Servohydraulic Universal Material Testing Machines Series TTM kn
|
|
- Magdalene Beasley
- 7 years ago
- Views:
Transcription
1 Servohydraulic Universal Material Testing Machines Series TTM kn Precision according to ISO , class 0.5 The Series TTM from is a family of testing machines ranging in capacity from 100 kn up to 3000 kn. TTM Tensile Testing Machine is a registered trademark of.
2 The Series TTM Testing Machines are state-of-the-art, rugged and durable designed especially suitable for high capacity testing of round, flat and profile specimens meeting the needs of the metals, aerospace, automotive and fastern industries. Available in two or four column construction capable to provide accurate, repeatable and reliable results for tensile, compression, flexure, peel, shear, tear or friction tests on a wide range of different materials for quality control, product development, research or process development. Wide Range of Application: Testing systems for brittle materials such steel or fasteners requires high stiffness load frames that minimize the amount of deformation energy that is stored in the frame. Its essential to minimize the released energy from the frame for minimum maintenance and low reaction at specimens failure. With this in mind all models of the TTM family features high rigid load frames either in two or four column construction with superior axial and lateral stiffness and precision aligned for advanced static testing. To meet the wide variety of testing needs of laboratories and manufacturers in the field of metals, automotive, aerospace, fastener a.s.o industries offers the TTM in different configurations. This Testing Machines are available with the universal testing software DIONSTAT which provides most EN, ISO, DIN or ASTM and other standards tests. Features: rigid 2- or 4-column-construction providing superior axial and lateral stiffness and precision aligned Single workspace-design with convenient working height Double acting servo-actuator mounted on top of the crossbeam Long piston stroke for the most convenient and easy adjustment and testing of different sample lengths Upper crosshead movable to increase distance between grips Actuator with anti-rotation system to prevent the natural tendency of the actuator to rotate Servovalve attached direct on actuator providing close-coupled servovalve and accumulators for improved performance and reduced pressure fluctuations With digital displacement transducer for the best positioning and measuring accuracy With chrome plated columns for easy cleaning and longest life Manual or hydraulic operated wedge or parallel grips available Including grip control system mounted direct at the machine Compression platens or bending / folding devices may be fixed directly into wedge grips.
3 The servoactuator, which is integrated in the upper crosshead, having a long piston stroke makes testing space accessible for easy and efficient testing of different samples lengths. The long piston stroke meets the extreme requirements of international standards without changing the crosshead adjustment. On piston rod end a anti-rotation system prevents the natural tendency of the actuator to rotate. All TTM Testing Machines are equipped with ah high resolution (0.82 µm) digital displacement transducer for accurate and reliable closed loop position of actuator, piston stroke control and measurement. The manifold is attached direct on actuator providing close-coupled servovalve and accumulators for improved performance and reduced pressure fluctuations. The Moog-Servovalve features high force level permanent magnet linear force motor directly driving the spool. A LVDT is attached to the spool to provide spool position feedback. An internal loop is closed around the spool position. The valve provides additionally low hysteresis and low threshold, low current consumption at and near hydraulic null, standardized spool position monitoring signal with residual ripple, electric null adjust and with loss of supply voltage or broken cable or emergency stop, the spool returns to its spring centered position without passing a load move position. The precision load cell is located between base platen and lower grip, providing high accuracy test after test. The load cell additionally features excellent repeatability, compact design, low temperature drift and accessible mounting. Ergonomically design with unchanged height of lower grip and accessible test space for easy and efficient testing. With chrome plated columns for easy cleaning and longest life. The TTM Testing Machines can be installed on factory-floor without require any special foundation. Standard delivery includes pads which can be put between machine and floor. Upper Crosshead: As standard TTM features mechanical movable upper crosshead but are also available with fixed or automatic unlocking and hydraulic adjustable lift system. with mechanical movable upper crosshead with passive clamping system incl. hydraulic unlocking and lift system
4 Series TTM kn in two-column construction Technical Data: Type TTM max. Test load kn Piston stroke mm Distance between wedge grips max. mm Distance between columns mm Column diameter mm Working height mm Width mm Depth mm Height mm Weight with wedge grips kg Frame stiffness kn/mm Subject to technical modifications.
5 Series TTM Big kn in four-column construction Technical Data: Type TTM 500 / max. Test load kn 500 / Piston stroke mm Distance between wedge grips max. mm Distance between columns mm 520 x x x x 450 Column diameter mm Working height approx. mm Width mm Depth mm Height mm Weight with wedge grips approx. kg Frame stiffness kn/mm Subject to technical modifications.
