - Handed - Selector Disabled Accessible Turnknob & Lever - Selector 39S Privacy Indicating Disabled Turnknob & Lever - Selector 41S Plate Function - Handed - Synergy Disabled Accessible Turnknob & Lever - Synergy 39 Privacy Indicating Disabled Turnknob & Lever - Synergy 41 Lever/Knob Type B A 78 AS Compliant Levers Handed Levers Handing Right Handed Left Handed NB: Omit if non-handed R L Finish Satin Chrome Polished Brass Chrome Plate Polished Brass Unlacquered Polyester Powdercoat Satin Brass Architectural Bronze Unlaqured Antique Copper Oil Rubbed Bronze SC PB CP BU PC* SB AU AC ORB * For the powdercoat colour range, please see the Dulux Powdercoat Range at the end of this catalogue section. Two Cylinders 10 Privacy Indicating Emergency Turn Only 13 Privacy Indicating Emergency Turn & Lever 14 Privacy Indicating Turnknob Only 15 Privacy Indicating Turnknob & Lever 16 Privacy Indicating Emergency Turn & Lower Cylinder 19 Cylinder, Lever & LED 20 Cylinder, Fixed Lever & LED 21 Lever & LED 22 Cylinder & LED 23 8

9 4800 Series Narrow Stile Brass Plate Furniture A slimline, rectangular brass plate that adds style to your choice of lever. Product Details Standards and Compliance Application Designed for use with Lockwood Selector and Synergy Series short and standard backset mortice locks. Additionally there are functions that are designed to work with Lockwood 3540 Series short backset mortice deadbolts. Note: Certain lever designs are not compatible on short backset assemblies due to interference with the door stop. Refer to the backset suitability page at the end of this section. Door Thickness Dimensions Fixing Handing Standard Finishes Non Standard Finishes External plates are supplied with fixing screws to suit door thickness between 32 and 50mm. For thicker doors, please refer to the brass furniture thicker doors page at the end of this catalogue section. 185 x 26 x 11.5mm Plates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. Plates are not handed; levers may be reversed by removing the stop screw, except for handed levers and functions as shown in the ordering procedure. Satin Chrome Brushed (SC) Polished Brass (PB) Chrome Plate (CP) Polyester Powdercoat (PC)* Fire Rated (3770 and 3570 Series only). High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Anti Corrosion Australian Made AS Compliance The range includes AS compliant levers and turns as shown. 185 Special Finishes Turn Functions Polished Brass Unlaqured (BU) Satin Brass (SB) Architectural Bronze (AZ) Architectural Bronze Unlaqured (AU) Antique Copper (AC) Oil Rubbed Bronze (ORB) Turn functions feature a unique mechanism that automatically adjusts the length of the tail bar to suit a particular door thickness * For the Powdercoat colour range, please see the Dulux Powdercoat Range at the end of this catalogue section. 9

10 4800 Series Levers and Functions Levers and Knobs to Suit A B For lever images and dimensions, see page /4900 Plates and Functions (3780 & 3580 Series) Functions for 3540 Series deg 4600/4700 Plates and Functions (3770 & 3570 Series) Plates and Functions Legend Cylinder Hole Turnknob Emergency Turn Fixed Lever Disabled Turnknob LED Lever For parts in red, lever and plain plate versions use the 4800/4900 versions. 10

11 5800 Series Narrow Stile Brass Plate Furniture Functional, yet elegant, the soft lines of this round ended brass plate complement a wide range of levers. Application Designed for use with Lockwood Selector and Synergy Series short and standard backset mortice locks. Additionally there are functions that are designed to work with Lockwood 3540 Series short backset mortice deadbolts. Note: Certain lever designs are not compatible on short backset assemblies due to interference with the door stop. Refer to the backset suitability page at the end of this section. 185 Product Details Dimensions Door Thickness Fixing Handing Standard Finishes Non Standard Finishes Special Finishes Turn Functions 185 x 26 x 11.5mm External plates are supplied with fixing screws to suit door thickness between 32 and 50mm. For thicker doors, please refer to the brass furniture thicker doors page at the end of this catalogue section. Plates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. Plates are not handed; levers may be reversed by removing the stop screw, except for handed levers and functions as shown in the ordering procedure. Satin Chrome Brushed (SC) Polished Brass (PB) Chrome Plate (CP) Polyester Powdercoat (PC)* Polished Brass Unlaqured (BU) Satin Brass (SB) Architectural Bronze (AZ) Architectural Bronze Unlaqured (AU) Antique Copper (AC) Oil Rubbed Bronze (ORB) Turn functions feature a unique mechanism that automatically adjusts the length of the tail bar to suit a particular door thickness. Standards and Compliance Fire Rated (3770 & 3570 Series only) High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Anti Corrosion Australian Made AS Compliance The range includes AS compliant levers and turns as shown * For the Powdercoat colour range, please see the Dulux Powdercoat Range at the end of this catalogue section. 11

12 5800 Series Levers and Functions Levers to Suit A B For detailed information regarding brass levers refer to page /5900 Plates and Functions (3780 & 3580 Series) Functions for 3540 Series deg 5600/5700 Plates and Functions (3770 & 3570 Series) Plates and Functions Legend Cylinder Hole Turnknob Emergency Turn Fixed Lever Disabled Turnknob LED Lever For parts in red, lever and plain plate versions use the 5800/5900 versions. 12

