Professional food processor. getting the best from your new food processor... Safety. Blade holder

Transcription

1 Professional food processor Please read and keep these instructions getting the best from your new food processor... Safety The safety cover must always be fitted over the blender drive when processing. The safety cover must always be fitted over the motor shaft when blending. When using the blender always make sure there are ingredients inside. When processing the bowl and lid must be correctly located to operate the micro switch mechanism. Blade holder When using the blade holder the spindle must always be fitted.

2 Important safety instructions The use of any electrical appliance requires the following of basic common sense safety rules. Primarily there is danger of injury or death and secondly the danger of damage to the appliance. These are indicated in the text by the following two conventions: WARNING: Danger to the person! IMPORTANT: Damage to the appliance! In addition we offer the following essential safety advice. Location Remove all packaging and retain for future reference. Ensure the processor is used on a firm, flat surface. Do not use the processor outdoors or in a bathroom. Do not place the processor on a highly polished wooden surface as damage may occur to the surface. Do not place the processor on or near a hot surface such as a hot plate or radiant rings or near a naked flame. Do not let the mains lead overhang the edge of the table or work-top, or touch hot surfaces. Do not place the appliance on or near a hot gas or electric hob, or in a heated oven. Children Children do not understand the dangers associated with operating electrical appliances. Never allow children to use this appliance. Personal safety WARNING: The processor/blender blades are very sharp. Handle with care when using and cleaning. WARNING: Keep hands and utensils out of the processor/blender when it is switched on. Allow hot liquids to cool before blending, always ensure the lid is fitted correctly. WARNING: Avoid touching moving parts. Keep hands, hair, clothing as well as spatulas and other utensils away from processor/blender blades during operation, to prevent personal injury and / or damage to the appliance. WARNING: To protect against risk of electric shock NEVER immerse the processor/blender body in water or in any other liquid and always ensure the electrical connections are kept dry. Other safety considerations The use of attachments or tools not recommended or sold by Morphy Richards may cause fire, electric shock or injury. Do not use the processor/blender for other than its intended use. Do not overfill the blender/processor bowl. This could cause damage to the motor. The 5 amp fuse will blow if the blender is overloaded. Replace the fuse and do not exceed the maximum recommended volumes. Refer to the operating chart. When using the blender ensure the lid is in place before switching on and do not remove the lid until the blade has stopped rotating. Processor/blender lid must be on and located correctly for it to work. Electrical requirements Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating Current). If the socket outlets in your home are not suitable for the plug supplied with this appliance, the plug should be removed and the appropriate one fitted. WARNING: The plug removed from the mains lead, if severed, must be destroyed as a plug with bared flexible cord is hazardous if engaged into a live socket outlet. Should the fuse in the 13amp plug require replacement, a 5 amp BS1362 fuse must be fitted. WARNING: This appliance must be earthed. Unpacking and using your machine for the first time Carefully unpack your new processor and all its attachments and tools, checking them against the illustrations at the beginning of this book to familiarise yourself with the product. Wash all the parts which are safe to immerse in water. Never immerse the processor body or whisk arm Á in water or any other liquid. These may be wiped over with a clean, damp cloth - but only when unplugged from the electrical outlet. Disconnect the processor from the mains supply when not in use, before taking off attachments and before cleaning. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Ring the helpline number for advice on examination and repair. 2

3 Easy reference table Attachments & tools Name Function Types of food Max vol. Speed Time Special notes METAL BLADE Chopping Meat, vegetables, 700g secs pulse gives control over È cheese, chocolate texture Blending Soups, drinks 700g secs Pureeing Cooked vegetables 600g secs and potatoes, fruit DOUGH BLADE Mixing Pastry, scones 350g min max max vol = weight of flour Î Cakes (total weight) 1kg 6 1 min max Kneading Bread dough 600g flour 6 20 secs max vol = weight of flour 400g water + 2 min rest Do not over process SLICING/ Slicing Vegetables, cheese, 5-6 SHREDDING potatoes, fruit Ú BLADES and Shredding Vegetables, cheese, 5-6 HOLDER fruit, chocolate Ô Ï Ì Ó Ò Chipping Potatoes, vegetable 5-6 Speed of control depends on batons thickness required WHISK Whisking Egg whites 6 eggs mins Á (min 2-max 6) Ë Cream 570ml secs Do not over process BLENDER Blending/ Soup, purees, drinks, 1.5 lt secs-1 min Begin with low liquidising milkshakes, batters + pulse speed and increase to high if required DO NOT PROCESS FOR LONGER THAN RECOMMENDED TIME DO NOT EXCEED RECOMMENDED MAXIMUM VOLUMES 3

