LTC 8600 Series Allegiant Matrix/Control Systems - Modular

Transcription

1 Video LTC 8 Series Allegiant Matrix/Control Systems - Modlar LTC 8 Series Allegiant Matrix/Control Systems - Modlar 8 Camera by monitor switching Modlar constrction Powerfl alarm handling capabilities SalvoSwitching and SatelliteSwitch capability PC-based software package available The LTC 8 Series Allegiant video switcher/control systems combine both switching and compter technology to provide powerfl performance and niqe system featres for the secrity ser. Offering fll matrix switching capability, these systems can be programmed to display the video from any camera on any monitor, either manally or via independent atomatic switching seqences. Fnctions General Constrction The LTC 8 Series provide versatile modlar constrction accommodating p to 8 camera inpts, monitor otpts, keyboards, 5 alarm points, a compter interface port, and a logging printer port. Seqencing Capabilities These systems can be programmed with p to seqences which can be rn independently of each other in either a forward or reverse direction. Any of the seqences can tilize the SalvoSwitching capability where any nmber of system monitors may be selected to switch as a grop. Using the optional LTC 859/ master control software package, seqences can be made to activate and deactivate atomatically based pon the time of day and the day of week. Camera Control The LTC 8 Series spport variable speed operation and fll programming access for AtoDome and AtoDome Easy II Series cameras. In addition, on-site receiver/drivers are available to provide operator control of pan, tilt, zoom, pre-positions, axiliaries, ato-pan, and random scan fnctions when sed with conventional pan/tilt devices. An integral local test fnction is also a standard featre. The LTC 8 Series inclde an impressive ser-based priority system and a series of programmable lockot tables to limit operator access of remotely controlled devices. Operators can restrict control from lower priority operators either manally or atomatically. When enabled to operate atomatically, a bilt-in timeot period is ser programmable. Bilinx Capability When combined with an LTC 8 Allegiant Bilinx Data Interface nit, these switcher/controllers spport operations sing Bilinx commnication. With Bilinx, PTZ control is accomplished sing a bidirectional

2 LTC 8 Series Allegiant Matrix/Control Systems - Modlar commnication protocol embedded in the video signal of Bosch Dinion, AtoDome, and AtoDome Easy II CCTV cameras. In addition, Bilinx ses the standard video cable to transmit alarm and stats messages from the cameras, providing sperior performance withot the need for separate data transmission cables. Alarm Capabilities With the addition of the LTC 854/ Series alarm interface accessory nits, an external contact closre or logic level can be sed to atomatically activate any camera to be displayed. Any monitor or grop of monitors can be set to display cameras nder alarm conditions. The base system contains three bilt in alarm response modes: basic, ato-bild, and seqence and display. In addition to these three modes, the PC based software packages now incldes the ability to combine any or all of the three standard modes within the same system. Alarm video may be selected to reset either manally or atomatically. In addition, a -character alarm title can be selected to appear instead of the camera title dring alarm conditions. Programming/Software Capabilities The LTC 8 Series incldes a black otlined 48- character on-screen display for time-date, camera nmber, camera ID (-characters), an icon to identify controllable cameras, and monitor (-characters) or stats information. A ser selectable option provides the ability to display a third line of on-screen text. This third line can be configred to display p to 4 additional camera title characters (4 characters total) or a -character monitor title. The on-screen display is also ser selectable to operate in "-digit Camera ID" mode. When enabled, - digit "site nmbers" are displayed in addition to the 4- digit camera nmber. The -digit site nmber featre is especially sefl when grops of cameras are located in separate bildings, floors, or other common areas. Over characters are available when programming camera ID and monitor titles. Utilizing a standard Windows -based PC and the optional LTC 859/ Master Control Software package, enhanced programming and switching featres can be obtained. A ser-friendly spreadsheet format provides the ability to enter camera titles, operator names, 4 timed events, change system parameters, program camera seqences, install lockots, and access the advanced alarm handling screens with speed and efficiency. The programmed information may then be transferred into the Allegiant system, stored on disk, or printed ot directly from a printer connected to the PC. The LTC 8 Series contain a logging printer otpt port. This RS- serial interface can be connected to the serial port of a PC to provide a permanent record of system stats showing time and date of changes sch as: incoming alarms, acknowledgment of alarms, loading of seqences, ser log-on to keyboard, transfer of system tables and seqences, video loss messages, and a power p reset message. In addition, lists of the system's configration tables and seqences can be sent to the printer port. The LTC 8 system provides powerfl macro capabilities. The macros can be activated sing Allegiant Series system keyboards, system time event fnctions, and alarm activations. Expansion Capabilities The LTC 8 Series can serve as the Master Switcher in a SatelliteSwitch configration. This innovative SatelliteSwitch featre enables a single LTC 8 Series system to commnicate with remotely located "Satellite" systems. Any Allegiant system model can serve as a master or remote Satellite switcher. This powerfl featre permits the design of a distribted matrix video switching system with control at one central location and individal control at the local sites. The main control site can view/control local cameras pls cameras located at any of the remotely distribted Satellite sites. The Satellite sites can view/ control only cameras associated with their own site. When sed in this type of configration, the main LTC 8 Series system can access p to 4 cameras located anywhere in the system. By combining mltiple Satellite systems of this type, matrix sizes of 4 cameras by monitors can be designed in an extremely reliable, "Distribted Processing" configration. Certifications and approvals Electromagneti c Compatibility (EMC) ct Safety Region Complies with FCC Part 5, ICES-, and CE reglations. This prodct also complies with EN 5-4 railway application standards. Refer to website for link to applicable docments. Complies with CE reglations, UL, CSA, EN, and IEC Standards Certification Erope CE LTC 8, LTC 88, LTC 88)

