HPE FlexNetwork MSR 4G SIC Module USIM Card and Antenna Installation Guide

Transcription

1 HPE FlexNetwork MSR 4G SIC Module USIM Card and Antenna Installation Guide Part number: s Installing a USIM card Correct installation

2 Incorrect installation Installing a 4G extender cable Correct installation 2

3 Installing a 4G antenna One 4G extender cable is provided with the interface module. Purchase 4G extender cables as required. Table 1 lists 4G extender cables provided by Hewlett Packard Enterprise. You can also use 4G extender cables from other vendors, for any consequences resulting from which Hewlett Packard Enterprise assumes no liabilities. Table 1 4G extender cables J number JG522A JG666A JG667A 4G extender cable 4G 2.8m Extender Cable 4G 6m Extender Cable 4G 15m Extender Cable Installing a 4G antenna on a router (forjg742a/jg742b/jg744a/jg744b) Installing a 4G antenna on a router (for JG743A/JG743B) When you connect a 4G antenna to a JG743A/JG743B interface module, ensure a minimum distance of 25 cm (9.84 in) between the 4G antenna and any other antenna on the router. If an extender cable is used, ensure a minimum distance of 25 cm (9.84 in) between the 4G antenna and the router. 3

4 >25cm(9.84in) >25cm(9.84in) >25cm(9.84in) >25cm(9.84in) 4

5 >25cm(9.84in) >25cm(9.84in) >25cm(9.84in) Installing a 4G antenna on a rack Installing a 4G antenna on a wall Prepare M2.9 self-tapping screws yourself. 5

6 Installing a GPS antenna When you connect a GPS antenna to a JG743A/JG743B interface module, ensure a minimum distance of 25 cm (9.84 in) between the GPS antenna and any other antenna on the router, and between the GPS antenna and the router. 6

7 Regulatory Compliance Information The module must be installed and used in strict accordance with the manufacturer s instruction as described in the user documentation that comes with this product. Regulatory compliance standards Table 2 Regulatory compliance standards Discipline EMC Standards FCC Part 15 Subpart B (SIC-4G-LTE-A and SIC-4G-LTE-V) ICES-003 (SIC-4G-LTE-A and SIC-4G-LTE-V) EN (SIC-4G-LTE-G) EN (SIC-4G-LTE-G) EN (SIC-4G-LTE-G) EN (SIC-4G-LTE-G) EN (SIC-4G-LTE-G) EN (SIC-4G-LTE-G) EN (SIC-4G-LTE-G) EN (SIC-4G-LTE-G) 7

8 Discipline RF Safety Standards FCC part22 (SIC-4G-LTE-A and SIC-4G-LTE-V) FCC part24 (SIC-4G-LTE-A and SIC-4G-LTE-V) FCC part27 (SIC-4G-LTE-A and SIC-4G-LTE-V) FCC OET 65 MPE(SIC-4G-LTE-A and SIC-4G-LTE-V) RSS-132 (SIC-4G-LTE-A and SIC-4G-LTE-V) RSS-133 (SIC-4G-LTE-A and SIC-4G-LTE-V) RSS-102 (SIC-4G-LTE-A and SIC-4G-LTE-V) EN (SIC-4G-LTE-G) EN (SIC-4G-LTE-G) EN (SIC-4G-LTE-G) UL CSA 22.2 No EN IEC AS/NZS European Directives compliance R&TTE Directive This product complies with the European Radio & Telecommunication Terminal Equipment Directive 1999/5/EC. The most up to date copy of the signed EU Declaration of Conformity can be downloaded from: Search using the model name. 8

9 R&TTE declaration statements: Česky [Czech] Dansk [Danish] Deutsch [German] Eesti [Estonian] English Español [Spanish] Ελληνική [Greek] Français [French] Italiano [Italian] Hewlett Packard Enterprise Company tímto prohlašuje, že tento Zařízení je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Undertegnede Hewlett Packard Enterprise Company erklærer herved, at følgende udstyr zařízení overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Hiermit erklärt Hewlett Packard Enterprise Company, dass sich das Gerät Ausrüstung in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. Käesolevaga kinnitab Hewlett Packard Enterprise Company seadmed vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. Hereby, Hewlett Packard Enterprise Company, declares that this Equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Por medio de la presente Hewlett Packard Enterprise Company declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Hewlett Packard Enterprise Company ΔΗΛΩΝΕΙ ΟΤΙ εξοπλισμός ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ. Par la présente Hewlett Packard Enterprise Company déclare que l'appareil équipement est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Con la presente Hewlett Packard Enterprise Company dichiara che questo attrezzatura è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. 9

