CREATE YOUR STYLE MINI PROJECTS VALENTINE S DAY 2013

Transcription

1 CREATE YOUR STYLE MINI PROJECTS

2 MINI PROJECT CASCADE OF LOVE CHANDELIER EARRINGS Materials SWAROVSKI ELEMENTS Product Group Article No. Amount Size Color Color Code Beads pcs. 8 mm Amethyst 204 Beads pcs. 4 mm Amethyst 204 Pendants pcs. 17 mm Rosaline 508 Supplies: 2 D Rings TierraCast Spiral Hearts TierraCast Royal Pinch Bail TierraCast mm jump rings TierraCast Add a Bead earwires TierraCast gauge Beadalon Artistic Wire STEP 1: STEP 2: STEP 3: STEP 4: STEP 5: Cut wire into 4 2 pieces and 2 3 pieces and set aside. Using one 2 piece of wire make a simple loop on one end and attach one spiral heart. Then slip on fi ve Swarovski Beads art mm Amethyst and make a simple loop at the other end. Repeat 3 more times and set aside. Using one Pendant art mm Rosaline attach one Royal Pinch Bail. Then attach one 8 mm jump ring. Repeat one more time and set aside. Using one 3 piece of wire make a simple loop on one end and attach the pendant created in step 3. Repeat one more time and set aside. Using one earwire slip on one Bead art mm Amethyst and make a simple loop. Repeat one more time and set aside. Continuation on next page

3 Cascade of Love Chandelier Earrings, page 2 STEP 6: STEP 7: STEP 8: Using one D Ring attach one wire set made in step 2 to the fi rst hole in the D Ring. Repeat with a second wire set make in step 2 and attach to fi fth hole in the D Ring. Continue using this D Ring attach one wire set made in step 4 to the third hole. Attach the earwire made in step 5 to the D Ring set. Repeat steps 6-7 to create second earring.

4 MINI PROJECT TRIPLE NESTED WILD HEART NECKLACE Materials SWAROVSKI ELEMENTS Product Group Article No. Amount Size Color Color Code Beads pcs. 14 x 11 mm Amethyst 204 Beads pcs. 8 mm Crystal 001 Beads pcs. 4 mm Crystal 001 Beads pcs. 4 mm Rosaline 508 Pendants pc. 37 mm Rosaline 508 Supplies: 19 embossed brass cable chain TierraCast Medium Hammertone Ring TierraCast Large Hammertone Ring TierraCast Hammertone Heart Toggle TierraCast Large Spiral Pinch Bail TierraCast mm Disk Spacers TierraCast x2 crimp beads TierraCast mm jump rings TierraCast mm jump rings TierraCast Beadalon stringing wire Scotch Tape STEP 1: STEP 2: Using one Swarovski Pendant art mm Rosaline and one Large Hammertone Ring attach Large Spiral Pinch Bail capturing the ring inside of the bail. Using 2 10 mm jump rings, and embossed chain, attach pendant to center point of chain and set aside. Cut beading wire into 2 20 pieces and set aside. STEP 3: Using one piece of wire tape one end closed. Slip on one Bead art mm Crystal, one and one Bead art mm Rosaline. Repeat this pattern 50 more times and tape end and set aside. Continuation on next page

5 Triple Nested Wild Heart Necklace, page 2 STEP 4: STEP 5: STEP 6: Using one piece of wire tape one end closed. Slip on one Bead art mm Crystal, one Bead art Rosaline, one Bead art x 1 0mm Amethyst, one Bead art Rosaline, one Bead art mm Crystal, one 3 mm disk spacer, one Bead art mm Crystal, one Bead art Rosaline, one Bead art x 10 mm Amethyst. Using the following pattern: one Bead art Rosaline, one Bead art mm Crystal, one 3mm disk spacer, one Bead art mm Crystal, one Bead art Rosaline, one Bead art x 10 mm Amethyst. Repeat nine more times. Now slip on one Bead art Rosaline and one Bead art mm Crystal. Tape end and set aside. Using one Medium Hammertone ring attach string of Beads from step 3 using crimp bead. Then attach string of Beads from step 4 using crimp bead. Then attach chain from step 1 using two 6 mm jump rings. Repeat this for other side using 2nd Medium Hammertone Ring. Using one 6 mm jump ring attach one end of Hammertone Heart Toggle to Medium Hammertone Ring. Repeat for other side with other end of Hammertone Heart Toggle to complete Necklace.