13 4800 & 5800 Series Ordering Procedure Example: Sample part number 4801/53LCP is made up of several selections. Choose your product by selecting an option from each section. Plate Type Plate Function Lever Type Handing Finish / 53 L CP Plate Type Plate Function Lever Type Handing Finish 3770 / 3570 Series Cylinder Only Right Handed R Satin Chrome SC Exterior Square End 46 Cylinder & Lever B Left Handed L Polished Brass PB Interior Square End 47 Exterior Round End 56 Emergency Turn & Lever 03 Turnknob & Lever NB: Omit if non-handed Chrome Plate CP Polished Brass Unlaqured BU Interior Round End 57 Lever Only 05 55A 74 Polyester Powdercoat PC* 3780 / 3580 Series Exterior Square End 48 Interior Square End 49 Exterior Round End 58 Interior Round End 59 Turnknob Only 06 Plain Plate 07 Two Cylinders 10 Cylinder, Lever & LED 20 Lever & LED 22 Cylinder & LED 23 Disabled Accessible Turnknob & Lever 39 Plate Function - Handed AS Compliant Levers Handed Levers Satin Brass Architectural Bronze Unlaqured Antique Copper Oil Rubbed Bronze SB AU AC ORB * For the powdercoat colour range, see the Dulux Powdercoat Range at the end of this catalogue section. Fixed Lever & Cyinder 08 Fixed Lever Only 09 Cylinder, Fixed Lever & LED Furniture Ordering Procedure Plate Type Plate Function Lever Type Finish / 70 SC Platform Name Plate Function Lever Type Finish Exterior Square End 48 Lever Only Satin Chrome SC Interior Square End 49 Exterior Round End 58 Interior Round End 59 Lever - Angled Up 45º 81 AS Compliant Levers Polished Brass Chrome Plate Polyester Powdercoat PB CP PC Note: No other finish options available. 13

14 4800 & 5800 Series Lever Suitability Application All narrow style door furniture will be closer to the door frame. Lever handles with 90 degree angles can cause the lever stem to hit the door frame and prevent the door from opening. The table below provides a guide to lever compatibility and each model of short backset lock from 3782 to Based on 12mm doorstop. Lever Number mm mm mm mm A B

15 Brass Levers and Knobs is defined as the clearance between the lever and the base of the rose or plate at the centre of the lever. The tables below are calculated using an assembled plate/rose thickness of 12.5mm. Due to different bearing bush, the projection and finger clearance of levers in the 4800/5800 Series is 2.5mm larger than the value shown (except Lever 90). For use on the following door furniture series: 1220 Series 1420 Series 1360 Series 1370 Series 1800 Series 2800 Series 4800 Series 5800 Series Artefact Series Knob 20 Diameter 50mm 73mm 50 Not compatible with 1220 Symphony internal rose Lever mm 53mm 35.5mm Intermezzo mm 61.5mm 40.5mm * Lever is an asymmetrical design and therefore must be handed

16 Brass Levers and Knobs Arpeggio mm 59.5mm 42mm Sonata mm 57mm 40mm Veloce mm 73.5mm 45mm 61 *Lever is an asymmetrical design and therefore must be handed Lever mm 62.5mm 40.3mm

17 Brass Levers and Knobs Lever 55A 115mm 62.5mm 40.3mm Overture mm 57.5mm 38mm Lever mm 65mm 54.2mm Lever mm 52.5mm 25.5mm *Lever is an asymmetrical design and therefore must be handed

18 Brass Levers and Knobs Lever mm 51mm 43.5mm Lever mm 50mm 42mm Lever mm 48.5mm 40.5mm Lever mm 53mm 37mm

19 Brass Levers and Knobs Tempo mm 62mm 44.5mm Ving mm 53mm 45mm Lever mm 50mm 42mm Lever mm 51mm 40.5mm

20 Brass Levers and Knobs Candenza mm 52 52mm 30mm Tenor mm 50.5mm mm Lever 79B mm 50.5mm mm Lever mm mm 40mm

21 Brass Levers and Knobs Lever mm 62mm 33.5mm Lever mm 51mm 43.5mm Lever mm mm 45mm Lever mm 52mm 45mm

22 Brass Levers and Knobs Chorus Line mm 50.5mm 34.6mm

23 200 Series Artefact Square Corner Plate Furniture The 200 Series Door Furniture is 162mm square with square corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Application Designed for use with Lockwood Selector 3770 and Synergy 3570 Series Mortice Locks; Latches and Push and Pull doors Product Details Dimensions Door Thickness Standard Finishes Fixing Finishes Non Standard Handing Materials 162 x 162 x 3mm - aluminium 162 x 162 x 2mm - stainless steel and brass 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP Natural Anodised Aluminium (NT) Satin Stainless Steel (SS) Plates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. Polished Stainless Steel (PS) Powdercoat (PC)* 316 Marine Grade (MG) Polished Brass (PB) All plates are handed with the exception of plain plates and pull handles. Aluminium, brass and stainless steel Standards and Compliance Fire Rated High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Anti Corrosion Note: When using flush pulls back to back the minimum door thickness is 40mm. * For the Powdercoat color range, please see the Dulux Powdercoat Range at the end of this catalogue section. 2 3 SS/Brass Aluminium 23