4 Features of your food processor Processor body Safety cover Blender drive On/off speed pulse control dial fi Motor shaft fl Storage dome Blender Blender lid Goblet Processor bowl Processor lid  Large food pusher Ê Small food pusher Á Whisk arm Ë Whisk attachment È Chopping blade Í Chopping blade cover Î Dough blade Ï Course grating blade Ì Ó Ô apple Ò Ú Û Ù Fine grating blade Medium grating blade Blade holder Spindle Chipping blade Adjustable slicing blade Storage dome lid Spatula Ê Á Â Í Ë Storage dome assembly Û È apple Î Ú Ò Ô Ï Ù Ó Ì fi fl Storage 1 Place the protective cover Í on to the chopping blade È and place into the processor bowl for storage. Your food processor has been designed with a storage dome to hold various attachments. 2 Place selected attachments in the storage dome see storage dome assembly above. 4

5 Operating controls The processor and blender control dials have settings as follows: Off/ + 6 speeds Pulse The speed can be adjusted whilst the processor or blender is in use. Using the pulse button allows greater control over the texture of the food produced. It is only intended to be used for short bursts of processing or blending. Operating the food processor Setting up 1 Ensure the processor is unplugged from the mains. 2 Fit the safety cover onto the blender drive, align arrows and turn clockwise firmly until it clicks into place (the arrows will now be lined up). IMPORTANT: The food processor will not operate without the safety cover in place. 3 Place the processor bowl onto the processor body and turn clockwise until arrows line up. 4 When fitted correctly, the handle will be to the right of the assembly, and the ridge on the base of the bowl will fit into the slot at the back of the processor body. 5 Fit the appropriate attachment onto the motor shaft fi. Refer to following section, Fitting and using the tools. 6 Holding the processor lid by the feed tube, fit the lid by rotating clockwise. 7 Ensure that the lid tab has clicked into place and the arrows are lined up. 6 P LOCK Arrow locking system for safety cover, blender and processor. 5 8 Ensure that both food pushers are fitted before processing. Fitting and using the tools In general, all attachments which are fitted within the processor bowl must be firmly attached to the motor shaft. Always adjust the attachments until you are sure that they are correctly fitted. Chopping blade È 1 Fit the processor bowl as 2 Remove the protective cover Í from the metal chopping blade. 3 Fit the blade over the motor shaft and fit firmly into place. WARNING: Use extreme caution - blades are sharp. Always handle the chopping blade by its central plastic section. 4 Place the food into the bowl. 5 Fit the lid and click into 6 Plug in the processor and switch on. Use the appropriate speed. If the processor does not come on, check that the safety cover and processor lid are both correctly fitted. WARNING: For safety always use the food pusher when putting food into the feeder tube. Never feed by hand. 7 Use the food pusher Ê to add food into the processor bowl through the feeder tube. 8 When the processing is complete, remove the blade from the bowl before removing the processed food. 9 WARNING: After cleaning, always replace the protective cover Í on the metal chopping blade È.

6 Dough blade Î 1 Fit the processor bowl as 2 Fit the plastic dough blade over the motor shaft and press firmly into place. 3 Place the ingredients into the bowl. 4 Fit the lid and click into 5 Fit the food pusher. 6 Plug in the processor. 7 Turn the processor on selecting maximum speed and proceed until the dough forms into a ball. 8 Remove the blade from the bowl before the dough. IMPORTANT: When kneading dough, do not operate the machine longer than 30 seconds. Afterwards wait at least 2 minutes before operating the machine again. WARNING: For safety always leave the pusher in place whilst operating the processor. Whisk attachment Á & Ë 1 Fit the processor bowl as 2 Click the whisk head Ë into the short extension of the whisk arm Á. 3 Place the long extension of the whisk attachment onto the motor shaft fi. 4 Add ingredients into the bowl. 5 Fit the lid, food pusher and click into place as detailed in the 6 Plug in the processor. 7 Turn the processor on selecting maximum speed. IMPORTANT: Never use the whisk attachment for dough kneading. Grating blades Ï Ì Ó 1 Place the blade of your choice on the blade holder Ô. 2 Press both ends of the blade onto the blade holder until it clicks into place. 3 Fit the processor bowl as 4 Fit the spindle into the hole underneath the blade holder and turn clockwise to lock into position. 5 Fit it over the motor shaft and press firmly into place as indicated. WARNING: Use extreme caution -blades are sharp. 6 Fit the lid and click into 7 Plug in the processor and select the appropriate speed. 8 Use the food pusher Ê to add food into the processor bowl through the feeder tube. Adjustable slicing blade Ú 1 Adjust the slicing blade to the thickness you require and turn anti-clockwise to increase the blades height and clockwise to reduce. 2 Fit the processor bowl as 3 Fit it over the motor shaft and press firmly into place as indicated. WARNING: Use extreme caution -blades are sharp. 4 Fit the lid and click into 5 Plug in the processor and select the appropriate speed. 6 Fit the large food pusher  into the tube on the processor lid. 7 Use the small food pusher Ê to add food into the processor bowl through the feeder tube. 6

