9 Control Equipment. Control Unit System Series ConSig 8040

Transcription

1 9 Control Equipment 01719E00 The enclosure series ConSig 40 makes it possible to assemble different control units in a clear layout. Due to the fact that a wide range of control devices is available this enclosure covers a broad field of applications. Explosion protection according to CENELEC IEC NEC For use in Zone 1 and Zone 2 Zone 21 and Zone 22 Standard and customized units 3 sizes available Enclosures in glass fibre reinforced polyester resin Up to 3 insertion points available per individual unit Control unit with 4 insertion points, see under control stations series 8146, enclosure 8146/.24. Individual units can be combined into larger units Options: flanges in brass or moulded material metal plates where metal cable entries are used equipment identification plate can be attached Contact elements 82 and 8208 with SIL certificates On request with contact element 8208 for extra low currents, with open-circuit and short-circuit monitoring 9/1Zones 1 & 2, 21 & 22

2 9 Pushbutton 40/11X-01L50BA E00 Mushroom pushbutton 01646E00 d 38 mm black 40/11X-03L24BA E00 002E E00 Mushroom stay-put button d 38 mm EM-STOP 40/11X-10L07BA E E00 d 38 mm EM-STOP 40/11X-10L07BA E E E00 Mushroom stay-put button d 55 mm EM-STOP 40/11X-15L07BA E E E00 Mushroom stay-put button key release d 38 mm EM-STOP 40/11X-09XXXBA E E00 9/2

3 9 Key-operated switch 2 40/11X-08M01XA switching positions key withdrawable in 0 + I 08750E E00 Key-operated switch 3 switching positions key withdrawable in I II 08752E00 40/11X-08M03XA Twin pushbutton 05725E00 40/11X-23D01BA E E00 Illuminated pushbutton spring return included (clear,, yellow,, blue) 015E00 40/11X-35C06BA E00 Indicating lamp Diode indicating lamp 40/11X-54C06XXXX included (clear,, yellow,, blue) 006E00 050E00 9/3

4 9 40/11X-26M01XA Selector switch with contact element 82 2 switching positions 003E E00 Selector switch with switch element 82 3 switching positions 40/11X-26M03XA E E00 051E00 Control switch, 2 pole with switch element 08 with large actuator not padlockable 40/11Z-31E...F E00 Control switch, 2 pole with switch element 08 with small actuator padlockable in 1 position 40/11Z-34E..XF with small actuator padlockable in 1 position 05726E00 9/4

5 9 40/11Z-32E..XF Control switch, 2 pole with switch element 08 with small actuator not padlockable 05711E00 Twin pushbutton 40/12X-01L13BA05-01L08BA E E00 Diode indicating lamp and pushbutton included (clear,, yellow,, blue) 09767E00 40/12X-54C06XXXX- 01L08BA E E00 Diode indicating lamp and twin pushbutton included (clear,, yellow,, blue) 09767E00 40/12X-54C06XXXX- 23D01BA E E00 9/5

6 9 Ammeter /12Z-40XXXXN Ammeter > Measurement range, see ammeter 8405 > Measuring method (direct = d or converter = W) 05576E00 Triple pushbutton 40/13X-01L13BA05-01L08BA05-01L15BA E00 011E00 052E00 2 pushbuttons with indicating lamp included (clear,, yellow,, blue) 09767E00 40/13X-54C06XXXX- 01L13BA05-01L08BA E00 012E E00 9/6

7 Twin pushbutton with mushroom stay-put button key release and indicating lamp included (clear,, yellow,, blue) 09767E00 40/13X-54C06XXXX- 23D01BA05-09XXXBA05 013E E00 Ammeter 8405 and control switch 08, 2 pole Ammeter > Measurement range, see ammeter 8405 > Measuring method (direct = d or converter = W) 40/13Z-40XXXXN..- 31E...F E00 Control switch 08, 4 pole with large actuator not padlockable 40/23Z-31E...F E00 9/7

8 Control switch, 4 pole and ammeter Control switch 08 4 pole, with large actuator not padlockable, ammeter /23Z-40XXXXN..- 31E...F. Ammeter > Measurement range > Measuring method (direct = d or converter = W) 05777E00 Control switch, 4 pole and indicating lamp Control switch 08 4 pole, with large actuator not padlockable 40/23Z-54C06XXXX- 31E...F Indicating lamp 10 > included (clear,, yellow,, blue) 05778E00 Technical Data Explosion protection Gas explosion protection E II 2 G Ex edqm ia/ib [ia/ib] II, IIA, IIB, IIC, T6, T5 or T4 Dust explosion protection E II 2 D Ex td A21 IP 65 T C, T 95 C, T 130 C Certificates Gas explosion protection PTB 01 ATEX 1105 Dust explosion protection PTB 01 ATEX 1105 Other certificates Rated voltage Rated current SIMTARS (Australia), CSA (Canada), UL (USA), CTB (Russia), UL do Brasil (Brazil) max. 690 V, AC depends on components used Operating temperature range - 20 C C - 50 C C on request Cable entry Standard: Special: 1 x M 25 x 1.5; cable gland 8161; side below (D); directly mounted into enclosure wall in side C (top) and/or side D (below); 1 x M 20 x 1.5; 1 x M 25 x 1.5 metal cable glands are possible; mounting of metal cable glands in metal flange or via metal adapter plate Max. cross-section for connection 2.5 mm 2 Terminal tightening torque max. 1.2 Nm Flanges In standard design the enclosures are without flanges. On request they can be fitted with flanges on sides C and D. Flanges are available in: polyester resin or in brass. Type of Protection IP66 Material Enclosure material Polyester resin (glass fibre-reinforced) Seal PU foam Cover fixing M 4, cheese head screws, imprescriptible, stainless steel 9/8

9 9 Dimensional Drawings (All Dimensions in mm) - Subject to Alterations 70 C C A B A B Ø5,50 Ø5,50 D D 04582E00 ConSig 40/11 ConSig 40/ E00 70 C C A B A B ,50 93 Ø5,50 Ø5,50 D 045E E E00 ConSig 40/13 ConSig 40/23 ConSig 40/11 and ConSig 40/12 combination a D Dim. a [mm] min. max. M M E00 Additional dimensions for cable entries Series 8161 Flange Dim. b [mm] Brass 16 b Moulded material 16 Additional dimensions for flanges 04585E00 We reserve the right to make alterations to the technical data, weights, dimensions, designs and products available without notice. The illustrations cannot be conside binding. 9/9