HDMI Over Single Coax Transmitter Part # User Manual

Transcription

1 HDMI Over Single Coax Transmitter Part # User Manual

2 CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Unit Panel Layout 5 Sender Unit Panel Descriptions 6 Connecting and Operating the HDMI Over Coax Extender 7 Mounting Plate Installation 8 Specifications

3 INTRODUCTION The TX HDMI Over Single Coax Extender-Transmitter The HDMI Over Single Coax Extender sends HDMI signals Over just one 75Ohm Coaxial cable -- up to 400 feet away. The HDMI Over Single Coax Extender supports HDMI 1.2 and the newer HDMI 1.3 with features such as Deep Color and 1080p. DVI-D Computer video can also be transmitted with a DVI-to-HDMI cable By using standard and widely available 75Ohm RG-6U cables, the HDMI Over Single Coax Extender makes HDMI signal extensions easier than with heavy and expensive copper cables and more robust than with optical fiber. How it connects The HDMI Over Single Coax Extender system consists of a Transmitter and a Receiver. The HDMI source (set-top box, DVD player, or gaming console) connects to the sender box with the supplied 6-foot HDMI cable. The receiver box connects to the HDTV display in the same way -- up to 400 feet away. One 75Ohm RG-6U Coax cables link the sender and

4 receiver. Power is applied to the sender and receiver with the included 12V DC power supplies. HDMI picture emerges on the HDTV display. Note:The HDMI Over Single Coax Extender is HDCP compliant. OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE EXTENDER FOR HDMI OVER SINGLE COAX The distance that a signal will be carry over the Extender for is varied depending on the source s resolution and features. - 20m (66 feet) -- HDMI 1.3 w/deep Color/1080p, Dolby TrueHD or DTSHD losless multi-channel audio - 30m (99 feet) -- HDMI 1.2 at 1080p with Multichannel Audio - 45m (148 feet) -- HDMI 1.2 at 720p or 1080i with Multichannel Audio All stated distances are for use with CAT-6a (Augmented CAT-6) cabling that is terminated according to the ANSI/TIA/EIA-568B specification. ANSI/TIA/EIA-568A termination can be used but may cause marginal distance loss. CAT-5e and CAT-6 cable can be used but distance ratings will be shortened. Ratings for CAT-5e cabling is as follows: - 50 feet (15 meters) -- HDMI 1.3 w/deep Color, 1080p HD and Dolby TrueHD Lossless Multichannel 7.1 Audio feet (37 meters) -- HDMI 1.2 at 1080p with Multichannel 5.1 Audio feet (60 meters) -- HDMI 1.2 at 720p or 1080i with Multichannel 5.1 Audio

5 Both CAT-6a cables (VIDEO and DDC) must be used for extension. HDMI 1.3 compliant. Please see page 3 for a list of supported HDMI 1.3 features. HDCP compliant. FEATURES Features Flexible extension of high-bandwidth HDMI 1.3 thanks to the performance and reliability of 75Ohm RG-6U Coax cable. Audio and video are transmitted digitally over the 75Ohm RG-6U Coax cable for zero signal loss. Single Link Range: 1080p/60, 12 bit color depth, 1920x1200. Compliant with HDMI 1.3, HDCP 1.1 and DVI1.1 standards Supports digital video formats in Deep Color Mode at up to 12bits/color Supports PCM L/R audio Supports IR Pass thru function and control HDMI source devices (set-top box, DVD player and Blue ray DVD Player ) in Receiver by its IR remote controller. Supports Cascade function in Transmitter and Receiver and easy to build a network system by installer. Features Lip-Sync Pass Through 340 MHz (up to 12 bit YUV p) Deep Color Supported (XV Color Supported)

6 Cascade function in Transmitter and Receiver. CEC Pass Through & xvycc Supported Package Includes (1) TX HDMI Over Single Coax Transmitter (1) 6 Foot HDMI Cable (M-M) (1) 6 Foot IR Emitter Cable (1) 12V DC Power Supply (1) Set of Wall Mounting Plates (1) User s Manual TRANSMITTER UNIT PANEL LAYOUT Front Panel HDMI Input 1 HDMI Input 2 IR Emitter Source LED Power LED Back Panel

