Once the Server Manager has initialized click on Add roles and features

Transcription

1 Steps: Install Windows Features. Configure SNMP Services. Configure SCOM. Install Windows Features Open up server manager. Once the Server Manager has initialized click on Add roles and features

2 Leave Role-based or feature-based installation as default and click Next.

3 Leave the default and then click Next.

4 Click Next on the roles section.

5 Scroll down on the features section until you find SNMP. Press the arrow on the left to expand it. Click both checkboxes.

6 Once you have clicked the checkboxes in the previous screen then this window will come up. Click the Add Features button.

7 Now that both are selected the Next button enables, click Next to continue.

8 Click the Install button.

9 Installation starting.

10

11 Feature installation busy. You can click the Close button and monitor the install from Server Manager.

12 Once the installation has completed click the close button. Configure SNMP Services Open up Services (you can click start -> Run -> Services.msc) Disable the SNMP Trap Service. Make sure the SNMP Service is started and set to Automatic.

13 Right Click on SNMP Service and select properties. Click on the Security Tab. Click on the Add button.

14 Select the Community Rights. Type in the Community Name. Click the Add button. The details will now show under the Accepted Community Names Section. Click OK.

15 Configure SCOM. Open up the SCOM console. Step 1 -> Click on the Authoring Tab. Step 2 -> once the menus have refreshed click on the Rules line.

16 Step 1 -> Right Click Rules. Step 2 -> Click on Create a new rule

17 The Create Rule Wizard screen will come up as shown above.

18 Expand Collection Rules -> Event Based. Click on SNMP Trap (Event). We are going to create a new management pack for rules. Click the New button as shown above.

19 Step 1 -> Enter in the Name. Step 2 -> Click Next.

20 If you want to add in a knowledge Article click the Edit button. Click on Create. Click Next on the following screen.

21 Now we are going to create a new Rule. Step 1 -> Give the rule a name. Step 2 -> Click on the Select button.

22 Step 1 -> In the box type in Node and then click on View all Targets. Press Enter. Click on Node and then Step 2 -> Click the OK button.

23 Once you have selected Node in the previous screen it will now show under the Rule Target Click the Next button.

24 We cannot leave this screen blank so enter in Click on the create button.

25 Make sure you are on the Authoring Tab, have selected Rules. In the Look For: button type in Node. Scroll down till you find the type: Node and the name of the rule we just created.

26 Right click on the name (Step 1) Click on Properties. (Step 2)

27 Step 1 -> Click the Configuration Tab. Step 2 -> Click on the Edit button.

28 Double click the object identifier we created earlier and delete the information. Click OK. Discover SNMP Devices

29 Step 1 -> Click the Administration tab. Step 2 -> Click on Discovery Rules.

30 Step 1 -> Right click Discovery Rules. Step 2 -> Click on the Discovery Wizard option.

31 Step 1 -> Click on Network Devices. Step 2 -> Click the Next button.

32 Step 1 -> Enter in a name. Step 2 -> Select your management server. Step 3 -> Click on the Create Resource Pool button.

33 Step 1a -> Enter in the Name for the New Resource Pool. Optional - > give a description. Step 2b -> Click Next.

34 Click the Add Button.

35 Step 1 -> Click the Search button. Step 2 -> Click the name of your management server. Step 3 -> Click the Add button. After you have completed step 3 your management server will show under the Selected Items section. Click OK.

36 Click Next.

37 Click the Create Button.

38 Once it s complete click the Close button.

39 Now that we have created a new resource pool it will list under the Available Pools section. Click Next.

40 We going to use Recursive Directory click the radio button. Click the next button.

41 On Default Accounts page we need to create an account. Step 1 -> Click on the Create Account button.

42 Step 1 -> Type in a display name. Step 2 -> Click Next.

43 Step 1 -> Enter in the community string. Step 2 -> Click the Create button.

44 The account we just created will be selected. Click Next.

45 On this screen click the Add button.

46 Enter in the name or IP address. Make your other selections. Click OK.

47 The information created in the previous screen will now show under Devices. Click Next.

48 Leave the default selected. Click Next.

49 Click Next.

50 Make your selection. Click the Next button.

51 On the summary screen confirm your settings. Click the Create button.

52 When the following Warning comes up, make your selection. I click Yes.

53 Progress screen.

54 Once it finishes we can run the discovery wizard. Leave the checkbox selected and then click the close button.

55 Once you have clicked close the page above shows the progress circle. As seen above we now see a status of Pending. If you click on Network Devices Pending Management you will see any errors.