ax.premium Road g (Set)

Transcription

1 850 g ax.premium 24 Our new ax-rim line with long-proven lightweight hubs is now completed with system wheel sets for tubular rims. Of course our SRT and SBS technologies are also featured here to safely carry you uphill and back down again. The light rims are responsible for extremely low acceleration values so they will not waste even the tiniest bit of energy on uphill climbs; the stable rims with a high spoke tension of 1300 N also ensure high stiffness and help effectively prevent brake wear during out-of-thesaddle pedalling and guarantee safe, accurate handling downhill. With its seamless brake surface, SBS technology always allows you to stop safely, even in difficult situations. This makes these wheelsets true kings of the hill, but their profile allows them to strut their stuff even on flat surfaces. Premium 24 - TUNE Premium 24 - Extralite Full carbon tubular rims for calliper brake Full carbon tubular rims for calliper brake Tune "Mig 45/Mag 150" Extralite 20 front / 24 rear 20 front / 24 rear 870 g/per pair (without sticker; incl. sticker + 25 grams) +/- 5% 850 g/per pair (without sticker; incl. sticker + 25 grams) +/- 5% 2299,- 2299,-

2 <800 g ax.ultra There are innumerable challenges in road cycling. One of the most emotional challenges certainly is the ride uphill. An ultimate experience every time, both physically and mentally. There is hardly another place than in the mountains of the world of cycling where the cyclist and the material reach their limits more. There, weight is mercilessly for or against you. The wheelsets play the probably most important key role. And this in two respects: firstly, the system weight must be low, secondly small rotating masses accelerate much easier. ax-lightness has combined its entire lightweight construction expertise in the rims of the "Ultra" wheelset. This results in a sensational weight of less than 200 grams per rim. With no limit on spoke tension and air pressure. Consequently, the entire potential of the spokes and hubs can be used to make this wheelset light, stiff and therefore safe. Together with the Extralight hubs und Sapin X-Ray spokes, the wheelset even weighs less than 800 grams. Ultra wheelset Full carbon tubular, 195g/pc Extralite 20 front / 24 rear less than 800g/per pair 2599,-

3 ax.premium g Our new ax-rim line with long-proven lightweight hubs is now completed with system wheel sets for tubular rims. Of course our SRT and SBS technologies are also featured here to safely carry you uphill and back down again. The light rims are responsible for extremely low acceleration values so they will not waste even the tiniest bit of energy on uphill climbs; the stable rims with a high spoke tension of 1300 N also ensure high stiffness and help effectively prevent brake wear during out-of-thesaddle pedalling and guarantee safe, accurate handling downhill. With its seamless brake surface, SBS technology always allows you to stop safely, even in difficult situations. This makes these wheelsets true kings of the hill, but their profile allows them to strut their stuff even on flat surfaces. Premium wheelset - Tune Premium wheelset - Extralite SRT 42 Full carbon tubular SRT 42 Full carbon tubular Tune "Mig 45/Mag 150" Extralite 16 front / rear 20, 20 front / 24 rear 16 front / rear 20, 20 front / 24 rear 950 g/per pair (without sticker; incl. sticker g/per pair (without sticker; incl. sticker + 25 grams) +/- 5% grams) +/- 5% 2399,- 2399,-

4 ax.stream 55 Aero 1140 g No other part of your racing bike shows weaknesses as obviously as the wheelsets do., stiffness and aerodynamics are an explosive combination. Our SRT technology enables us to construct very light and yet stiff bikes, which we have been demonstrating for years. The only thing that was still missing with regard to the ultimative wheelset was aerodynamics at the highest level. With the aid of the latest CFD computer simulations, a rim shape was developed which leaves nothing more to be desired: Propulsion or also sail effect and a steering moment as neutral as possible were developed close to optimum in countless simulation loops. Therefore, cross winds can hardly do you any harm. On the contrary! These rims even generate a sail effect instead of steering you off the track. Internally arranged nipples and a spoke number of 16/20 minimise disruptive influences. The total weight of just 1140/1260 grams gives you a striking advantage uphill! There are people who know exactly what is important it is for these people that we have developed the SRT and stream technologies. ax. Stream 55 Aero - DT SWISS ax. Stream 55 Aero - Tune Full carbon aero tubular rims for calliper brakes, 55mm high, break surface distance 24,5mm, Aero widths 28mm Full carbon aero tubular rims for calliper brakes, 55mm high, break surface distance 24,5mm, Aero widths 28mm DT SWISS 240 Straight Pull Tune "Mig 45/Mag 150" 16 front / 20 rear 16 front / 20 rear 1260 g/per pair +/- 5% 1140 g/per pair +/- 5% 2349,- 2499,-