6 MINI PROJECT LOVE S TWISTED AND WILD HEART BRACELET Materials SWAROVSKI ELEMENTS Product Group Article No. Amount Size Color Color Code Beads pcs. 8 x 6 mm Crystal 001 Beads pcs. 10 x 8 mm Jet 280 Beads pcs. 8 mm Crystal 001 Beads pcs. 3 mm Crystal 001 Beads pcs. 3 mm Jet 280 Beads pcs. 12 mm Light Siam 227 Supplies: 1 Hammertone Oval TierraCast Lock & Key Toggle TierraCast x2 crimp Beads TierraCast mm oval jump rings TierraCast mm jump rings TierraCast headpins TierraCast Beadalon stringing wire Scotch Tape STEP 1: STEP 2: STEP 3: Using a headpin slip on one Swarovski Bead art mm Jet, one Bead art mm Light Siam, and one Bead art mm Jet. Wire wrap to fi nish. Repeat one more time and set aside. Using a headpin slip on one Bead art mm crystal, one Bead art mm Light Siam, and one Bead art mm Crystal. Wire wrap to fi nish and set aside. Cut wire into 5 8 pieces and set aside. Using one piece of wire tape one end closed. Slip on eight Beads art mm Crystal, one Bead art mm Jet, one Bead art mm Light Siam, one Bead art mm Jet, and nine Beads art mm Crystal. Tape end and set aside. Continuation on next page

7 Love s Twisted and Wild Heart Bracelet, page 2 STEP 4: STEP 5: STEP 6: STEP 7: STEP 8: STEP 9: Using one piece of wire tape one end closed. Slip on two Beads art x 6 mm Crystal, one Bead art mm Jet, one Bead art mm Light Siam, one Bead art mm Jet, seven Beads art x 6 mm Crystal, one Bead art mm Jet, one Bead art mm Light Siam, one Bead art mm Jet, and seven Beads art x 6 mm Crystal. Tape end and set aside. Using one piece of wire tape one end closed. Slip on eleven Beads art x 6 mm Jet, one Bead art mm Crystal, one Bead art mm Light Siam, one Bead art mm Crystal, and three Beads art x 6 mm Jet. Tape end and set aside. Using one piece of wire tape one end closed. Slip on four Beads art mm Crystal, one Bead art mm Jet, one Bead art mm Light Siam, one Bead art mm Jet, and thirteen Beads art mm Crystal. Tape end and set aside. Using one piece of wire tape one end closed. Slip on eleven Beads art x 6 mm Crystal, one Bead art mm Jet, one Bead art mm Light Siam, one Bead art mm Jet, and seven Beads art x 6 mm Crystal. Tape end and set aside. Using the key end of the toggle attach one 8 mm jump ring. To this jump ring crimp on (in order) each of the strings of crystal made in steps 3-7. Using the Hammertone Oval link crimp the other end of each of the strings in the same order and set aside. Using the lock end of the toggle attach two 8 mm jump rings connecting this end to the Hammertone Oval rind from step 8. STEP 10: Using five 4 mm oval jump rings create a chain and at the end of the chain attach one of the heart drops created in step 1. Attach to the Hammertone Ring from step 8. STEP 11: Using three 4 mm oval jump rings create a chain and at the end of the chain attach one of the heart drops created in step 1. Attach to the Hammertone Ring from step 8. STEP 12: Using two 4 mm oval jump rings create a chain and at the end of the chain attach one of the heart drops created in step 1. Attach to the Hammertone Ring from step 8.

8 MINI PROJECT FLOATING WILD HEART NECKLACE Materials SWAROVSKI ELEMENTS Product Group Article No. Amount Size Color Color Code Round Stones pcs. 12 mm Crystal Copper F 001 COP F Beads pcs. 12 mm Crystal AB 001 AB Beads pcs. 12 mm Crystal Golden Shadow 001 GSHA Beads pcs. 12 mm Crystal Copper 001 COP Beads pcs. 17 mm Crystal AB 001 AB Beads pcs. 17 mm Crystal Golden Shadow 001 GSHA Beads pcs. 17 mm Crystal Copper 001 COP Supplies: 2 TierraCast 12mm Twisted Round Rivoli Frame ( ) 1 TierraCast Bar & Ring ( ) 2 TierraCast 8mm open jump rings ( ) 2 feet of 24 g wire 2 TierraCast oval Open jump rings ( ) 10 feet 0.5 mm black leather 36 inches of chain (picture shows 12 inches each in three styles) Double epoxy glue STEP 1: STEP 2: Glue one Swarovski Rivoli Round Stone article mm onto the twisted round Rivoli frame. Repeat once. Set aside. Cut leather into (5) two foot long pieces. (Note: there may be wastage of leather.) Cut the wire into (6) four inch pieces. Cut the chain into (6) six inch pieces. Set aside. Continuation on next page