10 Latviski [Latvian] Lietuvių [Lithuanian] Nederlands [Dutch] Malti [Maltese] Magyar [Hungarian] Polski [Polish] Ar šo Hewlett Packard Enterprise Company deklarē, ka iekārta atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. Šiuo Hewlett Packard Enterprise Company deklaruoja, kad šis įranga atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Hierbij verklaart Hewlett Packard Enterprise Company dat het toestel uitrusting in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Hawnhekk, Hewlett Packard Enterprise Company, jiddikjara li dan tagħmir jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-dirrettiva 1999/5/EC. Alulírott, Hewlett Packard Enterprise Company nyilatkozom, hogy a aprīkojums megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Niniejszym Hewlett Packard Enterprise Company oświadcza, że urządzenie jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Português [Portuguese] Slovensko [Slovenian] Slovensky [Slovak] Suomi [Finnish] Hewlett Packard Enterprise Company declara que este equipamento está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Hewlett Packard Enterprise Company izjavlja, da je ta oprema v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Hewlett Packard Enterprise Company týmto vyhlasuje, že zariadenie spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. Hewlett Packard Enterprise Company vakuuttaa täten että laitteet tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. 10

11 Svenska [Swedish] Íslenska [Icelandic] Norsk [Norwegian] Hrvatska [Croatian] Härmed intygar Hewlett Packard Enterprise Company att denna utrustning står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Hér með lýsir Hewlett Packard Enterprise Company yfir því að búnaður er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC. Hewlett Packard Enterprise Company erklærer herved at utstyret utstyr er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF. Ovime tvrtka Hewlett Packard Enterprise Company izjavljuje da je ova oprema usklađena s osnovnim preduvjetima i drugim važnim odredbama direktive 1999/5/EZ. WEEE Directive 2002/96/EC The products this manual refers to are covered by the Waste Electrical & Electronic Equipment (WEEE) Directive and must be disposed of in a responsible manner. USA regulatory compliance FCC Part 15 US Federal Communications Commission (FCC) EMC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 11

12 This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. If the customer modifies the equipment without the authorization of Hewlett Packard Enterprise, which directly or indirectly contribute to the equipment incompliance with FCC requirements for Class A digital devices, Hewlett Packard Enterprise is not liable for such interference problem and the expenses incurred there from shall be covered by the customers. RF Requirements RF exposure Hazard Warning This device generates and radiates radio-frequency energy. To ensure compliance with the requirements of FCC radio-frequency exposure, a minimum body to antenna distance of 20cm (8 inch) must be maintained when the device is installed and operated, and a minimum distance of 25 cm between the 4G antennas and between the 4G antenna and the WiFi antenna is required to maintain compliance and receiver reliability. Antennas Only use the supplied antenna. Unauthorized antennas, modifications or change to the antennas could violate FCC regulations and void the user s authority to operate the equipment. Canada regulatory compliance ICES-003 This Class A digital apparatus complies with Canadian Standard ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. RF Compliance Operation is subject to the following three conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device, and (3) a minimum distance of 25 cm between the 4G antennas and between the 4G antenna and the WiFi antenna is required to maintain compliance and receiver reliability. L utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. The term "IC" before the equipment certification number only signifies that the Industry Canada technical specifications were met. 12

13 To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empecher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit etre utilize a l'interieur et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d'emission) est installe a l'exterieur, il doit faire l'objet d'une licence. This device must not be co-located or operated in conjunction with any other unauthorized antenna or transmitter. Brazil regulatory compliance Este produto está homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resolução 242/2000 e atende aos requisitos técnicos aplicados. Para maiores informações, consulte o site da ANATEL Taiwan Regulatory Compliance 1. 本產品在台灣僅支持 LTE900/1800MHz 2. 減少電磁波影響, 請妥適使用 13

14 Documentation To access documentation and support services, go to the Hewlett Packard Enterprise Support Center website: s The information in this document is subject to change without notice. Copyright 2016 Hewlett Packard Enterprise Development LP BOM: 3104A0DN Version: 6PW