6 Servoydraulic Universal Material Testing Machines Series LF (SV) kn according to ISO , class 0.5 The LF (SV) Series from is a family of Testing Machines ranging in capacity from 50 kn up to 600 kn.
7 The LF(SV) test system is modular constructed and can be configured with a variety of grips and fixtures, extensometers, different software packages and other accessories to suits your specific testing needs. The LF (SV) Testing Machines are ergonomically designed floor standing machines for tensile, compression, bending or shear but also strain and other more advanced tests on a wide range of different materials. Wide range of application: To meet the wide variety of testing needs of laboratories and manufacturers offers the LF (SV) in different configurations. This Testing Machines are available with the universal testing software DIONSTAT which provides most EN, ISO, DIN or ASTM and other standards tests. Features: Very compact design to fit also in laboratories with reduced ceiling height Rigid machine frame with high axial and lateral stiffness Precision aligned One chamber design Adjustable upper crosshead Strain gauge load cell mounted on the upper traverse for tensile-, compression- and alternating load With digital displacement transducer Linear actuator in servo-quality with displacement transducer is fitted in machines base Columns are chrome plated for easy cleaning and longest life Manifold is attached direct on actuator providing close-coupled servovalve Load Cell: The precision load cell, which is mounted on crosshead, is overload protected. In combination with the high-resolution digital controller class 0.5 according to ISO , EN , and other international standards can be reached. If you work with additional load cells, the electronic system features a self-identification of the transducers. Available in a variety of configurations: The LF(SV) material testing machine are available with different standard configurations. All options as: Extended test space or distance between columns, other actuator strokes, protection device for operators safety, additional low force transducers a.s.o are available.
8 Series LF 50 to 600 kn The LF models are available with manual control console with digital display or with digital controller for closed loop testing in connection with software package DIONSTAT. This series is available in force ratings from 50 kn up to 600 kn as standard machines. All machines having a long piston stroke and additional movable upper crosshead. Technical Data: Type LF 50/60 100/ / /600 max. Test load kn 50/60 100/ / /600 Piston stroke mm Distance between wedge grips min. mm Distance between wedge grip max. mm Distance between columns mm Column diameter mm Working height mm Width mm Depth mm Height mm Weight with wedge grips kg Frame stiffness kn/mm Subject to technical modifications.
9 Series LFSV 50 to 600 kn Compared with the LF Model the LFSV Series of Testing Machines features a hydraulically movable upper crosshead through two long stroke actuators for easy re-positioning. In combination with its actuator in the base the height of this machines is considerable low in order that even machines with higher capacity fits into laboratories with reduced ceiling heights. Otherwise TTM Series of testing machine with actuator on top are recommended. Technical Data: Type max. Test load kn Piston stroke mm Distance between wedge grip mm Distance between columns mm Column diameter mm Working height mm Width mm Depth mm Height mm Weight with wedge grips kg Frame stiffness kn/mm H Sd Ph LW Kh A B x T Subject to technical modifications.
10 Hydraulic Power Supply For the Hydraulic Testing Machines offers different solutions for the hydraulic power supply depending on machine capacity, configuration and customers laboratory. Standard Solutions: 19 Standard Console for Lower Machine Capacities Dual 19 Standard Console for Higher Machine Capacities Free Standing Hydraulic Power Pack 19 Standard or Dual 19 Standard Consoles: with integrated hydraulic power pack in the base of the console providing effective floor space utilization. This compact and easy to install Consoles with its in the lower part integrated hydraulic power pack allows in the upper parts an ergonomically integration of all necessary peripheral equipment like personal computer, screen, keyboard, digital controller etc. The hydraulic power pack is equipped with internal gear pumps so that it operates on a low noise level. The tank is put on anti-vibration elements to avoid any vibrations on the console. As alternative the console can be placed on rollers and equipped with fast coupling if there is any universal use intended. Free Standing Hydraulic Power Packs Series PAC The PAC series includes models with flow ratings up to 52 l/ min. The PAC Standard Power Supplies are primarily used for Hydraulic Testing Machines with force ratings of 1500 kn or higher, increased testing speeds or if external power supplies are necessary because of available space in the laboratory. As working places 19 Racks or table version are available.