24 200 Series Levers and Functions Levers and Knob to Suit 20* 1 88* For lever images and dimensions, see page 15. *1 Stainless Steel Only *2 Aluminium Only Pull Handle to Suit 75 P1 Aluminium Stainless Steel Plates 20000NA 20100NA 20002NN 20006NN 20106NN 20010NA 20013NN* AN 20007CN 20007E N 20007FN 20007NN 20107NN 20001NA 20101NA 20003NN 20004NN 20104NN 20014NN* NA 20120NA 20005NN 20105NN 20022NN 20122NN 20139NN* NN 20124NN 20025NA 20125NA 20027NN 20127NN 20028NN 20142NN 20024AN 20024CN 20024EN 20024GN 20031NN* NN* NA* NA* NN* NN* 4 *3 Replace NN with NS when ordering with 3770 Series *4 Recommended for sliding doors only Plates and Functions Legend Cylinder Hole Turnknob Emergency Turn Disabled Turnknob LED Indicating Emergency Turn 24

25 202 Series Artefact Round Corner Plate Furniture The 202 Series Door Furniture is 162mm square with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Application Designed for use with Lockwood Selector 3770 and Synergy 3570 Series Mortice Locks; Latches and Push and Pull doors Product Details Dimensions Door Thickness Fixing Standard Finishes Finishes Non Standard Handing Materials 162 x 162 x 3mm - aluminium 162 x 162 x 2mm - stainless steel and brass 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP Plates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. Natural Anodised Aluminium (NT) Satin Stainless Steel (SS) Polished Stainless Steel (PS) Powdercoat (PC)* 316 Marine Grade (MG) Polished Brass (PB) All plates are handed with the exception of plain plates and pull handles. Aluminium, brass and stainless steel Standards and Compliance Fire Rated High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Anti Corrosion Note: When using flush pulls back to back the minimum door thickness is 40mm. * For the Powdercoat color range, please see the Dulux Powdercoat Range at the end of this catalogue section. 2 3 SS/Brass Aluminium 25

26 202 Series Levers and Functions Levers and Knob to Suit 20* 1 88* For lever images and dimensions, see page 15. * 1 Stainless Steel Only * 2 Aluminium Only Pull Handle to Suit 75 P1 Aluminium Stainless Steel Plates 20200NA 20300NA 20202NN 20206NN 20306NN 20210NA 20213NN* AN 20207CN 20207EN 20207FN 20207NN 20307NN 20201NA 20301NA 20203NN 20204NN 20304NN 20214NN* NA 20320NA 20205NN 20305NN 20222NN 20322NN 20339NN* NN 20324NN 20225NA 20325NA 20227NN 20327NN 20228NN 20342NN 20224AN 20224CN 20224EN 20224GN 20231NN* NN* NA* NA* NN* NN* 4 * 3 Replace NN with NS when ordering with 3770 Series * 4 Recommended for sliding doors only Plates and Functions Legend Cylinder Hole Turnknob Emergency Turn Disabled Turnknob LED Indicating Emergency Turn 26

27 200/202 Series Ordering Procedure When ordering 13, 14, 16 or 39 functions with 3770 series, specify S in cylinder type instead of N. Sample part number 20001NA/96LSS is made up of several sections. Choose your product by selecting an option from each section. Plate Type Plate Function Engraving Cylinder Type Lever/Knob/ Pull Handle Handing Finish N A / 96 L SS Plate Type Plate Function Engraving - Handed Lever/ Knob Type Finish Exterior Plate (162 x 162) Square Corners 200 Interior Plate (162 x 162) Square Corners 201 Exterior Plate (162 x 162) Radius Corners 202 Interior Plate (162 x 162) Radius Corners 203 Plain Plate 07 Pull Handle Only 24 Plate Function - Handed Cylinder Only 00 Cylinder & Lever 01 Emergency Turn Only 02 Emergency Turn & Lever 03 Turnknob & Lever 04 Lever Only 05 Turnknob Only 06 Cylinder & Fixed Lever 08 Fixed Lever Only 09 Dual Cylinder 10 Privacy Indicating Emergency Turn Only 13 Privacy Indicating Emergency Turn & Lever 14 Privacy Indicating Turnknob & Lever 16 Cylinder, Lever & LED 20 Cylinder, Fixed Lever & LED 21 Lever & LED 22 Cylinder & LED 23 Pull Handle & Cylinder 25 Pull Handle & Emergency Turn 26 Pull Handle & Turnknob 27 Pull Handle & Privacy Indicating Emergency Turn 28 A G Outlined Infill R X Full Infill Male symbol A R Male text B S Female symbol C T Female text D U Disabled symbol E V Push text F W Pull text G X Unisex symbol H Y No option N For all in-filled engraving, black gloss is the standard. Cylinder Type Oval Cylinder 32mm (H) x 18mm (W) Lockwood 570 Cylinders A Guarded Oval Cylinder 32mm (H) x 18mm (W) Lockwood 570 Cylinders B No Cylinder Function Selector S* No Cylinder Function Synergy N * Only applies to 13, 14, 16 and 39 functions A * B 98* 2 AS Compliant Levers * * 2 96* * 1 Handed Levers Pull Handles P1 P1* 1 75* 2 Pull Handles - Horizontal HP1 HP1* 1 H75* 2 Handles are brass unless indicated otherwise * 1 = Stainless Steel * 2 = Aluminium * 3 = 316 Marine Grade Handing Left Handed Right Handed L R Stainless Steel Finishes Satin Stainless Steel SS Polished Stainless Steel PS Powdercoat PC 316 Marine Grade MG Aluminium Finishes Natural Anodised NT Brass Finishes Polished Brass PB Pull Handle & Dual Cylinder 30 Flush Pull Only 31 Flush Pull & Cylinder 32 Flush Pull & Emergency Turn 33 Flush Pull & Turnknob 34 Flush Pull & Privacy Indicator Emergency Turn 35 Flush Pull & Dual Cylinder 37 Disabled Turnknob & Lever 39 Pull Handle & Disabled Turnknob 42 27

