CSI S UDS: UNIFORM DRAWING SYSTEM

Transcription

1 United States Version 3.1 National CAD Standard A Consensus Standard Incorporating Industry Publications UNIFORM SYSTEM COMPONENT OF NCS CSI S UDS: UNIFORM SYSTEM SET ORGANIZATION SET ORGANIZATION: MODULE 1 MODULE 1

2 LIST OF SHEETS O - OPERATIONS Z - CONTRACTOR/SHOP S X - OTHER DISCIPLINES R - RESOURCE T - TELECOMMUNICATIONS E - ELECTRICAL M - MECHANICAL D - PROCESS P -PLUMBING F - FIRE PROTECTION Q -EQUIPMENT I - INTERIORS A - ARCHITECTURAL S - STRUCTURAL L - LANDSCAPE C CIVIL W CIVIL WORKS B GEOTECHNICAL V SURVEY/MAPPING H HAZ MATERIALS G - GENERAL SET HIERARCHY DISCIPLINE HIERARCHY Organize Sheets as Illustrated Some, All, or More Categories may Apply A(A) - NNN Discipline Designators (Levels 1 & 2) AA - NNN Sheet Type Designator AA - NNN Sheet Sequence Number A = Alphabetical character N = Numerical character SHEET IDENTIFICATION STANDARD SHEET IDENTIFICATION Level 2 Discipline Designator Optional Hyphen Must Follow Discipline Designator G General H Hazardous Materials V Survey/ Mapping B Geotechnical W Civil Works C Civil L Landscape S Structural A Architectural I Interiors Q Equipment F Fire Protection P Plumbing D Process M Mechanical E Electrical A - NNN T Telecommunications R Resource X Other Disciplines DISCIPLINE DESIGNATORS Level 2 Modifies Level 2 Optional Z Contractor/ Shop Drawings Hyphen Must O Operations Follow Discipline Designators A A - NNN AS Architectural Site CD Civil Demolition QL Laboratory Equipment FX Fire Suppression EP Electrical Power EL Electrical Lighting TT Telephone DISCIPLINE DESIGNATORS

3 AA N NN SHEET TYPE 0 General (symbols legend, notes, etc.) 1 Plans (horizontal) 2 Elevations (vertical) 3 Sections (sectional,] wall & stair) 4 Large Scale Views 5 Details 6 Schedules and Diagrams SHEET TYPE ND SEQUENCE DESIGNATORS 7 User Defined* 8 User Defined* 9 3D Representations (isometrics, perspectives, photographs) AA N NN SEQUENCE SHEET TYPE & SEQUENCE DESIGNATORS *User-Defined Sheet Type Designators May NOT Fall in Another Category Always Include 2- digit Sequence Designator Do NOT use 00 Sheet Sheet Title G Title Sheet C Notes and Symbols S Foundation Plan A Floor Plan A Exterior Elevations A Wall Sections A Door and Frame Schedule P Plumbing Site Plan P Plumbing Riser Diagram M HVAC Plan E Power Plan E Lighting Plan E Electrical Details SHEET NAME EXAMPLES SAMPLE DESIGNATORS Sheet CD-101 CG-101 LI-101 SF-101 SF-501 AS-101 AG-101 IN-601 ES-101 EP-101 EL-101 TI-101 Sheet Title Site Demolition Plan Grading Plan Landscape Irrigation Plan Roof Framing Plan Framing Details Architectural Site Plan Signage Plan Interior Finish Schedules Electrical Site Plan Electrical Power Plan Electrical Lighting Plan Intercom Plan SHEET NAME EXAMPLES SAMPLE DESIGNATORS Hyphen Must Follow Level-2 Discipline Designator (NEW)