11 Grips and Fixtures When it comes to grips and fixtures for Hydraulic Testing Machines you can choose from a extensive range. All grips and fixtures are available in a variety of sizes and configurations to suits your application needs. The range includes not only mechanical but also hydraulic wedge, parallel or non-shift grips. Compression platens, bend or different shear fixtures are also available to satisfy almost any testing requirement. Our internal machine shop provides great flexibility in tailoring all fixtures and grips to the specific material, temperature and condition being tested.
3. Standards: Comply with ISO, BS, ASTM, JIS standard and so on.
INFORMATION Computerized Electronic Universal Testing Machin 1. Functions and Features: is high level computer controlled electronic UTM, dual space structure, tensile test executed at upper side of crosshead,
More informationComputerized Electronic Univesal Testing Machine WDW-20Y
1 1. Functions and Features: 1.1 is high level computer controlled electronic UTM, dual space structure, tensile test executed at upper side of crosshead, compression 1.2 Main components is imported brand,
More informationtesting equipment for quality management Programme summary. METROLOGY Tensile and Pressure Testing Machines Measuring Devices Display Devices
testing equipment for quality management Programme summary. METROLOGY Sheet metal testing Surface testing Corrosion testing Tensile and Pressure Testing Machines Measuring Devices Display Devices The physical
More informationPLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationConcrete 37 Compression machine accessories. ADR-Auto Console. Load Calibration Devices. Compression Machine Accessories
37 Compression machine accessories Compression Machine Accessories The selection and use of the correct accessories is essential if the range of machines described in Section 36 is to be utilised to its
More informationD634-P Series Direct Drive Proportional Valve with Integrated 24 V Electronics ISO 4401 Size 05
D634-P Series Direct Drive Proportional Valve with Integrated 24 V Electronics ISO 4401 Size 05 GENERAL SECTION PAGE MOOG SERVO- AND PROPORTIONAL CONTROL VALVES General 2 enefits and Functionality 3 General
More informationCOMPACT. Drilling COMPACT
COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.
More informationHollow Cylinder Apparatus (GDS SS-HCA)
HCA:1 Options available for SS-HCA Axial Load/Torque 1kN/1Nm 1kN/2Nm 12kN/2Nm 15kN/4Nm Dynamic upgrade frequencies Hollow Cylinder Apparatus (GDS SS-HCA).5Hz 2Hz 1Hz 5Hz Sample Height/Outer Ø/Inner Ø 2/1/6mm
More informationAlternative Linear Motion Systems. Iron Core Linear Motors
Alternative Linear Motion Systems ME EN 7960 Precision Machine Design Topic 5 ME EN 7960 Precision Machine Design Alternative Linear Motion Systems 5-1 Iron Core Linear Motors Provide actuation forces
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
More informationReaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
More informationPrecision Miniature Load Cell. Models 8431, 8432 with Overload Protection
w Technical Product Information Precision Miniature Load Cell with Overload Protection 1. Introduction The load cells in the model 8431 and 8432 series are primarily designed for the measurement of force
More informationSeries 6000 Torque measured metal bellow coupling
Properties Free of float metal bellow coupling with integrated torque measurement Non-contact measurement system, high robustness High torsional stiffness Limited torque of inertia Performance Measurement
More informationSITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS drive system for powerful forces on a short stroke hydraulic actuation closing force
More informationMaterial test chamber with mechanical convection
FP series 400 Material test chambers Material test chamber with mechanical convection A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and
More informationSITEMA PowerStroke. Technical Information TI-P12. 1 Function. 2 Applications. Mould Closing Devices series FSKP. Contents
SITEMA PowerStroke FSP ocking, actuating and releasing by pneumatic pressure English translation of German original Technical Information TI-P1 SITEMA PowerStroke Mould Closing Devices series FSP drive
More informationCompany Vision. GCTS: Global Presence
Company Vision GCTS is internationally renowned for its high quality testing systems and client care. The design approach GCTS has utilized, emphasizes the importance of the customer needs. It is this
More informationVacuum drying oven for non-flammable solvents
VD series 53 Vacuum drying ovens Vacuum drying oven for non-flammable solvents A BINDER vacuum drying oven of the VD series is impressive while gently drying with its homogeneous temperature distribution.
More informationMounting Instructions. Torque Transducer. A0329 3.2 en
Mounting Instructions Torque Transducer T5 T5 Contents 3 Page Safety instructions.............................................. 4 1 Measuring characteristics..................................... 7 2 Mounting.....................................................