5 ax.stream 80 Aero 1490 g No other part of your racing bike shows weaknesses as obviously as the wheelsets do., stiffness and aerodynamics are an explosive combination. Our SRT technology enables us to construct very light and yet stiff bikes, which we have been demonstrating for years. The only thing that was still missing with regard to the ultimative wheelset was aerodynamics at the highest level. With the aid of the latest CFD computer simulations, a rim shape was developed which leaves nothing more to be desired: Propulsion or also sail effect and a steering moment as neutral as possible were developed close to optimum in countless simulation loops. Therefore, cross winds can hardly do you any harm. On the contrary! These rims even generate a sail effect instead of steering you off the track. Internally arranged nipples and a spoke number of 16/20 minimise disruptive influences. The total weight of just 1490/1550 grams gives you a striking advantage uphill! There are people who know exactly what is important it is for these people that we have developed the SRT and stream technologies. ax. Stream 80 Aero - DT SWISS ax. Stream 80 Aero - Tune Full carbon aero tubular rims for calliper brakes, 80mm high, break surface distance 24,5mm, Aero widths 28mm Full carbon aero tubular rims for calliper brakes, 80mm high, break surface distance 24,5mm, Aero widths 28mm DT SWISS 240 Straight Pull Tune "Mig 45/Mag 150" 16 front / 20 rear 16 front / 20 rear 1550 g/per pair +/- 10% 1490 g/per pair +/- 10% 2549,- 2699,-

6 ax.stream Aero 1330 g No other part of your racing bike shows weaknesses as obviously as the wheelsets do., stiffness and aerodynamics are an explosive combination. Our SRT technology enables us to construct very light and yet stiff bikes, which we have been demonstrating for years. The only thing that was still missing with regard to the ultimative wheelset was aerodynamics at the highest level. With the aid of the latest CFD computer simulations, a rim shape was developed which leaves nothing more to be desired: Propulsion or also sail effect and a steering moment as neutral as possible were developed close to optimum in countless simulation loops. Therefore, cross winds can hardly do you any harm. On the contrary! These rims even generate a sail effect instead of steering you off the track. Internally arranged nipples and a spoke number of 16/20 minimise disruptive influences. The total weight of just 1330/1430 grams gives you a striking advantage uphill! There are people who know exactly what is important it is for these people that we have developed the SRT and stream technologies. ax. Stream Aero - DT SWISS ax. Stream Aero - Tune Full carbon aero tubular rims for calliper brakes, 55-80mm high, break surface distance 24,5mm, Aero widths 28mm Full carbon aero tubular rims for calliper brakes, 55-80mm high, break surface distance 24,5mm, Aero widths 28mm DT SWISS 240 Straight Pull Tune "Mig 45/Mag 150" 16 front / 20 rear 16 front / 20 rear 1430 g/per pair +/- 7,5% 1370 g/per pair +/- 7,5% 2449,- 2599,-

7 ax.premium MTB 26" 960 g Light rims are responsible for extremely low acceleration values so that not even the tiniest bit of energy is wasted on uphill climbs; these stable rims with a high spoke tension of 1300 N also ensure maximum stiffness. Thanks to the stress-optimized reinforced spoke holes laminated and reinforced during production no additional drilling is necessary, making weaknesses in structure a thing of the past. This guarantees safe and accurate downhill handling and makes these wheelsets the real kings of the hill, while their profile lets them strut their stuff even on flat surfaces. By using materials from Formula 1 not freely available on the market and exceptional manufacturing processes, ax.specialists have succeeded in developing the Premium MTB 26 tubular rim wheelset with the sensationally low weight of only 960 grams (+/- 5%) per set. Thanks to special lamination techniques the robustness allows for a rider weight of up to an impressive 110 kilograms. "Form follows function" becomes "form follows flow" with the Premium MTB wheelsets. Through its extraordinary rim shape, which almost looks like a heart in its cross-section, the ax-lightness wheelsets can overcome practically any obstacle. Even when riding through deep sand, ruts or mud, the tires practically dig themselves out thanks to the Easy Release Technology so the rider quickly regains a secure grip under the wheels. From an optical perspective the Premium MTB wheelsets are enticing with their modern and unique design. The wheelset is available with Tune or Extralite. Premium wheelset 26" - Tune Premium wheelset 26" - Extralite ax.mtb CC 26 Full carbon tubular rims for disc brakes, 230 g / pc. ax.mtb CC 26 Full carbon tubular rims for disc brakes, 230 g / pc. Tune Prince/Princess Extralite 28 front & rear 28 front & rear 995 g/per pair (without sticker; incl. sticker + 25 grams) +/- 5% 960 g/per pair (without sticker; incl. sticker + 25 grams) +/- 5% 2299,- 2299,-