7 DC 12V1A Power Input IR Receiver Cascade Port Output Port TRANSMITTER UNIT PANEL DESCRIPTIONS 1 HDMI Input Port Connect the two HDMI sources to source 1 and 2 input port. 2 Power Indicator LED This LED indicator will become active once the included 12V DC power adapter has bee properly connected between the transmitter unit and an open wall power socket. 3 12V1A DC Power Input Port Connect the included 12V1A DC power supply to this input port. 4 Coax BNC Port Connect a 75Ohm RG-6U Coax cable between this output port and the input port on the receiving unit. Connect extra 75Ohm RG-6U Coax cable between cascade port and the input port on the extra receiving unit.

8 5 IR Port (IR Emitter) Connect a IR Emitter Cable this IR port and paste IR emitter module on the IR receiver zone of HDMI source (set-top box, DVD player and Blue ray DVD Player ). CONNECTING AND OPERATING How to Connect the TX HDMI Over SINGLE COAX TRANSMITTER WITH CASCADE FUNCTION 1. Connect the HDMI source device to the HDMI Over Single Coax Extender transmitter unit using the supplied HDMI cable. 2. Connect one 75Ohm RG-6U Coax cables between the output port of transmitter and input port of number A receiver. 3. Connect one 75Ohm RG-6U Coax cables between the cascade port of transmitter and input port of number B receiver. 4. Connect the HDTV display HDMI input port to the HDMI Over Coax receiver using a HDMI cable. 5. Connect the included 12V DC power supplies to both the transmitter and receiver units. 6. Power on the output device first and the source second.

9 SPECIFICATIONS Video Amplifier Bandwidth MHz Video Output p/60, 12 bit color depth, 2k and 1920x1200 max. res Input DDC Signal... 5 Volts p-p (TTL); Input Video Signal: 1.2 Volts p-p HDMI Connector... Type A, 19 Pin Female Link Connector... BNC Shielded Power Supply... 12V DC / Power Consumption: 12 Watts max. Operating Temperature... 0 C - 40 C Shipping Weight... 3 lbs. Dimensions W x 1.3 H x 3.3 D

10 HDMI Over Single Coax Receiver Part # User Manual

11 CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Receiver Unit Panel Layout 5 Receiver Unit Panel Descriptions 6 Connecting and Operating the HDMI Over Coax Extender 7 Mounting Plate Installation 8 Specifications

12 INTRODUCTION The HDMI Over Single Coax Extender-Receiver TheHDMI Over Single Coax Extender sends HDMI signals Over just one 75Ohm Coaxial cable -- up to 400 feet away. The HDMI Over Single Coax Extender supports HDMI 1.2 and the newer HDMI 1.3 with features such as Deep Color and 1080p. DVI-D Computer video can also be transmitted with a DVI-to-HDMI cable By using standard and widely available 75Ohm RG-6U cables, the HDMI Over Single Coax Extender makes HDMI signal extensions easier than with heavy and expensive copper cables and more robust than with optical fiber. How it connects The HDMI Over Single Coax Extender system consists of a Transmitter and a Receiver. The HDMI source (set-top box, DVD player, or gaming console) connects to the sender box with the supplied 6-foot HDMI cable. The receiver box connects to the HDTV display in the same way -- up to

13 400 feet away. One 75Ohm RG-6U Coax cables link the sender and receiver. Power is applied to the sender and receiver with the included 12V DC power supplies. HDMI picture emerges on the HDTV display. Note:The HDMI Over Single Coax Extender is HDCP compliant. OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE EXTENDER FOR HDMI OVER SINGLE COAX The distance that a signal will be carry over the Extender for HOC-120 is varied depending on the source s resolution and features. - 20m (66 feet) -- HDMI 1.3 w/deep Color/1080p, Dolby TrueHD or DTSHD lossless multi-channel audio - 30m (99 feet) -- HDMI 1.2 at 1080p with Multichannel Audio - 45m (148 feet) -- HDMI 1.2 at 720p or 1080i with Multichannel Audio All stated distances are for use with CAT-6a (Augmented CAT-6) cabling that is terminated according to the ANSI/TIA/EIA-568B specification. ANSI/TIA/EIA-568A termination can be used but may cause marginal distance loss. CAT-5e and CAT-6 cable can be used but distance ratings will be shortened. Ratings for CAT-5e cabling is as follows: - 50 feet (15 meters) -- HDMI 1.3 w/deep Color, 1080p HD and Dolby TrueHD Lossless Multichannel 7.1 Audio feet (37 meters) -- HDMI 1.2 at 1080p with Multichannel 5.1 Audio feet (60 meters) -- HDMI 1.2 at 720p or 1080i with Multichannel 5.1

