Automated Pensky Martens Closed Cup Flash Point Analyzer HFP 339

Transcription

1 Standard Quotation No. Automated Pensky Martens Closed Cup Flash Point Analyzer HFP 339 Fuels have different components from light to heavy hydrocarbons. The flashpoint method gives information about the light components by their tendency to flash. It further gives important information on safety and shipping regulations. The HFP 339 is a fully automated instrument which perfectly mimics the manual process as described in the following methods: ASTM D 93 A&B, ISO 2719 A&B, EN ISO 2719 A&B, DIN EN ISO 2719 A&B, NF EN ISO 2719 A&B, IP 34 A&B, JIS K 2265, DIN The Instrument has a built in microprocessor system which controls all functions of the unit. Operation of the instrument is done via easy to read VF-Display and a solvent resistant alpha numeric keypad. This easy to use man machine interface lets the operator quickly initiate standard flash point testing, change test parameters to run customized protocols, run the systems diagnostics, and recall or print test results. Main Features Flash point determinations may be run using standard test method or customized test protocols 6 Standard programs and 3 user-defined test programs. Tests for samples with unknown flash points. Automatically corrects results to barometric pressure. Memorizes the last 9 Flash Point results Built-in safety functions Built in fire detection system with audible alarm and external alarm relay contact. Thermal flash point detection eliminates any interference from water or silicone containing samples. Electric ignition (standard) and Gas ignition (option) HFP339 Technical Offer Page 1 of 15

2 Technical details Standards ASTM D 93 Methods A&B, ISO 2719 A&B, EN ISO 2719 A&B, DIN EN ISO 2719 A&B, NF EN ISO 2719 A&B, IP 34 A&B, JIS K 2265, DIN Configuration Stand alone automated Pensky Martens flashpoint analyzer HFP 339 Sample Temperature Measurement Cabinet/Chassis Sample Heating System Heating Rate Control Heating Rate Sample Stirrer Igniter Ignition Interval Barometric Pressure Flash Detection System Glass Pt 100 probe, Metal Pt 100 available as a plug in accessory. Temperature range: C, resolution 0.1 C F, resolution 0.1 F Each measurement program can be individually programmed in C or F. The system perfectly mimics ASTM 9C/9F, 88C/88F and 10C/10F-standardthermometers. Probe can be calibrated on the display Automatic calibrating of the electronic circuit with integrated, high precision calibration resistors eliminates temperature and long term drift of the temperature measuring unit. All steel, baked epoxy resin coated: electromagnetic isolation, solvent resistant. Width only 25 cm (9.85 ) 950 W, conforms to CE safety specification. Air cooled at the end of the test. Automatic proven algorithm controls temperature of heater block and sample. Per appropriate method or user-defined programmable from 0.5 to 14 C/min for individual measurement programs. Stepper motor operated stirring. Per appropriate method or user-defined programmable from 20 to 255 revolutions/min for individual measurement programs. Reliable electric igniter comes as a standard. The unit monitors the correct function of the electric igniter. Gas ignition is optional available. The Gas flame is automatically ignited by an auxiliary electric igniter. Per appropriate method or user-defined programmable in 0.5 to 5 C steps Built in barometric pressure sensor makes automatic pressure correction of the flash point temperature data. Indicated as mbar, hpa, kpa, mmhg or Torr. Thermal detection system to eliminate interference from water or silicone containing samples. Display A 2 line 20 character VF-Display gives information about the status of the HFP 339. The HFP 339 lets you quickly initiate standard flashpoint point tests. You are also able to easily calibrate the instrument, generate methods and review past test results. Keyboard Operation of the instrument is done via a 25 button solvent resistant foil keypad. Result Documentation Printer Test results are displayed on the VF-Display and can also be output automatically or on demand to an optional printer or computer system (LIM). A typical report includes the Sample ID, Date and Time, Measurement Program, expected Flash Point, measured and corrected Flash Point and barometric pressure. Any printer with CENTRONICS interface and ASCII character set may be HFP339 Technical Offer Page 2 of 15

