user manual digital clock radio IVR 006 VOICE

Transcription

1 user manual digital clock radio AM AM VOICE IVR 006

2 Thank you for purchasing the Moshi Voice Control (VC) Digital Clock Radio. We are excited to welcome you into the world of Interactive Voice Response (IVR) technology and the ability to now control your electronics through voice and touch interaction. We invite you to review this manual in order to fully understand all the unique features and benifits of your new Digital Clock Radio. Please visit our web site to learn more about our current and future VC products. To join our newsletter please send an For general questions please send all s

3 IVR 006 DIGITAL CLOCK RADIO TABLE OF CONTENTS Warning and Cautions Battery Precautions Preliminary Setup for Digital Clock Radio Location of Controls Inserting the Batteries About the Voice Control Using Touch Voice Control Setting the Time Setting the Alarm Choosing the Alarm Sound Manual Control Asking for the Time/Alarm Time(s) Asking for Today s date Turning the Alarm ON/OFF Snooze Command Play Radio Play Sleep Sound Sleep Timer for AM/FM Radio LCD Brightness Display Help Command Thank You Command Unit Specifications Frequently Asked Questions Warranty PAGE

4 CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the unit s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. IMPORTANT SAFETY INSTRUCTIONS All the safety and operating instructions should be read, adhered to and followed before the unit is operated. SAVE THESE INSTRUCTIONS

5 DANGER To reduce the risk of electric shock, burns, fire or injury: 1. Do no use while bathing or in a shower. 2. Do not place or store unit where it can fall or be pulled into a tub or sink. 3. Do not place in, drop or submerge in water or other liquid. 4. Do not reach for unit that has fallen into water. 5. Care should be taken so that objects do not fall and liquids are not spilled onto the unit. WARNING 1. Close supervision is necessary when this appliance/product is used by or near children or mentally disabled individuals. 2. Use this unit only for its intended use as described in this manual. 3. Remove batteries when unused for long periods of time. 4. Never drop or insert an object into any opening. 5. The unit should be situated away from direct sunlight or heat sources such a radiators, electric heaters, stoves, or other units (including amplifiers) that produce heat. 6. Avoid placing on top of stereo equipment that radiates heat. Do not allow cord to touch hot surfaces. Wrap cord loosely around the unit when storing. 7. To avoid the risk of electric shock, do not disassemble or attempt to repair the unit. Incorrect repair can cause risk of electric shock or injury to persons when unit is used. 8. Do not operate in the presence of explosive and/or flammable fumes. 2

6 FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the distance between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. This equipment complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This equipment may not cause harmful interference. 2. This equipment must accept any interference received, including interference that may cause undesired operation. Modifications not authorized by the manufacturer may void the user s authority to operate this device. 3

7 BATTERY PRECAUTIONS Dispose of the old batteries properly. Do not dispose of the old batteries in a fire. Do not leave the batteries where a child or pet could play with or swallow them. If the batteries are swallowed, contact a physician immediately. The batteries may explode if mistreated. Do not attempt to recharge or disassemble the batteries. Use only fresh batteries of the required size and type. Do not mix old and new batteries, different types of batteries, or rechargeable batteries of different capacities. The product requires 3 AA batteries. SAVE THESE INSTRUCTIONS 4

8 MOSHI DIGITAL CLOCK RADIO SETUP 1. Remove plastic screen guard from LCD. 2. Install 3 new AA batteries into the bottom compartment. 3. Plug AC adapter (1) into 100V - 240V wall outlet and then into the DC IN jack (2). 4. Make sure the IVR indicator (3) and voice icon (4) are both lit. 1 2 voice set DC in reset line in line out fm AM AM VOICE 4 5. Say Hello Moshi and the Digital Clock Radio will respond with Command Please. 6. Say one of the following 10 voice commands in a clear normal voice: you say... time set time alarm set alarm alarm sound play sleep sound turn off (the)alarm snooze today s date play radio and moshi tells you the current time allows you to set time tells you the wake up time allows you to set alarm 1/2 offers you 3 different alarms sounds offers you 3 different sleep sounds turns off the alarm delays alarm for 9 minutes tells you today s date turns on the radio 5

