mobile LCD monitor Instruction manual

Transcription

1 mobile LCD monitor Instruction manual

2 Content 5 Chapter 1 Safety instructions 7 Chapter 2 The monitor 7 The LCD monitor 9 Remote control 11 Power supply 11 Indicator lamp 12 Chapter 3 Basic operation 12 Sound volume 12 Mute sound 13 Adjusting the picture setting 13 Choosing an input mode 14 Chapter 4 Function selection 15 Chapter 5 VGA mode 16 Chapter 6 Further features 16 Sleep time 16 Listening with earphones 17 Connecting other devices 18 Chapter 7 Troubleshooting 20 Chapter 8 Specifications 20 Technical data 20 Connections 21 Delivery contents 2 3

3 Safety instructions 1 Dear Customer: Congratulations on purchasing the ZELO M8 LCD monitor. To enjoy the features that this monitor has to offer and to ensure safety and years of trouble-free operation, please read and follow all operating and maintenance instructions found in the instruction manual thoroughly and retain this manual for future reference. A declaration of CE conformity has been established for this product. Certification has been documented and entrusted to the manufacturer. 1. Never attempt any maintenance or repairs yourself. If something appears strange, please turn the monitor off and consult your dealer. The monitor is composed of many delicate electronic components that can be damaged or broken if you open the monitor or attempt to modify it. 2. Do not expose the monitor to high humidity, dust, steam, oil or smoke. Avoid dropping the unit and strong impact. 3. Never use abrasive cleaning agents or cleaners containing solvents. Wipe the monitor off with a soft cloth if it gets dirty. 4. Do not leave the monitor in excessively hot or cold places. Permissible storage temperatures are within the range of 25 C to +60 C. Permissible operation temperatures are within the range of 0 C to +40 C. 5. Only use specified adapters/power sources recommended by the manufacturer. 6. Turn the unit off and remove the adapter when not in use. For your safety, the driver should not watch TV or operate the controls while driving. Please note that watching and operating the TV while driving are prohibited by law in some countries. Light or dark colored dots that appear during operation do not mean that the device is broken or defect. These dots are common in TFT/LCD technology. 4 Chapter 1 Safety instructions 5

4 The monitor 2 The LCD monitor LCD panel 2. Logo and control light for ON/OFF 3. Source select buttons (AV, S-Video and VGA) and navigation p q 4. Power button: to turn on and off (3 seconds long press to turn on) 5. Format select buttons: 4:3 and 16:9 6. Source select buttons (AV, S-Video and VGA) 7. Stereo speakers 8. OK button: for menu confirmation 9. VOL / VOL+ button and navigation t u 10. MENU button 11. ANS button: to change volume, brightness, contrast, color and tint 12. VOL / VOL+ button 6 Chapter 1 Safety instructions Chapter 2 The monitor 7

5 Remote control VGA input 14. S-Video input Input socket sound audio R/L (red/white connector) 16. AV input socket picture (yellow connector) 17. AV out 18. Earphone socket 19. Screw hole circle (for stand attachment) 20. Support stand 21. DC power input socket 22. Support stand locks 8 Chapter 2 The monitor Chapter 2 The monitor 9

6 1. POWER button: to put the monitor off 2. VOL /VOL+ 3. SOURCE: to select AV1 or AV2 4. LANGUAGE: to select the OSD language 5. MIRROR: to mirror the picture 6. MUTE: used to enable or disable the audio 7. MENU: displays the Menu on the screen 8. ANS: to select brightness, contrast, color, tint adjusting mode 9. FORMAT: to turn the 16:9 or 4:3 picture Power supply For use at home: Connect the included adapter to a wall outlet and then the DC output plug to your monitor to supply your monitor with power. Press the POWER switch for approx. 3 seconds to turn the monitor on. Please make sure that the power adapter coincides with the voltage specification of your wall outlet. For use in the car (DC 12 V): Connect the included car adapter to your cars cigarette lighter and then the DC output plug to your monitor. Press the POWER switch approx. 3 seconds to turn the monitor on. Indicator lamp The logo on the device illuminates white during operation. 10 Chapter 2 The monitor Chapter 2 The monitor 11

7 Basic operation 3 Sound volume 1. Press the VOL+ button to increase the volume. The indicator segment increases. 2. Press the VOL button decrease the volume. The indicator segment decreases. Adjusting the picture setting 1. Press the ANS button to select a volume, brightness, contrast, color, or tint setting (tint adjustments can only be performed in NTSC system). 2. Press VOL+/VOL button to adjust the brightness, contrast, color and tint. The following progress bar is an example of a brightness setting adjustment. To mute sound 1. Press the MUTE button to eliminate the sound. The MUTE indicator will be displayed on screen. Color adjustments can only be made in the NTSC system. The PAL standard system should be used in Europe. Choosing the input Press the SOURCE (SR+/SR ) button respectively to choose between an AV, S-Video and VGA mode. 2. Press the MUTE or VOL+/VOL button to return to the previous sound level. 12 Chapter 3 Basic operation Chapter 3 Basic operation 13