3 Printer and LIMS crosslinking of several units Communications Results memory Test Programs used. To save space a small footprint needle ticket printer is recommended (see accessories). In order to connect several units to one PC with a Laboratory Information System (LIMS) or to a printer, the units can be linked together as a Herzog Token Ring network (HTR). It is possible to link up to 16 units. Connect with cable ( ) to the socket HTR at the back of the instrument. Serial transmission of all data via RS232 and HTR (Herzog Token Ring) protocol. The instrument stores the last 9 test results with Sample number and flash point temperature. 6 standard programs and 3 user defined programs Safety Features Password Protection Fire Extinguisher Fire Safety A built-in fire sensor located next to the lid cover alerts instantly to flames outside the flash cup. A potential-free alarm relay contact is also available to link the HFP to a fire suppression system or alarm bell. Safety pre test By doing safety pre dip ins the unit can detect high volatile contamination in normally high flash point samples and avoid a risk of fire Alarm Functions Automatic detection of method or safety violations. User selects test termination or alarm message Calibration and Diagnostics Password protection is available to prevent inadvertent changing of programmed test parameters and calibration. The instrument incorporates a comprehensive diagnostic program which allows you to check every key component and assembly. In addition, it features a selfcalibrating sample temperature measuring system that automatically compensates for drift. Any probe deviation can be corrected on screen calibration of resistance thermometer. Operating Requirements Electrical 115V or 230VAC ±10% switchable; 50-60Hz ; 1100 W Ambient Conditions Temperature: max. 10 to 35 C; recomm. 15 to 25 C Humidity: 80% rel. at 35 C Storage temperature: -15 to +55 C Dimensions 25 cm (9.85 ) wide, 56 cm (22 ) deep, 51 cm (20.1 ) tall Weight 25kg, (55 lb) HFP339 Technical Offer Page 3 of 15

4 Ordering information: Order No. Description Picture Price HFP 339 Pensky Martens 230V, el. igniter HERZOG - automatic flash point tester acc. to Pensky Martens. Compact single unit with VF- Display and alphanumeric keypad: Electric ignition 230 V, Hz. 1 x Power cord with Continental European IEC/DIN plug. Accessories included: 1 x Instruction manual 1 x Test cup Pensky Martens 1 x Pt 100 for sample temperatures up to +400 C 1 x Flashpoint sensor with plug 1 x Test cover, PM, for electric igniter and thermal flash detection device. 2 x Electric igniters 1 x Thermo fuses for fire sensor 1 x Cover-handle PM 1 x Gauge as igniter simulator 1 x Igniter dip in level adjustment tool 1 x Gauge for adjustment of dip in level 1 x Cover handle for HFP x Drip cup, Pensky Martens 1 x Coupling for stirrer, HFP x Set of hexagonal wrenches: 1.5; 2; 2.5; 3; 4; 5mm HFP 339 Pensky Martens 115V, el. igniter HERZOG - automatic flash point tester acc. to Pensky Martens. Compact single unit with VF- Display and alphanumeric keypad: Electric ignition 115 V, Hz 1 x Power cord with US NEMA 5-15 plug. Accessories included as for HFP339 Technical Offer Page 4 of 15

5 Order No. Description Picture Price HFP 339 Pensky Martens 230V, gas igniter HERZOG - automatic flash point tester acc. to Pensky Martens. Compact single unit with VF- Display and alphanumeric keypad: Gas ignition 230 V, Hz 1 x Power cord with Continental European IEC/DIN plug Accessories included: 1 x Instruction manual 1 x Test cup Pensky Martens 1 x Pt 100 for sample temperatures up to +400 C 1 x Flashpoint sensor with plug 1 x Test cover, PM, for gas igniter 2 x Electric igniters with closed filament 1 x Straight gas connection 1 x Thermo fuses for fire sensor 1 x Cover handle for HFP x Gauge as igniter simulator 1 x Igniter dip in level adjustment tool 1 x Gauge for adjustment of dip in level 1 x Drip cup, Pensky Martens 1 x Coupling for stirrer, HFP x Set of hexagonal wrenches: 1.5; 2; 2.5; 3; 4; 5mm HFP 339 Pensky Martens 115V, gas igniter HERZOG - automatic flash point tester acc. to Pensky Martens. Compact single unit with VF- Display and alphanumeric keypad: Gas ignition 115 V, 50-60Hz 1 x Power cord with US NEMA 5-15 plug Accessories included as HFP339 Technical Offer Page 5 of 15