More informationKey data. The practical machines for your specific grinding solution. A member of the United Grinding Group. The Art of Grinding.
The Art of Grinding. A member of the United Grinding Group CT450 / CT550 The practical machines for your specific grinding solution. Key data The CT450 / CT550 are very flexible internal cylindrical grinding
More informationSCHMIDT ManualPress 300 Series Manual Presses with Process Monitoring
Manual Presses with Process Monitoring Process reliability, force/stroke monitoring of the joining process and EN ISO- compatible documentation of the results are becoming the major factors for small and
More informationDIGITAL DISPLACEMENT RISING STEP LOAD LRA/RSL TEST EQUIPMENT
DIGITAL DISPLACEMENT RISING STEP LOAD LRA/RSL TEST EQUIPMENT BACKGROUND AND PRODUCT DESCRIPTIONS Fracture Diagnostics provides state-of-the-art test equipment, utilizing the Rising Step Load testing technique.
More informationThere are as many reasons to test metals as there are metals:
Testing Their Mettle Metals testing procedures ensure quality in raw materials and finished products BY BILL O NEIL, ADRIAN RIDDICK, FRANK LIO, PAUL KING, CHRIS WILSON, AND PATTY HARTZELL There are as
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
More informationDUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy
More informationHIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT
HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT MAXIMATOR GmbH 2 MAXIMATOR has an extensive know-how concerning concept, development, construction and manufacturing of test benches and
More informationTorque Transducers MEASURING ELECTRONIC
Screwdriving technology Automation Air motors Air tools MEASURING ELECTRONIC Torque Transducers In most situations, the essential element of screwdriving technology is torque. Controlling the torque generated
More informationSteering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min
Steering unit RE 11872/05.06 /10 Type LAGL Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min H7375 Table of contents Contents Page Features 1 Ordering code 2 Function, section 3 Device
More informationNorbro Series 40R Pneumatic Actuator Double Acting or Spring Return
Pneumatic Actuator Double Acting or Spring Return Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators
More informationB.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN
No. of Printed Pages : 7 BAS-01.0 B.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) CV CA CV C:) O Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN Time : 3 hours Maximum Marks : 70 Note : (1)
More informationMechanical Testing Equipment at MSSI
TITLE DESCRIPTION Tinius/Olsen Screw- Driven Straining Frame Equipped with ±25 kn and ±1 kn load cells for static testing at relatively low load levels (calibration: load cells: Jan. 2007, 100SC: Nov.
More information3-Component Measuring System
Force 3-omponent Measuring System for utting Force Measurement During Turning Modular system for measurement of cutting forces when turning outside and inside diameters on turret lathes. Machine adapters
More informationSense it! Connect it! Bus it! Solve it! EncoderS
Sense it! Connect it! Bus it! Solve it! EncoderS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
More informationThe Fundamentals of Spring Testing
The Fundamentals of Spring Testing starrett.com Starrett SMS Series A Better Solution for Testing and Measuring Compression and Extension Springs INTRODUCTION The design, manufacture and use of springs
More informationRadial piston pumps type R and RG
Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More information15 th International Conference on Experimental Mechanics
PAPER REF: 3762 LABORATORY TESTS OF COMPRESSIVE CREEP IN CONCRETE SAMPLES: DEVELOPMENT OF SOLUTIONS FOR PROBLEMS OF ACTUATION, MEASUREMENT, DATA ACQUISITION AND LOAD BALANCING João Palma (*), Paulo Morais,
More informationModel RC Armature-Slot- Insulation Folder
Model RC Armature-Slot- Insulation Folder 21 Model RC will handle insulation material up to 8 wide between its guides. Creasing rollers are adjustable sideways to make troughs up to 6 wide. A fixed ruler-guide
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More informationSubminiature Load Cell Model 8417
w Technical Product Information Subminiature Load Cell 1. Introduction... 2 2. Preparing for use... 2 2.1 Unpacking... 2 2.2 Using the instrument for the first time... 2 2.3 Grounding and potential connection...
More informationThickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
More informationSeries 1800. Pressure/Pipe Testing Systems. Continuous and Short-Term Hydrostatic Pressure Testing per ASTM D1598 and D1599
Series 1800 Pressure/Pipe Testing Systems Continuous and Short-Term Hydrostatic Pressure Testing per ASTM D1598 and D1599 Applied Test Systems, Inc. (ATS) produced its first custom hydraulic pressure tester
More informationFredriksons conveyor systems handle goods with a width from 20 mm up to 600 mm.