8 ax.premium MTB 650b 990 g Light rims are responsible for extremely low acceleration values so that not even the tiniest bit of energy is wasted on uphill climbs; these stable rims with a high spoke tension of 1300 N also ensure maximum stiffness. Thanks to the stress-optimized reinforced spoke holes laminated and reinforced during production no additional drilling is necessary, making weaknesses in structure a thing of the past. This guarantees safe and accurate downhill handling and makes these wheelsets the real kings of the hill, while their profile lets them strut their stuff even on flat surfaces. By using materials from Formula 1 not freely available on the market and exceptional manufacturing processes, ax.specialists have succeeded in developing the Premium MTB 650b tubular rim wheelset with the sensationally low weight of only 990 grams (+/- 5%) per set. Thanks to special lamination techniques the robustness allows for a rider weight of up to an impressive 110 kilograms. "Form follows function" becomes "form follows flow" with the Premium MTB wheelsets. Through its extraordinary rim shape, which almost looks like a heart in its cross-section, the ax-lightness wheelsets can overcome practically any obstacle. Even when riding through deep sand, ruts or mud, the tires practically dig themselves out thanks to the Easy Release Technology so the rider quickly regains a secure grip under the wheels. From an optical perspective the Premium MTB wheelsets are enticing with their modern and unique design. The wheelset is available with Tune or Extralite. Premium wheelset MTB 650b - Tune Premium wheelset MTB 650b - Extralite ax.mtb CC 27,5" Full carbon tubular rims for disc brakes, 240 g / pc ax.mtb CC 27,5" Full carbon tubular rims for disc brakes, 240 g / pc Tune Prince/Princess Extralite 32 front & rear 32 front & rear 1025 g/per pair (without sticker; incl. sticker + 25 grams) +/- 5% 990 g/per pair (without sticker; incl. sticker + 25 grams) +/- 5% 2399,- 2399,-

9 1080 g ax.premium MTB 29" The lightest 29" wheelset in its category: 29" mountain bikes continue to gain popularity in A key to fun and success in cycling is having the right equipment. In addition to the lowest possible weight, the main focus in the development of our 29" MTB wheelsets was placed on achieving maximum functionality without compromising or setting limitations on handling. New ax.technologies zero in on details and ensure that our wheelsets get you safely up the hill and back down again. Our lightweight wheelsets already claimed a number of World Cup wins in Light rims are responsible for extremely low acceleration values so that not even the tiniest bit of energy is wasted on uphill climbs; these stable rims with a high spoke tension of 1300 N also ensure maximum stiffness. Thanks to the stress-optimized reinforced spoke holes laminated and reinforced during production no additional drilling is necessary, making weaknesses in structure a thing of the past. This guarantees safe and accurate downhill handling and makes these wheelsets the real kings of the hill, while their profile lets them strut their stuff even on flat surfaces. By using materials from Formula 1 not freely available on the market and exceptional manufacturing processes, ax.specialists have succeeded in developing the Premium MTB 29 tubular rim wheelset with the sensationally low weight of only 1080 grams (+/- 5%) per set. Thanks to special lamination techniques the robustness allows for a rider weight of up to an impressive 110 kilograms. "Form follows function" becomes "form follows flow" with the Premium MTB wheelsets. Through its extraordinary rim shape, which almost forms a heart in its cross-section, the ax-lightness wheelsets can overcome practically any obstacle. Even when riding through Modell Premium wheelset 29" - Tune Premium wheelset 29" - Extralite ax.mtb CC 29 Full carbon tubular rims for disc brakes, 255 g / pc. ax.mtb CC 29 Full carbon tubular rims for disc brakes, 255 g / pc. Tune Prince/Princess Extralite 32 front & rear 32 front & rear 1115 grams / per pair (without sticker; incl. sticker + 25 grams) +/- 5% 1080 grams / per pair (without sticker; incl. sticker + 25 grams) +/- 5% 2399,- 2399,-