6 Accessories: Order No. Description Picture Price Gas supply accessory set for HFP 339 Ready to connect an external low pressure gas source and supply the gas ignition test cover with gas. In addition need following Parts! Test cover, PM, for gas igniter Electric igniters with closed filament MV-connection cable Stainless steel sample thermometer probe up to +400 C HFP Matrix dot printer, 40 columns, using endless paper roll of 76mm width, Centronics interface, Dimensions: 156 mm (W) x 248 mm (D) x 132 mm (H), VAC, 24W, Power cord with Continental European IEC/DIN plug. Centronics Printer cable not included Ink ribbon for Matrix dot printer No Picture Paper rolls (10 pcs.) for Matrix dot printer printer mm x 60 x 12mm Ink jet printer with English and German manual, ASCII compatible, for VAC, Power cord with Continental European IEC/DIN plug. Centronics Printer cable not included Printer connection cable (Centronics) HFP339 Technical Offer Page 6 of 15

7 Order No. Description Picture Price Pressure calibration instrument. U-tube system that creates a gauge pressure of 0 40 mbar Special low volume (20 ml) sample test cup for Pensky Martens, HFP Special cover for low sample volume (20 ml) for Pensky Martens, HFP 339 electric ignition Cooling test cup Pensky Martens for flash points below +40 C (cooled with dry-ice) Cooling test cup Pensky Martens, for flash points below +40 C ( with built on cooling coil for cooling with external chiller) HFP339 Technical Offer Page 7 of 15

8 Order No. Description Picture Price Pt100 probe simulator box 0 to +400 C with 6 fixed temperatures, accuracy better 0,2%, including 4-wire connecting cable with connector used for Herzog Pt100 probes Certified Reference Material, ASTM D93 Flash point Pensky Martens appr. +65 C, with certificate, 255 ml diesel fuel Certified Reference Material (CRM), Flash point Pensky Martens appr. +95,3 C, approx. 255 ml Certified Reference Material, ASTM D93 Flash point Pensky Martens appr C, with certificate, 255 ml base oil Plug, 6-pol. mating halve for fire alarm outlet HFP Cable for alarm outlet Angled gas connection without threat for HFP Cup holder Additional Holder for storage the cup on the left side of the unit. HFP339 Technical Offer Page 8 of 15

9 Recommended spare parts for appr. 2 years of operation Order No. Description Qty Picture Price Pensky Martens Test cup, brass Coupling for stirrer HFP Stepper motor f. stirring HFP Stepper motor f. dip in HFP Temperature sensor for heating block HFP Bottom heater 450 W/ HFP Wall heater 500W/MP HFP Electric igniter with open filament for HFP 36x family and HFP HFP339 Technical Offer Page 9 of 15

10 Order No. Description Qty Picture Price Fuse 10 A MT Fuse 2 A MT Fuse 6.3 A MT Fuse 4 A MT Fire sensor Sample temperature probe up to 400 C HFP Flash sensor for water containing samples, with plug Solid state relay 4A 230V 1 HFP339 Technical Offer Page 10 of 15

11 Other spare parts: Order No. Description Picture Price Cover-handle PM HFP Test cover PM for HFP 339 with provisions for thermal flash detection and for electric ignition Test cover PM for HFP 339 with provisions for thermal flash detection and for gas ignition Gauge as igniter simulator HFP339 Technical Offer Page 11 of 15

12 Order No. Description Picture Price Igniter dip in level adjustment tool Drip cup, Pensky Martens Gauge for adjustment of dip in level Blower Bottom-Heater Push-pull rod to open the cover shutter Cardanic suspension for Driving device with suspension for HFP339 Technical Offer Page 12 of 15

13 Order No. Description Picture Price Electric igniter with closed filament to re-ignite the gas ignition Foil keypad Temperature measurement P.C.B., with software Motor control PCB for dip in system, without EPROM EPROM with latest HFP339 software for Motor control PCB for stirrer, without EPROM EPROM wit latest HFP339 software for Display Keyboard Adapter HFP339 Technical Offer Page 13 of 15

14 Order No. Description Picture Price Adapter for Measuring board Interface board Power supply board CPU board Pressure sensor and flash detection P.C.B Main switch Varistor metallic oxide for mains protection Transformer for electric ignition HFP339 Technical Offer Page 14 of 15

15 Order No. Description Picture Price Transformer 230/115V-24V/8V/HFP339 HFP339 Technical Offer Page 15 of 15