WLS28-2 LED Strip Light

Transcription

1 Datasheet Banner s LED Strip Lights have sturdy aluminum housings, shatterproof windows, and impressive environmental ratings, making them an ideal general-purpose LED light for machine, enclosure, or other industrial lighting applications. 0% brighter and 0% more efficient than previous model Low-profile, space-saving design Rugged, water-resistant IP69K option Available in eight lengths from 5 mm to 0 mm Lensed models or choice of clear or diffuse window Daisy chain power to multiple lights NOTE: When cascading lights, a model with an ON/OFF switch can be used to control the lights cascaded off the switched model. New Features Enhanced light quality: brighter, closer spaced LEDs Optional snap clips for easy installation and repositioning Capability to dim lights using the wiring pinout (Hi/Lo/Off) Optional switch is now Hi/Lo/Off Automatic temperature protection built into the unit. Above 50 C, the light dims to manage heat and protect product lifetime Motion sensing models available Stand-Alone Light cable Stand-Alone Light or End Light in a Cascade QD First Light in a Cascade cable First or Middle of a Cascade QD WLS8- Work Light Strips are available as either stand-alone models, or as cascade models that can be "daisy-chained" together for a continuous length of lighting, with a minimum of wiring. Stand-alone models have cable or male QD fitting at one end for power connection, no connections at opposite end. A stand-alone model may be used as the last in the cascade series. Cascade models have cable or male QD fitting at one end for power connection, female QD fitting at opposite end for connection to other lights in the cascade. Cascade models with cable end can only be used as the first light in the cascade series. A double-ended accessory cordset must be used between each pair of lights in a cascade. Models Family WLS8- Cascadable LED Color Lighted Length (mm) Window Construction Connector C W 5 D X Q C = Cascadable X = Non-cascadable W = Cool white WW = Warm white R = Red G = Green B = Blue Y = Yellow X = Not sealed S = Sealed Blank = Clear plastic D = Diffused plastic L5 = 5 deg lensed window Blank = None M = Motion Switch PB = High/Lo/Off Switch Blank = m integral cable Q = Integral -pin M QD* * Requires a mating cordset Sealed models not available with Hi/Lo/Off or motion switch Original Document Rev. H 8 December

2 Table : IP50 Models Non-Switch Models HIGH/OFF/LOW Switch Models Motion Switch Models Stand-Alone Cascade Stand-Alone Cascade Stand-Alone Cascade Lighted Length Power Connector WLS8-XW5X WLS8-CW5X WLS8-XW5XPB WLS8-CW5XPB WLS8-XW5XM WLS8-CW5XM 5 mm WLS8-XW85X WLS8-CW85X WLS8-XW85XPB WLS8-CW85XPB WLS8-XW85XM WLS8-CW85XM 85 mm WLS8-XW0X WLS8-CW0X WLS8-XW0XPB WLS8-CW0XPB WLS8-XW0XM WLS8-CW0XM 0 mm WLS8-XW570X WLS8-CW570X WLS8-XW570XPB WLS8-CW570XPB WLS8-XW570XM WLS8-CW570XM 570 mm WLS8-XW70X WLS8-CW70X WLS8-XW70XPB WLS8-CW70XPB WLS8-XW70XM WLS8-CW70XM 70 mm m (6.5 ft) cable WLS8-XW850X WLS8-CW850X WLS8-XW850XPB WLS8-CW850XPB WLS8-XW850XM WLS8-CW850XM 850 mm WLS8-XW990X WLS8-CW990X WLS8-XW990XPB WLS8-CW990XPB WLS8-XW990XM WLS8-CW990XM 990 mm WLS8-XW0X WLS8-CW0X WLS8-XW0XPB WLS8-CW0XPB WLS8-XW0XM WLS8-CW0XM 0 mm Integral m (6.5 ft) unterminated cable models are listed. To order the -pin M/Euro-style integral quick disconnect model, add the suffix "Q" to the model number. For example, WLS8-XW85XQ. Table : IP67/IP69K Models Stand-Alone Model Cascade Lighted Length Connector WLS8-XW5S WLS8-CW5S 5 mm WLS8-XW85S WLS8-CW85S 85 mm WLS8-XW0S WLS8-CW0S 0 mm WLS8-XW570S WLS8-CW570S 570 mm WLS8-XW70S WLS8-CW70S 70 mm m (6.5 ft) cable WLS8-XW850S WLS8-CW850S 850 mm WLS8-XW990S WLS8-CW990S 990 mm WLS8-XW0S WLS8-CW0S 0 mm Integral m (6.5 ft) unterminated cable models are listed. To order the -pin M/Euro-style integral quick disconnect model, add the suffix "Q" to the model number. For example, WLS8-XW85SQ. Wiring Diagram Male Female Pin Wire Color Connection Brown V dc to 0 V dc Blue dc common Black Models without motion detection: Connect to V dc to 0 V dc for 50% max. intensity Models with motion detection: Connect to V dc to 0 V dc to bypass the motion detector switch White Not used For maximum intensity, leave the black wire floating or connected to common. - Tel: P/N Rev. H