Conveyor Solutions Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from one
More informationProfile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationBringing good things ahead
Bringing good things ahead Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from
More informationSpecifications 860-10000KN
Specifications 860-00 HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 201608-IV NINGBO
More informationNAGEL ECO 180 FLEXIBLE HONING SYSTEM
NAGEL ECO 180 FLEXIBLE HONING SYSTEM NEW DEVELOPMENT For Small and Medium Production Runs In-process gauging, Roughing and finishing in a single spindle Tel: 734-426-1812 www.nagelusa.com MACHINE HIGHLIGHTS
More informationLINEAR ACTUATORS. Linear Actuators. Linear Actuators. Linear Actuators are Actuators that creates motion in a straight line, as contrasted
LINEAR ACTUATORS Linear Actuators Linear Actuators Linear Actuators are Actuators that creates motion in a straight line, as contrasted with circular motion of a conventional electric motor. Linear actuators
More informationIncubator with mechanical convection
BF series 400 Incubators and cooling incubators Incubator with mechanical convection The BINDER incubator of the BF series with mechanical convection is suitable for all gentle incubation applications,
More informationMaxi-Stamper. 200 to 1,000 Tons STAMPING OUT DOWNTIME
TM Maxi-Stamper 200 to 1,000 Tons STAMPING OUT DOWNTIME Standard Features Steel Fabricated Construction Drive Capacity Rated 1/2 Above Bottom of Stroke Self-Diagnostic Solid State Controller Moveable Operator
More information301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
More informationEncoders for Linear Motors in the Electronics Industry
Technical Information Encoders for Linear Motors in the Electronics Industry The semiconductor industry and automation technology increasingly require more precise and faster machines in order to satisfy
More informationPERFORMANCE TEST REPORT. Rendered to: FORMTECH ENTERPRISES, INC. SERIES/MODEL: Truline PRODUCT TYPE: PVC Seawall
PERFORMANCE TEST REPORT Rendered to: FORMTECH ENTERPRISES, INC. SERIES/MODEL: Truline PRODUCT TYPE: PVC Seawall Report No.: Test Dates: 04/17/12 Through: 04/18/12 Report Date: 06/13/12 130 Derry Court
More informationUltrasonic Reference Blocks
Ultrasonic Reference Blocks Custom and Standard Test Blocks for Nondestructive Testing Introduction 3 IIW Type 1 Calibration Block 4 Miniature Angle Beam (ROMPAS) Calibration Block 4 Distance Calibration
More informationLABORATORY DETERMINATION OF CALIFORNIA BEARING RATIO
LABORATORY DETERMINATION OF CALIFORNIA BEARING RATIO STANDARD IS: 2720 (Part 16) 1979. DEFINITION California bearing ratio is the ratio of force per unit area required to penetrate in to a soil mass with
More informationOEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250
MAKING MODERN LIVING POSSIBLE Data sheet OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic
More informationTEST REPORT. Rendered to: LMT-Mercer Group, Inc. For: PRODUCT: 4" x 4" and 5" x 5" PVC Porch Posts with Aluminum Reinforcing
TEST REPORT Rendered to: LMT-Mercer Group, Inc. For: PRODUCT: 4" x 4" and 5" x 5" PVC Porch Posts with Aluminum Reinforcing Report No.: Report Date: 01/28/14 Test Record Retention Date: 12/20/17 130 Derry
More informationpeel adhesion 2 breaking load 4 rolling ball 6 shear adhesion 7 carton test 9 summary test methods 11
CONTENT peel adhesion 2 breaking load 4 rolling ball 6 shear adhesion 7 carton test 9 summary test methods 11 PEEL ADHESION Testing the peel adhesion on stainless steel 1. Definition Peel adhesion - The
More informationPPM HYDRAULIC PRESSBRAKES
PPM HYDRAULIC PRESSBRAKES PPM Hydraulic pressbrakes Our long experience in producing hydraulic pressbrakes, as well conventional as CNC controlled, enables us to bring to our customers a solid engineered,
More informationWhirling Machine. New Dimension of Whirling Technology. Thread Whirling Machines. Big Workpiece Diameter. High Pitch Thread
LEISTRITZ PRODUKTIONSTECHNIK GMBH Thread Whirling Machines Whirling Machine New Dimension of Whirling Technology Big Workpiece Diameter High Pitch Thread Customer Satisfaction remains the Highest Priority
More informationLDDM Linear Direct Drive Motors. ULIM Series