7 Chipping blade Ò 1 Fit the processor bowl as 2 Fit the spindle into the hole underneath the chipping blade and turn clockwise to lock into position. 3 Fit it over the motor shaft and press firmly into place as indicated. WARNING: Use extreme caution -blades are sharp. 4 Fit the lid and click into 5 Plug in the processor and select the appropriate speed. 6 Use the food pushers to add food into the processor bowl through the feeder tube. Blender 1 Fit the safety cover onto the processor body, align arrows and turn clockwise firmly until it clicks into place (the arrows will now be lined up). The blender will not operate without the safety cover in place. 2 Place the blender into its location on the processor body, with handle to the right. Turn clockwise until blender clicks in place and the arrows are aligned. 3 Place food in the blender. 4 Place the lid onto the blender and lock into position. The blender will not work if the lid is not fitted and locked correctly. 5 Place the goblet onto the lid. 6 Plug in the processor. 7 Always operate the blender with the lid in place. 8 When blending hot liquids, remove the goblet. 9 Never operate the blender with more than 1500ml of liquid or when empty. Cleaning processor accessories 1 Switch the processor off and unplug from the electrical socket. 2 All accessories and processor tools can be washed in hot soapy water except for the whisk arm Á,blender and processor body. WARNING: Extreme care must be taken when washing the metal blades as these items are extremely sharp. 3 Clean the processor body and whisk arm by wiping with a damp cloth. WARNING: Always unplug the processor body before cleaning. 4 To clean the blender fill with warm water and washing up liquid, run for 30 seconds on maximum speed and repeat as necessary. Use with warm water only. Hints and tips The metal blade È can be used for chopping meat, fish vegetables, cheese etc, setting the speed to maximum. For finer chopping, increase the length of time you process. For coarser chopping, use the pulse button for a few seconds and monitor food texture. Pre-cut larger pieces to make them fit into the feed tube. When chopping hard foods (eg meat, cheese) cut into 1 inch/2.5cm cubes. For shredding and chipping, place food horizontally into the feed tube, for slicing place the food vertically. When blending, pour the liquids in first and then add the solid food. Begin blending at the lower speed and increase when needed. When slicing carrots, place 2 at a time in the feeder tube to keep upright. 7

8 Two-year guarantee It is important to retain the retailers receipt as proof of purchase. Staple your receipt to this back cover for future reference. Please quote the following information if the product develops a fault. These numbers can be found on the base/or rear of the product. Model no. Serial no. All Morphy Richards Products are individually tested before leaving the factory. In the unlikely event of any appliance proving to be faulty within 28 days of purchase it should be returned to the place of purchase for it to be replaced. If the fault develops after 28 days and within 24 months of original purchase, you should contact the helpline number quoting model number and serial number on the product, or write to Morphy Richards at the address shown. You will be asked to return the product (in secure, adequate packaging) along with a copy of proof of purchase. Subject to the exclusions set out below (1-5), the faulty appliance will then be repaired or replaced and dispatched usually within seven working days of receipt. If for any reason this item is replaced during the two-year guarantee period, the guarantee on the new item will be calculated from original purchase date. Therefore it is vital to retain your original receipt or invoice to indicate the date of initial purchase. To qualify for the two-year guarantee the appliance must have been used according to the manufacturers instructions. For example kettles should have been regularly descaled. Morphy Richards shall not be liable to replace or repair the goods under the terms of the Guarantee where: 1 The fault has been caused or is attributable to accidental use, mis-use, negligent use or used contrary to the manufacturers recommendations or where the fault has been caused by power surges or damage caused in transit. 2 The appliance has been used on a voltage supply other than that stamped on the products. 3 Repairs have been attempted by persons other than our service staff (or authorised dealer). 4 Where the appliance has been used for hire purposes or non-domestic use. 5 Morphy Richards are not liable to carry out any type of servicing work, under the guarantee. This guarantee does not confer any rights other than those expressly set out above and does not cover any claims for consequential loss or damage. This guarantee is offered as an additional benefit and does not affect your statutory rights as a consumer. This guarantee is valid in the UK and Ireland only. Helpline If you have any difficulty with your appliance, do not hesitate to call us. We re more likely to be able to help than the store from where you bought it. Please have the following information ready to enable our staff to deal with your query quickly: Name of the product Model number as shown on the underside of the appliance or rating plate Serial number Morphy Richards products are intended for household use only. Morphy Richards has a policy of continuous improvement in product quality and design. The Company, therefore, reserves the right to change the specification of its models at any time. Registered address The After Sales Division, Morphy Richards Ltd, Mexborough, South Yorkshire, England, S64 8AJ Helpline (office hours): , Republic of Ireland FP48490M UK Rev