10 ax.mtb 29" Clincher 1210 g "Traction", "grip" and "damping". These are the keywords you require of a tyre if both the terrain and conditions are getting hard. A tyre, however, can only develop its potential if it is provided with the right requirements. are the key to this. A wide rim makes a tyre really come up. Only now, the rim is able to offer vertical damping at a low air pressure without side-swerving in curves at the same time. Owing to the lower ridable air pressure, the tyre is able to adapt to the subsurface and to develop a better grip and traction. The improved vertical damping also ensures this and protects the cyclist. Result: Better cycling performance!! However, then there is the risk that the tyre detaches from the flanges during flexing. This is not uncommon with carbon rims. Most manufacturers go without a flange because by doing so a rim is easier to produce at a reduced rate. Our ax-lightness MTB clincher is equipped with a very deep undercut in order to provide you maximum safety. The high diameter of 29 wheels limits their manoeuvrability. Frames get heavier and softer at the same time. Changes of direction and hard accelerations considerably worsen. Thanks to our SRT technology in combination with the voluminous cross section of the rim our wheelsets are very stiff. The low weight of the rim ensures good acceleration and best manoeuvrability. Modell Premium wheelset Clincher - Extralite ax.mtb CC 29 Full carbon clincher rims for disc brakes Extralite 32 front & rear 1210 grams / per pair (without sticker; incl. sticker + 25 grams) +/- 5% 2899,-

11 ax.srt g (piece) Ascents, acceleration and sprints are a breeze with our AX-. The new AX- were developed from scratch and have what it takes to win with innovative features such as SRT (spoke reinforcement technology) or SBS (seamless brake surface). In addition to the lowest possible weight, the main focus of development was placed on the most functionality possible without making compromises or posing limitations. All rims are approved for a rider weight of 110 kilograms. SRT - spoke reinforcement technology In manufacturing, laminated, stress-tested reinforced spoke holes make additional drilling and, as a result, weaknesses in structure a thing of the past. The drawn-out nipple seatings also ensure perfectly aligned nipples. As a result, the rims work without a general limit on spoke tension we spoke our own wheels with 1300 N! SBS seamless brake surface The one-piece, seamless brake surface provides a perfectly planar brake surface and completely eliminates brake judder or stutter. This is a real advantage in terms of safety. For optimum functionality, we recommend using carbon-specific brake linings on our rims. Construction type Full carbon tubular rim for calliper brakes Height x Width 24 mm x 21,5 mm 20, 24 holes 215 grams (without sticker, incl. sticker +10 grams) +/- 5% 719,-

12 ax.srt g (piece) Ascents, acceleration and sprints are a breeze with our AX-. The new AX- were developed from scratch and have what it takes to win with innovative features such as SRT (spoke reinforcement technology) or SBS (seamless brake surface). In addition to the lowest possible weight, the main focus of development was placed on the most functionality possible without making compromises or posing limitations. All rims are approved for a rider weight of 110 kilograms. SRT - spoke reinforcement technology In manufacturing, laminated, stress-tested reinforced spoke holes make additional drilling and, as a result, weaknesses in structure a thing of the past. The drawn-out nipple seatings also ensure perfectly aligned nipples. As a result, the rims work without a general limit on spoke tension we spoke our own wheels with 1300 N! SBS seamless brake surface The one-piece, seamless brake surface provides a perfectly planar brake surface and completely eliminates brake judder or stutter. This is a real advantage in terms of safety. For optimum functionality, we recommend using carbon-specific brake linings on our rims. Construction type Full carbon tubular rim for calliper brakes Height x Width 42 mm x 21,5 mm 16, 20, 24 holes 275 grams (without sticker, incl. sticker +10 grams) +/- 5% 769,-

13 ax.srt 55 Aero 375 g (piece) No other part of your racing bike shows weaknesses as obviously as the wheelsets do., stiffness and aerodynamics are an explosive combination. Our SRT technology enables us to construct very light and yet stiff bikes, which we have been demonstrating for years. The only thing that was still missing with regard to the ultimative wheelset was aerodynamics at the highest level. With the aid of the latest CFD computer simulations, a rim shape was developed which leaves nothing more to be desired: Propulsion or also sail effect and a steering moment as neutral as possible were developed close to optimum in countless simulation loops. Therefore, cross winds can hardly do you any harm. On the contrary! These rims even generate a sail effect instead of steering you off the track. Internally arranged nipples and a spoke number of 16/20 minimise disruptive influences. The total weight of just around 1140 grams gives you a striking advantage uphill! There are people who know exactly what is important it is for these people that we have developed the SRT and stream technologies. Construction type Full carbon tubular rim for calliper brakes Height x Width 55 mm x 24,5 mm 16, 20 holes 375 grams +/- 5% 890,-