8 4 5 Function selection VGA mode 1. Press the MENU button to display the FUNCTION menu. 2. Navigate with the SOURCE p,q button to select a function. 3. Press the VOL+/VOL button for function setting adjustments. The following menu is displayed on screen. Connect this monitor to a notebook or computer and use it as a computer monitor. Use a VGA cable (not included in delivery) to connect your monitor to a notebook or computer. 1. Press the SOURCE button on the remote control or the SR+, SR button on the device respectively until VGA is displayed on screen. 2. Turn on your computer. 3. Your computer s desktop picture will now appear on the monitor s screen. FUNCTION Note: Please note that high resolutions are not supported. Different settings are possible depending on the graphic card model. Try the lowest resolution first and then increase afterwards. Resolutions up to 960 x 600/70 Hz are supported. Higher resolutions up to 1088 x 612/ 70 Hz for advanced display settings. Troubleshooting: Most times your VGA port has to be activated when connecting a notebook. Please refer to the notebook instruction manual first, before connecting. If a monitor driver has been installed, select standard monitor and 70 Hz at the advanced display settings. 1. Language Navigate with the SOURCE p,q button to LANGUAGE. Press the VOL+/VOL button on the device or the LANGUAGE button on the remote control to change the language. 2. Picture up MIRROR Navigate with the SOURCE p,q button to MIRROR. Press the VOL+/VOL button on the device or the MIRROR button on the remote control to select a normal or mirrored picture. For centering the picture press the MENU button and change the values for H position and V position with the t, u, p, q buttons. Note: At VGA mode no color setting possible. 3. Aspect mode Navigate with the SOURCE p,q button to ASPECT. Press the VOL+/VOL button on the device or the ASPECT button on the remote control to select a 16:9 or 4:3 viewing format. 4. Picture up and down Navigate with the SOURCE p,q button to DOWN. Press the VOL+/VOL button on the device for up or down picture selection. 14 Chapter 4 Function selection Chapter 5 VGA mode 15

9 Further features 6 Sleep time Press the SLEEP TIME button to select the sleep time from 0 to 240 minutes. Listening with earphones Plug the earphones into the 3.5 mm jack located on the right side of the device (can be identified by the symbol earphones ). Connecting other devices Press the SOURCE buttons on the remote control or the SR+/SR buttons on the device respectively until AV, S-Video or VGA is displayed on screen. You can connect this device to an external source, such as a DVD player, satellite receiver or video recorder as follows. Use the adapter cable for connecting the devices. Picture and Sound: Input terminals Red/White: audio channels stereo, right/left Yellow: video channel Note: No sound can be heard from the main speakers, when the earphones are connected to the device. Please refer to your external devices instruction manual before connecting. The AV mode allows you to make diverse setting adjustments, for example, Volume, Picture and Sleep mode adjustments. 16 Chapter 6 Further features Chapter 6 Further features 17

10 Troubleshooting 7 Problem Solution Remote control is not functioning properly. Check if the batteries have sufficient power/replace batteries. There is no picture or sound. Make sure the AC adapter is connected properly to the power outlet/adapter terminal. Make sure the remote sensor is not exposed to strong light. Make sure that all cables have been connected to their respective jacks.. Make sure that the right input is selected. Doubled picture Check that there are no electromagnetic waves that could influence the device. No picture Make sure that all cables have been connected to their respective jacks.. Spotted picture There may be interference from automobiles, trains, high voltage lines, etc. No sound Check that the MUTE button has not been activated or that the volume has not been adjusted to a minimum. Check that no earphones have been connected. Make sure that all cables have been connected to their respective jacks.. No color Check the color contrast setting and if the correct color system is chosen (standard system in Europe is PAL). Picture too bright or bad colors Check the color contrast setting and if the correct color system is chosen (PAL / NTSC). Check the contrast and brightness settings. Picture is too dark. Check the contrast and brightness settings. 18 Chapter 7 Troubleshooting Chapter 7 Troubleshooting 19

11 Specifications 8 Technical data 8 inch LCD monitor (20,3 cm) Dimensions: 246 x 166 x 39 mm Weight: approx. 850 g 16:9 wide screen format Pixel: 800 x 3 x 480 Video color system: PAL/NTSC Brightness: 200 cd/m 2 Backlight: LED Viewing angle: horizontal: 130, vertical: 110 Amplifier for sound: 2 x 0.25 W Speakers: 2 x 4 cm (diameter) Power consumption: 8 W Power supply: V DC (car adapter) V adapter Delivery contents Please check contents thoroughly after purchasing. Mobiler 16:9 LCD monitor Adapter ( V) Car adapter Car bag for headrest attachment Earphones A/V cable Stand Remote control Instruction manual Connections AV AV out S-Video VGA Earphone jack 12 V input 20 Chapter 8 Specifications Chapter 8 Specifications 21

12 Service Hotline: +49 (0) 53 02/ Address: x-services.eu gmbh Service department X4-TECH Brackestraße 3 D Vechelde Germany Manufacturer information x-peer.de GmbH Brackestraße Vechelde Germany Telephone +49 (0) 53 02/ Fax +49 (0) 53 02/ Internet: info@x-peer.de 22 23

13 24 Version 2.2 1/2010