3 Specifications Supply Voltage and Current V dc to 0 V dc Use only with a suitable Class power supply (UL) or SELV power supply (CE) Use only with suitable Class power supply (UL) or a SELV power supply (CE). Supply Protection Circuitry Protected against reverse polarity and transient voltages Light Characteristics Cool white Color Temperature (CCT): K Lumen output: 650 (± 5%) per foot, typical at 5 C (77 F) Luminous efficacy: 90 lumens/watt typical at V dc at 5 C (77 F) CRI: 85, typical Warm white: K Green: 55 nm Red: 68 nm Yellow: 590 nm Blue: 60 nm LED Lifetime Lumen Maintenance - L 70 When operating within specifications, output will decrease less than 0% after 50,000 hours. Push Button II = 00% light intensity I = 50% light intensity 0 = Off Models with Motion Detection Light turns off after approximately 60 seconds without detecting motion Range: meters; ± 5 field of view Standby current: 70 µa Construction Clear anodized aluminum housing; painted zinc end caps; polycarbonate window on clear and diffuse plastic models; acrylic window on L5 models; zinc plated steel brackets Mounting () swivel brackets SMBWLS8RA included and () screws Table : Typical Current Connections Integral -pin M male quick disconnect (QD) (-pin connecting cordset required); or m (6.5 ft) integral cable Environmental Rating IEC IP50 (non-sealed models) or IEC IP65, IEC IP67, IEC IP69K per DIN 0050 (sealed models) Vibration and Mechanical Shock Vibration 0-55 Hz.0 mm p-p amplitude per IEC Shock 5G ms duration, half sine wave per IEC Operating Temperature Models without motion detection: 0 C to +70 C ( 0 F to +58 F) Models with motion detection: 0 C to +60 C ( F to +0 F) Light output begins to decrease above 50 C ( F) and will be approximately 65% of max intensity at 60 C (0 F) and 0% of max intensity at 70 C (58 F) Storage Temperature 0 C to +70 C ( 0 F to +58 F) Certifications Application Note When connecting cascadable lights in series at 00% intensity, it is important not to exceed maximum current limitations: Maximum length of light at V dc:. m (.6 ft) Maximum length of light at V dc:.0 m (9.8 ft) Maximum length of light at 0 V dc:. m (0. ft) At 50% intensity, double the lengths. NOTE: Do not spray cable with highpressure sprayer, or cable damage will result. Light Length Typical Current Max. Current V dc V dc 0 V dc A Cool White Warm White Lumens C) Green Red Yellow Blue 5 mm 0. A 0.5 A 0. A mm 0.66 A 0.0 A 0. A mm.0 A 0.6 A 0.6 A mm.6 A 0.6 A 0.8 A mm.75 A 0.77 A 0.60 A mm. A 0.9 A 0.7 A mm.59 A.08 A 0.85 A mm.0 A. A 0.97 A Lumen values lowered by 5% on diffused window models. P/N Rev. H - Tel:

4 Dimensions L5 Models [.55] 8 [.0] 8 [.]. [.7] [.8].5 [.5] 8 [.0] 9.5 [.7] 9 [.75] 0 [.8].5 [.5] Motion Detector Models.0 [.8] 6.9 [.5] ø.7 [.58] ON/OFF Switch Models 0.8 [.8] X M X.50 ISO 7.5 [.0] ø 5 [.0] 0.5 [.].5 [.] 0 [.8] 0.8 [.8] Dimensions are shown with the included SMBWLS8RA bracket. Non-Switch Models IP50 Models IP67/IP69K Models L L L L WLS8-..5X WLS8-..5S mm (8.7 in) 05 mm (8. in) 5 mm (5.7 in) 75 mm (6.9 in) WLS8-..85X WLS8-..85S 6 mm (. in) 6 mm (.6 in) 86 mm (.6 in) 6 mm (. in) WLS8-..0X WLS8-..0S 50 mm (9.8 in) 87 mm (9. in) 7 mm (6.8 in) 57 mm (8.0 in) WLS X WLS S 6 mm (5. in) 68 mm (.7 in) 568 mm (.6 in) 598 mm (.5 in) WLS8-..70X WLS8-..70S 785 mm (0.9 in) 769 mm (0. in) 709 mm (7.9 in) 79 mm (9. in) WLS X WLS S 96 mm (6.5 in) 90 mm (5.8 in) 850 mm (.6 in) 880 mm (.6 in) WLS X WLS S 067 mm ( in) 05 mm (. in) WLS8-..0X WLS8-..0S 08 mm (7.6 in) 9 mm (6.9 in) 99 mm (9.0 in) 0 mm (0. in) mm (.57 in) 6 mm (5.7 in) ON/OFF Switch Models Model L L L L WLS8-..5XPB 5 mm (9.9 in) 5 mm (9. in) 5 mm (5.7 in) 05 mm (8. in) WLS8-..85XPB 9 mm (5. in) 76 mm (.8 in) 86 mm (.6 in) 6 mm (.6 in) WLS8-..0XPB 5 mm (.0 in) 57 mm (0. in) 7 mm (6.8 in) 87 mm (9. in) WLS XPB 67 mm (6.5 in) 658 mm (5.9 in) 568 mm (.6 in) 68 mm (.7 in) WLS8-..70XPB 85 mm (. in) 799 mm (.5 in) 709 mm (7.9 in) 769 mm (0. in) WLS XPB 956 mm (7.6 in) 90 mm (7 in) 850 mm (.6 in) 90 mm (5.8 in) WLS XPB 097 mm (. in) 08 mm (.6 in) 99 mm (9.0 in) 05 mm (. in) WLS8-..0XPB 8 mm (8.7 in) mm (8. in) mm (.57 in) 9 mm (6.9 in) Accessories Cordsets Use single-ended cordsets between the power source and the QD connection of a stand-alone light or the first light in a cascade. Use double-ended cordsets between lights in a cascade. - Tel: P/N Rev. H

5 -Pin Threaded M/Euro-Style Cordsets Model Length Style Dimensions Pinout (Female) MQDC-06.8 m (6 ft) Typ. MQDC-5 MQDC-0 MQDC-50 MQDC-06RA MQDC-5RA MQDC-0RA MQDC-50RA.57 m (5 ft) 9. m (0 ft) 5. m (50 ft).8 m (6 ft).57 m (5 ft) 9. m (0 ft) 5. m (50 ft) Straight Right-Angle M x ø.5 [0.57"] Typ. [.6"] M x ø.5 0 Typ. [.8"] = Brown = White = Blue = Black -Pin Threaded M/Euro-Style Cordsets Double Ended Model Length Style Dimensions Pinout MQDEC-0SS 0. m ( ft) Female MQDEC-0SS MQDEC-06SS MQDEC-SS 0.9 m ( ft).8 m (6 ft).66 m ( ft) 0 Typ. [.58"] MQDEC-0SS MQDEC-0SS MQDEC-50SS 6.0 m (0 ft) 9. m (0 ft) 5. m (50 ft) Male Straight/ Female Straight M x ø.5 [0.57"] Typ. [.7"] M x ø.5 [0.57"] Male = Brown = White = Blue = Black -Pin Threaded M/Euro-Style Splitter Cordsets Flat Junction Model Branches (Female) Trunk (Male) Pinout CSB-M0M0 No branch No trunk Female CSB-M0M CSB-MM CSB-M8M No trunk 0.0 m ( ft).50 m (8 ft) CSB-M5M.57 m (5 ft) Male CSB-M5M 7.60 m (5 ft) x 0.0 m ( ft) CSB-UNT5M 7.60 m (5 ft) Unterminated = Brown = White = Blue = Black P/N Rev. H - Tel:

6 -Pin Threaded M/Euro-Style Splitter Cordsets Flat Junction Model Branches (Female) Trunk (Male) Pinout 0 Typ. [.58"] Ø.5 [0.8"] 8.0 [0.7"] Typ. [.7"] Ø.5 [0.57"] Ø.5 [0.57"] M x M x 5 [.8"].0 [.69"] Brackets SMBWLS8RA The bracket kit is available as a replacement for the one that comes with the Work Light Strip. The kit contains two end brackets and four screws. SMBWLS8SM This kit allows the light to be mounted at a right angle to the mounting surface. The kit contains two end brackets and four screws. SMBWLS8SP Stainless steel snap bracket kit Includes two brackets SMH6 This kit allows the light to be mounted to a /6-inch Unistrut channel. The kit includes: #0- spring nuts (qty ) #0- socket head cap screws (qty ) #0 lock washers (qty ) SMBWLSMAG Magnetic mounting bracket for easy attachment to steel surfaces SMBWLSMAGR Protective cover also available to prevent scratches to painted surfaces Tel: P/N Rev. H

7 Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: Banner Engineering Corp. All rights reserved