9 LOCATION OF CONTROLS 1. Control Panel 2. Display 3. Microphone Stereo Speaker 5. Rear Panel 6. Battery Compartment

10 LCD time and date audio selection alarm times FM AM AM PM AUX AM PM SNOOZE PM VOICE IVR status bar IVR indicator snooze on/off alarm on/off indicator 7

11 CONTROL PANEL on and off/reset alarm adjust volume adjust LCD brightness tune radio station audio selection set wake up time 1 (quick set) preset radio station set wake up time 2 (quick set) snooze / ivr / sleep off sleep on 8

12 INSERTING THE BATTERIES 1. Remove the battery compartment cover by pushing the latch and lifting the cover off. 2. Insert 3 AA batteries according to the polarity indicators. 3. Replace the battery compartment cover by inserting the tabs into the slots and snapping the latch securely back into place. ABOUT THE VOICE CONTROL Please make sure that you say all commands clearly and in a normal voice as if you were talking to a person directly in front of you. Note: Please avoid speaking directly into the microphone. It is best to use the Digital Clock Radio in quiet environments and to use the Digital Clock Radio at approximately a 5-10 ft. range. USING TOUCH VOICE CONTROL 1. To activate the Digital Clock Radio without giving the initial voice command Hello Moshi, simply press the snooze / ivr / sleep off button. 2. The Digital Clock Radio will respond command please. 3. Say one of 10 voice command. Note: You can interrupt when the Digital Clock Radio speaks by pressing the "snooze / ivr / sleep off" button. 9

13 IVR AND VOICE ICON The voice icon (1) indicates that the Digital Clock Radio is in voice mode. Once the voice button is pressed, the voice and ivr indicator will show that Moshi is listening for the command word Hello Moshi. After saying Hello Moshi the Digital Clock Radio will respond with Command Please voice set DC in reset line in line out fm AM AM VOICE 1 The ivr icon (2) indicates when Moshi is listening for the users command. STATUS BAR The status bar (3) located above the "ivr" icon (2) shows the user how well the Digital Clock Radio understood your command. The better your command was heard, the more bars will be displayed. 3 AM AM VOICE poor ok good Note: By watching to the Digital Clock Radio s status bar will help improve your ability to control the Digital Clock Radio by voice. 10

14 SETTING THE TIME After you activate the Digital Clock Radio: 1. Say set time. 2. The Digital Clock Radio will respond tell me the current time. 3. State the time in a clear voice. Example: ten twenty two PM. 4. The Digital Clock Radio will then repeat the time back to you. Example: the time is now set to ten twenty two PM. 5. Your time is set! Note: The Digital Clock Radio understands oh for zero. For example, six oh three PM will translate into in 6:03 PM. SETTING THE ALARM After you activate the Digital Clock Radio: 1. Say set alarm. 2. The Digital Clock Radio will respond please choose alarm 1 or alarm Say alarm 1 (or alarm 2) to set the alarm. 4. The Digital Clock Radio will respond tell me the time you want the alarm to sound. 5. State the alarm time in a clear voice. Example: six thirty AM. 6. The Digital Clock Radio will then repeat the alarm time back to you: the alarm time is now set to six thirty AM. 7. Your alarm time is set and will appear in the bottom left side corner of the display! 11

15 SETTING THE ALARM (QUICK SET) 1. Press and hold Alarm 1 or Alarm 2 button. 2. The Digital Clock Radio will respond please tell me the alarm time. 3. Say your desired wake up time. TURNING THE ALARM ON/OFF 1. Press the Alarm 1 or Alarm 2 button. 2. Alarm 1 or 2 will turn ON/OFF. CHOOSING AN ALARM SOUND After you activate the Digital Clock Radio: 1. Say alarm sound. 2. The Digital Clock Radio will respond please choose alarm 1 or alarm Say your selection. 4. The Digital Clock Radio will respond please choose fm radio, am radio, or alarm sound. 5. Say your selection and the Digital Clock Radio will verbally confirm your selection. If you choose alarm sound 6. The Digital Clock Radio will respond to choose an alarm sound, say alarm 1, alarm 2 or alarm 3 giving an example of each alarm sound after each numbered choice. 7. Say your choice. For example: alarm 2. 12

