Evolve LED Roadway Lighting

Transcription

1 GE Lighting Solutions Evolve LED Roadway Lighting Scalable Cobrahead (ERS, ERS, ERS3 & ERS4) imagination at work

2 Product Features From local to major roadways, the GE Evolve LED Roadway Scalable Cobrahead fixtures are changing the way you light your lanes. Preserving the aesthetic look of traditional roadway Cobrahead fixtures, GE balances the technical needs of a sophisticated LED system with the functional demands of an outdoor fixture facing extreme weather hazards. GE s advanced LED optical design offers hundreds of photometric options to meet your precise lighting requirements, while delivering reduced glare and improved light control. The refined thermal management system incorporates a sleek and robust heat sink directly into the fixture to ensure maximum heat transfer and long LED life. The GE Evolve LED Roadway Scalable Cobrahead offers more than years of reliable service life to significantly reduce maintenance frequency and expense, based on a 50,000 hour life and hours of operation per day. This efficient fixture can yield up to a 50-percent reduction in system energy compared with standard HID systems, depending on roadway applications, and can also be paired with programmable dimming options for even greater savings and control. Applications Designed to meet recommended luminance and illuminance requirements for local to major roadway / street classifications. Housing Die cast aluminum housing. A modern design preserving the aesthetic look of traditional roadway Cobrahead fixtures incorporates the heat sink directly into the unit ensuring maximum heat transfer and long LED life. Meets G vibration per C For 3G rating contact manufacturer. Power door assembly with removable retention latch. LED & Assembly Structured LED array for optimized roadway photometric distribution. Evolve light engine consisting of scalable reflective technology designed to optimize application efficiency and minimize glare. Reverse facing light engine options available. Utilizes high brightness LEDs, 70 CRI at 4000K & typical. LM-79 tests and reports are performed in accordance with IESNA standards. Lumen Maintenance System rating is L85 at 50,000 hours. Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 50,000 hours. Mounting Slipfitter with +/- 5 degree of adjustment for leveling. Integral die cast mounting pipe stop feature. Wildlife intrusion protection at mounting pipe entry. Adjustable for in. or in. mounting pipe. Finish Corrosion resistant polyester powder painted, minimum.0 mil. thickness. Standard colors: Black and Gray. RAL & custom colors available. Electrical 0-77 volt and volt available. System power factor is >90% and THD <0%.* Class A audible sound rating. Integral surge protection: - For 0-77VAC per IEEE/ANSI C , 6kV/3kA Location Category B3 (0 Events). Optional high capability surge protection per IEEE/ ANSI C Rating - 0kV/5kA Location Category (0 events). - Rating - 6kV/3kA Location Category C-Low (5000 events). EMI: Title 47 CFR Part 5 Class A. Photo electric sensors (PE) available for all voltages. * System power factor and THD is tested and specified at 0V input and maximum load conditions. Warranty 5-year limited system warranty standard. Ratings / listed, suitable for wet locations per UL 598. IP65 rated optical enclosure per ANSI C Temperature rated at 40 to 50 C ( 40 to 45 C for ERS V fixtures). Upward Light Output Ratio (ULOR) = 0.

3 Ordering Number Logic Scalable Cobrahead (ERS) E R S 5 - _ _ - - _ - - _ Prod. ID Voltage Photometric Type Drive CURRENT LED Color temp PE Function COLOR OPTIONs E = Evolve R = Roadway S = Scalable = Assembly 0 = 0-77 H = = 0* = 08* 3 = 40* 4 = 77* 5 = 480* D = 347* *Specify single voltage only if fuse option is selected. AX = Extra Narrow BX = Narrow CX = (Short) DX = Forward (Very Short) EX = 5 = 55mA* 40 = 4000K 57 = *Standard drive current is 55mA. 350mA and 700mA drive currents designated with a 3 or 7 respectively are available and set at the factory. = None = PE Rec. 4 = PE Rec. with Shorting Cap 5 = PE Rec. with Control 7 = Dimming PE Receptacle * 9 = Dimming PE Receptacle with Shorting Cap PE control not available for multi-volt V. Must be a discrete voltage (347V or 480V). * Order dimming control PE as a separate item BLCK = Black GRAY = Gray Contact manufacturer for other colors. C = IEC Construction E = GE Level F = Fusing L = Tool-Less Entry P = Programmable Dimming (includes DALI) T = Extra Surge Protection* XXX = Special Options * Contact manufacturer for details and availability. When ordering PE function socket 7 or 9, a programmable dimming option P must also be ordered under the OPTIONS column typical initial lumens typical system wattage IES File Numbers photometric TYPE 4000K 0-77V V 4000K AX BX AX CX AX BX BX CX AX BX CX CX AX BX DX CX AX BX EX CX