14 ax.srt 80 Aero 530 g (piece) No other part of your racing bike shows weaknesses as obviously as the wheelsets do., stiffness and aerodynamics are an explosive combination. Our SRT technology enables us to construct very light and yet stiff bikes, which we have been demonstrating for years. The only thing that was still missing with regard to the ultimative wheelset was aerodynamics at the highest level. With the aid of the latest CFD computer simulations, a rim shape was developed which leaves nothing more to be desired: Propulsion or also sail effect and a steering moment as neutral as possible were developed close to optimum in countless simulation loops. Therefore, cross winds can hardly do you any harm. On the contrary! These rims even generate a sail effect instead of steering you off the track. Internally arranged nipples and a spoke number of 16/20 minimise disruptive influences. The total weight of just around 1490 grams gives you a striking advantage uphill! There are people who know exactly what is important it is for these people that we have developed the SRT and stream technologies. Construction type Full carbon tubular rim for calliper brakes Height x Width 80 mm x 24 mm 16, 20 holes 530 grams +/- 5% 990,-

15 ax.srt CC 26" 230 g (piece) Ascents, acceleration and sprints are a breeze with our AX-. The new AX- were developed from scratch and have what it takes to win with innovative features such as SRT (spoke reinforcement technology). In addition to the lowest possible weight, the main focus of development was placed on the most functionality possible without making compromises or posing limitations. All rims are approved for a rider weight of 110 kilograms. SRT - spoke reinforcement technology In manufacturing, laminated, stress-tested reinforced spoke holes make additional drilling and, as a result, weaknesses in structure a thing of the past. The drawn-out nipple seatings also ensure perfectly aligned nipples. As a result, the rims work without a general limit on spoke tension we spoke our own wheels with 1300 N! Construction type Full carbon tubular rim 26" for disc brakes Height x Width 28 mm x 25,5 mm 28 holes 230 grams (without sticker, incl. sticker +10 grams) +/- 5% 719,-

16 ax.srt CC 650b 240 g (piece) Ascents, acceleration and sprints are a breeze with our AX-. The new AX- were developed from scratch and have what it takes to win with innovative features such as SRT (spoke reinforcement technology). In addition to the lowest possible weight, the main focus of development was placed on the most functionality possible without making compromises or posing limitations. All rims are approved for a rider weight of 110 kilograms. SRT - spoke reinforcement technology In manufacturing, laminated, stress-tested reinforced spoke holes make additional drilling and, as a result, weaknesses in structure a thing of the past. The drawn-out nipple seatings also ensure perfectly aligned nipples. As a result, the rims work without a general limit on spoke tension we spoke our own wheels with 1300 N! Construction type Full carbon tubular rim 650b for disc brakes Height x Width 28 mm x 25,5 mm 28 holes 240 grams (without sticker, incl. sticker +10 grams) +/- 5% 769,-

17 ax.srt CC 29" 255 g (piece) Ascents, acceleration and sprints are a breeze with our AX-. The new AX- were developed from scratch and have what it takes to win with innovative features such as SRT (spoke reinforcement technology). In addition to the lowest possible weight, the main focus of development was placed on the most functionality possible without making compromises or posing limitations. All rims are approved for a rider weight of 110 kilograms. SRT - spoke reinforcement technology In manufacturing, laminated, stress-tested reinforced spoke holes make additional drilling and, as a result, weaknesses in structure a thing of the past. The drawn-out nipple seatings also ensure perfectly aligned nipples. As a result, the rims work without a general limit on spoke tension we spoke our own wheels with 1300 N! Construction type Full carbon tubular rim 29" for disc brakes Height x Width 28 mm x 25,5 mm 32 holes 255 grams (without sticker, incl. sticker +10 grams) +/- 5% 769,-

18 ax.srt CC 29" Clincher 325 g (piece) Ascents, acceleration and sprints are a breeze with our AX-. The new AX- were developed from scratch and have what it takes to win with innovative features such as SRT (spoke reinforcement technology). In addition to the lowest possible weight, the main focus of development was placed on the most functionality possible without making compromises or posing limitations. All rims are approved for a rider weight of 110 kilograms. SRT - spoke reinforcement technology In manufacturing, laminated, stress-tested reinforced spoke holes make additional drilling and, as a result, weaknesses in structure a thing of the past. The drawn-out nipple seatings also ensure perfectly aligned nipples. As a result, the rims work without a general limit on spoke tension we spoke our own wheels with 1300 N! Construction type Full carbon clincher rim 29" for disc brakes Height x Width 30 mm x 33,5 mm 32 holes 325 grams (without sticker, incl. sticker +10 grams) +/- 5% 950,-