DDM inear Direct Drive Motors UIM Series 1 The Perfect Drive for Every Application. INA - Drives & Mechatronics GmbH & Co. ohg, a company of the Schaeffler Group, specializes in linear and rotary direct
More informationPaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
More informationExample. Fluid Power. Circuits
Example Fluid Power Circuits To Enhance Symbol Reading Skills To Work On Circuit Reading Skills With Answers HI LO Pump Circuit 18 A1 B1 17 16 15 13 Set 14 2,000 PSI PG2 Set 500 PSI 12 11 7 8 10 PG1 9
More informationServo/Hydraulic Press Brake. HG Series HG 5020, HG 8025, HG 1303, HG 1703 HG 1704, HG 2203, HG 2204
Servo/Hydraulic Press Brake HG Series HG 5020, HG 8025, HG 1303, HG 1703 HG 1704, HG 2203, HG 2204 The HG Series Press Brake An ultra-high precision, high-speed compact bending solution featuring an advanced
More informationPC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3
PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing
More informationLINEAR MOTION CONTROL
LINEAR MOTION CONTROL Technical Data Sheet Static Locks RLSS Series Nexen s new generation of linear holding/locking devices take rod locking technology to the next level. With superior performance, these
More informationIn today s fast moving world, there is a. low cost and on time, to satisfy the needs. Simple to Use, Easy to Maintain and
Range Overview 1.3-2.0t Three Wheel Electric Forklift Trucks www.utilev.com Utility you can trust TM In today s fast moving world, there is a constant drive to have goods transported from one location
More informationHeating oven with mechanical convection
FD series 53 Drying ovens / Heating ovens Heating oven with mechanical convection A BINDER FD series heating oven is always used when fast drying and sterilization is required. Thanks to its fully homogeneous
More informationSECTION 10680 MediaStation Model 125 Electric Lateral Files (ELF)
SECTION 10680 MediaStation Model 125 Electric Lateral Files (ELF) PART 1-GENERAL 1.01 RELATED WORK SPECIFIED IN OTHER SECTIONS A. Electrical connections see electrical specifications. 1.02 SUBMITTALS A.
More informationSelecting and Sizing Ball Screw Drives
Selecting and Sizing Ball Screw Drives Jeff G. Johnson, Product Engineer Thomson Industries, Inc. Wood Dale, IL 540-633-3549 www.thomsonlinear.com Thomson@thomsonlinear.com Fig 1: Ball screw drive is a
More informationINDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK
INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single
More informationIndex 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9
Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.
More informationImpact Testing Systems
The more intelligent solution... Impact Testing Systems The more intelligent solution... Tronjestraße 8, 44219 Dortmund Tel.: +49 231 912980 0 Fax.: +49 231 179855 www.coesfeld.com mail@coesfeld.com Introduction
More informationNow available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers
Now available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers Universal container K 470 the original since 1950 Often copied but never equalled or bettered
More informationŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the
More informationQuick Reference Catalog
Gearboxes Turrets Y-Axis Rotary Tools Tool Discs B-Axis Quick Reference Catalog WWW.BARUFFALDI.IT TB Servo Turret SERVO MOTOR TURRETS TB-type turrets rotate thanks to a BRUSHLESS SERVO MOTOR controlled
More informationEquipment Information
3002A Equipment Information INDEX: DESCRIPTION AND KEY FEATURES LAYOUT NOMINAL TECHNICAL DATA CONFIGURATION Sealed Air GmbH Customer Systems Center D4 Park 4 CH-6039 Root-Längenbold Telephone: +41 (0)
More informationHydraulic Control Solutions
Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district
More informationKNC Model 3666 Automatic Pressure Calibration System
KNC Model 3666 Automatic Pressure Calibration System Product Description The Model 3666 Automatic Pressure Calibration (APC) System by King Nutronics Corporation is a portable secondary standards laboratory
More informationEngineering & Testing Services. Hydraulic Fitting Design and Hydro-Mechanical Testing
Engineering & Testing Services Hydraulic Fitting Design and Hydro-Mechanical Testing Aerofit, Inc. APT Laboratory 1425 South Acacia Avenue Fullerton, CA 92831 Main: 714-521-5060 Fax: 714-535-9862 Our Company
More information307E. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo. Weights
