WLS28-2 Dual Color LED Strip Light

Transcription

1 WLS8- Dual Color LED Strip Light Datasheet Banner s LED Strip Lights have sturdy aluminum housings, shatterproof windows, and impressive environmental ratings, making them an ideal general-purpose LED light for machine, enclosure, or other industrial lighting applications. Having two colors in one device make these ideal for mobile vehicle, machine status, and vision lighting applications. Low-profile, space-saving design Rugged, water-resistant IP69K option Available in eight lengths from 5 mm to 0 mm Lensed models or choice of clear or diffuse window Daisy chain power to multiple lights Optional snap clips for easy installation and repositioning Optional switch for color selection and control Automatic temperature protection built into the unit. Above 50 C, the light dims to manage heat and protect product lifetime NOTE: When cascading lights, a model with a color selection switch can be used to control the lights cascaded off the switched model. Stand-Alone Light cable Stand-Alone Light or End Light in a Cascade QD First Light in a Cascade cable First or Middle of a Cascade QD WLS8- LED Strip Lights are available as either stand-alone models, or as cascade models that can be "daisy-chained" together for a continuous length of lighting, with a minimum of wiring. Stand-alone models have cable or male QD fitting at one end for power connection, no connections at opposite end. A stand-alone model may be used as the last in the cascade series. Cascade models have cable or male QD fitting at one end for power connection, female QD fitting at opposite end for connection to other lights in the cascade. Cascade models with cable end can only be used as the first light in the cascade series. A double-ended accessory cordset must be used between each pair of lights in a cascade. Models Family Cascadable Colors (C) / Density (D) C D C D Lighted Length (mm) Window Construction Power Switch Connector WLS8- X W R 85 D X Q C = Cascadable X = Non-cascadable W = Daylight white B = Blue G = Green R = Red Y = Yellow Blank = 00% = 50% = % Blank = Clear plastic D = Diffused plastic L5 = 5 lensed window S = Sealed * X = Not sealed Blank = None PB = Color / Off / Color * Sealed models not available with On/Off Switch Blank = m integral cable Q = -pin Euro-style QD (mating cordset required) Density (D) is defined by the quantity of LEDs populated on the circuit. For example, at 00% density, there are 8 LEDs per 85 mm, and at 50% density, there are 9 LEDs per 85 mm. The lumen output decreases proportionally with density. Original Document 879 Rev. E 8 December