28 212 Series Artefact Oval Plate Furniture The 212 Series Door Furniture is 162mm long x 50mm wide with radius ends. Concealed fixed plates have studs with internal threads located top and bottom, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Application Designed for use with Selector 3770 and Synergy 3570 Series Mortice Locks. 50 Product Details Dimensions Materials Door Thickness Standard Finishes Non Standard Finishes 162 x 50 x 3mm - aluminium 162 x 50 x 2mm - stainless steel and brass Aluminium, stainless steel or brass 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP Natural Anodised Aluminium (NT) Stainless Steel (SS) Polished Stainless Steel (PS) Powdercoat (PC) 316 Marine Grade (MG) Polished Brass (PB) Standards and Compliance Fire Rated High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Anti Corrosion SS/Brass Aluminium 28

29 212 Series Levers and Functions Levers and Knob to Suit 20* 1 88* For lever images and dimensions, see page 15. * 1 Stainless Steel Only * 2 Aluminium Only Pull Handle to Suit 75 P1 Aluminium Stainless Steel Plates 21200NA 21300NA 21202NN 21206NN 21306NN 21207NN 21307NN 21210NA 21213NN* NA 21301NA 21203NN 21204NN 21304NN 21205NN 21305NN 21214NN* NN* NA 21320NA 21222NN 21322NN * 3 Replace NN with NS when ordering with 3770 Series Plates and Functions Legend Cylinder Hole Turnknob Emergency Turn Disabled Turnknob LED Indicating Emergency Turn 29

30 224 Series Artefact Rectangular Plate Furniture The 224 Series Door Furniture is 162mm long x 50mm wide with square ends. Concealed fixed plates have studs with internal threads located top and bottom, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Application Designed for use with Selector 3770 and Synergy 3570 Series Mortice Locks. Product Details Dimensions Materials Door Thickness Finishes 162 x 50 x 2mm - stainless steel Stainless steel only. 35mm to 45mm as supplied. Maximum 65mm. For thicker door parts, see page 53. Stainless Steel (SS) Standards and Compliance Fire Rated High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Anti Corrosion

31 224 Series Levers and Functions Levers and Knob to Suit For lever images and dimensions, see page 15. Pull Handle to Suit P1 Stainless Steel Plates 22400NA 22500NA 22402NN 22406NN 22506NN 22407NN 22507NN 22410NA 22413NN* 22401NA 22501NA 22403NN 22404NN 22504NN 22405NN 22505NN 22414NN* 22539NN* 22420NA 22520NA 22422NN 22522NN * Replace NN with NS when ordering with 3770 Series Plates and Functions Legend Cylinder Hole Turnknob Emergency Turn Disabled Turnknob LED Indicating Emergency Turn 31

32 212/224 Series Ordering Procedure When ordering 13, 14, 16 or 39 functions with 3770 series, specify S in cylinder type instead of N. Sample part number 21201NA/96LSS is made up of several sections. Choose your product by selecting an option from each section. Plate Type Plate Function Engraving Cylinder Type Lever/Knob/ Pull Handle Handing Finish N A / 96 L SS Plate Type Plate Function Engraving - Handed Lever/ Knob Type Finish Exterior Plate (162 x 50) Oval 212 Interior Plate (162 x 50) Oval 213 Exterior Plate (162 x 50) Rectangular 224 Interior Plate (162 x 50) Rectangular 225 Cylinder Only 00 Cylinder & Lever 01 Emergency Turn Only 02 Emergency Turn & Lever 03 Turnknob & Lever 04 Lever Only 05 Turnknob Only 06 Plain Plate 07 Dual Cylinder 10 Privacy Indicating Emergency Turn Only 13 Privacy Indicating Emergency Turn & Lever 14 Privacy Indicating Turnknob & Lever 16 Cylinder, Lever & LED 20 Cylinder, Fixed Lever & LED 21 Lever & LED 22 Cylinder & LED 23 Plate Function - Handed Cylinder & Fixed Lever 08 Fixed Lever Only 09 Disabled Turnknob & Lever 39 A G Outlined Infill R X Full Infill Male symbol A R Male text B S Female symbol C T Female text D U Disabled symbol E V Push text F W Pull text G X Unisex symbol H Y No option N For all in-filled engraving, black gloss is the standard. Cylinder Type Oval Cylinder 32mm (H) x 18mm (W) Lockwood 570 Cylinders A Guarded Oval Cylinder 32mm (H) x 18mm (W) Lockwood 570 Cylinders B No Cylinder Function - Selector S* No Cylinder Function - Synergy N * Only applies to 13, 14, 16 and 39 functions * 1 55A 79 98* B AS Compliant Levers * * * 1 Handed Levers Angled Levers 98A Pull Handles P1 P1* 1 75* 2 Handles are brass unless indicated otherwise * 1 = Stainless Steel * 2 = Aluminium Handing Stainless Steel Finishes Satin Stainless Steel SS Polished Stainless Steel PS Powdercoat PC 316 Marine Grade MG Aluminium Finishes *4 Natural Anodised NT Brass Finishes *4 Polished Brass PB *4 Only available with 212 Series Left Handed L Right Handed R 32