307E Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights Operating Weight 6800
More informationNikon s DigiMicro Position Encoders Nanometer Resolution with Sub-Micron Accuracy
Nikon s DigiMicro Position Encoders Nanometer Resolution with Sub-Micron Accuracy Available in North America through NanoWave, Inc. The DigiMicro Family The DigiMicro product line from Nikon is a family
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More informationForce measurement. Forces VECTORIAL ISSUES ACTION ET RÉACTION ISOSTATISM
Force measurement Forces VECTORIAL ISSUES In classical mechanics, a force is defined as "an action capable of modifying the quantity of movement of a material point". Therefore, a force has the attributes
More informationTOOL CLAMPING SYSTEMS
TOOL CLAMPING SYSTEMS 2015/2016 We work for customers who have a weakness for our strengths. Companies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationEDEXCEL NATIONAL CERTIFICATE/DIPLOMA MECHANICAL PRINCIPLES AND APPLICATIONS NQF LEVEL 3 OUTCOME 1 - LOADING SYSTEMS TUTORIAL 3 LOADED COMPONENTS
EDEXCEL NATIONAL CERTIICATE/DIPLOMA MECHANICAL PRINCIPLES AND APPLICATIONS NQ LEVEL 3 OUTCOME 1 - LOADING SYSTEMS TUTORIAL 3 LOADED COMPONENTS 1. Be able to determine the effects of loading in static engineering
More informationTEPZZ 8 8 A_T EP 2 811 282 A1 (19) (11) EP 2 811 282 A1 (12) EUROPEAN PATENT APPLICATION. (51) Int Cl.: G01N 3/04 (2006.01) G01N 3/08 (2006.
(19) TEPZZ 8 8 A_T (11) EP 2 811 282 A1 (12) EUROPEAN PATENT APPLICATION (43) Date of publication:.12.14 Bulletin 14/0 (1) Int Cl.: G01N 3/04 (06.01) G01N 3/08 (06.01) (21) Application number: 14170412.2
More informationSolid Mechanics. Stress. What you ll learn: Motivation
Solid Mechanics Stress What you ll learn: What is stress? Why stress is important? What are normal and shear stresses? What is strain? Hooke s law (relationship between stress and strain) Stress strain
More informationHighly flexible couplings
Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations
More information912. The engine for construction equipment.
912. The engine for construction equipment....... 24-82 kw at 1500-2500 min -1 These are the characteristics of the 912: Air-cooled 3-, 4-, 5-, 6-cylinder naturally aspirated in-line-engines. Direct injection.
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER: SUPPLIER: CONTACT: DATE: E-mail: VALIDITY: 1 month Dear Sir, In the attached file you will find the proposal and specification(s) for the ASK
More informationTesting Systems. The specimen under control - Specimen grips and test tools. Intelligent Testing FP 745 2.0910
Testing Systems The specimen under control - Specimen grips and test tools FP 745 2.0910 Intelligent Testing Table of contents 1 Zwick Roell passionate customer orientation... 2 2 Selection process for
More informationHERZ-Thermal Actuators
HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01
More informationStock List: >>Offset- Printing Machines
>>Offset- Printing Machines Heidelberg GTO-52+ - Single- colour sheet offset printing machine, - Printing format 36 cm x 52 cm, - Manufacturing year 1985, - Plus- Version, - 14 Mio. prints, - Conventional
More informationMTS 810 & 858 Material Testing Systems. Versatile, multipurpose servohydraulic testing systems for static and dynamic tests
MTS 810 & 858 Material Testing Systems l Versatile, multipurpose servohydraulic testing systems for static and dynamic tests MTS 810 & 858 Test Systems Meeting the Full Spectrum of Testing Needs Superior
More informationTruBend: More. bending. freedom. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology
TruBend: More bending freedom Machine Tools / Power Tools Laser Technology / Electronics Medical Technology Precise bending. More flexible than ever before. The TRUMPF Group is one of the world s leading
More informationMachining Center Equipped with Unparalleled Rigidity and Agility NHX6300
Press Release Mori Seiki Co., Ltd. Head Office: 2-35-16 Meieki, Nakamura-ku, Nagoya City 450-0002, Japan TEL: +81(0)52-587-1830 FAX: +81(0)52-587-1833 January 24, 2013 Machining Center Equipped with Unparalleled
More informationMachine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled
Machine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Bolt shut-off with integrated 2-way actuator pneumatically
More information