16 SET THE TIME, DATE, ALARM, AND ALARM SOUND MANUALLY voice set + - voice set + DC in reset line in line out fm DC in reset line in line out fm Time Date Alarm Alarm Sound Save 1. Press and hold the set button on the rear panel for 2 seconds. 2. The current time will start to flash on the main LCD screen. 3. Press the + or - buttons to reach the current hour and minute. 4. Press set to save your selection and to now set the date. 5. Press + or - buttons to reach the current year. 6. Press set button to save, the month will flash. 7. Press + or - buttons to reach the month. 8. Press set button to save, the day will flash. 9. Press + or - buttons to reach the day. 10. Press set button to save, the Alarm 1 time will flash. 11. Press the + or - buttons to reach the current hour and minute. 12. Press set button to save, the Alarm 1 Sound will flash. 13. Press the + or - buttons to reach FM or AM Radio, Alarm 1, 2, or Press set button to save, the Alarm 2 time will flash. 15. Repeat steps to set Alarm 2 time and Sound. 16. Press set button to save! 13 Note: At anytime during the above process, you can hold the set button for 5 seconds to quickly save your settings and exit the manual set up.

17 ASKING FOR THE TIME After you activate the Digital Clock Radio: 1. Say time. 2. The Digital Clock Radio will respond by telling you the correct time. ASKING FOR THE ALARM(S) TIME After you activate the Digital Clock Radio: 1. Say alarm. 2. The Digital Clock Radio will respond by telling you the current set alarm time and status for both Alarm 1 and Alarm 2 ASKING FOR TODAY S DATE After you activate the Digital Clock Radio: 1. Say today's date. 2. Digital Clock Radio will respond by telling you today's date. TURNING THE ALARM(S) ON/OFF After activating the Digital Clock Radio: 1. Say set alarm. 2. The Digital Clock Radio will respond please choose alarm 1 or alarm Say your selection and follow the audio instructions. 4. The alarm will sound at the set time, gradually increasing in volume for 20 seconds, and will remain ON for 1 hour. Note: When the alarm sound is either fm or am radio the user must press the power button to reset the alarm. The alarm will turn off for the day, but will reset for the following day. 14

18 5. When the alarm sounds are sounding, to turn off the alarm, say turn off [the] alarm between alarm sound to shut off the alarm for the day. 6. The Digital Clock Radio will respond by telling you the time and the alarm is off and will reset for the next day. Note: Turning the alarm off manually using the quick set button will turn off the alarm permanently. To turn the alarm on, the user will need to set the alarm time or press the same button once more. TURNING THE ALARM(S) ON/OFF Press to turn off Alarm 1 Press to turn off Alarm 2 Note: These buttons are master Alarm ON/OFF buttons. They will turn off the alarm permanently, until pressed again. When the alarm is sounding, please either use the verbal commands or press the power button to reset the alarm for the day. 15

19 MANUAL SNOOZE When the alarm is ringing, press the snooze / ivr / sleep off button and the Digital Clock Radio will snooze and ring again in 9 minutes. VOICE CONTROL (VC) SNOOZE When the alarm sound (not radio) is ringing, say snooze in between the alarm and the Digital Clock Radio will snooze and ring again in 9 minutes. Note: The Digital Clock Radio will snooze until the user either says turn off [the] alarm or presses the alarm reset button. PLAY RADIO After activating the Digital Clock Radio: 1. Say play radio. 2. The Digital Clock Radio will respond please choose fm [radio] or am [radio]. 3. Say your selection. For example fm radio Note: When the radio is playing the mode AM Radio, and AUX (auxiliary input). button allows you switch between FM Radio, OPERATING THE DIGITAL CLOCK RADIO 1. Press power button to turn on the radio. 2. Press mode button to switch between fm radio, am radio, and auxiliary (line in). 16