9 Floating Wild Heart Necklace, page 2 STEP 3: STEP 4: STEP 5: STEP 6: STEP 7: STEP 8: STEP 9: Beginning in the center of one piece of leather, make an overhand knot. Add (1) Swarovski Wild Heart Bead art your choice of color/size. Make an overhand knot on the opposite side of the Bead. Working on one side of the center Bead, leave a space on the leather about Make an overhand knot, add (1) Swarovski Wild Heart Bead art your choice of color/size. Make an overhand knot on the opposite side of the Bead. Continue in this manner for both sides of the center Bead and add 4 5 Swarovski Beads total. Lay fl at the piece made in step 3. Beginning in the center of the second piece of leather, make an overhand knot. Add (1) Swarovski Wild Heart Bead art your choice of color/size. Make an overhand knot on the opposite side of the Bead. Working on one side of the center Bead, leave a space on the leather about Make an overhand knot, add (1) Swarovski Wild Heart Bead art your choice of color/size. Make an overhand knot on the opposite side of the Bead. Continue in this manner for both sides of the center Bead and add 4 5 Swarovski Beads total. (Note: compare where you knot the Swarovski Wild Heart Bead art on the second strand against those of the fi rst strand. This helps to keep the Swarovski Beads in different positions when all the pieces lie next to each other. Continue step 4 for the remaining three pieces of leather. (Note: before you begin this step, you want to make sure that the glue is set under the Swarovski Round Stones art mm.) Line up two pieces of knotted leather and thread through one of the outside loops of the Rivoli frame. Fold the leather tails back on itself. Using one piece of wire wrap all four strands of leather towards the Rivoli frame, wrapping about 4 6 times, keeping the wire snug. Nip the excess wire and tuck the tails next to the coil made. Repeat for the second Rivoli frame. You may trim the leather tails to your taste. Repeat step 6 using only one piece of knotted leather and the center loops of each Rivoli frame. Repeat step 6 using the last two strands of knotted leather and the last loop of each Rivoli frame. Open one 8 mm jump ring and attach to one Rivoli frame and each of the three pieces of chain. Close the jump ring. Repeat for the opposite side. STEP 10: Open one oval jump ring and attach to the other end of the three pieces of chain and to one half of the clasp set. Close the jump ring. Repeat for the opposite side.

10 MINI PROJECT WILD HEART EARRINGS Materials SWAROVSKI ELEMENTS Product Group Article No. Amount Size Color Color Code Beads pcs. 12 mm Light Siam 227 Beads pcs. 17 mm Crystal AB 001 AB Supplies: 1pr TierraCast Earwire ( ) 2 6 mm TierraCast open jump rings ( ) 2 feet 0.5 mm black leather 1 foot 24 g wire STEP 1: STEP 2: STEP 3: STEP 4: Cut leather into 4 pieces 6 inches long. Cut wire into 2 pieces 6 inches long. Attach one open jump ring to each earwire. Close jump ring. Take (2) 6 inch pieces of leather and thread through one jump ring. Hold tails even. Take one piece of wire, while holding it over the leather strands begin to wire wrap towards the jump ring about 4 5 times, capturing all four leather strands. (Note: keep wire snug over the leather strands.) Nip off the ends of the wire and gently tuck the wire tails next to the coil made. Repeat for second side. On one strand of leather thread (1) Swarovski Wild Heart Bead art mm Light Siam, (1) Swarovski Wild Heart Bead art mm Crystal AB and (1) Swarovski Wild Heart Bead art mm Light Siam. While moving the Swarovski Beads out of the way, make an overhand knot at the end of the leather strand which holds the Beads in place. Repeat for second side. On second strand of leather thread (1) Swarovski Wild Heart Bead art mm Light Siam. While moving the Bead out of the way, make an overhand knot at the end of the leather strand which holds the bead in place. Repeat for the second side.