4 NCS AND MASTERFORMAT 2004 MF 2004 COORDINATION NCS 3.1 Coordinated with MasterFormat 2004 SHEET ORGANIZATION SHEET ORGANIZATION: MODULE 2 MODULE 2 MARK SIZE mm (in) TYPICAL USES A 216 x 279 (8.5 x 11) Project book; supplemental drawings; mock-up sheets. B 279 x 432 (11 x 17) Supplemental drawings; mock-up sheets. C 432 x 559 (17 x 22) Small projects in preferred plan scale. D 559 x 864 (22 x 34) Projects in preferred plan scale; government projects. E 864 x 1118 (34 x 44) Large projects in preferred plan scale; mapping & GIS. NOT SHOWN: A0-A4, A-F COMMON SHEET SIZES COMMON SHEET SIZES

5 SHEET LAYOUT AREAS SHEET LAYOUT Production Data Area Drawing Area Title Block Area PRODUCTION DATA AREA PRODUCTION DATA AREA Production Information: Production block File path Sheet file name Default settings Pen assignments Printer/ plotter commands Overlay drafting control data Reference file (s) Layers plotted Production hours Scanning scale block AREA AREA AREA Contains: Keynotes Key plans Schedules Other graphic Information

6 D D C B A A AREA GRID C B AREA Divided into Modules Columns are Numbers Rows are Letters D D C B A MODULE A AREA GRID MODULE C B AREA Modules Identified by Letter & Number A Drawing May Comprise Several Modules Use Module Coordinates for ID XXXX XXXX XXX C4 XXXX GRID XXX XX XX XXXXX XX XXXXX XXX XXXXXXXX XXXX XXXXXX X:X NUMBER AREA Drawing Number as Determined by Coordinate

7 TITLE BLOCK AREA TITLE BLOCK AREA Contains: Designer Project Issue Block Client/ Management Sheet Title Sheet ID Information Horizontal Text Format: Vertical Text Format TITLE BLOCK TEXT ALIGNMENT TITLE BLOCK AREA DESIGNER BLOCK COMPONENTS DESIGNER ID BLOCK Contains: Name Address Telephone & Fax address Consultants Professional Seals

8 PROJECT ID BLOCK COMPONENTS PROJECT ID BLOCK Contains: Project name Project address Building / facility name Construction phase sequence Project logo ISSUE BLOCK COMPONENTS ISSUE BLOCK Contains: Phase Issue Dates Addendum issue dates Clarification dates Revision issue dates MANAGEMENT BLOCK COMPONENTS MANAGEMENT BLOCK Contains: Drawing Preparer s Project Number CAD Drawing File Number Drawn by Checked by Copyright Always Horizontal, Regardless of Text Format.

9 SHEET TITLE AND SHEET ID BLOCKS SHEET TITLE SHEET ID BLOCKS Always Horizontal, Regardless of Text Format ROOM FINISH SCHEDULE ROOM ROOM # NAME FLOOR BASE WALL CEILING NOTES ENTRY VCT RUBBER PAINT SAP OFFICE CPT RUBBER PAINT SAP 2 SCHEDULES SCHEDULES: MODULE 3 MODULE 3 HEADING MARK ITEM DESCRIPTION FEATURE SCHEDULES COMPONENTS SCHEDULES Objectives: Consistency Systematic Approach Contains 4 Parts: 1. Subject Title (Heading) 2. Column ID Item (Mark) 3. Description 4. Distinguishable Feature

10 HEADING MARK ITEM FEATURE NOTES Notes Legend: 1 Note A 2 Note B 3 Note C SCHEDULES NOTES 1 SCHEDULES May Also Include Notes Including Notes Legend Saves Schedule Space ROOM NO ROOM FINISH SCHEDULE ROOM NAME FLOOR BASE WALL CEILING NOTES 101 ENTRY VCT RUBBER PAINT SAP OFFICE CPT RUBBER PAINT SAP 2 PLUMBING FIXTURE SCHEDULE MARK DESCRIPTION MFR MODEL SUPPLY FITTING SUPPLY PIPE(S) DRAIN TRAP CONNECTIONS CW HW WASTE VENT NOTES SCHEDULE TIERS TIERS Simple, Single- Tier Sub-Columns: Double-Tier Heading Column ID Column Sub-ID Row ID Description Cell Schedule Locations in the Project Manual: NEW in NCS version 3.1: Schedules with products from multiple sections can now be located in project manual according to MasterFormat 2004 number SCHEDULE LOCATION SCHEDULE LOCATION Depends on Project/ Client Simple Schedules (ie Sealant) located at End of Spec Sections Schedules Covering Multiple Sections: Locate on Drawings OR: May be Located in MF 2004 Dedicated Section