4 Photometrics Scalable Cobrahead (ERS) ERS Extra Narrow Medium (CXAX) 5,500 Lumens GE45489.ies ERS Narrow Medium (CXBX) 5,700 Lumens GE ies ERS Short (CXCX) 5,600 Lumens GE ies ERS Forward Very Short (CXDX) 5,700 Lumens GE ies ERS Medium (CXEX) 5,400 Lumens GE ies ISO Plot Polar Curve CU Graph Polar Trace Vertical and Horizontal Plane through Horizontal Angle of Maximum Candlepower Grid Distance in Units of Mounting Height at 30 Initial Footcandle Values at Grade Coefficients of Utilization Street Width / Mounting Height

5 Ordering Number Logic Scalable Cobrahead (ERS) E R S 5 - _ _ - - _ - - _ Prod. ID Voltage Photometric Type Drive CURRENT LED Color temp PE Function COLOR OPTIONs E = Evolve R = Roadway S = Scalable = Assembly 0 = 0-77 H = = 0* = 08* 3 = 40* 4 = 77* 5 = 480* D = 347* *Specify single voltage only if fuse option is selected. AX = Extra Narrow BX = Narrow CX = (Short) DX = Forward (Very Short) EX = 5 = 55mA* 40 = 4000K 57 = *Standard drive current is 55mA. 350mA and 700mA drive currents designated with a 3 or 7 respectively are available and set at the factory. = None = PE Rec. 4 = PE Rec. with Shorting Cap 5 = PE Rec. with Control 7 = Dimming PE Receptacle * 9 = Dimming PE Receptacle with Shorting Cap PE control not available for multi-volt V. Must be a discrete voltage (347V or 480V). * Order dimming control PE as a separate item BLCK = Black GRAY = Gray Contact manufacturer for other colors. C = IEC Construction D = Dimming (55mA) E = GE Level F = Fusing L = Tool-Less Entry P = Programmable Dimming (includes DALI) T = Extra Surge Protection* XXX = Special Options * Contact manufacturer for details and availability. When ordering PE function socket 7 or 9, a dimming option D or programmable dimming option P must also be ordered under the OPTIONS column typical initial lumens typical initial lumens typical system wattage IES File Numbers photometric TYPE 4000K 0-77V V 4000K DX EX FX AX GX HX DX EX FX BX GX HX DX EX FX CX GX HX DX EX FX DX GX HX DX EX FX EX GX HX House side photometry options available (using reverse facing light engines). Contact manufacturer for more information.

6 Photometrics Scalable Cobrahead (ERS) ERS Extra Narrow Medium (HXAX) 0,800 Lumens GE ies ERS Narrow Medium (HXBX),300 Lumens GE ies ERS Short (HXCX),00 Lumens GE45464.ies ERS Forward Very Short (HXDX),00 Lumens GE45497.ies ERS Medium (HXEX) 0,600 Lumens GE45464.ies ISO Plot Polar Curve CU Graph Grid Distance in Units of Mounting Height at 30 Initial Footcandle Values at Grade Polar Trace Vertical and Horizontal Plane through Horizontal Angle of Maximum Candlepower Coefficients of Utilization Street Width / Mounting Height

7 Ordering Number Logic Scalable Cobrahead (ERS3) E R S _ _ - - _ - - _ Prod. ID E = Evolve R = Roadway S = Scalable 3 = Assembly Voltage 0 = 0-77 H = = 0* = 08* 3 = 40* 4 = 77* 5 = 480* D = 347* *Specify single voltage only if fuse option is selected. typical initial lumens Photometric Type AX = Extra Narrow BX = Narrow CX = (Short) DX = Forward (Very Short) EX = Drive CURRENT 5 = 55mA* 40 = 4000K 57 = *Standard drive current is 55mA. 350mA and 700mA drive currents designated with a 3 or 7 respectively are available and set at the factory. typical initial lumens typical system wattage LED Color temp photometric TYPE 4000K 0-77V V 4000K PE Function = None = PE Rec. 4 = PE Rec. with Shorting Cap 5 = PE Rec. with Control 7 = Dimming PE Receptacle * 9 = Dimming PE Receptacle with Shorting Cap PE control not available for multi-volt V. Must be a discrete voltage (347V or 480V). * Order dimming control PE as a separate item When ordering PE function socket 7 or 9, a dimming option D or programmable dimming option P must also be ordered under the OPTIONS column IES File Numbers COLOR BLCK = Black GRAY = Gray Contact manufacturer for other colors. OPTIONs C = IEC Construction D = Dimming (55mA) E = GE Level F = Fusing L = Tool-Less Entry P = Programmable Dimming (includes DALI) T = Extra Surge Protection* XXX = Special Options * Contact manufacturer for details and availability. JX KX LX AX MX NX JX KX LX BX MX NX JX KX LX CX MX NX JX KX LX DX MX NX JX KX LX EX MX NX House side photometry options available (using reverse facing light engines). Contact manufacturer for more information.