33 Detention Series Square Plate Furniture A heavy duty plate designed for use in hospitals and detention facilities. Styled for institutional use, this plate has six fixing points to ensure that it is well secured to the door. Plates are designed to be free of ligature points. Application Designed for use with Lockwood Selector 3770 and Synergy 3570 Series Mortice Locks as well as Lockwood 3579 Secure Area Rated Locks. Features and Specifications Anti-ligature - Knob 21 & 22 Covers fixing holes from existing Artefact 200 Series Furniture Detention furniture turns feature a clutching mechanism that allows the cylinder to retract the bolt even if the turnknob is held from the inside Product Details Dimensions Door Thickness* Finishes Fixing Handing Materials 162mm x 180mm x 2mm: base plate 161mm x 75mm x 3mm: bevelled top plate 35mm minimum, 45mm maximum Satin Stainless Steel (SS) Six fixing points 220D series plates have concealed fixings 221D series plates have visible fixings All plates are handed except 220D07, 220D24 and 220D31, which are non-handed when ordered without engraving. Stainless steel *Note: A minimum door thickness of 50mm is required to fit flush pulls back to back. Standards and Compliance Fire Rated High security for maximum protection (AS4145.2:1993). High durability for maximum frequency usage. Anti Corrosion 33

34 Detention Series Square Plate Lever/Knobs and Functions 220D00 220D01 220D02 220D03 220D04* 220D05 220D06* 220D07 220D08 220D09 220D13* 220D14* 220D15* 220D16* 220D20 220D21 220D22 220D23 220D24 220D25 220D26 220D27 220D28 220D29 220D31 220D32 220D33 220D34 220D35 220D36 220D56 220D57 220D58 220D59* 220D60* 220D61* 220D62 220D63 220D64 220D65* 220D66* 220D67* Legend: Cylinder Hole Lever/Knob Fixed Lever/Knob Turnknob Emergency Turn Privacy Indicating Turnknob Privacy Indicating Emergency Turn LED Pull Handle Flush Pull Cylinder guards must be ordered separately. Only the plate functions shown above in red are available with engraving. * Refer to ordering procedure for part number when ordering with 3770 Series Lever and Knob Selection Standard Knob 21 Webbed Knob 22 Lever Ø60 ø Ø60 ø

35 Detention Series Rectangular Plate Furniture This smaller plate range has been designed for use in detention facilities such as hospitals where domestic aesthetics are preferred over institutional type styling. Plates are designed to be free of ligature points. Application Designed for use with Lockwood Selector 3770 and Synergy 3570 Series Mortice Locks as well as Lockwood 3579 Secure Area Rated Locks. Features and Specifications Anti-ligature - Knob 21 & 22 Covers fixing holes from existing 212 Series Artefact Plates Detention furniture turns feature a clutching mechanism that allows the cylinder to retract the bolt even if the turnknob is held from the inside Product Details Dimensions Door Thickness Finishes Fixing Handing Materials 162mm x 76mm x 2mm: base plate 161mm x 75mm x 3mm: bevelled top plate 35mm minimum, 45mm maximum Satin Stainless Steel (SS) Four fixing points 222D series plates have concealed fixings 223D series plates have visible fixings Only plates with 23 Lever and / or turnknobs are handed Stainless steel Standards and Compliance Fire Rated High security for maximum protection (AS4145.2:1993). High durability for maximum frequency usage. Anti Corrosion 35

36 Detention Series Rectangular Plate Lever/Knobs & Functions 222D00 222D01 222D02 222D03 222D04* 222D05 222D06* 222D07 222D08 222D09 222D13* 222D14* 222D15* 222D16* 222D20 222D21 222D22 222D23 222D24 Legend: Cylinder Hole Lever/Knob Fixed Lever/Knob Turnknob Emergency Turn Privacy Indicating Turnknob Privacy Indicating Emergency Turn LED Pull Handle * Refer to ordering procedure for part number when ordering with 3770 Series Lever and Knob Selection Standard Knob 21 Webbed Knob 22 Lever Ø60 ø

37 Detention Series Knobs and Levers Standard Knob Simple yet functional, this knob has soft edges to minimise impact injuries and antiligature features that make it suitable for use in detention facilities. Ø60 Webbed Knob The webbed knob combines pleasing aesthetics, comfortable grip and antiligature features to provide a solution for any environment. ø60 Lever 23 Ergonomically designed to maximise grip, the detention lever is suitable for use in hospitals and minimum security applications. It caters especially for the elderly or people with arthritic conditions

38 Detention Series Turns 3 Emergency Turn 42 Turnknob 42 3 Privacy Indicating Emergency Turn 42 Privacy Indicating Turnknob 42 38

39 Detention Series Pulls Flush Pull 121 The detention flush pull has been designed to maximise grip and eliminate the possibility of hiding objects in the cavity Standard Pull The detention pull allows for a firm grip and can be used to open heavy doors. Also designed to be free of hanging points. 40 R

