MATERIAL SAFETY DATA SHEET Page 1 of 5

Transcription

1 MATERIAL SAFETY DATA SHEET Page 1 of Identification of the substance / Preparation and of the company / Undertaking Use of the substance / preparation: Manufacturer / Supplier: SOLVENT CONTAINING PIGMENT DISPERSION ON RESIN BASIS A.M Ramp & Co GmbH, Druckfarbenfabrik Lorsbacher Str. 28 D Eppstein, Germany PB 100 D Eppstein, Germany Phone: Telefax: U.S. Distributor / Supplier: Diversified Printing Techniques, Inc South Ridge Dr. Charlotte, NC Phone: Telefax: Internet: Emergency Contact: Chemtrec: info@diverprint.com 02. Hazards Identification Health (see also section 15): Excessive breathing of vapors has narcotic effects, may cause drowsiness. Degreasing effects. Prolonged or repeated contact may cause inflammation. Moderate eye irritation by direct contact. Environment: Harmful for aquatic environment. In case of fire may be formed: halogen containing gases. 03. Composition / Information on ingredients Hazardous components XYLENE ; CAS-No. : MAK-Value: 100 ppm : Xn ; R 10 R 20/21 R 38 CYCLOHEXANONE ; CAS-No. : MAK-Value: 20 ppm : Xn ; R 10 R 20 PROPYLENEGLYCOLMOMOETHYLETHERACETATE ; CAS-No. : MAK-Value: - : R 10 R 67

2 MATERIAL SAFETY DATA SHEET Page 2 of First Aid Measures After Inhalation: Take victim to fresh air. Remove contaminated clothing. After skin contact: Dab with soft tissue and wash with plenty of water and soap. Do not use any organic solvent. After eye contact: Immediately rinse with plenty of water, keep eyelid lifted. In case of irritation see physician. After ingestion: On vomiting lie person on their side and keep respiratory tract free. See physician. Do not induce vomiting. 05. Fire Fighting Measures Suitable extinguishing media: Alcohol resistant foam, CO 2, water spray Unsuitable extinguishing media: Water jet Hints: Do not allow extinguishing agent to soak into soil. Take measures to collect contaminated firefighting agents. Do not breathe vapors/fumes use self-contained breathing apparatus. 06. Accidental Release Measures Personal precautions: Avoid contact with skin, eyes and clothes. Remove sources of ignition. Proper ventilation of workplace. Environmental precautions: Prevent material to enter soil, drains or water courses. Methods for cleaning up/collecting: Absorb with sand, kieselguhr or other inert material. For disposal fill in adequate containers and handle as special waste. See also section # Handling and Storage Information for safe handling: Avoid release of vapors. Be sure to apply good room ventilation. Do not eat, drink or smoke at the workplace. Requirements to be met by storerooms and containers: Keep container well closed after use. Avoid frequent warming above 50 C. Keep away from food. Preferably store in original container. Hints: Product is flammable and can form combustible mixtures with air. Avoid electrostatic charging of container. 08. Exposure Control and Personal Protection Exposure: Install proper room ventilation in working- and storage area. Personal protective equipment: Respiratory protection No special requirements with good room ventilation. Eye protection When splashes may occur (pouring material into another container) wear splash-proof goggles. Body protection Apply mild handcream. Use suitable protective gloves. (i.e. neoprene or polyvinyl alcohol) General protection When handling the product wear usual protective work clothes.

3 MATERIAL SAFETY DATA SHEET Page 3 of Physical and Chemical Properties Relevant safety data ph-value: n.a. Appearance: Pasteous Boiling at ( C): 137 Odor: Characteristic Flashpoint ( C): 25 Shade: White Ignition temperature ( C): 325 Supporting fire: By Solvents Lower explosion limit (Vol%): 1.0 Solubility in water: 0 % fully soluble components Upper explosion limit (Vol%): 9.8 Viscosity: > 90 sec in DIN-4-cup Vapor pressure (mbar): 8.0 Density (g/ml at 20 C): ca Stability and Reactivity Conditions / Materials to avoid Elevated temperature in the container may cause combustion. (Increase of vapor pressure) Hazardous reactions / decomposition products Direct contact with oxidants will yield decomposition/inflammation, liberating gases. Dangerous decomposition products: see section # Toxicological Information Experience on practice Excessive vapor concentration may yield narcotic effects. 12. Ecological Information General ecological information Biological degradability exists for some components of the product. Do not allow product to enter drains, groundwater or water courses. 13. Disposal Considerations Product EWCnew: (Used printing inks, containing hazardous material) / proposal. Liquid remainder is special waste. Do not dispose together with normal domestic waste. See local regulations. Send via licensed waste handler to dump, incineration or redistillation in accordance with local regulations. Emptied, cleaned and dry containers can be recycled.

4 MATERIAL SAFETY DATA SHEET Page 4 of Transport Information Land transport ADR/RID: KEINE GÜTER DER KLASSE 3 PRINTING INK Class : Kemlercode : UN Number : Code : ADR : Tunnel restriction code : group : III Label: 3 Maritime transport IMDG/GGVSea: No material of class 3. IMDG-Code : EmS number : UN number : 1210 Marine Poll : IMDG (<= 30 I) PRINTING INK group : III Label : 3 Air transport ICAO-TI and IATA-DGR: Class : UN number : 1210 PRINTING INK, flammable group : III Label : Regulatory Information Flammability: R 10: Flammable. Danger symbol and danger designation No regulation. R-phrases - - S-phrases 7/9 Keep container tightly closed and in a well-ventilated place. 16 Keep away from sources of ignition No smoking. 29 Do not empty into drains. 35 This material and its container must be disposed of in a safe way. TA-air: 0 % Class I ; % Class II ; 5 10 % Class III ; WGK (VwVws): 2

5 MATERIAL SAFETY DATA SHEET Page 5 of Other Information Further information Contents of organic solvents at 24%. These data sheets are accurate to the best of our knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.