20 SETTING PRESET STATIONS When the radio is playing: 1. Press and hold one of the three preset 2 3 buttons for 1 second. 2. The station will blink on the display indicating that the preset is set. PLAY SLEEP SOUND After activating the Digital Clock Radio: 1. Say play sleep sound. 2. The Digital Clock Radio will respond sleep timer, please choose 15, 30, 45, or 60 minutes. Say your selection. For example 15 [minutes] 3. The Digital Clock Radio will confirm your timer selection and respond, please choose 4. sound 1, sound 2, or sound 3 giving an example of each sleep sound after each numbered choice. 5. Say your selection. For example sound 2. PLAY SLEEP SOUND (QUICK SET) 1. Press and hold the sleep button for 1 second. 2. The Digital Clock Radio will respond sleep timer, please choose 15, 30, 45, or 60 minutes. 3. Say your selection. For example 15 [minutes]. 4. The Digital Clock Radio will confirm your timer selection and respond, please choose sound 1, sound 2, or sound 3 giving an example of each alarm sound after each numbered choice. 5. Say your selection. For example sound 2. 17

21 SLEEP TIMER FOR AM/FM RADIO When listening to AM or FM Radio: 1. Press the sleep button and 60 will first appear on the display. 2. Press the sleep button again to cycle between 60 / 45 / 30 / 15 / Off. Note: The sound volume will gradually decrease during the last 5 minutes of each cycle. LCD BRIGHTNESS DISPLAY Press the brightness button to adjust the LCD backlight from High / Low / Off. HELP After you activate the Digital Clock Radio: 1. Say help. 2. The Digital Clock Radio will respond by reciting the voice commands you can say. THANK YOU Once the Digital Clock Radio completes any task please say thank you and the Digital Clock Radio will respond your welcome 18

22 SPECIFICATIONS Battery Power Size Weight AC/DC Adapter 3 AA batteries (not included) 131 x 96 x 100 mm (5.2 x 3.8 x 3.9 in) 0.63 kg (1.4 lb) DC 7 V 800 mah (included) 19

23 FREQUENTLY ASKED QUESTIONS My Digital Clock Radio does not hear my commands. It is important to remember that you cannot give a command while the Digital Clock Radio is speaking. Also make sure the voice button on rear panel is pushed on. How do I know if the Digital Clock Radio is telling AM or PM time? When clock is telling AM time there will be an AM icon on the display, but when in PM time, there will be a PM icon on the display. In addition, when setting time, if you do not specify AM or PM, it will automatically set to AM time. My Digital Clock Radio confuses numbers when setting the time or alarm. This is common in the English language. For example, it is common to confuse 9 and 5. Speak loud, clear, in a normal paced voice and be at least an arm length away. I cannot activate the alarm. After activating the voice control by saying Hello Moshi, say set alarm to turn the alarm on. To turn off or cancel the alarm, say turn off the alarm. Manually, you can turn the alarm on by pressing the Alarm 1 or Alarm 2 buttons on the top of the unit. Can I make the alarm sound louder? Yes, you can increase the volume to any level above "12." To reduce the risk of forgetting to increase the volume of your alarm sound, the Digital Clock Radio does increase to a set level of "12" during the first 20 seconds it sounds. How do I interrupt my Digital Clock Radio? Touching any button except for the volume button will stop the Digital Clock Radio from speaking. How do I reset the Digital Clock Radio? Remove batteries or use the reset button located on the back panel. 20

24 ONE (1) YEAR LIMITED WARRANTY sns international extends a limited one year warranty to the original purchaser, that this product will be free from defects in materials and workmanship under normal and proper use for one year from the date of purchase. sns international s responsibility under this warranty is limited to replacing or repairing, at sns international s option, products or parts determined by sns international to be defective either in materials, or workmanship. To attain warranty service, the customer must deliver the product or the defective part(s), appropriately packed with proof of purchase date to: snsinternational P.O. Box Tarzana, CA All shipping expenses are the customers responsibility. If the product has been updated or superseded, a replacement will be made with a current model of the same quality and function. Warranty of the replacement parts is limited to 90 days or the unexpired portion of the warranty period of the product on which the parts are being used, or whichever is longer. This warranty does not cover any defects or costs caused by: (1) modification, alteration, repair or service of this product by any persons or company other than sns international; (2) physical abuse to, overload of, or misuse of, the product or operation thereof in a manner inconsistent with the use indicated in the instructions; (3) any use of the product other than that for which it was intended; or (4) shipment of the product to sns international for service. This warranty does not cover labor costs. 21

25

26