3 LTC 8 Series Allegiant Matrix/Control Systems - Modlar Installation/configration notes LTC 4 5 LTC 8/ 884/ 5 9 LTC 8/ LTC 8/ 8 LTC Allegiant Satellite Switching System LTC 8 Series Configration Diagram (8 Cameras by itors) Video Coax Up to 4 Maximm Video Inpts Additional System Cameras 4 Inpt Cards (max. 8) 5 Otpt Cards (max. 4) CPU-Modle Power Spply Modle 8 m ( ft) Interconnect Cable Spplied with Keyboard 9 8 itor Otpt Capability Fll Matrix itor Otpts Maximm, Fll Fnction Keyboard Maximm Main CPU Bay itor Otpts 4 Alarm Interface Unit 5 Pan/Tilt/Zoom and Satellite Control Data 4 Allegiant Main CPU Bay 5 Inpts Used for Both Local and Trnk Lines 8 Local Camera Video Inpts 9 Alarm Inpts May Activate Either Local or Satellite Video on Main Control Center's itor 8 Signal Distribtion Unit 9 To Any Local PTZ Camera Sites Up to.5 km (5 ft) Using mm (8 AWG) Shielded Twisted Pair (Belden 8 or Eqivalent) Allegiant Keyboard controls any local or remote camera on any local monitor (Video and PTZ) Mltiple Video Trnk Lines From Each Remote Satellite Location 4 5 Pan/Tilt/Zoom and Satellite Control Data itor Otpts Used As Video Trnk Lines to Main Control Site Video Trnk Lines From Other Satellite Locations Any Model Allegiant Main Bay Local itors Satellite Data Line Console Port Inpt Data Converter Units To Any Local PTZ Camera Sites Code Merger Unit Alarm Interface Unit Local PTZ Control Data Line

4 4 LTC 8 Series Allegiant Matrix/Control Systems - Modlar One Line to Each Remote Satellite System Location Technical specifications LTC 8 Series System Specifications Capacities Allegiant Keyboard controls any local or remote camera on any local monitor (Video and PTZ) Alarm Inpts Activate Only Local Video on Local itors Video Inpts Standard: 8 Satellite configration: 4 Video Otpts Keyboards Alarm Inpts 5 Receiver/Drivers Standard: 8 Satellite configration: 4 Electrical Video Bandwidth (- db) Differential Gain Differential Phase K Factor.5% Signal-to-Noise Ratio Crosstalk (Inpt to Inpt Isolation) Feedthrogh (Inpt to Otpt Isolation) Gain Tilt Transient Protection (VIM Cards) Environmental Temperatre Altitde MHz typical % maximm maximm db minimm 5 db typical 45 db typical Unity ± % (into 5 Ohm termination) % typical 5 W Peak Plse Power (tp = 8/ µs) Operating 4 C to 5 C (4 F to F) Storage 4 C to C ( 4 F to 4 F) Hmidity Vibration Shock 45 m (5, ft) % to 95% relative, non-condensing g swept sine wave, 5 Hz to Hz 5 g, ms, / sine wave ct Reglatory Compliance LTC 8 Series Eqipment Bay Incldes eqipment rack, LTC 8/ microprocessor modle, and LTC 885 Series power spply. Power Model No. Rated Voltage Voltage Range Nominal Power LTC 8/ VAC, 5/ Hz LTC 8/5 4 VAC, 5/ Hz. Power at rated voltage flly loaded. Connectors to 4 W 98 to 4 W Video Inpts to 9 One () sync inpt, and monitor otpts, BNC Video Connections 9 to 8 Looping Video Connections -8 External Accessory Interfaces Connectors CONSOLE ALARM PRINTER SDA COM PORT COM PORT KEYBOARDS Eqipment Rack Size (W x D x H) Two (), 4-pin ribbon connectors sed in conjnction with the LTC 888/ video interconnect panel Eight (8), 4-pin ribbon connectors sed in conjnction with the LTC 888/ video interconnect panel 9-pin D-type RS- port for external PC or control interface (Defalt = 9. k bad) 9-pin D-type RS- port for Allegiant alarm accessory nit (Defalt = 9. k bad) 9-pin D-type RS- port for system logging printer (Defalt = 9. k bad) 9-pin D-type, TTL level, hi-speed control data otpt (Bi-Phase) for interface to Allegiant series signal distribtion nits (Data clock rate =.5 khz) 9-pin D-type RS-485 port for external Allegiant accessory se 9-pin D-type RS-485 port for external Allegiant accessory se Eight (8), -pin RS-485 ports for Allegiant keyboard se EIA 48 cm (9 in.) rack, 48 x 4 x mm (9 x.5 x.5 in.). kg (4.5 lb)