8 Photometrics Scalable Cobrahead (ERS3) ERS3 Extra Narrow Medium (NXAX) 5,900 Lumens GE45497.ies ERS3 Narrow Medium (NXBX) 6,700 Lumens GE ies ERS3 Short (NXCX) 6,400 Lumens GE ies ERS3 Forward Very Short (NXDX) 6,600 Lumens GE ies ERS3 Medium (NXEX) 5,600 Lumens GE ies ISO Plot Polar Curve CU Graph Polar Trace Vertical and Horizontal Plane through Horizontal Angle of Maximum Candlepower Grid Distance in Units of Mounting Height at 30 Initial Footcandle Values at Grade Coefficients of Utilization Street Width / Mounting Height

9 Ordering Number Logic Scalable Cobrahead (ERS4) E R S _ _ - - _ - - _ Prod. ID Voltage Photometric Type Drive CURRENT LED Color temp PE Function COLOR OPTIONs E = Evolve R = Roadway S = Scalable 4 = Assembly 0 = 0-77 H = = 0* = 08* 3 = 40* 4 = 77* 5 = 480* D = 347* *Specify single voltage only if fuse option is selected. AX = Extra Narrow BX = Narrow CX = (Short) DX = Forward EX = 5 = 55mA* 40 = 4000K 57 = *Standard drive current is 55mA. 350mA and 700mA drive currents designated with a 3 or 7 respectively are available and set at the factory. = None = PE Rec. 4 = PE Rec. with Shorting Cap 5 = PE Rec. with Control 7 = Dimming PE Receptacle * 9 = Dimming PE Receptacle with Shorting Cap PE control not available for multi-volt V. Must be a discrete voltage (347V or 480V). BLCK = Black GRAY = Gray Contact manufacturer for other colors. C = IEC Construction D = Dimming (55mA) E = GELevel F = Fusing L = Tool-Less Entry P = Programmable Dimming (includes DALI) T = Extra Surge Protection* XXX = Special Options * Contact manufacturer for details and availability. * Order dimming control PE as a separate item When ordering PE function socket 7 or 9, a dimming option D or programmable dimming option P must also be ordered under the OPTIONS column typical initial lumens typical initial lumens typical system wattage IES File Numbers photometric TYPE 4000K 0-77V V 4000K PX QX RX AX SX TX PX QX RX BX SX TX PX QX RX CX SX TX PX QX RX DX SX TX PX QX RX EX SX TX House side photometry options available (using reverse facing light engines). Contact manufacturer for more information.

10 Photometrics Scalable Cobrahead (ERS4) ERS4 Extra Narrow Medium (TXAX) 0,900 Lumens GE ies) ERS4 Narrow Medium (TXBX),900 Lumens GE ies ERS4 Short (TXCX),500 Lumens GE ies ERS4 Forward Very Short (TXDX),800 Lumens GE45507.ies ERS4 Medium (TXEX) 0,500 Lumens GE ies ISO Plot Polar Curve CU Graph Grid Distance in Units of Mounting Height at 30 Initial Footcandle Values at Grade Polar Trace Vertical and Horizontal Plane through Horizontal Angle of Maximum Candlepower Coefficients of Utilization Street Width / Mounting Height

11 Product Dimensions.3 in. [54 mm] Scalable Cobrahead (ERS) 4 in. [368 mm] Adjustable for -/4 to in. mounting pipe (.660 to.375 inch OD) [4 to 60 mm OD] 4 in. [4 mm] 7.0 in. [77mm] 5.4 in. [36 mm].8 in. R [300 mm R].3 in. [54 mm] 4 in. [368 mm] DATA Approximate Net Weight: 0 to 5 lbs. (9.07 to.34 kgs.) Contact manufacturer for specific configuration weight. Effective Projected Area (EPA): 0 sq. ft. max (0.046 sq. m) 5.9 in. [659 mm] Scalable Cobrahead (ERS) 4 in. [368 mm] Adjustable for -/4 to in. mounting pipe (.660 to.375 inch OD) [4 to 60 mm OD] 4 in. [4 mm] 7.0 in. [77mm] 5.4 in. [36 mm].8 in. R [300 mm R] 5.9 in. [659 mm] 4 in. [368 mm] DATA Approximate Net Weight: 5 to 9 lbs. (.34 to 3 kgs.) Contact manufacturer for specific configuration weight. Effective Projected Area (EPA): sq. ft. max (0.065 sq. m)

12 Product Dimensions Scalable Cobrahead (ERS3) Scalable Cobrahead (ERS4) 37.3 in. [947 mm] 5.0 in. [380 mm] Adjustable for -/4 to in. pipe (.660 to.375 inch OD) [4 to 60 mm OD] 4 in. [4 mm] 7.0 in. [77mm] 5.4 in. [36 mm] 4.7 in. R [373 mm R] 37.3 in. [947 mm] 5.0 in. [380 mm] DATA Approximate Net Weight: 40 to 46 lbs. (8.4 to 7 kgs.) Contact manufacturer for specific configuration weight. Effective Projected Area (EPA): sq. ft. max (0.093 sq. m) GE Lighting Solutions -888-MY-GE-LED GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. Evolve and the GE brand and logo are trademarks of the General Electric Company. 0 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. OLP-900 (Rev. /8/)