11 DRAFTING CONVENTIONS DRAFTING CONVENTIONS: MODULE 04 MODULE 04 DRAFTING CONVENTIONS DRAFTING CONVENTIONS OVERVIEW DRAFTING CONVENTIONS Includes: Drawing Orientation and North Arrow Grid System Drawing Block Format Drafting Layout Scale Lines Dimensions DRAFTING CONVENTIONS DRAFTING CONVENTIONS OVERVIEW DRAFTING CONVENTIONS Subjects Covered: Material Indications Cross-Ref Symbols Drawing Types General Plans Elevations Sections Large Scale Views Details Schedules & Diagrams 3-D Representations Mock-Up Drawing Set

12 ORIENTATION AND NORTH ARROW ORIENTATION & NORTH ARROW Sides of Building Parallel with Sheet Edges Detail Orientation Same as Floor Plan Line Width in mm Fine Thin Medium Wide 0.50 Extra Wide 0.70 LINE WIDTHS LINE WIDTHS 151 STORAGE A STORAGE B DOOR SYMBOLS EXAMPLE Each Door Has Unique ID Door Number Same as Room No. Multiple Doors Labeled with A-Z (New NCS 3.1 Symbol)

13 1 REFERENCE GRID INDICATORS REFERENCE GRID INDICATORS D C B A REFERENCE GRID Vertical Grid at Top, Numbered Left-Right Horizontal Grid on Right, Alphabetized Bottom-Top TERMINATOR MARKS TERMINATOR MARKS Consistent Orientation SECTION X:X XXXXX XX XXXXX XXX BLOCK FORMAT BLOCK FORMAT Reference Grid & Dimension Area Graphic Notation Area Margin Title Area Drawing Module Lines

14 XXXX XXXX XXX XXXX SECTION X:X GRID XXX XX XX XXXXX XX XXXXX XXX BLOCK COMPONENTS BLOCK FORMAT Reference Grid & Dimension Area Graphic Notation Area Margin Title Area Drawing Module Lines SECTION X:X X X X X X BLOCK TITLE AREA TITLE AREA Drawing Module Lines Drawing ID Drawing Number Drawing Title Drawing Scale North Arrow Graphic Scale (Optional) XXXX XXXX XXX XXXX SECTION X:X GRID XXX XX XX XXXXX XX XXXXX XXX BENEFITS OF NCS BENEFITS Simplifies & organizes Standardizes placement of drawing components Standardizes placement of information for all drawings Consistent format for all drawings Works with all projects regardless of size

15 FIRST FOURTH SECOND THIRD NOTE BLOCK BLOCK LOCATION AND ORGANIZATION BLOCK LOCATION Locate Frequently- Used Drawing Block Lowest, by Title Move Upward, to Left TERMS & ABBREVIATIONS TERMS AND ABBREVIATIONS: MODULE 05 MODULE 5 TERMS & ABBREVIATIONS TERMS AND ABBREVIATIONS OVERVIEW MODULE 5 Includes: Preferred Terms Standard Drawing Abbreviations When to Use Abbreviations Formats for Abbreviations

16 TERMS & ABBREVIATIONS TERMS AND ABBREVIATIONS OVERVIEW MODULE 5 Provides: Consistent Communication Consistent Terms Notes on Common Usage and Non-Preferred Terminology SYMBOLS 3 D2 A SYMBOLS: MODULE 06 MODULE 6 Includes: Symbol Classifications Over 6,000 Graphic Symbol Representations How Symbols are Organized NOTATIONS: MODULE 07 NOTATIONS MODULE 7

17 CODE CONVENTIONS CODE CONVENTIONS: MODULE 08 MODULE 8