5 5 LTC 8 Series Allegiant Matrix/Control Systems - Modlar Constrction/Finish Finish Top and bottom: steel front and sides back: alminm Charcoal Microprocessor Modle (LTC 8/) Size (D x H) Power Spply x 5 mm (.8 x 9.8 in.).5 kg (. lb) (LTC 885/ VAC, LTC 885/5-4 VAC) Size (W x D x H) Indicators x x 4 mm (. x 4. x 9. in.) 5. kg (.5 lb) One power On/Off, ten fse alert, and one external sync LED LTC 8/ Camera Inpt Modle Use p to eight (8) per eqipment bay. Camera Inpts Size (D x H) x 5 mm (.8 x 9.8 in.).4 kg (.9 lb) LTC 884/ itor Otpt Modle Use p to (4) for per eqipment bay. itor Otpts 4 Size (D x H) x 5 mm (.8 x 9.8 in.).4 kg (.9 lb) LTC 888/ Video Interconnect Panel The LTC 888/ assembly contains an interconnect panel is sed to convert BNC connectors into two -channel ribbon cable connectors. The two -condctor ribbon cables (LTC 889/), designed especially for se with video signals, are sed to interconnect the video between the panel and the LTC 8 Series system. One LTC 888/ assembly is inclded at time of shipment and is reqired for system video inpts 9 to 8. In addition to being sed for video inpts 9 to 8, the LTC 888/ assembly can also be ordered as an option to provide looping capability. One LTC 888/ (incldes panel and two, ribbon cables) is reqired for each grop of cameras. Finish Size (W x D x H) Charcoal EIA 48 cm (9 in.) rack, 48 x 4 x 44 mm (9 x.5 x.5 in.) Panel.54 kg (. lb) Ribbon Cables (). kg (. lb) Allegiant Accessories The LTC 8 Series accessory prodcts provide many optional featres to the base Allegiant switching systems. Accessory prodcts inclde keyboards, keyboard extension kits, receiver/driver nits, switcher/followers, code merger nits, Allegiant Bilinx Data Interface nit, video ribbon cables, and keyboard expansion nits. All accessory prodcts are designed to be installer-friendly and compatible throghot the Allegiant series systems. See the Allegiant Accessories datasheet. Ordering information LTC 8/5 Allegiant Matrix Switcher p to 8 camera inpts, monitor otpts, incl. single bay, CPU and power spply, VAC, 5 Hz Order nmber LTC 8/5 LTC 8/ Allegiant Matrix Switcher p to 8 camera inpts, monitor otpts, incl. single bay, CPU and power spply, 5 VAC, Hz Order nmber LTC 8/ LTC 8/ Camera Inpt Modle for LTC 8, video inpts per card Order nmber LTC 8/ LTC 884/ Video Otpt Modle for LTC 8 and LTC 88, 4 video otpts per card Order nmber LTC 884/ Accessories LTC 885/5 Spare Power Spply for LTC 8/5 bay, -4 VAC, 5 Hz Order nmber LTC 885/5 LTC 885/ Spare Power Spply for LTC 8/ bay, VAC, Hz Order nmber LTC 885/ LTC 8/ Eqipment Rack (inclded) Order nmber LTC 8/ LTC 8/ Spare CPU Modle for LTC 8 bay Order nmber LTC 8/ LTC 8/ Spare CPU Modle CPU modle for the LTC 8 Series Order nmber LTC 8/ Software Options SFT-VASA Hybrid IP - Analog/Matrix Video over IP Integration Software Order nmber SFT-VASA LTC 885/ GUI Allegiant Single User Software Package Order nmber LTC 885/ LTC 859/ Allegiant Master Control Software Order nmber LTC 859/

6 LTC 8 Series Allegiant Matrix/Control Systems - Modlar SFT INTSRV Integration Server Software Allegiant integration software package Order nmber SFT-INTSRV Represented by: Americas: Erope, Middle East, Africa: Asia-Pacific: China: America Latina: Bosch Secrity Systems, Inc. Bosch Secrity Systems B.V. Robert Bosch (SEA) Pte Ltd, Secrity Bosch (Shanghai) Secrity Systems Ltd. Robert Bosch Ltda Secrity Systems Division Perinton Parkway Fairport, New York, 445, USA Phone: Fax: secrity.sales@s.bosch.com P.O. Box 8 5 BA Eindhoven, The Netherlands Phone: Fax: emea.secritysystems@bosch.com Systems Bishan Street Singapore 594 Phone: Fax: apr.secritysystems@bosch.com Bilding, No. Fqan Road North IBP Changning District, Shanghai 5 China Phone +8 8 Fax: Via Anhangera, Km 98 CEP 5-9 Campinas, Sao Palo, Brazil Phone: Fax: latam.boschsecrity@bosch.com Bosch Secrity Systems Data sbject to change withot notice 55 en, V, 4. Oct