14 Audio Both CAT-6a cables (VIDEO and DDC) must be used for extension. HDMI 1.3 compliant. Please see page 3 for a list of supported HDMI 1.3 features. HDCP compliant. FEATURES Features Flexible extension of high-bandwidth HDMI 1.3 thanks to the performance and reliability of 75Ohm RG-6U Coax cable. Audio and video are transmitted digitally over the 75Ohm RG-6U Coax cable for zero signal loss. Single Link Range: 1080p/60, 12 bit color depth, 1920x1200. Compliant with HDMI 1.3, HDCP 1.1 and DVI1.1 standards Supports digital video formats in Deep Color Mode at up to 12bits/color Supports PCM L/R audio Supports IR Pass thru function and control HDMI source devices (set-top box, DVD player and Blue ray DVD Player ) in Receiver by its IR remote controller. Supports Cascade function in Transmitter and Receiver and easy to build a network system by installer. Features Lip-Sync Pass Through

15 340 MHz (up to 12 bit YUV p) Deep Color Supported (XV Color Supported) Cascade function in Transmitter and Receiver. CEC Pass Through & xvycc Supported Package Includes (1) RX HDMI Over Single Coax Receiver (1) 6 Foot HDMI Cable (M-M) (1) 6 Foot IR Receiver Cable (1) 12V DC Power Supply (1) Set of Wall Mounting Plates (1) User s Manual RECEIVER UNIT PANEL LAYOUT Front Panel HDMI Output IR Receiver Power LED Indicator Back Panel

16 DC 12V 1A Power Input IR Receiver Input Port Cascade Port RECEIVER UNIT PANEL DESCRIPTIONS 1 12V1A DC Power Input Port Connect the included 5V DC power supply to this input port. 2 Power Indicator LED This LED indicator will become active once the included 5V DC power adapter has bee properly connected between the sender unit and an open wall power socket. 3 HDMI Output Port Connect the HDMI cable from HDTV display to HDMI output port. 4 Coax BNC Port Connect a 75Ohm RG-6U Coax cable between this output port and the input port on the transmitter unit. Connect extra 75Ohm RG-6U Coax cable between cascade port and the input port on the extra receiving unit.

17 5 IR Port (IR Receiver) Connect a IR Receiver Cable to IR port and fix IR receiver cable near to your HDTV display.. CONNECTING AND OPERATING How to Connect the RX HDMI Over SINGLE COAX RECEIVER WITH CASCADE FUNCTION 1. Connect the HDMI source device to the RX HDMI Over Single Coax Extender transmitter unit using the supplied HDMI cable. 2. Connect one 75Ohm RG-6U Coax cables between the output port of transmitter and input port of number A receiver. 3. Connect one 75Ohm RG-6U Coax cables between the cascade port of receiver and input port of number C receiver. 4. Connect the HDTV display HDMI input port to the HDMI Over Coax receiver using a HDMI cable. 5. Connect the included 12V DC power supplies to both the transmitter and receiver units. 6. Power on the output device first and the source second.

18 SPECIFICATIONS Video Amplifier Bandwidth MHz Video Output p/60, 12 bit color depth, 2k and 1920x1200 max. res Input DDC Signal... 5 Volts p-p (TTL); Input Video Signal: 1.2 Volts p-p HDMI Connector... Type A, 19 Pin Female Link Connector... BNC Shielded Power Supply... 12V DC / Power Consumption: 12 Watts max. Operating Temperature... 0 C - 40 C Shipping Weight... 3 lbs. Dimensions W x 1.3 H x 3.3 D