40 Detention Series Accessories Cylinder Guards Part Number 220D00/40SS 220D00/45SS 220D00/50SS 220D00/55SS 220D00/60SS Door Thickness Suitability Suit doors 35-40mm Suit doors 40-45mm Suit doors 45-50mm Suit doors 50-55mm Suit doors 55-60mm Cylinder guards must be fitted with any cylinder plate function. Guards are available to suit different door thicknesses. Fixing Screws Part Number Description Door Thickness Suitability 220D11/45 Torx Anti-tamper Screws 35-45mm 220D11/55 Torx Anti-tamper Screws 45-55mm 220D11/65 Torx Anti-tamper Screws 55-65mm 220D12/45 Standard Screws 35-45mm 220D12/55 Standard Screws 45-55mm 220D12/65 Standard Screws 55-65mm 220D13/50 Snake-eye Screws 35-50mm Torx anti-tamper, snake-eye and standard screws are available in accessory packs to suit different door thicknesses. Only standard screws to suit doors 35mm 45mm thick are supplied with furniture. Other variations need to be ordered separately using part numbers specified. All accessory packs contain six screws for the six mounting points per plate. Screws are a M4 threaded screw with micro-encapsulation to provide resistance against coming loose. Screws are supplied with concealed fix furniture. For screws longer than 65mm, order SP0655MBK (75mm screws). 40

41 Detention Series Square Plate Furniture Ordering Procedure When ordering 04, 06, 13, 14, 15, 16, 59, 60, 61, 65, 66 or 67 functions with 3770 series, refer to Cylinder Type specification for difference in part numbers. Sample part number 220D01NA/21LSS is made up of several sections. Choose your product by selecting an option from each section. Plate Function Engraving Options Cylinder Type Lever/ Knob Handing Finish 220 D 01 N A / 21 L SS Plate Function - Handed cont. Engraving Options Knob Finish Concealed Fix 162mm x 180mm 220 Visible Fix 162mm x 180mm 221 Function Plain Plate 07 Pull Handle Only 24 Flush Pull Only 31 Function - Handed Cylinder Only 00 Cylinder and Lever/Knob 01 Emergency Turn Only 02 Emergency Turn and Lever 03 Turnknob and Lever/Knob 04 Lever/Knob Only 05 Turnknob Only 06 Cylinder and Fixed Lever/Knob 08 Fixed Lever/Knob Only 09 Privacy Indicating Emergency Turn Only 13 Privacy Indicating Emergency Turn and Lever/Knob 14 Privacy Indicating Turnknob Only 15 Privacy Indicating Turnknob and Lever/Knob 16 Cylinder, Lever/Knob and LED 20 Cylinder, Fixed Lever/Knob and LED 21 Lever/Knob and LED 22 Cylinder and LED 23 Pull Handle and Cylinder 25 Pull Handle and Emergency Turn 26 Pull Handle and Turnknob 27 Pull Handle and Privacy Indicating Emergency Turn 28 Pull Handle and Privacy Indicating Turnknob 29 Flush Pull and Cylinder 32 Flush Pull and Emergency Turn 33 Flush Pull and Turnknob 34 Flush Pull and Privacy Indicating Emergency Turn 35 Flush Pull and Privacy Indicating Turnknob 36 Pull Handle and Lever/Knob 56 Pull Handle, Cylinder and Lever/Knob 57 Pull Handle, Emergency Turn and Lever/Knob 58 Pull Handle, Turnknob and Lever/Knob 59 Pull Handle, Privacy Indicating Emergency Turn and Lever/Knob 60 Pull Handle, Privacy Indicating Turnknob and Lever/Knob 61 Flush Pull and Lever/Knob 62 Flush Pull and Cylinder and Lever/Knob 63 Flush Pull and Emergency Turn and Lever/Knob 64 Flush Pull and Turnknob and Lever/Knob 65 Flush Pull and Privacy Indicating Emergency Turn and Lever/Knob 66 Flush Pull and Privacy Indicating Turnknob and Lever/Knob 67 Male Symbol A R Male Text B S Female Symbol C T Female Text D U Disabled Symbol E V Push Text F W Pull Text G X Unisex Symbol H Y No Option N For all in-filled engraving, black gloss is the standard. A-G Outlined Infill R-X Full Infill Cylinder Type Australian Oval A No Cylinder - Selector S *1 No Cylinder - Synergy N No Cylinder / No Tailbar - Selector SN *2 No Cylinder / No Tailbar - Synergy NN * 1 Only applies to 04, 06, 13, 14, 15, 16, 59, 60, 61, 65, 66 and 67 functions. * 2 Only applies to 15, 16, 61 and 67 functions. Standard Knob 21 Webbed Knob 22 Lever - Handed Lever 23 Handing Left Handed L Right Handed R Satin Stainless Steel Note: Cylinder guards must be ordered with all cylinder function plates. All turnknob functions are supplied with tailbars and clutching mechanisms as standard. SS 41