2 WLS8- Dual Color LED Strip Light Sample Model Number WLS8-XWR-570XQ WLS8-XWR-85SQ WLS8-CWR-850XQ WLS8-XWR-0X WLS8-XWR-85XPBQ Description Non Cascade, White (00% Density), Red (00% Density), 570 mm, Unsealed, -pin M/Euro-style quick disconnect connector Non Cascade, White (00% Density), Red (00% Density), 85 mm, Sealed, -pin M/Euro-style quick disconnect connector Cascadable, White (00% Density), Red (00% Density), 850 mm, Unsealed, -pin M/Euro-style quick disconnect connector Non Cascade, White (00% Density), Red (50% Density),0 mm, Unsealed, m integral cable with flying leads Non-Cascade, White (00% Density), Red (50% Density), 85 mm, Unsealed, Color /OFF / Color rocker switch, - pin M/Euro-style quick disconnect connector Wiring Diagram Male Female Pin Wire Color Connection brown Color : to 0 V dc blue dc common black Color : to 0 V dc (color overrides color ) white Not used Specifications Operating Voltage V dc to 0 V dc Use only with suitable Class power supply (UL) or a SELV power supply (CE). Light Length (mm) Typical Current (A) V dc V dc 0 V dc Max. Current (A) Light Characteristics - Daylight White Color Temperature (CCT): K Lumen output: 75 (± 5%) per 85 mm, typical at 5 C (77 F) CRI: 8, typical Light Characteristics - Other Colors Color Typical Wavelength or Color Temperature Typical Intensity (per 85 mm) Push Button II = Color I = Color 0 = Off Connections Integral -pin M male quick disconnect (QD) (-pin connecting cordset required); or m (6.5 ft) integral cable Mounting () swivel brackets SMBWLS8RA included and () screws Construction Clear anodized aluminum housing; painted zinc end caps; polycarbonate window on clear and diffuse plastic models; acrylic window on L5 models; zinc plated steel brackets Environmental Rating IEC IP50 (non-sealed models) or IEC IP65, IEC IP67, IEC IP69K per DIN 0050 (sealed models) Vibration and Mechanical Shock Vibration 0-55 Hz.0 mm p-p amplitude per IEC Shock 5G ms duration, half sine wave per IEC Operating Temperature 0 C to +70 C ( 0 F to +58 F) Light output begins to decrease above 50 C ( F) and will be approximately 65% of max intensity at 60 C (0 F) and 0% of max intensity at 70 C (58 F) Storage Temperature 0 C to +70 C ( 0 F to +58 F) Certifications Red 65 nm 00 Yellow 590 nm 50 Green 55 nm 00 Blue 70 nm 0 NOTE: Do not spray cable with highpressure sprayer, or cable damage will result. Application Notes When connecting cascadable lights in series it is important not to exceed maximum current limitations: Maximum length of light at V dc:. m (.6 ft) Maximum length of light at V dc:.0 m (9.8 ft) Maximum length of light at 0 V dc:. m (0. ft) Lumen values are reduced by 5% on diffused window models. - Tel: P/N 879 Rev. E

3 WLS8- Dual Color LED Strip Light Dimensions L5 Models [.55] 8 [.0] 8 [.]. [.7] [.8].5 [.5] 8 [.0] 9.5 [.7] 9 [.75] 0 [.8].5 [.5] Motion Detector Models.0 [.8] 6.9 [.5] ø.7 [.58] ON/OFF Switch Models 0.8 [.8] X M X.50 ISO 7.5 [.0] ø 5 [.0] 0.5 [.].5 [.] 0 [.8] 0.8 [.8] Dimensions are shown with the included SMBWLS8RA bracket. Non-Switch Models IP50 Models IP67/IP69K Models L L L L WLS8-..5X WLS8-..5S mm (8.7 in) 05 mm (8. in) 5 mm (5.7 in) 75 mm (6.9 in) WLS8-..85X WLS8-..85S 6 mm (. in) 6 mm (.6 in) 86 mm (.6 in) 6 mm (. in) WLS8-..0X WLS8-..0S 50 mm (9.8 in) 87 mm (9. in) 7 mm (6.8 in) 57 mm (8.0 in) WLS X WLS S 6 mm (5. in) 68 mm (.7 in) 568 mm (.6 in) 598 mm (.5 in) WLS8-..70X WLS8-..70S 785 mm (0.9 in) 769 mm (0. in) 709 mm (7.9 in) 79 mm (9. in) WLS X WLS S 96 mm (6.5 in) 90 mm (5.8 in) 850 mm (.6 in) 880 mm (.6 in) WLS X WLS S 067 mm ( in) 05 mm (. in) WLS8-..0X WLS8-..0S 08 mm (7.6 in) 9 mm (6.9 in) 99 mm (9.0 in) 0 mm (0. in) mm (.57 in) 6 mm (5.7 in) ON/OFF Switch Models Model L L L L WLS8-..5XPB 5 mm (9.9 in) 5 mm (9. in) 5 mm (5.7 in) 05 mm (8. in) WLS8-..85XPB 9 mm (5. in) 76 mm (.8 in) 86 mm (.6 in) 6 mm (.6 in) WLS8-..0XPB 5 mm (.0 in) 57 mm (0. in) 7 mm (6.8 in) 87 mm (9. in) WLS XPB 67 mm (6.5 in) 658 mm (5.9 in) 568 mm (.6 in) 68 mm (.7 in) WLS8-..70XPB 85 mm (. in) 799 mm (.5 in) 709 mm (7.9 in) 769 mm (0. in) WLS XPB 956 mm (7.6 in) 90 mm (7 in) 850 mm (.6 in) 90 mm (5.8 in) WLS XPB 097 mm (. in) 08 mm (.6 in) 99 mm (9.0 in) 05 mm (. in) WLS8-..0XPB 8 mm (8.7 in) mm (8. in) mm (.57 in) 9 mm (6.9 in) Accessories Cordsets Use single-ended cordsets between the power source and the QD connection of a stand-alone light or the first light in a cascade. Use double-ended cordsets between lights in a cascade. P/N 879 Rev. E - Tel:

4 WLS8- Dual Color LED Strip Light -Pin Threaded M/Euro-Style Cordsets Model Length Style Dimensions Pinout (Female) MQDC-06.8 m (6 ft) Typ. MQDC-5 MQDC-0 MQDC-50 MQDC-06RA MQDC-5RA MQDC-0RA MQDC-50RA.57 m (5 ft) 9. m (0 ft) 5. m (50 ft).8 m (6 ft).57 m (5 ft) 9. m (0 ft) 5. m (50 ft) Straight Right-Angle M x ø.5 [0.57"] Typ. [.6"] M x ø.5 0 Typ. [.8"] = Brown = White = Blue = Black -Pin Threaded M/Euro-Style Cordsets Double Ended Model Length Style Dimensions Pinout MQDEC-0SS 0. m ( ft) Female MQDEC-0SS MQDEC-06SS MQDEC-SS 0.9 m ( ft).8 m (6 ft).66 m ( ft) 0 Typ. [.58"] MQDEC-0SS MQDEC-0SS MQDEC-50SS 6.0 m (0 ft) 9. m (0 ft) 5. m (50 ft) Male Straight/ Female Straight M x ø.5 [0.57"] Typ. [.7"] M x ø.5 [0.57"] Male = Brown = White = Blue = Black -Pin Threaded M/Euro-Style Splitter Cordsets Flat Junction Model Branches (Female) Trunk (Male) Pinout CSB-M0M0 No branch No trunk Female CSB-M0M CSB-MM CSB-M8M No trunk 0.0 m ( ft).50 m (8 ft) CSB-M5M.57 m (5 ft) Male CSB-M5M 7.60 m (5 ft) x 0.0 m ( ft) CSB-UNT5M 7.60 m (5 ft) Unterminated = Brown = White = Blue = Black - Tel: P/N 879 Rev. E

5 WLS8- Dual Color LED Strip Light -Pin Threaded M/Euro-Style Splitter Cordsets Flat Junction Model Branches (Female) Trunk (Male) Pinout 0 Typ. [.58"] Ø.5 [0.8"] 8.0 [0.7"] Typ. [.7"] Ø.5 [0.57"] Ø.5 [0.57"] M x M x 5 [.8"].0 [.69"] Brackets SMBWLS8RA The bracket kit is available as a replacement for the one that comes with the Work Light Strip. The kit contains two end brackets and four screws. SMBWLS8SM This kit allows the light to be mounted at a right angle to the mounting surface. The kit contains two end brackets and four screws. SMBWLS8SP Stainless steel snap bracket kit Includes two brackets SMH6 This kit allows the light to be mounted to a /6-inch Unistrut channel. The kit includes: #0- spring nuts (qty ) #0- socket head cap screws (qty ) #0 lock washers (qty ) SMBWLSMAG Magnetic mounting bracket for easy attachment to steel surfaces SMBWLSMAGR Protective cover also available to prevent scratches to painted surfaces P/N 879 Rev. E - Tel:

6 WLS8- Dual Color LED Strip Light Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: Banner Engineering Corp. All rights reserved