42 Detention Series Rectangular Plate Furniture Ordering Procedure When ordering 04, 06, 13, 14, 15 or 16 functions with 3770 series, refer to Cylinder Type specification for difference in part numbers. Sample part number 222D04NS/21LSS is made up of several sections. Choose your product by selecting an option from each section. Plate Function Engraving Options Cylinder Type Lever/ Knob Handing Finish 222 D 04 N S / 21 L SS Plate Engraving Options Knob Finish Concealed Fix 162mm x 76mm 222 Visible Fix 162mm x 76mm 223 Function Cylinder Only 00 Cylinder and Lever/Knob 01 Emergency Turn Only 02 Emergency Turn and Lever 03 Lever/Knob Only 05 Plain Plate 07 Cylinder and Fixed Lever/Knob 08 Fixed Lever/Knob Only 09 Privacy Indicating Emergency Turn Only 13 Privacy Indicating Emergency Turn and Lever/Knob 14 Cylinder, Lever/Knob and LED 20 Cylinder, Fixed Lever/Knob and LED 21 Lever/Knob and LED 22 Male Symbol A R Male Text B S Female Symbol C T Female Text D U Disabled Symbol E V Push Text F W Pull Text G X Unisex Symbol H Y No Option N For all in-filled engraving, black gloss is the standard. A-G Outlined Infill R-X Full Infill Cylinder Type Australian Oval A No Cylinder - Selector S* 1 No Cylinder - Synergy N No Cylinder / No Tailbar - Selector SN* 2 No Cylinder / No Tailbar - Synergy NN * 1 Only applies to 04, 06, 13, 14, 15 and 16 functions. * 2 Only applies to 15 and 16 functions. Standard Knob 21 Webbed Knob 22 Lever - Handed Lever 23 Handing Left Handed L Right Handed R Satin Stainless Steel Note: Cylinder guards must be ordered with all cylinder function plates. All turnknob functions are supplied with tailbars and clutching mechanisms as standard. SS Cylinder and LED 23 Function - Handed Turnknob and Lever/Knob 04 Turnknob only 06 Privacy Indicating Turnknob Only 15 Privacy Indicating Turnknob and Lever/Knob 16 42

43 Palladium Series Door Furniture The Palladium Series represents the highest standard in residential and semi-commercial door hardware and is brought to you through modern innovative designs, combined with quality manufacturing. A range of lever options is available to enable a common style throughout the home Product Details Dimensions Door Thickness Finishes Fixing Handing Materials Screws Keying Application 222 x 30 x 9mm Minimum 32mm - maximum 45mm door thickness. Satin Chrome Pearl (SP) Black (BLK) Polyester Powdercoat (PPC) Hole centres at 181mm Easy, field selectable handing. All plates and levers in the Palladium Series are constructed from solid zinc die-cast. M4 Trilobial thread cutting screws Use with Euro profile cylinder Used with Optimum and Union mortice locks, see table on page 48. Standards and Compliance D8 High security for maximum protection (AS4145.2:2008). Tested to AS for Durability passing D8-500,000 cycles. Tested to AS for Neutral Salt Spray passing C6 Normal Corrosion Resistance Hours. 43

44 Palladium Series Furniture French Door - PLFD Versions These are used on the fixed door of a set of double doors. The outside furniture has no visible screws, no cylinder hole and the handle is fixed. The inside furniture has visible screw fixings, is used to operate two way locking and has a cylinder hole. This works with the cylinder supplied with the two way lock. PLFD/85/## Double Cylinder - PL4 Versions These are used on the active door of either single or double doors. The outside furniture has no visible screws, a cylinder hole and the handle operates the latch on the lock. The inside furniture has visible screw fixings, a cylinder hole and the handle operates the latch on the lock. Handles operate bolts when used with a compatible multi point lock. PL4/85/## Indicating with Snib - PX4 Versions These are used on the active door of either single or double doors. The outside furniture has no visible screws, a cylinder hole and the handle operates the latch on the lock. The inside furniture has visible screw fixings, a cylinder hole and the handle operates the latch on the lock. The snib on the inside locks and unlocks the handles and the indicator is red when the cylinder is locked. PX4/85/## 44

45 Palladium Series Door Furniture Summit L Aria # Acacia #

46 Palladium Series Door Furniture Gidgee L

47 Diecast Levers Acacia # Part Number #29 122mm 56mm 41mm *Design Registered Australia/New Zealand. Aria S27 Part Number #27 123mm 48mm 36mm *Design Registered Australia/New Zealand Gidgee #37 Part Number #37 122mm 53mm 37mm *Design Registered Australia/New Zealand. Summit #L1 Part Number #L mm 57mm 37mm *Design Registered Australia/New Zealand. 47

48 Palladium Series Ordering Procedure Sample part number PL4/85/27SC is made up of several sections. Choose your product by selecting an option from each section. Palladium Platform Name Function Pitch Lever Finish PL 4 / 85 / 27 SP Platform Name Function Pitch Lever Finish Palladium PL Double Cylinder 4 85mm Pitch 85 Summit L1 Satin Chrome Pearl SP French Door FD Aria 27 Black BLK Note: PLFD versions only available in lever 1 and 27 Acacia 29 Gidgee 37 Polyester Powder Coat PPC Palladium Xtra Platform Name Function Pitch Lever Finish PX 4 / 85 / 34 SP Platform Name Function Pitch Lever Finish Palladium Xtra PX Double Cylinder 4 85mm Pitch 85 Summit L1 Satin Chrome Pearl SP Aria 27 Black BLK Acacia 29 Polyester Powder Coat PPC Gidgee 37 Application Item Number Product Name PL PX PLFD OP30/1LAN/SS OPTIMUM 1PT HINGED 30MM BACKSET TP 3 OP30/2PTL/SS OPTIMUM 2PT HINGED 24MM BOLT 30MM BACKSET TP 3 3 OP30/2PTL/SSBL OPTIMUM 2PT HINGED BEVEL BOLT 24MM BOLT 30MM BACKSET PK= OP30/2PTS/SS OPTIMUM 2PT HINGED 13MM BOLT 30MM BACKSET TP 3 3 OP30/2PTS/SSBL OPTIMUM 2PT HINGED BEVEL BOLT 30MM BACKSET PK=25 TP 3 3 OP30/4PTS/SSBL OPTIMUM 4PT HINGED SHOOT BEVEL BOLT 30MM BACKSET PK=25 TP 3 3 OP30/4RML/SS OPTIMUM 4PT HINGED REMOTES 24MM BOLT 30MM BACKSET 3 3 OP30/4RML/SSBL OPTIMUM 4PT HINGED REMOTES 24MM BOLT 30MM B/SET BEVEL BOLT & 2 PACKERS 3 3 OP30/4RMS/SS OPTIMUM 4PT HINGED REMOTES 13MM BOLT 30MM BACKSET 3 3 OP30/4SBL/SS OPTIMUM 4PT HINGED SHOOT BOLT 24MM BOLT 30MM BACKSET TP 3 3 OP30/4SBS/SS OPTIMUM 4PT HINGED SHOOT BOLT 13MM BOLT 30MM BACKSET TP 3 3 OP40/2PTL/SS OPTIMUM 2PT HINGED 24MM BOLT 40MM BACKSET TP 3 3 OP40/4SBS/SS OPTIMUM 4PT HINGED SHOOT BOLT 13MM BOLT 40MM BACKSET TP 3 3 OP50/2PTL/SS OPTIMUM 2PT HINGED 24MM BOLT 50MM BACKSET 3 3 U-X925-SS-M5 UNION 85MM PITCH EURO MORTICE LOCK 25MM BACKSET TP 3 U-X930-SS-M5 UNION 85MM PITCH EURO MORTICE LOCK 30MM BACKSET 3 U-X935-SS-M5 UNION 85MM PITCH EURO MORTICE LOCK 35MM BACKSET 3 P84318NRA TBL FR DR NO FURN/CYL *NO RODS 3 Note: For further information, please refer to the Euro Profile Mortice Locks catalogue. 48

49 Brass Furniture Thicker Door Accessories Lockwood Brass Door Furniture is suitable for use across a wide range of door thicknesses. In certain applications longer screws, spindles and turnknob tailbars may be required. Screws B A Turnknob Tailbars The door thickness range for a turnknob tailbar will depend on whether the turn is in a cylinder and turn configuration or a privacy (turn and turn) configuration Screws Turnknob Tailbars Part Number Pack Size (A) Threaded (B) Door Thickness Min Max SPA20-V3 NSS 20 65mm 40mm 32mm 50mm SP0655MBK 10 75mm 40mm 42mm 60mm SP ZP mm 75mm 52mm 105mm SP SS mm 125mm 97mm 200mm Part Number Pack Size SP571-38ZP 10 47mm SP ZP 1 98mm Note: Item shown is red is the standard tailbar that is supplied with furniture. Note: Item shown is red is the standard screw that is supplied with furniture. Consideration should be given to screw finish on furniture platforms featuring visible fixing. Mortice Lock Spindles A Mortice Lock Spindles Part Number Pack Size (A) Door Thickness Min Max SP mm 35mm 50mm SP mm 50mm 75mm SP mm 75mm 100mm In thicker door scenarios when Lockwood Brass Door Furniture is used with Lockwood Selector or Synergy Series Mortice Locks, longer spindles may be required. 49

50 Lockwood Door Furniture Handing Convention Applicable for All Handed Furniture Left Hand Lever Assembly Door Opening In Inside Right Hand Lever Assembly Right Hand Door Left Hand Door Right Hand Lever Assembly Outside Left Hand Lever Assembly Left Hand Lever Assembly Door Opening Out Inside Right Hand Lever Assembly Right Hand Door Left Hand Door Right Hand Lever Assembly Outside Left Hand Lever Assembly 50

51 Lockwood is the leading brand in the Australian locking industry. With an established reputation for high quality products, this iconic brand provides a wide range of locking solutions to residential housing, commercial, semi-commercial, building and industrial application markets. Lockwood is supported by an extensive distribution and after sales support network. Our customers include retailers, architects, trade and industrial personnel, locksmiths and security dealers. ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience. ASSA ABLOY is represented in all major regions, in both mature and emerging markets, with leading positions in Australia, Europe and North America. The Lockwood 25 Year Mechanical Warranty Our belief that we manufacture the finest premium products available in today s market place is backed by the Lockwood 25 Year Mechanical Warranty, ensuring that Lockwood continues to keep Australians safe by delivering security and peace of mind. For warranty terms and conditions, please visit or call 1300WARRANTY ASSA ABLOY Australia Pty Ltd 235 Huntingdale Road Oakleigh, Victoria, 3166 Australia 1300 LOCK UP ( ) lockweb.com.au ASSA ABLOY New Zealand Ltd 6 Armstrong Road Albany, Auckland, 0632 New Zealand info.nz@assaabloy.com Telephone assaabloy.co.nz Disclaimer Whilst every effort has been made to ensure that the information (including product images and drawings) contained in this brochure is accurate at the time of publication, ASSA ABLOY Australia Pty Limited ( ASSA ABLOY ) recommends that you consult ASSA ABLOY or its agents prior to placing an order to ascertain current information on specific products, as ASSA ABLOY reserves the right to make changes without notice. ASSA ABLOY will not be liable for any injury, loss or damage whatsoever, arising from any errors or omissions in the information contained in the brochure or arising from the use or application of the information contained herein copyright by ASSA ABLOY All rights reserved MC05903 ASSA ABLOY Australia Pty Limited ABN _08_V3.1